Security Monitor NSDB link throws the bad sigsubid

Similar Questions

• Where the 10.11.6 2016-001 security update - download links?

  Where is the 10.11.6 ('El Capitan') 2016-001 security update - download links?

  On the App Store.

  Open the App Store, and then select the updates at the top of the menu in the window of the App Store.

  Update the software on your Mac - Apple Support

• How do you reset security issues where there is a link at the bottom of the page?

  When I was younger, I did my security questions and do not remember them. I tried to reset, but it isn't a link at the bottom of the page click on reset. Any help is welcome!

  Hi Kayla_8

  This link appears only if you have a rescue address put in place on the e-mail account.

  If you don't have an e-mail address (different from the secondary e-mail address) help set up on the account, you will need to contact iTunes Support Online: http://apple.com/emea/support/itunes/contact.html (select security account as your help topic) or by phone: Numbers of Support from Apple

• What is the link to the recent security patch that includes XP?

  I am a senior with XP, trying to find the real link with the recent security patch that includes XP.  Can someone send me the correct link? Thank you

  Thank you very much.  I was able to do according to your instructions. It's so complicated for a non-techie; no doubt that I would have never found without your help.

  I'm glad that worked for you!  I don't know if after you have installed this update if you need to restart or not. If she did not go to you, I do it anyway.

  Whenever I have uninstall or install anything, I always restart. Just a habit that I took some time ago.

  Have a nice weekend!!

  Thanks for your answer, too!

• BlackBerry software after security wipe, BlackBerry link does not identify my backup file as valid for the device

  I had trouble with my Z10, then I backed up with BlackBerry link (which seemed to work creating a file close to 1 gigabyte) then I did a cleanup of security: when I rebooted, I went through the installer until the end, then the element 'Restore' has been enabled from the context menu of the device.

  When I click on 'Restore' after few seconds the bed message "no backup is available for this device.

  Is there a function "no, really, RESTORE THIS FILE ' emergency can I call it? I don't want to have to redownload all my apps and reconfigure the whole device.

  Thanks a lot for the quick reply... I did some additional checking and I confess that sometimes Windows file permissions are strange and mysterious to me... for some reason, Windows Home Server share where I write my backups to was ' write only ' BlackBerry-link point-of-view... when I searched and had difficulties, just pick it up and copy the file, I added my user login to the official list of the users 'Total control' on this file. , and then BlackBerry link found the file very well... now is restoration.

  Sorry for the false alarm, but maybe this will help someone else in the future :-)

• link to the sound and the video in the source monitor

  Hello

  I use CS3. I have a clip mpeg video and a file audio wav on the timeline. The video / audio is not multiplexed. They are connected on the timeline. What I have is the video and audio link and go in the source with the hardware monitor...   I can change the subitems etc. of the source monitor and put in a new video layer on the timeline.

  When I put the video and the sound file in the source Panel, edit the video and slide on the timeline that this video goes to the timeline.

  Is there a way to link in the source, so the video monitor and sound can be edited to timeiline?

  Thank you

  Stem

  Rod,

  I'm not aware of a direct way, one click to do this, but you could put your Audio & video on the rails of the good in a sequence, sync them, and then export a multiplex. Import into a new sequence, and everything will be content, as you wish.

  Maybe someone will point out this method in one click. You have CS3, right?

  Good luck

  Hunt

• When I hover over a link, Firefox adds the site before my link makes it bad.

  I was check the compatibility of my site. So I opened http://www.sethermal.com. It was fine until I flew over a link. Firefox has added the site and broke the link.

  For example.
  I entered the address bar www.sethermal.com . The site came fine.
  I hover over the 'Site Map' link on my page. Link is http://www.sethermal.com/pages/site-map.html
  Before clicking on the link, I looked down and Firefox shows www.sethermal.com/-www.sethermal.com\pages\site-map.html
  When I click on the link of course I 404 page not found

  Why is this happening?

  These links have a backslash instead of a slash.
  Firefox is not so forgiving as other browsers and treats a backslash as a character valid and thus prefixes links with the URL of the page.

