security mode?

Similar Questions

• How can I disable the Security Mode to allow me to watch Youtube videos.

  Hello!
  I use MSN 8.1 on a newish HP Pavilion 21.
  YouTube recently began telling me that it can not display until I got disabling the Security Mode.
  It seems to work correctly in the past. Do not know what is happening.
  Thank you
  LP.

  This is a feature of YouTube.
  See this - https://support.google.com/youtube/answer/174084?hl=en

  "Security mode is an opt-in setting that helps to filter potentially inappropriate content that you may prefer not to see or don't want to other people in your family fall on all taking advantage of YouTube." You can think of this as a parameter of parental controls for YouTube. »

• I see not that everything written on the firefox page. But when open secure mod (with SHIFT because there is no written) firefox run normally.

  I see not that everything written on the firefox page. But when open secure mod (with SHIFT because there is no written) firefox run normally.

  If you have tried safe mode and the problem disappeared, this means that one of your modules are the origin of the problem are seen.

• Security mode - unable to show youtube videos

  Hello everyone

  We are having a problem with the inability to view youtube videos.
  The message comes up saying that we can not see the video because the computer is in safe mode.

  I have a K9 filter on the laptop and I'm sure what I'm trying to view is not at all risky so it is a bit of pain and inconvenience. How leave us the security mode please? And what could be the reason why the computer is in safe mode. Thank you.

  Also, if I wanted to take my laptop to be looked at and have a bit of a spring clean where I would take it? We had it for three years now.

  Thank you.

  Hello

  Can you please tell us which laptop model you have and what operating system are you using?
  Are you using the original version of OS that you got with your machine or a clean OS install?

• Security mode of the user to the issue of the domain

  Hi all

  I want to change the security mode of the user in the field.

  Real users added manually are not a domain user.

  And I want to allow access to different users in the field to get in all actions.

  When I change domain mode: I should create local users in the field or what do I put as the local users in the NAS and allow access for users in domain for actions at the same time?

  Thank you for the help

  Hello Val,.

  Welcome to the community!

  If you switch in domain mode, make sure that your users/groups have been created on your domain server. To set the permission on the actions, see this article.

  Please note that all your created manually ReadyNAS local users will be unavailable for use.

  Kind regards

  BrianL
  NETGEAR community team

• What is the exact difference between secure mode and diagnosis

  I am repairing a pc and have done everything I can do in terms of diagnosing the problem. The only thing she shrinks down is to start in safe mode but not in diagnosis or vga mode. It is the same even when you use another defective hard drive. It must be a hardware component on the motherboard. I deleted and all the other components. I disabled designed in bios and Device Manager. What is the difference between secure mode and diagnosis?

  Thanks in advance for any help

  It was the capacitors on the motherboard that needed to change. It works fine now.

• compatibility issues with WRT610N and WMP300N security mode

  Greetings from the experts out there. I have adsl AM300 + WRT610N pulled upward at home my receiving office on WMP300N wireless broadcasting (only 2.4 GHz wireless signal that I have disabled 5.0 GHz for troubleshooting). Get the best connection with the configuration below (WEP without authentication). I tested with WPA, WPA2, WEP with shared authentication. All these 3 combinations security mode does not allow my office to connect to my WRT610N router, which leads me to assume that there might be a problem with a pilot of the aircraft. The only link that almost succeeded was with WPA2 because I managed to get the LAN connected but not being is not able to connect to internet via AM300 so I have concluded that it is another problem too.

  AM300

  Software version: 1.19.04

  ===================================

  WRT610N-SG
  Firmware version: 1.00.00 B17
  ===================================
  Security mode: WEP
  Encryption: 104 / 128-bit (26hex)
  TX key: 1
  Authentication type: Auto

  WMP300N
  Driver version: 4.150.22.0 6/21/2007
  ===================================
  Security type: no authentication (Open)
  Encryption type: WEP
  Key index: 1

  (1) are you able to get a good market condition the Internet connection, using a computer that is connected to the WRT610N?

  (2) are you able to get a good market condition the Internet connection, using a computer which is connected wireless to the WRT610N, when no encryption is used?

  If the answer 1 and 2 is Yes, then:

  First of all, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use.  Delete your current network (this will remove all old settings.)  Restart the computer.  Return to "Preferred networks" and re-enter your current info from the network (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.  Restart the computer.  The computer should automatically connect to your router (this may take up to 2 minutes).  If you're still having problems, temporarily disable your software firewall computer, then try again.

  Note: For WEP, enter 'key WEP 1' (found in the router) in your computer, not the WEP password or passphrase.

  If the above does not solve your problem, download and install the latest driver for your computer's wireless network adapter.

• Presario cq70 116ea, refuses to connect to new wifi router unless the router's security mode.

  Presario cq70 116ea, using Vista refuses to connect again wifi router unless the router's security mode. Error message "Unable to connect" or "timeout".

