Will be wireless G range expander router work with WRT160N wireless

Similar Questions

• There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.

  There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
  I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
  I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?

  original title: problem with the map?

  Hi GustavTak,

  1. you have made no changes to the computer before the broadcast took place?
  2. do you get an error message?

  Try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Set up a wireless router
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router

• Can my router work with ADSL2 / VDSL?

  I've been using a Linksys Wireless - G ADSL Annex-A gateway, WAG200G router and it has been fine, now my ISP told me that they are to modernize the network and need a router capable of managing ADSL2 / VDSL connections, so my router will be able to do or I have to buy a new one? Firmware 1.01.09, any info would be much appreciated.

  Edit: I see the menu Modulation DSL which is fixed currently in 'Multimode' I also have options to select ADSL2, ADSL2 +, ADSL2, ADSL2 + AnnexM and ASDL2 AnnexL AnnexM but I see no mention of "VDSL.

  # The router is not compatible VDSL. You will need a new modem. This 'problem' is the main reason why I usually recommend to get a separate, simple and an ethernet router. The ethernet router operates independently of the access technology, i.e. you can switch to ADSL, VDSL or cable technology is what you have to change the modem, and you can continue to use the router.

  You would have only to upgrade the ethernet router if it is too old and too slow to manage your new internet speed...

• will be microsoft picture it 2001 publishingplatinum, work with vista home preium?

  Microsoft Picture It Platinum Edition 2001 installs, but when I try to use it it stops. Did the same thing in XpSP2 Compatibility Mode or ME / 2000.

  Compatibility

  Compatibility

  Personally, I got the Picture It! version since 1999
  and (for me), Digital Image Suite 2006 is by far the best.

  If you really, really want to run Picture It! 2001 or 2002...
  you could look in Dual boot Vista and XP... or maybe
  run a Virtual Machine with Win XP on your Vista system.
  There is a full version of XP that can be activated.

  Just beware that all support and updates for end XP in 2014.

  The following links are examples and will give you an idea
  of what is involved. I suggest you to perform detailed searches
  on this before starting.

  It's the equivalent of two operating systems
  and both would need maintenance. The beauty of the
  Virtual machine, it is that you can create more than one and
  If it is delete it. Imagine having an operating system
  running in a window on your Vista machine.

  (1) dual Boot

  How dual boot Vista and XP (with Vista installed first).
  the guide step by step with screenshots
  http://apcmag.com/how_to_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystep_guide.htm

  Install Windows XP on your pre-installed Windows
  Vista computer
  http://www.howtogeek.com/HOWTO/Windows-Vista/install-Windows-XP-on-your-pre-installed-Windows-Vista-computer/

  (2) Virtual Machine

  Microsoft Virtual PC 2007 SP1
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24439

  Geek to live: run Windows XP in Vista with Virtual PC
  http://Lifehacker.com/238071/geek-to-live--run-Windows-XP-Inside-Vista-with-Virtual-PC

• Linksys WRE54G Range Expander

  I have set up with linksys E4200, but it does not connect to my computer, the blue light showing but the link light will market

  Well well its compatibility problem... Because the router that you have a router Wireless N technology and the amplifier you are trying to install is wireless G technology... So it won't go to work... However, you can get a with N-technology wireless range Expander that works with your router and the model number for the same is RE1000.

• Most of the software do not work with Windows 7. Get the error internal 577 or say "Not Compatible".

  Original title: does not work with Windows 7 Internal error 577 people saying "Not Compatible" some just to start all__And more

  I just got a new pc with windows 7 on it. NONE of the software or programs I had on my other pc running windows xp with service PAC 2 will work. The resolution of compatibility issues doesn't help no one can tell me why all the software that I do not work!

  What is in windows 7 and not windows xp which is stop ALL my programs not to work, no matter what I try.

  More than 13 hours on the phone and many emails and nobody can give me a clear answer. Thay all tell me to go to the provider of the program! Sellers tell me it should work, then return & suite back & suite. PLEASE, SOMEONE CAN'T ME TELL HOW THESE WORK PROGRAMS AND GAMES!  ILS ALL WORKS very WELL WITH WINDOWS XP and used now work at all with windows 7

  Please HELP, I spent WAYYYY too much money on the children's playground and other business and tax software that now does not work with windows 7

  Also Im not the smartest person so if someone does not respond that I need step by step instructions. Thank you very much

  I can also be reached at * address email is removed from the privacy *.

