Your copy of disk image has been changed since the last opened or saved (Mac OS)

Similar Questions

• Problem with a VM server: "the virtual disk parent has been changed since the child was created.

  Hello!

  I have a problem with a server that does not start.

  We had a virtual machine running on VMWare Infrastructure 3 with two hard drives and an instant backup of them.

  This machine has been removed from the inventory, but when it has been recreated, the secondary hard drive is mentioned for the basic-disk vmdk
  instead of being referenced to the instant vmdk and used for a few days.

  All changes made after the snapshot, were kept in the delta snapshot file, which is not loaded.

  We are with difficult to reference the secondary disk for the snapshot file. We tried to edit the .vmx and hard disk files
  to correct the CID made reference, but when we try to start the virtual machine, we got this error:

  "The virtual disk parent has been changed since the child was created.

  I think it happens because we made a blow-up of a secondary drive a few weeks after the backup snapshot. We spent 30 GB to 50 GB.
  And because it has been referenced and used in another vm.

  *** Log is attached

  Thank you

  Bruno.

  It is a bad sign

  next step in the usual forest is to use "testdisk" since a LiveCD to set the tables MBR and partition - if possible

• Many aspects of the system have been changed since the last update

  My Windows 7 Ultimate did an update this morning at 03:00. When I woke up and went to my computer at 6:00, I noticed a lot of things have changed. All my settings are gone. All my passwords are gone. All my files on my desktop disappeared. All my themes Aero disappeared. All my email settings (Eudora OSE) have disappeared. My preferences folder disappeared.

  It is as if Windows 7 is returned to the original installation and you will have to start all over again. When I go to programs, it seems I have not lost anything, just the folders on my desktop which had shortcuts is gone. When I go to desktop customization, all themes that I had loaded down disappeared.

  I had created a restore point yesterday. It's over. This morning, the update created a restore point. I could guess the use this restore point, but will not be my system try to rerun the update? I just live with it and try to implement brand new? Don't they test these updates before release? Very frustrating!

  Hi TheFox22,

  There are several things that interfere during the installation of Windows update and cause a few problems.

  I suggest that you perform the restoration of the system to the point that was created before the updates were installed.

  If you want to install the Windows update again, you will need to disable the security software installed on the computer and also the third-party program installed on the computer step called clean boot, it's to stop their interference during the installation of the update of Windows.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  I suggest that you put the computer in a clean boot state and then go to Windows update and install all available updates and check manually.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get the date and time that a procedure/function has been modified for the last time?

  Hi all
  
  In Oracle Developer Tools for Visual Studio 2005 can I highlight a function, or a procedure and in the Properties window, it shows me the func/proc has been changed for the last time, and also when it was created
  
  Where can I get this information?
  
  See you soon
  CJ

  table object last_ddl_time

• The document has been changed since its creation and use of the extended functionality is no longer available

  I have Adobe Acrobat Reader DC 2015.016.20039 on my system. I filled a form using Foxit Reader. When I tried to open the form with Adobe Acrobat Reader DC I received the error "the document enabled extended in Adobe Acrobat Reader DC features. The document has been changed since its creation and use of the extended functionality is no longer available. Please contact the author for the original version of this document.

  I tried other PDF programs, no problem at the opening of this form.

  

  Function "Activation reader" comes from the original shape, and it's essentially a digital signature. It is specific for the free product of Viewer PDF by Adobe (aka Adobe (Acrobat) Reader).

  The problem is that only Adobe products are able to (re) make these documents without breaking the seal of the digital signature.

  So, what happened in your case is the Foxit Viewer broke the seal during the recording of back and what's. Using Acrobat, you can save a copy of the form, and then continue will fill. Otherwise, you will be better off to start over, but stay with viewers Adobe PDF all the time, working with the form, or with a different Viewer, once again all the time you work with the shape.

  BTW, player XI and most recent no. have more need of extended for more rights blocked by previous versions of Reader. This is not enough in this case; only, it would be useful for the sender of the form.

  Update (after rereading of the original message): if it's just for viewing or print the form, you can ignore this message. You can also try to save just, you have a version of player who no longer has the rights extended (at your risk).

  I hope this can help.

• If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  If my disk defragmentation has been stopped and the computer tells me to check the log events for more details how can I do my accessible Defragmenter again?

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Type these commands in the start menu, run a dialog box:
  Here's how:
  a. Click Start.
  b. in the run box, type the following commands one by one and press to enter.

