Security Windows update KB2660465 has failed. How can I solve this problem

Similar Questions

• not configured Windows Update backupdates rolling properly, how can I solve this

  After that I installed all updatres to my computer running windows vista 32 bit, I restart and all goes well until stage 3. at the end I get the following message, updates are not configured correctly, and windows is back to its previous state. I tried the insatll only 1 update and get the same message when I try and install the wholw package. Please help as I am at a loss.

  Hi CodySherman,

  1. did you of recent changes on the computer?

  2. When was the last time you were able to install the updates successfully on the computer?

  3. do you have security software installed on the computer?

  Method 1

  I suggest that reset you the default Windows Update components and later try to install updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check out them.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, view the update history for more details on the failure of the update and after return with details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  I hope this helps!

  Halima S - Microsoft technical support.

• Diagnostic test on my HP laptop G72 64 bit Windows 7 is not. How can I solve this problem?

  Hello

  I can't connect to wireless internet; However, I can via rigid cable.  I was told to run a diagnostic and I received the following message: model memory 2 DIMM has failed.  We advised me to go to hp.com support and download the wireless driver and that should fix.  I have done that and restarted my computer and I can not pick up a wireless connection, but I can always get on the internet using ethernet.  If my memory does not, he wanted me to use wireless internet?  Also, I am able to use my computer completely under the wireless internet as well how, if my memory may be bad?  Please advise me on what to do to correct this.  My last resort is to use the F11 key for a system restore.  I thank very you much for your time.

  Hi MaumelleGirl,

  Thank you very much for the product number. Here is your Service and Maintenance Guide for your model. On page 4-11 you will find compatible part numbers and instructions on how to replace the RAM.  You can order the RAM in HP Partsurfer using the part number or the order of a third-party online site.

• I get an error loading C: Windows\ifapilidarexowex.dll rundll. How can I solve this problem?

  I have a laptop Gateway running Windows XP Pro. When you connect to any account, I get an error loading C: Windows \ifapilidarexowex.dll rundll. I click on the OK button and the system starts and seems to work fine. It is an annoyance and should be fixed. I don't know how.

  C: Windows\ifapilidarexowex.dll<-- this="" is="" a="" malware="">

  As already mentioned by the first poster, the loading of the module above error is because the point of loading in the registry is still intact and trying to load a file that no longer exist. (A malware dll) file has been deleted either by your resident anti-virus or other scanners, but left intact registry value where the error.

  What needs to be done, is either operate scanners who clean up redundant reg for example, MalwareBytes entries or other scanners or run other tools such as HijacThis and tick the corresponding section of fault start and click on the "Fix checked" button. hijackThis will then remove the redundant value and error loading stops. It is easier to use a tool, so you don't have to worry about editing the registry.
  You could also disable the offending boot entry via msconfig > startup if it shows up there.

  Below is an example of an error in loading a module of malware that has been deleted by the antivirus, but has not removed the corresponding registry value.
  04 entry in the log from hijackthis should look like the example below.

  "Error loading c:\windows\system32\ravkgmff.dll the specified module is not found."

  O4 - HKLM\... \Run: [GPLv3] rundll32.exe "C:\WINDOWS\system32\ravkgmff.dll",realset"

  http://free.antivirus.com/HijackThis/

• "This version of windows is not genuine" now, how can I solve this problem?

  I've had my computer for about a year now, I have purchased from an online retailer and had no problems with it until tonight. He says now this version of windows is not genuine and I have no idea what to do.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - G24VV - 33FHQ-7T47M
  The Windows Product Key hash: UGZM1rvCYzqW8 + vkqRaVuYkMLr8 =
  Windows product ID: 00359-OEM-8704306-86632
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {CF021E53-765D-457B-82BA-05D1FA3D4FE4} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150316 - 1654
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {CF021E53-765D-457B-82BA-05D1FA3D4FE4}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7T47M00359-OEM-8704306-866323S-1-5-21-1963349060-703716915-3741463835Gigabyte Technology Co., Ltd.. H81M-H American Megatrends Inc.. F5 20140120000000.000000 + 00069BC0100010000F408090409GMT Standard Time(GMT+00:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  C:\Windows\system32\slmgr.vbs(1333, 5) (null): the service has not been started.

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 5:8:2015 22:05
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  N/a, hr = 0x8007000d

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  ALASKA APIC HAS M I
  FACP ALASKA A M I
  HPET ALASKA A M I
  ALASKA MCFG A M I
  FPDT ALASKA A M I
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  SSDT PmRef Cpu0Ist
  LAURENCE INTEL HSW

  There is always a minor error in the report - please try validation using Internet Explorer, at www.microsoft.com/genuine/validate

  It should pass--and clear the error.

