See Security with smartcard Auth Server

Similar Questions

• Windows XP service pack 1 fails with the error "server has not responded.

  After that a delay of a minute or two, running the SP1a update .exe (sp1aexpress_usa.exe) well failure I have an active Internet connection

  It does not work every time with a "the server has failed" after telling me that this error has occurred when trying to download files from XP Service Pack 1.

  I tried four times over a period of three hours is not an appearance of time.

  Thank you

  Jim

  Hi Jim,.

  If you already have the Service Pack 1 (SP1) is installed, we do not recommend to install SP1a. Instead, I you suggest to download and install the Service Pack 2 (SP2) and then update SP3 to continue to receive.

  For how to obtain the latest service pack, see How to obtain the latest Windows XP service pack

  See also: information about Windows XP Service Pack 3

  Note: The Support for Windows XP with Service Pack 2 (SP2) will end on July 13, 2010. If you are running Windows XP SP2 after support ends, you will not receive updates of security for Windows. To maintain your Windows XP computer up-to-date download Service Pack 3 via Windows update.

• Windows Vista will not synchronize with internet time server

  I am running Windows Vista Business SP2 and Norton Internet Security on a Lenovo T61.  All updates for Windows, Norton and Lenovo have been applied.  When I try to synchronize with a time server Internet, I get the error message ' year error occurred while synchronizing with time.windows.com "I tried each of the other servers listed time and still get the same error message.  I spent reviewing the configuration of the firewall in time of Norton Internet Security and S32 and port 123 are enabled.  I tried to synchronize with the two Norton Internet Security Firewall on and outside, with the same results. I have internet google and looked for a solution of Microsoft.  After reading all the posts relating, I tried the following:

  running administrative invite

  net stop w32time

  w32tm /unregister

  w32rm /register

  net start w32time

  Each performed positively.

  This has not solved the problem.  I then ran:

  w32tm/config /update

  This is performed in a positive way.

  This has not solved the problem. I then ran:

  w32tm/Resync /rediscover

  He responded with "the computer did not resync because no time data was available"

  I then ran:

  w32tm/query/status

  He responded with "last successful synchronization time: not specified.

  The local Group Policy Editor reads for providers of Service/Computer Configuration/Windows Administrative Templates/time/system time

  Configure Windows NTP Client not configured

  Enable Windows NTP Client not configured

  Enable Windows NTP server not configured

  In summary, it seems that my computer has never synchronized with an Internet server time.

  If you need additional information, please provide specific instructions on how to get it and I will provide.

  From time to time, I checked to see if I resync of internet time.

  Out of the Blues started windows resynchronize.

  The only change I can think is that AT & T reset head of communications AT & T defaults shortly before he started work.  This tends to confirm my opinion that it was a problem of communication.

  PROBLEM SOLVED!

• SSL: Cannot communicate securely with peers

  Hi all!

  Recently, Google do upgrade the android GMail app.

  Now he has the opportunity to connect to the POP/IMAP account - it's good again.

  Bad news is that you can not connect to MMP.

  I see in the newspapers imapproxy

  [07/Nov/2014:10:28:16 +0300] mail-2 ImapProxyAService.cfg[16692]: General Error: (id 601429) SSL negotiation failed for IP 172.20.10.52:
  Cannot communicate securely with peer: no common encryption algorithm(s). (-12286 11)
  

  Is it possible to fix it.

  Version of the server is

  Oracle Communications Messaging Server 7.0.5.30.0 64bit (built Oct 22 2013)
  libimta.so 7.0.5.30.0 64bit (built 14:31:48, Oct 22 2013)
  Using /opt/sun/comms/messaging64/config/imta.cnf (compiled)
  SunOS mail-2 5.10 Generic_148888-03 sun4u sparc SUNW,Sun-Fire-V240
  
  

  Monk.

  Most likely, your NSS version is outdated. From MS7.0.5.31.0 (patch - 31), the patch bundle now the latest NSS version available at the time so the Solaris OS NSS/NSPR patches are no longer a requirement.