  Hi, Don:

  Please download and install this driver, and that should solve the problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  Kind regards

  Paul

• Sending e-mail in secure mode

  Hi all

  I tried sending using send notification workflow, then it could not say not able to connect to the gmail smtp server.

  Then I tried http://www.nanogenesis.fr/ to send using the gmail smtp server and found that gmail smtp server accepts connections in safe mode and was able to send e-mail.

  Is it possible to define the EmailMessage object of SMTP in safe mode.

  I found no property that allows you to specify if the SMTP server is secure in EmailMessage mode.

  Is there another way to send emails in orchestrator enabling secure mode?

  Any help will be greatly appreciated.

  Best regards

  Sumit Tyagi

  Sumit - what version of vCO do you use? I ask because the latest version (5.1 update 1) is the only version I've ever seen work with secure connection to mail server. Note that you must first import the SSL certificate presented by the e-mail server (using vCenter Orchestrator Configuration under Network-> SSL Trust Manager).

• SSO on OAM 2 instances with different security mode

  Hi people
  
  Can we did single sign on 2 OAM with two security mode different instances. An open mode and another in Simple mode.
  
  Both are connected to the same LDAP for user data.
  
  Thank you very much!

  I think it's technically "unsupported" but I can tell you that he used to work.

  The technique was to install the server in single mode components and then change the mode back to OPEN via the admin UI on component profile but not to reconfigure the mode on the installed component.

  When you have a server to identity and then telnet-ed at the port, it would open & smpl. The AAA server does not provide the same comments, but a few simple tests will tell you if it works.

  Yet once again, blend modes is explicitly warned against. Depends on your tolerance for this sort of thing.

  Let us know if it works for you.

  Mark

• EAS: Security Mode

  Hi all, I installed EAS 11.1.1
  When you configure the essbase server, I said "Deploy Essbase in standalone mode"
  If I understand it relates to the Essbase server not to the Administration Server.
  When I see in the Regional service console-> management servers-> myadmserver-> properties: tab-> properties of shared services configuration:
  There is a checkbox locked "Shared services security mode" checked.
  
  'Security of shared services mode' is selected because it has been registered with shared services. Am I wrong?
  
  On stage, she was recorded when the configuration? (I saw no option like "save with shared services", I saw this in the Setup confirmation window)
  I can remove it?
  
  Published by: Vovanenok on 13.02.2009 03:03

  Hello

  If you want to use native mode for Regional service, and then open the \Hyperion\products\Essbase\eas\server\OlapAdmin.properties file

  Change the line to :-HUBProvisionEnabled = false

  Restart the Regional service

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Vista Start black normal & all Security Modes, restore fails, screensaver ŒUVRES

  Yesterday (18/06/09) I installed a few new updates, but is not a restart.  Today, the system was sitting idle (, but nobody use it) and we had a power failure.  Restart the system wanted to make a volume control.  During the audit, he found a bunch of bad index entries.  The files went flying by pretty fast, but I could tell that many of them had something to do with Media Center.  Then later in the repair of the volume, she added a bunch of orphaned files.  I couldn't give a sense these files because all the entries were similar to Hex IDs.

  So that brings us to today.  The system starts with black screen with a mouse pointer.  System knows I have 2 monitors connected & I can move the mouse between the two monitors.  With the help of other boots (via F8 in the boot menu) produced similar results, except in safe mode boots, the system does not know the 2nd monitor.  CTRL-ALT-DEL does nothing.  (Do NOT bring up the Task Manager.)  The SHIFT key to display the Sticky Keys dialog box.  After a while, the screen saver turns on.  With screensaver KB/mouse activity outputs and system back to black screen.

  All the security startup black screen Modes.
  Low-resolution video starts with black screen.
  Black screen on startup of the diagnostic Mode.
  Directory Services Restore Mode reports all my disks are clean and black screen on startup.
  Sleep key works.  Wake up, the system returns to black screen.

  OK, here's a little recap... BLACK SCREEN!

  So next I tried the repair your computer...

  Log in to my account admin OK.  Then I tried to Startup Repair which could not detect a problem.  Then I tried the system restore.  System Restore is all my restore points registered in April ' 09.  System Restore Gets an error and fails to load any restore point.  I have two different messages depending on what point of restoration, I try.

  2 most recent restore points are of yesterday and today and the updates, I just installed but never rebooted before the power failure disk check.  When I try these 2 restore points, I get the following:

  The configuration register is corrupted. (0x800703F1)

  If I try the old restore points, I get:

  Cannot open the file transactionally, because its identity is function
  on the outcome of a transaction not resolved.  (0x80071AA7)

  Reading through the error of this last web messages makes me think to there is a bad dependency in the update / restore of the system process.  If pending updates become corrupt, old restore points will fail.  Is this true?
   
  I can boot from a CD-ROM of 3rd party and see my programs and data on the disk.  I did a full inspection, but it seems that all of my stuff is still there.

