See also the references does not not in the index

Similar Questions

• I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  I bought Adobe Lightroom 6 only to see my DVD drive does not work with Windows 10.  Is it possible to download Lightroom?  I have the DVD with the serial number.

  Download and install the trial version of Lightdroom CC.

  Then enter your serial number, follow these steps

  How to convert a trial CC 6 Lightroom Lightroom

• The file reference does not call. upload()

  OK it's going to take a little bit to explain but stick with me:
  
  I have two layers in the timeline, with no keyframes (coucheUn) and the other with a picture any key for every frame in the layer (layerB).
  In coucheUn, I have the script action to declare a variable of FileReference and I also declare and attach a listener object to the file reference.
  The listener object detects the event .onSelect to the FileRefernce (this event is generated when the service. the FileReference class's browse() is called - which opens a file browser and allows you to select a file). When called onSelect listener object executes the function. upload() FileReference which analyzes the file selected to a php script that downloads the file on my server.
  Function. for the FileReference browse() is called from an image in layerB. This is where the weird stuff that happens.
  When I test the movie the first time I enter the keyframe that calls the function. browse() all download routine work and the file is downloaded successfully. If I continue to the next keyframe (using navigation controls) and then navigate back and try to repeat the download process, then the file browser opens successfully, I select the file and then nothing happens. I have problems to identify the problem, for as far as I see it is as if it does never emit the onSelect event once the file is selected, which shouldn't be the case that the function .Browse works and a file is selected successfully. This would imply the php script does not work which is just ridiculous because it is a very simple script and it works the first time.
  Everyone has ideas, if you need more just information!
  
  
  UPDATE:
  
  Just did some tests and I'm completely confused, it's something the onSelect event. For some reason, it is not called / is not detected by the listener object. It's just weird because he calls good the first time you enter the frame, but if you navigate back, it is not detected. I checked the listener object was still in the scope of this framework and it seems to be, so I'm completely confused. The listener object is there and listening, the event that generated the onSelect event is executed but then never detected.

  Wooops, corrected just, said an another FileReference var on the following image with the same name, changed the name and works very well. Really really stupid of me.

• I have a logitech zoom webcam and also skyoe, Skype does not recognize the web cam and I get an error box, why?

  My webcam logitech research... I see myself but when my family made a video call to me I can't see them and they can't see me, but I can speak for them. We have all webcams and their work with another family member, but mine does not. Why Skype does not detect my webcam?

  POgrady,

  Hello and thanks for your message.  You mention that your webcam works, but the problem is with Skype.  Most likely, you will need get the appropriate Skype settings.  I've linked the support page for Skype so that you can ask them on the required parameters, etc.
  https://support.Skype.com/
  Please let us know if this information did or didn't help you get your problem is resolved.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• No Gecko browsers load Internet sites not based on Windows 7, but they do it on Windows XP. Also Firefox process does not close and the browser can not shut down or restart.

  I tried to install firefox 32 and no site would charge and also the process did not close. I tried to disable ipv6 turning my router settings, so there is that the ipv4 connection and also disabled dns prefetching and define the network to no proxy settings. I uninstalled firefox and tried to reintsall after completely removing everything leaving no trace in appdate local and roaming records and using ccleaner and IObit Uninstaller. Then Firefox would work for a little bit and load Google Facebook and Youtube, when I tried it, but it was very slow, reclassification to the installation of Firefox on my Windows XP that has been improved from 30 to 32. Yet once uninstalled and I tried older versions of Firefox, K Meleon Lunascape and same herd. Flock has worked, but he will soon be unsupported. Finally, when Firefox loaded the CPU usage went from 8% to more than 30% of the Web pages and then loading sites after loading icon appeared. I have other browsers work fine. Right now I use Opera.

  I managed to fix it myself. I did a scan to scan with malwarebytes antimalware pro I had and adwcleaner threat and quarantined everything that the first softare found and cleaned with the second, everything appeared to be remnants of old unisntalled programs. I then had to remove the remains of appdata kmeleon and firefox profiles. I only left the firefox of the records that are the browser files I wanted to keep it light. I then checked for settings. I had windows desfault settings check if I have doen not matter what settings with avg pc tuneup 2011, Tweak Me! UWT 2.2 and used TCP Optimizer to bring the network settings by default by windows to 9000 kbps of download speed (after that I did a network speed test). Now firefox is super fast and xcloses normally.

• (RH9) 'See also' - how to make * not * clicks when only one entry in the list?

  I have several topics (A, B and C) in which I want to place a control 'See also' that has two subjects (B and C) inside.