  Ms. 7.0.5.34.0 (patch - 34) is the latest that comes bundled with NSS version 3.17.1

  My MS 7.0.5.34.0:

  #. / imsimta version

  Mail server Oracle Communications 7.0.5.34.0 64bits (built October 14, 2014)

  libimta.so 7.0.5.34.0 64-bit (built 12:21:13, 14 October 2014)

  With the help of /opt/sun/comms/messaging64/config/imta.cnf (updated)

  NSS library version: 3.17.1 Basic ECC

  I get the additional algorithms:

  #. / sslconnect - v 10.220.18.149

  Following list of the SSL/TLS enabled cipher suites:

  TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 (0X009E)

  TLS_DHE_RSA_WITH_AES_128_CBC_SHA (0 X 0033)

  TLS_DHE_DSS_WITH_AES_128_CBC_SHA (0 X 0032)

  TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 (0 X 0067)

  TLS_DHE_RSA_WITH_AES_256_CBC_SHA (0 X 0039)

  TLS_DHE_DSS_WITH_AES_256_CBC_SHA (0 X 0038)

  TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 (0X006B)

  TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA (0 X 0016)

  TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA (0 X 0013)

  TLS_RSA_WITH_AES_128_GCM_SHA256 (0X009C)

  TLS_RSA_WITH_AES_128_CBC_SHA (0X002F)

  TLS_RSA_WITH_AES_128_CBC_SHA256 (0X003C)

  TLS_RSA_WITH_AES_256_CBC_SHA (0 X 0035)

  TLS_RSA_WITH_AES_256_CBC_SHA256 (0X003D)

  TLS_RSA_WITH_3DES_EDE_CBC_SHA (0X000A)

  TLS_RSA_WITH_RC4_128_SHA (0 X 0005)

  TLS_RSA_WITH_RC4_128_MD5 (0X0004)

  SSL_CK_RC4_128_WITH_MD5 (0XFF01)

  SSL_CK_RC2_128_CBC_WITH_MD5 (0XFF03)

  SSL_CK_DES_192_EDE3_CBC_WITH_MD5 (0XFF07)

  tsock_connectbyname(): getaddrinfo call...

  -Deb

  -------

  If you have any questions or need help more the resolution suggested, please open a request Service through MOS

  Say thanks if you feel you have the right answer by marking any relatively useful for 5-point response unit or correct for 10 points.

• Problem with Integrated Weblogic Server in JDeveloper

  Hello

  I use JDeveloper version: 11.1.1.7

  I am facing problem with the Weblogic Server integrated into JDeveloper.

  When I start the server, the log shows as follows:

  Using the 7101 port *.

  D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\bin\startWebLogic.cmd

  [waiting for the server to complete its initialization...]

  .

  .

  Memory of JAVA arguments: - Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512 m

  .

  Start mode of WLS = development

  .

  CLASSPATH=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\sdoapi.jar;D:\fmwps6\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;D:\fmwps6\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\fmwps6\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Java\JDK16~1.0_5\lib\tools.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\fmwps6\WLSERV~1.3\server\lib\weblogic.jar;D:\fmwps6\modules\features\weblogic.server.modules_10.3.5.0.jar;D:\fmwps6\WLSERV~1.3\server\lib\webservices.jar;D:\fmwps6\modules\ORGAPA~1.1/lib/ant-all.jar;D:\fmwps6\modules\NETSFA~1.0_ 1/lib/Ant-contrib.jar;D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;D:\fmwps6\WLSERV~1.3\common\derby\lib\derbyclient.jar;D:\fmwps6\WLSERV~1.3\server\lib\xqrl.jar;;D:\ fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\config;D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\lib\stringtemplate-2.3b6.jar

  .