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll
  
  Method 2.
  I. to resolve this problem, follow these steps:
  a. Click Start, run, type % Windir%\Inf, and then click OK.
  b. right-click the dfrg.inf file and then click on install.
  OR
  II. Alternatively, you can reinstall Disk Defragmenter using the following command:
  a. Click Start, run and type that the following command and press ENTER.
  Rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\dfrg.inf

  I hope this helps.

• I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I would like to get the list of all devices on which my creative cloud has been activated for the last six months or a year

  I do not think that information... Adobe titles represent the only link I know following your accounts, but not where the programs are installed

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

• HPCM error - definition model has changed since the last calculation

  Hello world
  
  I have a bit of a problem on an application Coordinator.
  
  (1) message warning when I go to balancing-> "model has changed since the last calculation."
  (2) message when I select cube considered in balancing-> 'the database has not been updated with the latest results of calculation."
  
  What has been done before I got to this point:
  
  (1) add a few lev 0 members in the current hierarchy for cost center
  (2) run a comparison to check if they are picked up (OK!)
  3) deploy EPMA (result: SUCCESSFUL message)
  4) go to HPCM and deploy the two cubes (OK-> at least is what the status of the job)
  (5) control of new members in OTL (OK! they are there)
  (6) the HPCM Calc launch, check the box to erase all data of calc prev, check the box to regenerate calcs, check the box to transfer data to the reporting cube.
  result: employment status: OK!
  
  But in reality: never got transferred through to the reporting cube.
  
  I repeated steps 1 through 6, a few times, I even changed something in the (alias) shared library to check if it went through.
  In EPMA it says that the app is 'in sync with the deployment. And when I run a comparison with deployed application, it does not pick up anything.
  
  Any ideas?
  
  Thank you
  
  Kind regards
  Annie

  Hello world

  Just realised I never came back with the answer to my question. I was developing the new application and starts the compilation of the Calc sequentially, so while I was developing Calc for step 2 or 3, rebuild only those scripts are calculate only the specific areas. This is the reason why I received this message. As soon as I transferred both apps and recalculated at the beginning, the error message disappeared.
  Just in case someone wondered.

  See you soon,.
  Annie

• Make a small change to an old project - how can I know which versions of drivers and RIO etc. has been used for the last good generation?

  If I want to make a small change to a legacy project for years before, I would limit my risk using the same exact versions of LabVIEW, etc. NOR-RIO.  So I check the project from the repo, but I do not know how to check what versions have been used when the last know good generation was carried out.  I don't want to introduce questions by recompiling mass to the latest version.

  What is advised in this case?  I could, before every posting of repo, take a screenshot of the tree of MAX software and save it in the project file.

  Any ideas?

  Rather than create a screenshot of MAX: MAX can create a report for you. You can take all the information expected of her.

• British English chosen for keyboard but my @ above the number 2 has changed "since the last Update. He want to come back...

  Since the last OS update two or three days ago my pre-selected keyboard has changed.  They keyboard watch my @ sign is greater than the number 2 - and it has always been up to was last updated.  Now he has changed places with the "display sign beside the semicolon key.;  I have UK chosen as my favorite keyboard, but this seems to be too governed by something else. How can I fix this to what it was?

  If you go to System Preferences-> keyboard-> input methods is your keyboard the value 'British' or 'British PC?'

  I ask that the keyboard layout of the standard British PC has quotation marks ("") above the 2:

  

• Cannot update Acrobat Pro because the contents have been changed since the original installation

  My system tells me it's time to update to Acrobat. It allows me to go through the download process, but then I get a message saying...

  «The update could not be applied because the Adobe Acrobat application contents have changed since the original installation.» If please reinstall Adobe Acrobat and look for updates again.

  What I have to download all of the Suite to reinstall Acrobat?

  I use Adobe Creative Suite Design Standard v 6.0

  Yes, you must use the installation files immediately if your acrobat was part of this suite.  That is to say, your serial number work with the purchased product.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• External hard drive where the stored images has been corruptd. The images recorded, but now cannot connect with LR

  I got LR cc 2015 put in place so that the images have been imported on my external hard drive and lightroom files were stored there. This hard drive has failed, but I was able to save all my files (original) and I transferred to a new external hard drive. Now, I can't get LR to recognize the new drive and location. LR albums have? next to them. I would appreciate any help you can give me that I have try to reconnect LR with the new source of my images. Sorry, I'm not very technologically.

