See the Windows 10 virtual machines as "Available" in the administration Console, even while users are connected

Similar Questions

• Not able to see the Administration tab for Admin users to one of the Planning Application.

  Hello

  We use the Hyperion Planning 11.1.2.2 and when I connexiona one of the planning application, I'm not able to see the Administration however when I connexiona other applications I see the administration tab.

  "" What I did is that I created a test user in the native directory services shared and implemented the "interactive user" role of the application. When I logged in one application, I don't see the administration tab however when I logged into another application, I can see the administration tab.

  can someone help me solve this problem.

  Did any who face such a problem before. Thanks in advance

  Kind regards

  VJ

  We must reconfigure the deployment on application server and Web server after installing the patches, and once reconfigure us the Java heapsize would become by default that we must change them by going to regedit and this is how the above question will be resolved.

• Help please... Replaced the hard drive of MBP, restored from TM, but the Windows XP virtual machine does not start

  I replaced the 250 GB hard drive in my MacBook Pro early 2009 with a 500 GB drive, it the Mac OS extended (journaled) format and restored from my Time Machine backup.

  Now when I try to start my Windows XP virtual machine (using Fusion 2.0.6... planning upgrade to 3.1.2 but wanted to validate all was well first), I get BSOD, even in safe mode.

  I have my vm separately saved on a network drive data files based on things that I had read before, I do not think that TM backup of virtual machines. However, a friend with a similar setup with more knowledge I think because I could see my Windows XP vm VMWare listed under 'Documents' in Time Machine showing its full size, it has actually saved and there restore it. Apparently he has done this successfully before.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  TIA!

  Katie

  To be clear: you have restored VMs from the disk or network time Machine?  And if the network drive, what backup method you use?  (i.e.: have you just copied engine off the computer virtual package or not?)  Can you copy/restore the virtual machine to the network again drive?  What is a virtual machine that has the error, or other virtual machines have problems?

  Time Machine backup correctly a virtual power off machine. But since Time Machine works automatically, you often will get not a consistent backup unless you do some tricks to make sure Time Machine backup only when you use a virtual machine.  (i.e.: turn on Time Machine only when you're done with the virtual machine.)  Thus, it is normally recommended to exclude the virtual machines from Time Machine and use another method to back up virtual machines.  Your friend is lucky or is only backup virtual machines powered off.

  Should I have partitioned the hard drive? I don't think that my previous drive has been partitioned. Don't know what to do now.

  The Mac player Paritioning is unnecessary unless you use Boot Camp or have required another for the partition.

• Belvedere on the installer of Windows 7 virtual machine on the server

  We currently have a SCADA running Lookout 6.0.2 and you want to upgrade to 6.7.1.

  I interested him running Lookout 6.7.1 on Windows 7 virtual machine on a server.

  Someone has done this? Have tested the lookout 6.7.1 on a PC with Windows 7, I have no idea if the lookout will run on the virtual machine.

  Is - this in anyway beneficial define Lookout this way? Need information please.

  Thank you

  All the ma, but two of my servers run under VMs on Hyper-V.  The other two are running on (remote) VMware enterprise configurations.  Everything works beautifully.   I use Ethernet Server series brands such as Moxa or Pearl for any devices that are not native ethernet.  I even ran Ethernet USB on a few occasions, but that can be risky.

• How to reset the administrator password in my Windows XP Virtual Machine

  I just created a Windows XP virtual machine and have been using it without any problem.  Today, I started the machine and he asked an administrator password.  I believe that I have not set up one that I've never been asked before.

  How can I reset my password or I have to rebuild a new machine?

  Can I use a password reset utility?

  Thanks in advance for any help.

  Kind regards

  Doug U - M

  If an empty password does not work then you probably have to rebuild the virtual machine. This time, I recommend adopt you the practice of setting up a second admin account immediately and make a note of the password. It's the same when you buy a new car: you get at least two sets of keys.

• Windows 7 virtual machine - stop even if someone is connected via RemoteDesktop

  Hello

  I have a machine virtual windows 7. It runs on a host SLES 11 SP3 with KVM. When the host wants to stop the virtual machine, it signals the vm via ACPI. But if someone is connected via RemoteDesktop, virtual machine refuses to stop. KVM waits a while, then turns off the virtual machine. Is it possible to stop a windows 7 even if someone is connected via RemoteDesktop?

  Something like for example a registry key?

  Thank you.

  Bernd

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you are facing problems with Windows.

  I suggest you post your query on The TechNet Forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Backup my Windows XP virtual machine.

  I need to know what files I need to copy so that I have a backup of my Windows XP virtual machine. I use Time Machine to back up my Mac, but I've read the discussion properly if not the right way to go. If anyone can please tell me what to do in case I have a hard disk crash.

  Fusion obscures the VMs - files in a package.
  If you open you a list of files.

  More important are all VMDK + vmx file.