  PATH=D:\fmwps6\patch_wls1035\profiles\default\native;D:\fmwps6\patch_jdev1111\profiles\default\native;D:\fmwps6\WLSERV~1.3\server\native\win\x64;D:\fmwps6\WLSERV~1.3\server\bin;D:\fmwps6\modules\ORGAPA~1.1\bin;D:\Java\JDK16~1.0_5\jre\bin;D:\Java\JDK16~1.0_5\bin; C:\Program Files\Common Files\Microsoft Shared live; C:\Program Files (x 86) \Common Files\Microsoft Shared live; C:\oraclexe\app\oracle\product\11.2.0\server\bin;;D:\ ADE\bin; C:\Windows\System32; C:\Windows; C:\windows\System32\Wbem; C:\windows\System32\WindowsPowerShell\v1.0\; C:\Program Widcomm logiciels\. C:\Program Widcomm Software\syswow64;D:\Java\jdk1.6.0_51\bin;D:\Softwares\apache-ant-1.7.1\bin. C:\Program Files (x 86) \Windows Live\Shared;D:\fmwps6\WLSERV~1.3\server\native\win\x64\oci920_8

  .

  ***************************************************

  * To start WebLogic Server, use a username and *.

  * password assigned to an administrator-level user.  For *.

  * server administration, using the WebLogic Server *.

  * the http://hostname:port\console console *.

  ***************************************************

  from weblogic with the Java version:

  Java version "1.6.0_51".

  Java (TM) SE Runtime Environment (build 1.6.0_51 - b31)

  Java for 64-bit Server VM (build 20, 51 - b02, mixed mode)

  WLS starting with line:

  "D:\Java\JDK16~1.0_5\bin\java-client-Xms768m-Xmx768m - XX: CompileThreshold = 8000 - XX: PermSize = 128 m - XX: MaxPermSize = 512m-Dweblogic.Name=DefaultServer-Djava.security.policy=D:\fmwps6\WLSERV~1.3\server\lib\weblogic.policy - agentlib: jdwp = transport = dt_socket, server = o, address =-Djavax.net.ssl.trustStore=D:\fmwps6\wlserver_10.3\server\lib\DemoTrust.jks 49879 - Dhttp.proxyHost = www-proxy.idc.oracle.com-Dhttp.proxyPort=80"-Dhttp.nonProxyHosts = localhost | 127.0.0.1 | rnaguban - in '-Dhttps.proxyHost = www-proxy.idc.oracle.com-Dhttps.proxyPort=80 "-Dhttps.nonProxyHosts = localhost | 127.0.0.1 | rnaguban -»-Doracle.jdeveloper.adrs=true-Dweblogic.nodemanager.ServiceEnabled=true-Duim.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM-Dweblogic.log.Log4jLoggingEnabled_uim=true-Dlog4j.configuration_ = UIM loggingconfig.xml-Duim.logging.watchdog.timer=5000-Djava.io.tmpdir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\tmp-Dweblogic.management.discover.retries=6-DtestConfig.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\UIM\testConfig-Dsun.lang.ClassLoader.allowArraySyntax=true - XX : - UseSSE42Intrinsics - DUSE_JAAS = faux - Djps.policystore.hybrid.mode=false-Djps.combiner.optimize.lazyeval=true-Djps.combiner.optimize=true-Djps.authz=ACC - Xverify : aucun-da-Dplatform.home=D:\fmwps6\WLSERV~1.3-Dwls.home=D:\fmwps6\WLSERV~1.3\server-Dweblogic.home=D:\fmwps6\WLSERV~1.3\server-Djps.app.credential.overwrite.allowed=true-Dcommon.components.home=D:\fmwps6\ORACLE~1-Djrf.version=11.1.1-Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger-Ddomain.home=D:\fmwps6\JDEVEL~1\SYSTEM~ 1.93\DEFAUL ~ 1- Djrockit.optfile=D:\fmwps6\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt-Doracle.server.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\servers\DefaultServer-Doracle.domain.config.dir=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1-Digf.arisidbeans.carmlloc=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\carml-Digf.arisidstack.home=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\FMWCON~1\arisidprovider-Doracle.security.jps.config=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\config\fmwconfig\jps-config.xml-Doracle.deployed.app.dir=D:\fmwps6\ JDEVEL~1\SYSTEM~1.93\DEFAUL~1\servers\DefaultServer\ tmp\_WL_user-Doracle.deployed.app.ext=\--Dweblogic.alternateTypesDirectory=D:\fmwps6\ORACLE~1\modules\oracle.ossoiap_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.oamprovider_11.1.1,D:\fmwps6\ORACLE~1\modules\oracle.jps_11.1.1-Djava.protocol.handler.pkgs=oracle.mds.net.protocol-Dweblogic.jdbc.remoteEnabled=false-Dwsm.repository.path=D:\fmwps6\JDEVEL~1\SYSTEM~1.93\DEFAUL~1\oracle\store\gmds-Dweblogic.management.discover=true-Dwlw.iterativeDev=-Dwlw.testConsole=-Dwlw.logErrorsToConsole=-Dweblogic.ext.dirs=D:\fmwps6\patch_wls1035\profiles\default\sysext_manifest_classpath;D:\fmwps6\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic. Server

