laptop says printer not on a TI is printing Print helpPrinter

Similar Questions

• Computer pavilion laptop G6 - printer does not print

  I have laptop which is wireless and my other computer is on my desk and is connected via a cable internet through the router.   On my desktop, the printer indicates very well, loan and work and I can print, but the laptop says printer offline.   I have checked all cables, etc., but don't know how to get to the printer.

  Hello

  Please contact the Microsoft Community.

  I would have you try the doctor print from here.

  See also article-

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Impossible to connect the printer to the laptop with a wi - fi connection and get a message saying "print spooler does not", even though troubleshooting it says that it is fixed.

  Problems to connect a printer to my lap top using a wi - fi connection and get a message saying "print spooler not working do not ', even though troubleshooting it says it is fixed, any ideas please?

  Original title: install a printer

  I see an error message about "spooler" problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, you may have to restart the spooler to print on your computer.

  To restart the spooler, the simplest method is to save your work and restart the computer. Alternatively, you can try the following steps:

  To restart the print spooler service

  1. You must be logged on as administrator to perform these steps.

  2. Click Start, type: services , then press on enter on your keyboard

  3. Double-click Services.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. Right click on the print spooler service, and then click Properties.

  5. On the general tab, next to startup type, make sure that automatic is selected.

  6. If the service is not already running, under Service status, click Start and then click OK.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

• HP Jet 11-r000na portable 32G: my laptop says "plugged in, not charging" what should I do to fix?

  My laptop says "plugged in, not charging" and 0% butter so when I plugged the charger it stops immediately. What can I do to fix it myself? I would really appreciate the help.

  Dear customer,

  Welcome and thanks for posting your query on the Forum from the HP Support

  It seems that your laptop is not charging the battery, we will surely help you this question

  Please run illustrated steps below to solve the problem:

  Step 01. Click the Start button

  Step 02. Type "Device Manager" in the search box of start and open the Device Manager

  Step 03. Get piles and expand it by clicking on the symbol to the left.

  Step 04. Right click on "Microsoft ACPI Control method battery compatible" & uninstall

  Note: This driver battery is re - install automatically when you restart the laptop

  Step 05. Shut down the laptop

  Step 06. Please, remove the battery and unplug the AC adapter

  Step 07. Press and hold the full power 1 minute button

  Step 08. Go ahead and replace the battery and plug the power adapter

  Step 09. Search for "Load connected" message on the battery icon

  After completing all the steps, if you are facing the same question again, please do more than three steps:

  1 perform a check of the battery in HP Support Assistant [install the software, if this is not available]

  Note: Replace the battery if check the health watch replace

  2 update the latest BIOS for your laptop on the Site of HP Support

  3. Please check your laptop with a well known adapter & different from a notebook battery

  Note: If a known good battery also in charge isn't, we need to replace the motherboard

  How to improve the life of a battery:

  Power management must be set correctly for the extended battery life

  Please keep the brightness of the screen to the lower level

  Please turn off the Wi - Fi Connection when not in service

  Please remove the disc from the optical drive when not in use

  Test and calibrate the battery (Windows 8)

  http://support.HP.com/us-en/document/c03325217

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

• Photosmart 5520 now say 'printer offline' all the time and can not print

  I have a Photosmart 5520 which is brand new.  It was working fine and now when I try to print to it continues by saying "printer offline" and prints get stuck in QC the printer is NOT in offline mode and everything seems fine. Please HELP, I need to be able to PRINT to my printer... I use a MAC with OS 10.6.8

  I was printing to device... fine now for 3 days, going beyond the printer (as.)

  Hello djmastermurph,

  Welcome to the HP Forums! I understand your concerns with your Photosmart 5520. How is the printer connected? USB or wireless?

  Please follow this entire document of HP "Printer is off-line" Message appears on the computer and the printer will not print make sure you only choose your appropriate operating system.

  Let me know if this paper solves your problem or not.

  Impatience on your part.

• HP4240 printer scanner will not scan (says USB not connected) also cannot print attachments in emails

  1. an email has been sent with an attachment in PDF format, but I couldn't print it.

  2. I tried to scan a document and then join an email but the scan says USB not connected. The printer will print however

  Hello

  1. what operating system is installed on the computer?

  2. are you able to print or scan from other applications/program?

  Method 1: I suggest you try the procedure described in the below mentioned link and check if it helps.

  Printer in Windows problems:
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: If the problem is not resolved, you can download the latest driver from the website link mentioned below manufacturer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=457003&lang=en&cc=us&prodTypeId=18972&prodSeriesId=456989&TaskID=135

  Hope this information is useful.

• my laptop says that it is not connected to the internet

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  Can someone help me; my laptop says that it is not connected to the internet, I can't understand the wireless problem but my daughter's laptop connects fine.
  It brought me to this site in question--but is not on the internet? So why he says I am not connected? What is happening lately, it worked fine before?

  Hi Lgbeerle,

  1. What is the operating system installed on your computer?

  2 have you made changes to your computer recently?

  3. where are you getting this error?

  You can access this forum on the Internet. To resolve this problem, I suggest you follow the link and check if it helps.

  Windows wireless and wired network connection problems

  I hope this helps.

• Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?