  In the A section, click on the control see also appears a list of "A" and "B". Click each item in the list to access the topic.

  In the B section, click on the control see also jumps directly to heading C.

  In the C section, click on the control see also go directly to section B.

  Is there a way to force the control to * always * bring up a list of subjects "see also"? For example, in section B, I would like to control to display a list containing just heading C.

  Hoping that...

  Thank you.

  Hello

  Administer a test.

  Click your related topics in WYSIWYG button and switch to HTML view.

  You should see a quantity of larg of the code presented in green, followed by a small amount of what looks like the code repeated in dark red.

  Copy the following line (including the < and="" the=""> and add the following line to each area.)

  Give it a go and see how you rate.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7, 8 or 9 in the day! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Windows 7 Search does not work - only index several elements then stops

  Hi, my first post here.

  I am running windows 7 64 bit on my new PC with all the latest updates installed. I have problems with the windows search tool. The tool detects files but not others and indexing is incomplete. I've been to the dialogue "indexing options" and have rebuilt the index several times and I even changed the location but it indexes only several hundred articles (normally 250-350) then stops and it is. I have thousands of photos and music files and the search tool is not find an any of them, but interesting, that it seems to not find what seems like all my program files and folders, what any of the other locations, even though I checked all the places I want to be pegged as photos, music, videos, etc in the "indexing options" dialog box.

  My computer is a Dell and I had a problem with it a copuple weeks back and the operating system must be reinstalled and I wonder if this could have something to do with it. Other than this problem, everything is fine and I am very happy. I have the latest version of McAfee antivurus and did a complete analysis of the system and have no problem there either...

  I really like to get the search engine works again, at this point when I do a ctrl + F for find, he can't find anything or even appear to be working away or by train. If anyone can help me it would be much appreciated.

  Please let me know if you have any ideas that I really want to get this function to work.

  Kind regards

  Kelvin

  I found the answer. It's a problem of incompatibility with McAfee Security Suite 2010, factory installed by Dell.

  I've tried EVERYTHING! Nothing has worked, search forums etc and after all that I uninstalled McAfee now indexing and seraching is fantastic work.

  Thanks for your help, much appreciated.

• Search by "tags" does not work for indexed location

  I have pictures marked as "cars."

  When I search with the following syntax: tags: cars
  they appear in the search. So far so good

  But if I have the folder index these photos are found, after index, they do not appear if I do the same search: tags: cars
  seems that the search function uses 'tags' research if the location is indexed.

  What can we do about it?

  OK, I got it works as it should go in the pictures folder itself, not through libraries, right click on the image, select Properties, Advanced button on the general tab, check allow content to be indexed and rebuild the index.

• Method reference does not work with the Decorator pattern

  Hi all!

  I faced a problem, when I use the reference of the method in function in Collectors.groupingBy I get an error: "no suitable method found to collect. But! If I replaced the method with a lambda expression reference, everything works fine.

  Here is the code example:

  interface Iface{
      public int getPropertyOfClassA();
      public void setPropertyOfClassA(int propertyOfClassA);
  }
  
  class A implements Iface{
      private int propertyOfClassA;
  
      @Override
      public int getPropertyOfClassA() {
          return propertyOfClassA;
      }
  
      @Override
      public void setPropertyOfClassA(int propertyOfClassA) {
          this.propertyOfClassA = propertyOfClassA;
      }
  }
  
  class B{
      private A objectA;
  
      public int getPropertyOfClassA() {return objectA.getPropertyOfClassA();}
  }
  
  class C extends B {
      int propertyOfClassC;
  
      public int getPropertyOfClassC() {
          return propertyOfClassC;
      }
  
      public void setPropertyOfClassC(int propertyOfClassC) {
          this.propertyOfClassC = propertyOfClassC;
      }
  }
  
  public class example {
      public static void main(String[] ars){
          List<B> listOfB = new ArrayList<>();
  
          Map<Integer, List<B>> groupedByPropertyOfClassA = listOfB
                  .stream()
                  .collect(Collectors.groupingBy(C::getPropertyOfClassA));
      }
  
  }
  

  
  

  Change 'C::getPropertyOfClassA' with "objC-> objC.getPropertyOfClassA ()" and it works!

  Any ideas?
  

  You have astream. Not all B is a C, so you cannot apply a method of C to each item (even if this method is defined in B).