  Listening to dt_socket to address transport: 49879

  The debugger is connected to the local process.

  < 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 16 August 2013 19:19:43 IST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 16 August 2013 19:19:44 IST > < Info > < WebLogicServer > < BEA-000377 > < since Java hotspot 64-bit Server VM WebLogic Server Version 20, 51 - b02 Sun Microsystems Inc. >

  < 16 August 2013 19:19:44 IST > < Info > < management > < BEA-141107 > < Version: WebLogic Server temporary fix for BUG13114768 Sat Jan 21 16:14:44 IST 2012

  WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 1398638 2011 >

  < 16 August 2013 19:19:47 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 16 August 2013 19:19:47 IST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:19:47 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log. >

  < 16 August 2013 19:19:47 IST > < opinion > < Log Management > < BEA-170019 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log server log file is opened. All events in the log server-side will be written to this file. >

  < 16 August 2013 19:19:56 IST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:20 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log00066. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\access.log. >

  August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info

  INFO: Sent Notification of mapping object config reloaded

  August 16, 2013 19:20:05 oracle.ods.virtualization.engine.util.VDELogger info

  INFO: Sent Notification of mapping object config reloaded

  < 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 16 August 2013 19:20:18 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 16 August 2013 19:20:20 IST > < WARNING > < JDBC > < BEA-001552 > < data source for logging last resource (LLR) InventoryTxDataSource does not work when it is a participant in a global transaction that spans several WebLogic Server instances because JDBC remote support is disabled. LLR will work in one configurations. >

  < 16 August 2013 19:20:22 IST > < WARNING > < JDBC > < BEA-001110 > < no table test didn't put in place for the pool "SDM-commsRepository" Connections will be tested. >

  < 16 August 2013 19:20:39 IST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 16 August 2013 19:20:58 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored, because the application UIMCMWSAdapter is not versioned. >

  < 16 August 2013 19:21:11 IST > < WARNING > < J2EE > < BEA-160195 > < application version of the lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the oracle.communications.inventory application is not versioned. >

  < TableBuilder > < _buildSchema > metric "webcache:request_filter_denied_stats" table has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Information ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Performance ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Server_Response ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Reports_Servlet_Response ' has no key column.  It will not be seen.

  < TableBuilder > < _buildSchema > metric table "reports: Remote_Bridge_Elements ' has no key column.  It will not be seen.