  Kodak ESPC310 + 0365 and Sony Vaio, printing problem

  Kodak ESPC310 + 0365 and Sony Vaio both on the same wireless network, Vaio says printer offline, so don't not printing - suggestions?

  Hello

  ·         What operating system do you use?

  ·         Remember to proceed with changes in hardware or software on the computer before the show?

  Follow these methods and check if that helps:

  Method 1:

  I suggest you run the fixit tool and check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Follow the steps in troubleshooting section and check if that helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

   

  http://support.en.kodak.com/app/answers/detail/A_ID/19500/selected/true

   

  http://support.en.kodak.com/app/answers/detail/A_ID/1329/selected/true

• my computer says printer ready, but when I try to print it does not say connectedit is a HP 3000 3 month old.

  I have a wireless printer. On the computer it says ready, but when I try to print it says not connected. Help

  Print a Network Setup page using the controls on the front panel of the printer.  See your manual for details.  Some newer HP printers have very summary User Guides (if you have the Deskjet 3000 J310, this means you) and it is difficult to see how - or if - you can print a Network Setup page.

  What you want to do is (a) determine the IP address that is currently configured in the printer and potentially re - configure an IP address of your choice.  You may need to search in the help for the printer on your computer system.  You may be able to access the printer setup utility using your Internet browser or you need maybe connect you the printer to the computer via USB and use the printer installation CD.

  Once you know what the IP address of the printer (and, preferably, how to change), then...

  On your computer.

  • Click Start > printers and faxes
  • Right click on your printer icon, and then select Properties
  • Click on the Ports tab
  • Taking care NOT to click in the list of ports (where you might accidentally change something), click Configure Port
  • Compare the IP address in the box "printer name or IP address.
  • If the IP in the box is not the same as the one you have determined for the printer, make sure.
  • OK your way out and you should be able to print.

  Now... If the above has solved your problem, you might want to know why and probably would like to know how to prevent it from happening again.  Him 'why' is normally your wireless router automatically sets the IP address of the printer.  If you turn the printer off, there is no guarantee that the router will assign the same IP address when you turn back on it, especially if the other devices were connected to your router in the meantime.  There are two methods to deal with this.

  One, you can check the checkbox in the tab "Configure Ports" which always says 'print to this device, even if its IP address changes.'  This is a feature that the HP printer drivers have, but in my experience, it is not reliable.  It works probably better if you change the contents of the box of the IP address of the printer "hostname."  This is something that you should be able to find in the printer setup utility accessed through your web browser.  It is NOT the name of 'Port' that appears on the "Port Configuration" tab in the area above the IP address.

  Two, you can change the way that the printer receives his usual default IP (automatic) address manual, otherwise known as a static IP address.  If you do this, you will need to choose an IP address that is in the same subnet as your router (this means that the first 3 of the 4 series of numbers of the IP address must be the same).  For example, if the IP address assigned to your printer is 192.168.1.105, then any IP address that you select for use as a static IP address for this printer must begin with 192.168.1.  The last part may be any number of through254 2, EXCEPT that it may not be a number this router can assign to something else.  You will find this bit of your router configuration utility.  Or, if your printer was awarded automatically an address with the last part as 100, 101, 102, 103, etc, you'll be pretty reliable if you choose a number far away, but still within the range (for example, 25, 50, 200).

• spool of printer, where and what - what mine says is not runnig

  When I try to print it says printer spool does not

  You can try to disable your print spooling.  This means that when you print, you must wait for printing to stop before proceeding, but it could be a solution.  To do this, follow the instructions in this article:

  "How to troubleshoot issues that you may experience when you try to print to a local printer by using Office programs in Windows XP"
    <>http://support.Microsoft.com/kb/870622 >

  About 3/4 down there is one subsection titled "change the spooler settings."
  This does not solve the problem, but it might get you going again.

  HTH,
  JW

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• I have a hp pavilion dv9205us laptop - Alt print screen does not work

  I have a hp pavilion dv9205us laptop - Alt Print screen (single screen) does not work - operating sys is Vista but XP Professional is my Microsoft application - I can Alt scree printing when I have a keyboard plugged in. - but without the HP laptop has only Prt sc (which is the option further down on the personal key) - without the remote keyboard how can you alt info impression of individual office to another doc. ???

  Thank you very much - it worked, and then just to screen individual, you want to without the entire background behind it - Alt / button FN and Prt Sc then allows me to get that. Once again thank you.

• D110A printer not print correctly. Printer says "printing" but only a few characters on the homepage

  D110A printer not print correctly. Printer says "printing" but only a few characters on the homepage

  Hi amjo_2005,

  How the printer is connected to the device?

  What device you are trying to print from?

  What program you are trying to print from?

• Dell v715w printer says printhead not supported by AI0

  Dell v715w printer says printhead not supported by ao1

  clean the print head, returns the printhead not supported by all-in-one, what should I do?  pls help me...

  Hi Thomas,

  Please refer to this link for reference: http://www.dell.com/support/article/us/en/04/SLN297761. If you need more about the product, you may need to contact your manufacturer.

  Thank you

• Epson XP200 not to connect to the laptop. Printer works fine by itself.

  A new Epson XP200 connects to the laptop. Printer works fine by itself.

  From Internet Explorer

  Original title: connection

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/