• Cloud creative app empty in windows 10... How can I solve this problem?

  Adobe creative cloud app window is empty. I tried uninstalling and reinstalling, but it did not work. I am also unable to log my Muse app, but can connect to my Adobe Creative Cloud account. Help!

  Hi try this: Creative Cloud Manager is empty

• When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  When I accessed at "MS Check for updates ', error found: Code 8000FFFF, Windows Update has encountered an error that is known. How can I solve this problem?

  http://support.Microsoft.com/kb/946414

  «"Error when you download updates using Windows Update or Microsoft Update: 8000FFFF"»

  Follow the information given in the above link to solve your problem.

  See you soon. Mick Murphy - Microsoft partner

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?

  Hello grandpa_bill,

  Thank you for your participation in the communities of Support from Apple.

  If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.

  For more information, see get help using iCloud for Windows.

  All the best.

• Im trying to find my windows oc disk and I keep getting an error shell excute ex failed; Code 87 the parameter is incorrect how can I solve this problem

  Im trying to get my disk of oc windows, and I get an error shell excute ex failed; Code 87 the parameter is incorrect. Please help me

  How can I solve this problem. Thank you.

  Hello

  You did it changes on the computer before the problem started?

  I suggest you perform a startup repair.

  See these articles for help:
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

• My windows Messenger has stopped working. How can I solve this problem?

  My windows Messenger has stopped working.  How can I solve this problem?

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  kindly repost your question in the Forum of Messenger above, or the Group of discussion below;

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.live.Messenger

  Discussions in Windows Live Messenger

  They will help you with your WLM questions when repost you your questions in the highest Windows Live Messenger Newsgroup.

  See you soon.

  Mick Murphy - Microsoft partner

• CREATING DVDS IN WINDOWS VISTA HAS BURNED & FROZEN ON 91.2%... WHY DOES DO THIS AND HOW CAN I SOLVE THIS PROBLEM?

  I tried to make a dvd of family movie transferred to the computer of a vhs tape.  He stopped burning at 91.2% with no error message, just the green line, trying to fill 100%.  What happened and how can I solve this problem?  I'm so frustrated.

  You should try to use windows live movie maker.

  Click the Start button, click all programs, scroll to the bottom of the list of programs and click Windows live, and then click windows live movie maker that lists.

  http://www.windowslivehelp.com/solution.aspx?SolutionID=d53771d0-6183-4b06-96ea-fe3c356e24e0

• After that update it tells me that the updates did not and he comes back, how can I solve this problem?

  I do automatic closing his day, the computer has not been connected in recent years. 46 updates downloaded, when I turn it on it tries to configuire updated and fails. He then returned back. How can I solve this problem?

  Hello

  What is the accurate and complete error message?

  Method 1:
  You can see the knowledge base article and check if it helps:
  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 2:
  You can stop the automatic update and install an update at a time and restart the computer to verify the update is causing the problem.
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-automatic-updating-on-or-off

  You may need to temporarily disable the antivirus software updating.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

• I'm not able to install automatic updates. How can I solve this problem?

  I get an error message when I try to install the automatic updates.  It says "some updates could not be installed in the header of the message.  In the retail box, it says "the following updates were not installed".  Just below this is the list of updates that might not be installed.
  Update to filter junk mail in Microsoft Office 2003 (KB974771)
  Update of security for Microsoft Office 2003 (KB972580)
  Update of security for Microsoft Office 2003 (KB974554)
  Update for Microsoft Office 2003 (KB973705)
  How can I solve this problem?  Thank you.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• iTunes continues to crash on my iMac using OS 10.11.4 forcing me from quitting smoking. Someone else has this problem and how can I solve this problem?

  iTunes continues to crash on my iMac using OS 10.11.4 forcing me from quitting smoking. Someone else has this problem and how can I solve this problem? I use the latest version of iTunes. There seems to be a problem since I updated the system software.

  iTunes: solving problems with third party plug-ins iTunes - https://support.apple.com/HT203395 - press Option and command (on Mac OS X)

  Hold down the option/alt key and create a new test library. If iTunes start your old library file is corrupted and will need to be replaced from a backup or rebuilt from scratch.

  LINC Davis February 2016 - https://discussions.apple.com/message/29767369#29767369

  Reinstall iTunes:

  -Post of Niel April 2015: re - install iTunes app - https://discussions.apple.com/message/28055467#28055467 - delete the old application first, with instructions on how to do it.

  -April 2015 LincDavis post with some more details on the method outlines Niel - https://discussions.apple.com/message/28101611#28101611