  This also works if change you it to

  collect(Collectors.groupingBy(B::getPropertyOfClassA));
  

• Close the vi reference does not not on reentrant vi

  I have a reentry vi which will not close its reference. My program work experience, and once the experiment is complete, I use the FP. Open the property node (w / a fake wired to her) and a reference to close to automatically close the VI and reference. If I go into Windows Explorer to reopen the VI for editing, I get a popup 'a VI in memory with the same name cannot be replaced because it is in use. Click OK to open the VI in the memory. »

  Now, if stop my program courses through the experience by pushing the button exit (which runs the same FP. Open and close reference) and try to reopen the VI through the Explorer, there is no popup and the VI opens without a hitch. I can't figure out why there is this difference in behavior, or why I can't close reference VI.

  Is reentrancy issue?

  Thank you

  
  

• Wi - fi switches mode plane ok but seeing on F12 key does not red IE remains white

  What happens after loading Win8.1 yesterday on a HP Pavilion g6-2235tx Notebook

  If I should be in another topic on the forum I'll re - ask here.

  Thanks for any help here...

  My laptop - HP Pavilion Notebook PC g6-2235tx - is not included in the list provided by Dunidar.

  In my Windows Update (in option), I had two graphics drivers to update, but glancing through several forums, it seems that there may be problems with the discharge of the battery overheating and fast if they are applied - I'm not prepared to make a rabbit test.

  Usually the number of questions directly because of the installation of Win 8.1 leads me to believe MS didn't diligence to advise suppliers of hardware and software what is needed for their products, or the lead time to update the products work properly with 8.1.  The approach seems to be leave 8.1 loosely in the wild and see what is happening and this case has millions of users totally pissed-off.  This arises out of course to all manufacturers of products have 8.1 installed.

  I have not solved my original problem SOLVED my problems by taking two days to:

  create an image of the disc C 8.1

  format the C drive

  retrieve the original Win 8 OS

  install an image of disk C just prior to installation of 8.1

  recover files of the user of my time with the picture 8.1 8.1

  I have to say during this process, I tried to use disks to repair Win 8 and Paragon B & R product system and the system could not access the optical drive at any time.  I have to wonder what is the use to create a system repair disc if it can not be used.

  I'm now happy homecoming with Win 8 MS to send a bill for all the days I lost trying to sort their damage. Maybe a class action is required by all those who have lost their time with this product to make MS lift their game - I would be one of the first on the list.

  In any case thanks to Terry TwoPointOh for your help.   .. will be mark as solved after you posted this answer...

  I now have to wait 4-6 months with the hope that the 8.1 matures before retry.

• See Group Policy Persona does not

  Hello, wanted to begin test Persona display management, of what it looks like its not difficult to install, however I can't find the group policy, the Viewpm.adm.

  In accordance with the instructions, it will be in one of two places.  Either on the desktop from view after the Agent Install in C:\program VMware View\agent\bin

  or on the servers of connection in C:\program VMware View\server\extras\grouppolicyfiles

  The Viewpm.adm is not in these two places.  There is a v4v_desktopagent.adm, but it is not good policy.

  We run View Horizon Suite version 6.0

  Ive tried to install the last Agent to view one of the virtual machine is to see if that would install the Viewpm.adm, it didn't, and didn't manage Persona for the agent.

  Ive looked in other servers for it as well as our server composer\vcenter and security servers.

  I don't see a download of VMware for it.

  Something has changed with the release of version 6 and its in a different place?  Allocate instructions wheel I had version 5-oriented

  Thank you

  :

  There is a readme in this place who said the following.

  You can download the VMware-Horizon-display-options-Bundle --.zip file on the download site of VMware Horizon (with view) at http://www.vmware.com/go/downloadview.

• Dell 810 reference does not print

  Hello

  I know that similar topics were launched but suggestions to solve the problem do not work, so thought I would start my own.  I had to wipe my pc and so then reinstalled my printer using the disc.  According to the pc, the printer is all good to go but when I press print the icon appears, but then nothing happens and he disappears again.  Have updated the drivers, who have completely removed and reinstalled, you run the troubleshooter (no problem), have checked the port is USB, have tried printing from Notepad, did you check the spooler service is started (and stopped and he did it again) and when you restart the pc it always starts).  I'm completely out of ideas.  Can anyone help?  Thank you

  scrapper78,

  Try reinstalling the printer by following the instructions below.

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Driver Manual printer removal

  Download the 32-bit drivers for Windows 7, 8 and 8.1 32-bit Vista or 64-bit Vista for Windows 7 drivers, 8 and 8.1 64-bit. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  All-in-One printer, Dell 810 owners thread

  Don't forget the virus progrgrams and firewall will block communications.

  Rick

• Dell P513w reference does not connect to a wi - fi connection

  I have a printer Dell P513w I can't join the wi - fi and I can not find the cable

  Hello

  Dell support team published an article based on the knowledge that explains how to connect the Dell P513w printer to a wireless network. Please visit this link and follow the steps.