  < ConfigurationUtil > < getProperties > was not able to load runtime - poms.properties

  < 16 August 2013 19:21:52 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login www.terracotta.org/80 now.

  java.net.UnknownHostException: www-proxy.idc.oracle.com

  at java.net.Inet6AddressImpl.lookupAllHostAddr (Native Method)

  in java.net.InetAddress$ 1.lookupAllHostAddr(InetAddress.java:876)

  at java.net.InetAddress.getAddressFromNameService(InetAddress.java:1229)

  at java.net.InetAddress.getAllByName0(InetAddress.java:1180)

  at java.net.InetAddress.getAllByName(InetAddress.java:1110)

  Truncated. check the log file full stacktrace

  >

  < 16 August 2013 19:21:53 IST > < error > < Net > < BEA-000903 > < could not communicate with the proxy: www-proxy.idc.oracle.com/80. Try to login svn.terracotta.org/80 now.

  java.net.UnknownHostException: www-proxy.idc.oracle.com

  at java.net.InetAddress.getAllByName0(InetAddress.java:1184)

  at java.net.InetAddress.getAllByName(InetAddress.java:1110)

  at java.net.InetAddress.getAllByName(InetAddress.java:1046)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:309)

  at weblogic.net.http.HttpClient.openServer(HttpClient.java:414)

  Truncated. check the log file full stacktrace

  >

  < LoggerHelper > < Journal > cannot map non-serializable type "interface oracle.adf.mbean.share.config.runtime.resourcebundle.BundleListType" to open MBean Type for mbean interface oracle.adf.mbean.share.config.runtime.resourcebundle.AdfResourceBundleConfigMXBean, attribute BundleList.

  < AdfDiagnosticsJarsVersionDumpImpl > < dumpVersionInfo > version jars discharge path: D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\oracle.communications.inventory-Versions.csv

  < FeatureUtils > < _resolveFeatures > Ignoring feature-dependency on the function "AdfDvtCommon".  There is no such feature.

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 223

  < 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320400 > < D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 16 August 2013 19:22:08 IST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00118. Log messages will continue to be logged in D:\fmwps6\jdeveloper\system11.1.1.7.40.64.93\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log. >

  < 16 August 2013 19:22:08 IST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 16 August 2013 19:22:09 IST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 14.96.8.250:7101 for iiop, t3, ldap, snmp, http protocols. >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000331 > < started WebLogic Admin Server "DefaultServer" domain "DefaultDomain" running in development Mode >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >

  < 16 August 2013 19:22:09 IST > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >

  But it does not list the server while deploying the application.

  I don't see the problem to my office network. But I have this problem when I work from my home.

  Ideally, it should show the following lines after the server is started:

  DefaultServer startup time: 195467 ms.

  DefaultServer began.

  This is not the case if I start the server without network.

  How can I solve this problem?

  Thank you

  Ravi

  I see some message on a proxy. Have you checked that you can use the proxy on your network?

  If this isn't the case, you must disable the proxy.

  Timo

• HP Elite X 2 1011 G1 compressed: secure with BCU TPM activation error

  Hi, I am trying to activate the TPM secure with BCU, but every time I get this error at startup

  "MUD embedded controller data are invalid then that MPM is locked.
  Please MPM to unlock and lock again to capture data of valid MUD. "with accept and 10 - > 0 counting down.

  -I am able to change the other settings of the BIOS with the BCU, but not of TPM.

  -the BIOS password

  -J' I reset the default bios settings

  This is the file I used for config

  BIOSConfig 1.0
  Security level of TPM device
  * Change
  View
  Hide
  TPM Embedded Security security level
  * Change
  View
  Hide
  BONES of TPM security level management
  * Change
  View
  Hide
  Reset the TPM secure of operating system security level
  * Change
  View
  Hide
  TPM reset to the factory settings
  * No.
  Yes
  Reset the TPM security of OS
  Disable
  * Select
  BONES of the TPM Management
  Disable
  * Select
  Activate the TPM on next startup
  Disable
  * Select
  TPM device
  Hidden
  TPM 1.2
  * TPM 2.0
  TPM activation policy
  * F1 at startup
  Allow the user to reject
  No prompt

  And it is the newspaper (after the second execution of the script, all the parameters have been updated in the first inning, but TPM activate next startup update every time I run the script)