  [1] <a href="http:\\www.sethermal.com\index.html">
  [2] <a href="http:\\www.sethermal.com\pages\service.html">
  [3] <a href="http:\\www.sethermal.com\pages\about-us.html">
  [4] <a href="http:\\www.sethermal.com\pages\contact-us.html">
  [5] <a href="http:\\www.sethermal.com\pages\site-map.html">
  [6] <a href="http:\\www.sethermal.com\pages\products\Application\application.html">
  [7] <a href="http:\\www.sethermal.com\pages\products\IndustrialHeaters\industrial-heaters.html">
  [8] <a href="http:\\www.sethermal.com\pages\products\ComponentHeaters\component-heaters.html">
  [9] <a href="http:\\www.sethermal.com\pages\products\ProcessControls\process-controls.html">
  [10] <a href="http:\\www.sethermal.com\pages\products\PackagedProducts\packaged-products.html">
  [11] <a href="http:\\www.sethermal.com\pages\products\HeatExchangers\heat-exchangers.html">
  [12] <a href="http:\\www.sethermal.com\pages\products\ColdWeatherProducts\cold-weather-products.html">
  [13] <a href="http:\\www.sethermal.com\pages\products\Sensors\sensors.html">
  [14] <a href="http:\\www.sethermal.com\pages\resources\engineering-data.html">
  [15] <a href="http:\\www.sethermal.com\pages\resources\industry-application.html">
  [16] <a href="http:\\www.sethermal.com\pages\stsnews\sts-news.html">
  [17] <a href="http:\\www.sethermal.com\pages\stsnews\hot-products.html">

• App people linking the bad Skype account?

  I put this question to the Skype support team, but they suggested that I come to Microsoft on this issue, I would be interested to know if anyone here can help.

  Now, I know, Skype will create an automatic for you account name when you sign in with a Microsoft account. I got my Skype account, I then linked with my Microsoft account, so the two are now linked. He says in the Skype for the desktop application and the application Skype for Windows 8 - but the app people for Windows 8 displays the name of automatic account, because I have given.

  I tried closing and restarting the app and I tried even restart my computer laptop, but for some reason some it does not display my account name Skype "good." only automatic account name. Should I be concerned about it? Accounts are always properly linked on the application of people? Would appreciate any advice with this, if I need to do anything.

  Here's how I think that I fixed it.  Firstly, restoring links manually to Outlook.com has not really helped because that had no link to my external Exchange account associations.  The restoring my phone links did not help because when the phone and computers are on, those who have been re-synchronization on the server corruption.  So I uninstalled apps from people/Mail/calendar/e-mail of all PC Windows 8 that was connected to my Microsoft ID, stop those is not necessary and closed on the second Windows Phone leaving only my 810 Lumia Nokia to be connected to the cloud Microsoft under my MS ID service

  THEN I crossed every contact on the phone and manually fixed links to separate all the people that have been incorrectly linked (sometimes up to 50 by contact), then manually by linking those that were actually the same person.  That took a while, but it seems to stick.  I know that the phone isn't what makes the corrupt linked contact database since it is then locked, no one can access the link information.

  Then once my contacts have all good on the phone, I booted up my tablet of Windows 8 and installed the Windows store people, Mail, calendar, messaging app.  After the opening of these applications, they have downloaded all the new information my accounts registered previously and properly linked contacts.

  Then I reinstalled the soft people, Mail, calendar, messaging on my 8 Windows Media Center (which is what I did a restore of the system on the other night).  He did NOT download the right contact linking information and started to give me the links randomly wrong once again!  So I quickly uninstalled these apps to stop synchronization.  Then I looked on my 810 Lumia again and fixed the small number of links contact who broke the glass 8 MCE.

  Back on the Windows MCE 8, I ran disk cleanup to remove all temporary files and restarted for good measure.  After that I tried to reinstall once again, people, Mail, calendar, messaging app that finally downloaded the right information links for my contacts!

• bad link on the page (Flash Player) deployment

  Hi all

  I think that there is an incorrect link on Flash Player distribution / deployment page (Weiterverteilung von Adobe Flash Player|) Adobe):

  When I click on the link FP 15 ActiveX, download the correct version of 15.0.0.239

  the link to the Plugin FP 15 leads to the 15.0.0.223 version instead

  

  Hello

  I'm unable to reproduce. Through our network of Hamburg, I was able to download the new version of the Installer MSI Plugin from the localized distribution page.  Please try to clear the browser cache.  If the server that you use to deploy the Flash Player, please try to empty the cache memory on the server.

  --

  Maria

• After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for L775D.

  Original title: Graphics Adapter Gone.

  After the upgrade of the House 7 to 7 Pro the Toshiba support site shows the bad graphics card for my L775D. I have an AMD Radeon 6250 built in card and when you search AMD support site, it does not show my video card. I did a search automatically and empty came also.