  Tom

  There are 153 images in this catalog, all on 1 external. Which does not seem right, or you expect very different numbers, could you give me an idea of what numbers you expect?

  This seems to be an empty catalog with any folder. It seems to me that you have opened an empty catalog somehow. Could you please try file-> open the recent item and see if any of the other catalogues listed is the one you want? If this does not work, could you please try to restore a recent backup of your catalog file and see if the situation is resolved?

• What should I do when I receive the message that Disk Defragmenter has been programmed with the help of another program?

  I use the 64-bit version of Windows 7, 1.3 terabytes on my hard drive free and have a very slow computer. When I checked the Task Scheduler, it shows that the Defragmenter should start every Wednesday at 01:00 and the last time he had run was 12/10/2011.

  I would like step by step, answers I can get, as I'm not all that good on the computer. Thank you.

  Solution...

  Reset the calendar... to run every DAY.

  This will be as EFFECTIVE as running the DEFRAGMENTATION program in...  AUTOMATIC mode...

  Or, (mostly) running in the background, think about it, you are the one who has a TERABYTE of hard drive... to defragment?

  The Defrag program defragments only the AMOUNT of hard drive FILLED, in any case.

  I throw my computer this way, ETM, it works very well, indeed.

  And I did that 2 x 250 GB disks hard.

  XP, on one.

  Windows 7, on the other.

  What about your computer being SLOW, LEARN 'How - to' clean UP the cache of COOKIES.

  On a DAILY BASIS, too!

  UOI can use a UTILITY program... to do this and make things easier for you. .

  Many say "do not use these programs. You have trouble if you do. »

  These are professional computer repair people, who want TO "your business and they may not have IF you use these utility programs that fix your computer.»

  (Without "aid", that is!)

  I used Glary Utilities program... for years.

  It works vvery wel. For me!

  Nest part about this, if you FORGOT to clean the 'cookies', this program will do for you IF you set up right.

  That IS, to set up the section of Maintenance with a SINGLE CLICK, he always appears FIRST time run successfully, where each segment is CHECKED.

  And you RUN it... until no. PROBLEMS appear.

  As I said... I usung this program for years and my computer runs as smooth as silk.

  Seeing that the way you run a 64-bit operating system... I WOULD add more RAM for your computer.

  I would say that you may be using ONLY 2 GiG of RAM, a 64 bit OS that is not enough.

  4 GB will work OK, that makes 8 GIg in a Kick butt machine.

  Some time in the task of upgrade, an upgrade of... graphic .the CERTAINLY won't hurt, either.

  He'll be fine, with this terabyte hard drive you are using.

  Now, it will be that a machine might want.

  I use a 322-bit OS, but this drive hard terabyte THEN is on my list of "improvements".

  Like 2 of them.

• My monthly subscription has been changed by the support team for an annual subscription and now I can't cancel

  I moved from one country to the other and my account had changed with the help of the Adobe support team because it was impossible to do it on my own (couldn't change the country myself).

  And the country support team also placed slot my monthly subscription to annual model and makes a "cloud for creative teams", although there is no team as I am a single user.

  Now I'm running into problems because I want to cancel my subscription, but im stuck with the annual subscription. I hope that there is a way to solve this issue in a satisfactory manner.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Windows has completely changed since the automatic updates

  My PC with Windows 8 began an automatic update about 3 days ago. I can't do anything to cause this. It took a long time to complete. Anyway, when it's over, it was as if I had a completely different PC. Now, when I turn it on, it goes straight to the office rather than to start with the tiles Page. When I change to the Start Page, it's completely different. She added 8 new applications, and the bottom of the page is different. If I want to pin a site or application to the Start Page, this selection has gone, and I don't know how to get it back. I don't know what happens, but I wish it was the way it was. What can I do or where I can find what to do to fix this? Help, please!

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You receive a message error when you say, "If I want to pin a site or application to the Start Page, the selection has disappeared?

  It seems that the Windows 8.1 is now installed on your computer.

  You can refer to this article:
  Overview of Windows 8.1
  http://www.Microsoft.com/OEM/en/products/Windows/pages/Windows-8-1-Overview.aspx#fBid=1CAmY2naqXJ

  As you mentioned that you are unable to pin sites or app to the start screen, I suggest you to refer to this article and check if that helps.
  Reference:
  Customize the splash screen
  http://TechNet.Microsoft.com/en-us/library/jj134269.aspx

  Note: Please see "for the design of the splash screen" section of the article above.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you