  19/07/2016 11:25:22.240764 | 9040 | Definition of | HP:hared:treamLog:treamLog. Severity of log level > = Info
  19/07/2016 11:25:22.240764 | 9040 | Info | HP:hared:treamLog:treamLog. BEGIN.
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | * HP c. 4.0.15.1 Bios Configuration utility *.
  19/07/2016 11:25:22.240764 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Platform: 2009 - HP Elite x 2 1011 G1 compressed
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | BIOS version: 1.13 16/05/2016
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Manufacturer: Hewlett-Packard
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Computer name: CL103009999204
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Serial number: 5CG55264Z8
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Unicode supported password: Yes
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS: Microsoft Windows 10 Enterprise 64-bit
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | OS version: 10.0.10240
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | Command line: [BiosConfigUtility64.exe / set: new.repset /cpwdfile:12345678.bin / verbose/l]
  19/07/2016 11:25:22.897080 | 9040 | Info | BiosConfigUtility::InitInstance | *****************************************************
  19/07/2016 11:25:23.022093 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "password successfully reading the file" / >
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation 'TPM Device security level' with 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM Embedded Security security level' with the 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of implementation "OS management of TPM security level" with the 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting "Reset of TPM of operating system security level" with 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Responsible for defining 'TPM reset to the factory default values' with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full setting 'Reset the TPM for OS' 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of "OS management of TPM" layout with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Charge of setting 'Enable the TPM on next boot' with 2 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Full adjustment "TPM Device" 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Riddled with political 'TPM Activation' attitude 3 values.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:GetSettings | Read the 10 file settings.
  19/07/2016 11:25:23.318998 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Apply all the settings of the BIOS
  19/07/2016 11:25:26.350584 | 9040 | Info | biosconfig::FileSettings:ApplySettings | In 'Device TPM security level' changeStatus = 'skip '.
  19/07/2016 11:25:26.366188 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Embedded Security security level' setting changeStatus = 'skip '.
  19/07/2016 11:25:26.381834 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'The OS level security TPM Management' layout changeStatus = 'skip '.
  19/07/2016 11:25:26.417235 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "Reset of TPM of operating system security level" changeStatus = 'skip '.
  19/07/2016 11:25:26.439250 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'TPM reset to the factory default values' changeStatus = 'skip '.
  19/07/2016 11:25:26.458811 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Reset of the TPM for OS' changeStatus = 'skip '.
  19/07/2016 11:25:26.475825 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Implementation changeStatus "OS the TPM Management" = "jump".
  19/07/2016 11:25:26.571695 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting 'Enable the TPM on next boot' changeStatus = 'pass' returnCode = 0 oldValue = newValue 'Disable' = 'enable '.
  19/07/2016 11:25:26.591711 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Setting "TPM Device" changeStatus = 'skip '.
  19/07/2016 11:25:26.614732 | 9040 | Info | biosconfig::FileSettings:ApplySettings | 'TPM Activation strategy' setting changeStatus = 'skip '.
  19/07/2016 11:25:26.642752 | 9040 | Info | biosconfig::FileSettings:ApplySettings | Processing parameters: 10, errors: 0 warnings: 0, was ignored: 9, succeeded: 1
  19/07/2016 11:25:26.649256 | 9040 | Info | biosconfig::utils:howMessage. < SUCCESS msg = "no error occurred" / >
  19/07/2016 11:25:26.649256 | 9040 | Info | HP:hared:treamLog: ~ StreamLog | End.

  See you soon

  I noticed that using TPM 1.2 does not give me this problem, so I went to that and everything was good. I expected that TPM 2.0 was less probematic, but it is not true.

• Avast internet security with windows 7 Professional compatibility

  Avast internet security with windows 7 Professional compatibility

  before you buy this HP I had avast internet security paid license

  can install this program in my HP without problem?

  tank you very much

  Francisco

  Francisco,

  You could simply stop the Microsoft Essentials if it's getting in the way.

  Prevent the Microsoft Antimalware Service starts automatically

  If you cannot find the software under the name mentioned in the article, locate the service called Windows Defender.

  The same rule applies: set the service to manual start or disable the service.