  Hello Jimmie Jr.,

  The problem is that the software or programs that have been created for the previous operating systems such as Windows 95/98/XP have no way to correctly work with an operating system like Windows 7 that did not exist when the programs were written. Windows Vista and Windows 7 have been written on a different kernel of Windows 95 and Windows XP. However, you can try compatibility mode and if this does not work you can try using a virtual machine to run the software. Much of the time the software publisher will publish updates to make old software work with newer operating systems.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows XP or other system that the program has been run successfully operating.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If compatibility is not successful, then try and self-test program compatibility issues:

  1. open the program compatibility problems theStart button.

  Then click on Control Panel. In the search box, typetroubleshooter, then clickTroubleshooting. Under programs, clickRun done for previous versions of Windows.

  2. follow the instructions in the troubleshooting.

  If you are unable to install a program, insert the installation disc for the program and, using the Troubleshoot utility, navigate to the program setup file, usually called Setup.exe, Install.exe, or something similar. This utility is not designed to work on programs that have an .msi file name extension.

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this helps you understand better.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I work with LR on two computers and maintain synchronization?

  I y fotos and lightroom installed on your desktop (MAC). As I travel a lot, I would work on my laptop (MAC) will receive realize but then sync my work with my office when I get home.

  Ho do I do?

  Unfortunately, Lr does still support the synchronization of the catalogues. However, you can place your catalog on an external hard drive that is connected to the computer of your work at any time. Many Lr users find this approach is quite simple to manage. Alternatively, you can keep a copy of your catalog on both computers. This first part of this video using Lightroom on two computers - YouTube described describes how. If you use Lr5 or higher, then you must actually copy the actual photos that Smart previews can be used a proxy files. Intelligent previews are much smaller, so much more effectively to carry photos around on the laptop.

• What wireless router works well with Satellite A200-401

  On the point of buying a computer laptop Satellite A200-401 can anyone suggest a good affordable wireless router that works well with this?

  Steve

  HM, this is a strange question because I doesn´t depends on the machine, the card information wireless installed. But in general a Netgear router is always a good choice... they are reliable, Don t need a lot of power and you can expand your network with these special Nergear '"Externders = range.

  I have a Netgear WGR614 and it works like a charm, it has everything you need.

  Here´s a link:

  http://www.NETGEAR.com/products/RoutersandGateways/GWirelessRouters/WGR614.aspx

  Check it out. :)

  Welcome them

• A WN3000RP will work with a router SMCWBR14S-N4

  You want to buy a range extender WN3000RP on Amazon, but do not want to go through the hassle of return it (if it is still logged) if it does not work with my router SMCWBR14S-N4. Anyone has any experience? (product description says it's 'universal')

  Thank you!

  Hi rapnet.

  Yes, please see the installation manual:
  http://www.downloads.NETGEAR.com/files/GDC/WN3000RPV3/WN3000RPv3_IG_8Jul14.PDF

  Located at the support page:

  http://support.NETGEAR.com/product/WN3000RPv3

• Canon RC-6 wireless trigger will work with Canon ST-E3-RT transmitter to the camera?

  I'm trying to know if the Canon RC-6 trigger Wireless will work with a Canon ST-E3-RT mounted on the camera.

  The ST - E3 = RT works very well to the camera, but I prefer not to buy RE-6 without knowing that it will work.

  Appreciate any input.

  Jerry

  Bob,

  Thanks for the reply.  If I remember correctly, for the IR, the remote control must be used in front of the camera, opposes

  Radio FREQ.

  Thanks again,

  Jerry

• Lose connection Wireless at some site but when work around the site router works

  Original title: Wireless problems

  When I am connected to my wireless router, some sites such as who's who, I lose the internet connection. He said SSL issues.or CE NE MAY NOT BE THE SITE YOU ARE looking for "but when I bypass the router, the problem goes away. There are other laptop on the router there is NO problem. What can I do?

  Hello Dennis,.

  I'm sorry that you have a problem trying to connect to some Web sites.

  Just to make sure I understand your question, you lose the internet connection only to some Web sites, but if you unplug your router, you are able to connect to the website like Facebook without problem.

  Let's start with the basics on the wireless connection.
  -Make sure that the cables are properly connected to the router.
  -Restart your router, turn it off for 45 seconds and then turn it back on
  -Try again to connect to the problem site.
  -Update your drivers for your network card wireless

  Then I'd suggest that you update the firmware on your router. Go to the router manufacturer's website and download the latest version of the software package.

  Here is some information on the use of networks wireless that might be useful:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  If you still encounter a problem after trying the steps, answering the post again and I'll be happy to work with you for additional options.

  Sincerely,

  Marilyn

• The tablet of Microsoft Surface will not work with my printer HP Photosmart 5510 current wireless?

  I need to get a new laptop as my only current becomes slow and unresponsive, so I thought I'd do a Microsoft Surface tablet when they become available. I only bought my printer a couple of months, and it would really be a guy, if it was not compatible with the Surface.