  I also had a problem with a file. TVALZ_O Sys when I search because she is on board I came with 3 files which no I can do something with. The system will accept all available Windows updates and continues do not install 3 updates of security. This a Quad Core A6 Vision 1.4 GB processor any help would be greatly appreciated as I formatted and reinstalled until I'm blue in the face.

  Hello Stephen,

  The file that TVALZ_O seems to be linked to Toshiba ACPI and it seems THAT BIOS should be updated.

  Since you are facing many problems after the upgrade to Windows 7 Professional, it seems you may need to check the latest updates of the Toshiba BIOS.

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You have to get in contact with the support Toshiba BIOS update and to get help.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• System DSN throw the code system error 126

  Hello
  
  When I tried to Configure DSN set up the system throwing the error below
  
  Oracleinstantclient10_2 ODBC driver installation routines pourraient not loaded because the system 126 error code. followed by
  Unable to load a whole library or a translator.
  
  Operating system: xP
  
  Oracle Database: 10 g
  
  The content: (C:\Oracle\instantclient10_2) dir
  --------------------------------------------------------------
  BASIC_README
  classes12.jar
  OCI.dll
  ocijdbc10.dll
  Ociw32.dll
  ODBC_IC_Readme_Win.html
  odbc_install.exe
  odbc_uninstall.exe
  ODBCRelnotesUS.htm
  ojdbc14.jar is
  orannzsbb10.dll
  oraocci10.dll
  oraociei10.dll
  sqora32.dll
  SQORA.chm
  sqoras32.dll
  sqresus.dll
  
  
  TNS file content:
  
  YourTNSName = sery
  
  (DESCRIPTION =
  
  (ADDRESS_LIST =
  
  (ADDRESS = (PROTOCOL = TCP)(HOST =localhost) (PORT = Default1521 >))
  
  )
  
  (CONNECT_DATA =
  
  (SID = Seya)
  
  (SERVER = DEDICATED)
  
  )
  
  Please advise me on this.

  user12994238 wrote:
  Hi schavali,

  Thanks a lot, now I got a different error

  While I created the DNS set up the system throws the message below

  Unable to connect
  SQLState = 08004

  DNS Set Up for system instantclient(win32-10.2.0.4) throw as ORA-12154; AMT: could not resolve identified the specified connection.

  operationg system: xp

  path dir: C:\Oracle\instantclient10_2

  Thank you
  Sery

  ORA-12154: TNS: could not resolve the connect identifier specified

  This error means one thing and one thing only. The customer couldn't find the entry specified in the tnsnames.ora file being used.

  Following this statement, remember that when you use a dblink, the database that defines the link acts as a client to the database that is the target of the link. So in this case, the tnsnames.ora on the host of your source file must have an entry for your db target, as defined in the db_link.

  And for the umpteenth time... This error has nothing to do with the status of a listener. The connection request never got far enough to reach a listener. If someone tells you to check a listener, they do not pay attention, or do not understand how works the TNS. This error is equivalent to not be able to place a phone call because you do not know the number of the part you want to reach. You would not debug this situation by going to the home of the other guy and test his phone, or by accessing the phone company and the standard test. And you are debugging an ORA-12154 by checking the listener. If I had a list of ten albums of 'Incredibly Simple Concepts (tm)' which must be burned in the brain of anyone claiming to be an Oracle DBA, it would include "ORA-12154 has nothing to do with the listener.
  =====
  Suppose you have the following in your tnsnames.ora:

  larry =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SERVICE_NAME = curley)
      )
    )
  

  Now, when you issue a connect, say like this:

  $> sqlplus scott/tiger@larry
  

  TNS will appear in your tnsnames.ora for an entry called "larry". Then, tns sends a request to (PORT = 1521) on (HOST = myhost) to aid (PROTOCOL = TCP), requesting a connection to (SERVICE_NAME = curley).

  Where's (HOST = myhost) on the network? When the request is passed to tns to the next layer in the network stack, the name "myhost" resolves to an IP address, either via a file 'hosts' local, through DNS, or possibly other mechanisms being used less. Alternatively, you can hard-code the IP (HOST = 123.456.789.101) in the tnsnames.ora.

  Then, the request arrives at port 1521 myhost. If all goes well, there is a listener on myhost configured to listen on port 1521, and this listener knows SERVICE_NAME = curley. If so, you'll be connected.

  A few important points.