  Kind regards.

• See second tree level does not display a parameter binding

  Studio Edition Version 11.1.2.2.0

  appears that this problem is addressed in
  http://dailydevfixes.blogspot.com/2011/07/setting-bind-parameters-on-hierarchy-of.html
  Unfortunately I must be missing something.
  
  a test using the hr schema
  I was a tree with the date of hiring as the first level then the employee id, first and last name as the second level.
  I've hard coded employee id for 187 on a bean called by a button.
  
  the first level is updated the second level is unfortunately not (employee id 107 should not appear)

  --1999-02-07
  ----- 187 Cabrio Anthony
  ----- 107 Lorentz Diana

  Here are my first two level is updated, but the second level is not very well what I'm missing
  

      public void ButtonClick(ActionEvent actionEvent) {
          BindingContext bindingctx = BindingContext.getCurrent();
          BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
          DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
          DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("ParentVO1Iterator");
          ViewObject Parentvo =dciter.getViewObject();
          Parentvo.setNamedWhereClauseParam("empid",187);
          Parentvo.executeQuery();
          
          AttributeDef attrDef = Parentvo.findAttributeDef("ChildVO");
          ViewObject childvo = attrDef.getAccessorVO(Parentvo);
          childvo.setNamedWhereClauseParam("empid",187);
          childvo.executeQuery();
  
          AdfFacesContext adfFCtx = AdfFacesContext.getCurrentInstance();
         adfFCtx.addPartialTarget(treeupdate);
              
              
  
          
      }

  Here is the query to the parent object of the view.
  

  select trunc(hire_date) hire_dt 
  from employees
  where :empid is null or employee_id = :empid
  group by trunc(hire_date)

  This is the query for the child view object

  select trunc(hire_date) hire_dt, employee_id, employee_id||' '||last_name||' '||first_name nm
  from employees
  where :empid is null or employee_id = :empid
  order by trunc(hire_date)

  Here is the link to the view

  <?xml version="1.0" encoding="windows-1252" ?>
  <!DOCTYPE ViewLink SYSTEM "jbo_03_01.dtd">
  <!---->
  <ViewLink
    xmlns="http://xmlns.oracle.com/bc4j"
    Name="ParentToChildViewLink"
    Version="11.1.2.61.83">
    <Properties>
      <SchemaBasedProperties>
        <LABEL
          ResId="model.view.link.ParentToChildViewLink_LABEL"/>
      </SchemaBasedProperties>
    </Properties>
    <ViewLinkDefEnd
      Name="ParentVO"
      Cardinality="1"
      Source="true"
      Owner="model.view.ParentVO">
      <DesignTime>
        <Attr Name="_accessor" Value="true"/>
        <Attr Name="_finderName" Value="ParentVO"/>
        <Attr Name="_isUpdateable" Value="true"/>
      </DesignTime>
      <AttrArray Name="Attributes">
        <Item Value="model.view.ParentVO.HireDt"/>
      </AttrArray>
    </ViewLinkDefEnd>
    <ViewLinkDefEnd
      Name="ChildVO"
      Cardinality="-1"
      Owner="model.view.ChildVO">
      <DesignTime>
        <Attr Name="_finderName" Value="ChildVO"/>
        <Attr Name="_isUpdateable" Value="true"/>
      </DesignTime>
      <AttrArray Name="Attributes">
        <Item Value="model.view.ChildVO.HireDt"/>
      </AttrArray>
    </ViewLinkDefEnd>
    <ResourceBundle>
      <PropertiesBundle
        PropertiesFile="model.ModelBundle"/>
    </ResourceBundle>
  </ViewLink>

  and here is the tree
  

      <af:tree value="#{bindings.ParentVO1.treeModel}" var="node"
                               selectionListener="#{bindings.ParentVO1.treeModel.makeCurrent}" rowSelection="single"
                               id="t1" binding="#{myBean.treeupdate}">
                          <f:facet name="nodeStamp">
                              <af:outputText value="#{node}" id="ot1"/>
                          </f:facet>
                      </af:tree>

  Hello

  always your where clause parameters is available.

  ViewObject vo = am.findViewObject("EmployeesView1");
  vo.setNamedWhereClauseParam ("Bind_Batch_NM_Comma_Sep_List", value);

  Take a look at this example: https://blogs.oracle.com/smuenchadf/resource/examples#113

  The sample is for JDeveloper 10.1.3 (so you will not run out of the box), but the code used to define the binding variable values on the tree node is always valid

  Frank