  =========================================================================

  Opinions differ on the question of whether Microsoft Essentials / Defender should indeed be removed or If disabling services is sufficient.

  Pouvez Avast! Pro co-exist with MS Security Essentials?

  My 8.1 or OS systems, Windows Defender has been disabled (together) - no problems with Avast first.

  =========================================================================

  For your peace of mind, you may contact Avast and ask their opinion with reserve.

  Avast, support

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• A security update for SQL Server 2005 Service Pack 3 (KB970892) could not istall

  "A security update for SQL Server 2005 Service Pack 3 (KB970892) istall failure."

  I'm not sure if this is the right place to post this but I hope I can get help.
  I can't get the update mentioned above to install after several attempts. Have searched the knowledge base and tried various suggestions of solutions without success.
  If anyone has or had this same problem and it is resolved, I'd appreciate knowing how and where to get information. Thanks in advance for your help and your computer happy.

  Rhamnar68It

  "A security update for SQL Server 2005 Service Pack 3 (KB970892) istall failure."

  I'm not sure if this is the right place to post this but I hope I can get help.
  I can't get the update mentioned above to install after several attempts. Have searched the knowledge base and tried various suggestions of solutions without success.
  If anyone has or had this same problem and it is resolved, I'd appreciate knowing how and where to get information. Thanks in advance for your help and your computer happy.

  Rhamnar68It

  It isn't really the right place (better would have been the forum of Windows Update ), but see the following thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/cafab790-e540-40d3-87ba-4f64e6e82d54/

• A security update for SQL Server 2005 Service Pack 2 (KB948109) guard installation time and again. __

  
  Security for the SQL Server 2005 Service Pack 2 (KB948109) update has successfully installed but the icon comes back no matter how many times I install the update.  What can I do?

  Not much info in this part of the newspaper.

  Again, it may be more appropriate post on this forum:
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/
  as they are use to deal with these updates.

  When I mentioned the installation of the update in safe mode, I was suggesting the full file downloading and then installing in safe mode.

  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=kb948109&displaylang=en&sType=s_basic TaurArian [MVP] 2005-2010 - Update Services

• Outlook express crashes when connecting with the mail server

  Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

  Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

  Steve

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Relocation of maintaining security for the SQL Server 2005 Service Pack 3 (KB2494113)

  Update Windows guard re - install of a security update for SQL Server 2005 Service Pack 3 (KB2494113) again and again and again, several times a day if I allow it.  He seems to be in every time and produces no error message.  How can I stop this constant re-installation to occur?

  I use a laptop Dell XPS M1530 is running Windows Vista Edition Home Premium service pack 2.

  Hi Marty,

  Try using this http://support.microsoft.com/kb/971058 utility and see if that fixes the problem. Otherwise use this tool to check/fix corrupt packages on your system: http://support.microsoft.com/kb/947821

• "Cannot select"[Gmail]"on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. »

  Original title: "error message"

  I get this error message whenever I try to download my gmail account

  Header for the file download "[Gmail]" has not completed. Cannot select "[Gmail]" on the IMAP server. You could try refreshing your folder list to synchronize with the IMAP server. Account: 'imap.tools.sky.com', server: 'imap.tools.sky.com', Protocol: IMAP, server response: ' unknown mailbox: [Gmail] (failure)', Port: 993, secure (SSL): Yes, error number: 0x800CCCD2

  Please repost your question on the Forum of GMail at: http://www.google.com/support/forum/p/gmail/label?lid=745896f193361992&hl=en where the experts to GMail will be happy to help you.  You can also try technical assistance tohttp://mail.google.com/support/.  It is a GMail problem, not a problem of Vista.  If you use an e-mail program rather than online access, then it is possible that the e-mail program settings are incorrect. We do not know these settings but people to GMail.  That said, here's the IMAP settings for a number of e-mail programs (generic parameters - obviously not including your specific account):http://mail.google.com/support/bin/topic.py?hl=en&topic=12806.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!