  Also, I downloaded the Windows 8 Preview of consumers, and in trying to connect my printer, it wouldn't install because it did not support the operating system, telling me to make sure I was using XP or Win 7. After a few weeks, I returned to windows 7. Does this mean that my printer will not work with any version of Windows 8, either on a tablet or PC?
  I thank in advance.

  HP alone are responsible for the support of pilot and he will be at their discretion. If it is a very recent model, HP will probably out drivers more or less at the same time as Windows 8 in fact for the shelves of stores...

• What wifi router works best with an iMac

  Please be nice to me I don't really know what I'm talking about, but really really need help.  We have an iMac with wifi connections and currently run a cisco linksys e1000, who is five years old at least, and I'm sure is very tired, either completely obsolete.  We have a lot of buffering when using our Apple TV and someone recommended to get a

  ASUS RT-N66U - 900Mbps router dual band Wireless-N Gigabit LAN/WAN, 2 x USB, printing FTP UPnP Server VPN, IPv6 to replace the Cisco.  It will work with our IMAC?  Do we need a separate thing called a modem.  If it won't work not please can any kind person recommend a router to update that works.

  Thank you very much

  Vicki

  Use the Apple Airport Extreme Base Station.  The modem is what connects the router to your cable service.

• MN - 700 router worked for a while (over 3 years) without password. How to set a password? __

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  MN - 700 router worked for a while (over 3 years) without password. How to set a password?

  This is a pretty old router, but documentation is still available from Microsoft:http://support.microsoft.com/kb/902461 the 'Guide' is more complete, but the "Base Station Configuration Guide" will explain how to configure the router.

  I guess what you mean by a "password" is the password for the wireless encryption (there is also a password that controls access to the router configuration utility). The following are the basic steps to configure wireless encryption (see the documentation for more details and screenshots):

  1. utility access to the router configuration, preferably with a computer connected to the router with an Ethernet cable (if you change your wireless security, the parameters using a computer connected to the router by wireless, the connection will be abandoned as soon as you click APPLY).  Open a web browser and type 192.168.2.1 in the browser address box.  If you have not changed the logon password, enter 'admin' (without the quotes, all lowercase).

  2. click on the "Security" link on the home page of the configuration tool, then "Wireless Security".

  3. Select the "niveau_chiffrement" in the combo box to "256-bit WPA - PSK (louder)" - unless all of your wireless devices are so old they don't support WEP (unusual for a wifi device years less than 5 or 6).

  4. in the box, type a password (between 8 and 63 characters), and then click 'apply '. at this point, you will be disconnected from the router (and the Internet) If you did the above changes using a computer connected to the router WiFi.   Write the password in a place where you don't forget.

  5. close router configuration utility.

  To set up your wireless computers:

  6. open network connections (start > run > ncpa.cpl > OK)

  7. right click on your wireless adapter icon and select Properties.

  8. click on the wireless networks tab

  9. make sure the box at the top next to "use Windows to configure my wireless."

  10. in the list of "Preferred networks", select the entry to your router (your network name), click on 'delete '.  [This deletes the entry from your wireless network WITHOUT a password, so that you will be able to add an entry for a network with the same name WITH a password.]

  11. click on the view wireless networks"" button.

  12. the name of your network should appear in the list of wireless networks.  Select it and click "connect". When you are prompted for the password, enter the WPA password set in the router configuration.

  13. open a web browser and confirm that you can access the Internet.

• The WPS54G Wireless Print Server works with Vista?

  The WPS54G Wireless Print Server works with Vista? I have a new Dell Vista laptop and unable to connect to the print server. The other XP machines on my network will connect correctly.

  I just got credit working mine in the answers above with a few small differences.

  1. Add the appropriate printer from the control panel > printers > add printer

  2. Select local printer, and then select [Create New Port] > [Standard TCP/IP Port]

  3. [device type] > [TCP/IP device]. Host name or IP address must be the IP address of the print server device.  I use a linksys router and difficulty mine to 192.168.2.10.  Check and are not [query the printer for and auto...]

  4. once nothing is detected, select [custom] > settings

  5. Select LPR, L2 the name value in the queue for a USB printer.  Turn on [LPR active of counting bytes.  Queue names are distinguished by the printer and I think as Mfg ("queue name" search and replacing your printer for queue names.)

  6. Select the Mfg and printer

  7. If the test page does not have a last thing, it is turn on [Control Panel] LPR Print Services > [programs and features] > [activate Windows features ON OFF] pane.  Go to [Print Services] and check on [LPR Port Monitor]

  Hope that makes the magic for you.