  First, the listener is a process only server-side . It's all in life seeks applications for reception for connections to the databases and set up these connections. Once the connection is established, the listener is out of the picture. It creates the connection. Is not maintain the connection. A listener, linking an oracle of the House, listening on a single port, use multiple instances of database in several versions of several houses. It is unnecessary complexity to try to have several headphones. It's like the telephone company, to build a separate table for each customer.

  Secondly, the tnsnames.ora file is a problem on the client side . Its purpose is to resolution addressess - the equivalent of the 'hosts' file tns further to the bottom of the network stack. The only reason it exists on a host computer is because this machine also can run client processes.

  What can go wrong?

  First, there may not be an entry for 'larry' in your tnsnames file. In this case, you get "ORA-12154: TNS: could not resolve the connect identifier specified" no need to go looking for a problem on the host, with the listener, etc.. If you cannot place a phone call because you do not know the number (cannot find your phonebook (tnsnames.ora) or can not find the party looking for listed in it (no entry for larry)) you don't look at problems at the switchboard.

  Perhaps the entry for larry was found, but myhost could not be resolved to an IP address (for example there is no entry for myhost in the local hosts file). This will mean by "ORA-12545: Connect failed because target host or object does not exist.

  Maybe there is an entry for MyServer in the local hosts file, but it specified a bad IP address. This will mean by "ORA-12545: Connect failed because target host or object does not exist.

  Maybe the INVESTIGATION period was good, but there is no listener running: "ORA-12541: TNS:no listener.

  Maybe the INVESTIGATION period was good, there is a listener to myhost, but he is listening on a different port. "ORA-12560: TNS:protocol adapter error.

  Maybe the INVESTIGATION period was good, there is a listener to myhost, listening on the specified port, it's unknown SERVICE_NAME = curley. "ORA-12514: TNS:listener is not currently of service requested in connect descriptor.

• The underlined words on my blog that links to the ads. disobeys in Explorer. It is not a problem with my blog master - only on Firefox.

  When I opened my blog articles using Firefox, words are underlined and linked to the ads. When I use Explorer, the words are not underlined and no ads appear. Already checked with my blog master because I paid the extra to have no advertising. Apparently it is from your program. What can we do to get rid of this or what I need to change to another browser? Thank you!!! My blog is www.pattiannthompson.wordpress. com

  Hello

  This does not happen for me. It could be the work of a bad extension, try to run in safe mode and see if it still load up ads on your blog.

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• When I click on a link in the history of yesterday it then disappears from the story yesterday. Now it shows the story today but has been missing since yesterday.

  A link in the history disappears when it is open. Firefox 12.0

  In addition, please immediately update Firefox 17.0.1, as 12A known security flaws. Update Firefox to the latest version

• Cannot open the link to the catalogue EPUBreader (chrome: / / URL)

  I have FF 16.0.2 and expansion EPUBreader installed and it works fine. When I click on a local .epub file, it opens in the browser.
  Also have a local webserver (http://localhost) and a homepage with all my links the and external.
  I would like to add a link to the Epub catalog like this:
  < a href = "chrome://epubreader/content/catalog.xul" target = _blank > < /a > BOOKS
  The problem is that FF does not show anything, when the link is clicked. How should I do?

  That an extension can open a URL chrome via this link on a web page.
  
  You can see in the ' tools > error Console "a security error.
  
  You can use a bookmark to the location defined in the URL chrome instead, if you want to open the catalog.xul page.

• URL links does not work in the lower left corner. Becomes blinking (between the address of link url and displayeble). Try for example push a few PHP my admin link (if the arrays are enough to bind apper in the corner at the bottom left). Fix this bug plea

  Hello world! I want to report a serious bug and very annoing.
  Go to www.kdevelop.org for example (or any other site), which has a link in the lower left corner. You will not be able to click on it! Cause firefox starts to Flash. Hard to explain what it looks like, it until I did a picture on here screenshot of a bug .
  Some examples of video too. Take a look at what comes when I want to click on the link above. video example of bug
  So try to any site you want, which has links (< a href > < /a >) if the bottom left corner. It's annoing. Is it possible to fix this? Actually this bug appeared because of the deletion status bar in firefox 4, where usually URL was exposed on the mouse on. Hope you understand my problem, sorry for my bad English. More info: System: 64-bit Linux (OpenSuSE 11.3). Firefox 4 b 12

  It looks like a problem with the theme. I see 'tooltip' in the right-hand corner in this case and not at the same position as this button.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.