  So finally I tried to reinstall my Vista system, and my only option is to replace my entire system.  The update option is grayed out.  I used to be able to do a re-install/upgrade to update in the old days (XT & before), but it seems that it's not possible with Vista.  It would be great if I had my old system before SP1, and then I could re - install SP1 & all of my updates.  But it would be impossible for me to recreate my 1 TB from scratch system.  Simply, I have enough DVDS to back up a lot of data.

  Is there a solution to my boot at the digital black problem, or I'm really screwed?  A reasonable solution is much appreciated.

  ==============

  UPDATE...

  I can access shared folders on the blackened on Vista machine.  I created my user account on another computer (Win XP) and am also able to access all my user files.  In addition to the screen saver and the sticky keys work, it seems that file sharing works also.  However, the printer share and office remotely (using Ultra VNC) do not work.

  Hey Ken, I just reread your post previous and tried your procedure.  Are your steps to perform a repair install on Windows site:

  1. Insert the Windows installation disc in your computer's DVD or CD drive. You must start Windows installation while running your existing version of Windows.

  2. on the Install Windows page, click install now .

  3. on the get updates for installation page, we recommend getting the latest updates to help ensure a successful installation and to help protect your computer against security threats. You will need an Internet connection to get the installation updates.

  4. on the Type your product key for activation , we strongly recommend that you type your 25-character product key in order to avoid problems during activation.

  5. on the page Please read the terms of the license , if you accept the license terms, click I accept the terms of the license .

  6. to the which type of installation you want? page, click upgrade to begin the upgrade. You can see a compatibility report.

  7 follow the instructions.

  Note : If your installation disc doesn't include SP1 , and you are updated, then you must uninstall it before proceeding with an update install. Start-> Control Panel-> programs-> see installed updates , then select Service Pack for Microsoft Windows and click on Uninstall.

  Unfortunately, I'm stuck on the first step.  Start a Windows installation when executing my existing version of Windows when my existing version of Windows starts with a black screen, and the only interaction of console, I am able to do what a screen saver and the Sticky Keys dialog box?  What is the trick to start installation?  I can't find.  Is there a way to launch the installation with the keys dialog box to sticky?

  In addition, in the case where I, how to uninstall SP1 from a black screen?  The dialog box of the sticky keys which they as well?

  I know that other messages that other users could not bring up the Task Manager with CTRL-ALT-DELETE.  As I said in my original post, I can't do it.  THE ONLY THING THAT WORKS FOR ME IS THE STICKY KEYS DIALOG BOX.  So I do not buy any version of Vista at all costs will have what I need because Windows Vista just can't do a re - installed on-site if your Windows Vista is not running after a black screen.  Right?

  I'm getting very frustrated and would be very grateful for any help.  I just can't figure how to get the computer do anything when the only thing it starts is a black screen.  And none of my restore points can be restored.  I thought that the system restore has been the goal of the restoration of the system.  Why my Vista system locks my system restore? I don't understand!

  I think that this last update not to not fill properly and locked up my system.  Is it possible for me to undo than a black screen or a Setup disk?

  BTW, Western Digital diagnostics transmitted without error.  Then at the command prompt on my Vista disk, I ran chkdsk and it fixed some files.  I think they were just left by a system restore failed.  So I ran sfc from the command prompt using sfc/scannow damaged = c: \ /offwindir = c:\windows.  He ran for a while and there was no violation of integrity.  If the drive seems fine.  Are there tools that can help me find the problem?  Is that what I can do to restore the registry to an earlier time manually?

• Download files in Download secure mode and I can't open them

  All of a sudden the files I download download in "secure download" and then I can't open them, get error message does not support this file type. How to get to download the way they used to?

  What is the secure download mode?
  What browser do you use?
  Is this perhaps something your anti virus added?
  Which is an add-on for IE (Control Panel, Internet Options, programs, manage add-ons)?
  What is the file extension for the files you're trying to open?

• disable secure mode

  How can I change my setting of safe mode

  Hi Anthony,

  1. what version of Windows is installed on your computer?

  2 - is the computer every time starts in SafeMode itself?

  Please follow the steps:

  a. click Start and type msconfig in the Start Search bar and press enter . Now windows System Configuration utility will be open.

  b. Start in the folder, if the Startup is checked, uncheck the box

  c. click apply and OK.

  Restart the computer and check with the question.

  I hope this helps.

• Forgotten password for windows XP, I am the Administrator security mode/cd and connection administrator does not

  Hello, I hope you will be able to help me.

  I have an old backup computer with all my stuff backup well on it and I went on it today and I couldn't remember the password. It's a Packard Bell computer and I have windows Xp home edition. I am the administrator and the only user of this computer. My login is not your typical connection, it isn't fancy with photos etc. is the old login box with only the user name and the password. I tried safe mode and I can't get into safe mode, but when I select windows safe mode starts up normally and the connection will appear. No matter what I have I can't get in. I don't have a CD to reset restart and helps administrator as the username without password does not work because it pops up saying "unable to connect due to account restrictions. Please help me.

  Hi Melanie,

  Please see this thread that provides a solution of MVP Malkeleah

  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the sticky below.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.