  But to simplify it - simply copy all files while the virtual machine is turned off

• Windows cannot access \\RIPSERVER. You are not allowed to access \\RIPSERVER... I can see the \\RIPSERVER on my network but cannot connect.

  Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.

  Thanks in advance for your help.

  Hi RC383,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Mail keeps asking for my username and password, and even if they are correct he still doesn't and comes repeatedly asks me for the info

  That makes me MAD! Windows Mail - checking the user name and password &!

  It makes me crazy.

  For the last few days my Windows Mail keeps asking for my username and password and even if they are correct it still doesn't and comes repeatedly asks me for the info again and again. I deleted the account mail twice now and re added it but it still does not work. I can send emails but not receive. I have McAfee but I aiinstalle only this yesterday so that isn't the problem. the error message is:-
  Account: 'mail.talktalk.net', server: 'mail.talktalk.net', Protocol: POP3, server response: '-ERR Authentication failed.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  Please help I need to retrieve my emails! Thanks, Sarah

  McAfee is a huge problem with Windows Mail.  See www.oehelp.com/OETips.aspx#3 if you want to use, wait until you get the job of Winmail.

  Check if you can connect webmail and that works very well and it's not a problem on the end of the server messaging or because of misspelled powers.  Then delete your account in WinMail, compact and repair the database (see www.oehelp.com/WMUtil/) and make sure that you have disabled the e-mail analysis then add your account to mail back again and see if it works.

  Steve

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• Whenever I try to log on to the administrator account, it will start to connect, but immediately disconnected return.

  Original title: why my account automatically disconnect?

  I am running Windows Vista Home Premium.

  Whenever I try to log on to the administrator account, it will start to connect but then before he's even changed screens, immediately disconnect back.
  I can connect to it using safe and I ran Anti-malware, Microsoft Security Essentials and Advanced System Care and they have all come without any problem.
  Now, I guess I'm using an account with administrative privileges but different. I just need to open Windows Media Center, but every time I try, it says: I'm on the guest account. My machine won't let me create a new account, delete other accounts, or even to change the passwords. In addition, a random ASP.NET account appears and I can't remove it.
  I don't understand what I could do wrong. Any help is greatly appreciated.

  Hi Jorgomli,

  1. you receive messages or error codes when you try to connect?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  Because you can connect to the account administrator in safe mode, you can try to create a new safe mode administrator account and check.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Step 2:

  If still face problems, then you can try setting the default Administrator account and check if you can solve the problem.

  a. click the Start button

  (b) in the Start Menu, click all programs followed accessories

  c. in the menu accessories, right-click on command line option

  d. in the drop-down menu that appears, click on the "Run as Administrator" option

  e. If you have the User Account Control (UAC) enabled, you will be asked for permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  f. in the command prompt window, type the command net user administrator / Active: Yes and press ENTER.

  g. close the elevated command prompt.

  h. log (in the Start Menu) and you will see your new administrator integrated next to your current account.

  i. click the photo icon display built-in Administrator account and connect to it.

  If the problem is resolved, then you can create a new administrator account and check.

  You can try to create a new administrator account by following the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  You can also try disabling the default Administrator account using the command

  NET user administrator / active: No.

  Hope this information is useful.

• Sign in to the administration Console is very slow

  Beginning of time server is very well.
  But when, for the first time that I try and sign in to the administration console, the page admin console takes a long time (about 20-25 minutes).
  
  The version of the weblogic server is 10.3.2.
  
  There are no errors in the server log file.
  
  No idea what can be the problem?

  What is the description of your server? Memory, processor speed, etc. So is Unix or Windows? You can do some settings on the server, adding more memory ito the java virtual machine in the initialization scripts. This might help, but if your hardware is not great, it won't help much.

  Greetings

• How can I get the administrator rights on my user account?

  OT: Without administrator rights.

  I don't have my active administrator account.

  I had a user account that I removed myself from the group administrator.

  Now I'm locked to do anything.

  I can't assign me to the admin group, I can't allow the user to administrator, I can't edit some files or delete some software...

  I tried cmd but get access denied when you try to activate the administrator account. It does not help if I open CMD or anything else with administrator privileges.

  I can't open the recovery mode, tried to start in safe mode and all the rest.

  How can I get the administrator rights on my user account?

  I had a user account, which I removed myself from the group administrator.

  -> This is called "paint yourself in a corner.

  I tried cmd but get access denied when you try to activate the administrator account. It does not help if I open CMD or anything else with administrator privileges.

  -> Is normal. Either you are an administrator, or you're not.

  How can I get the administrator rights on my user account?

  -> Ask a friend to burn a CD repair system for you (Control Panel / backup and restore). Now to use this CD to start the machine in Repair Mode, and then use the system restore to set Windows to a point before you downgrade your one and only the admin account.

  When you're done, plan ahead a little and create, test and document a spare, even admin account that you have a spare House key. This will save you a lot of trouble.

• find details of DB of the administration console

  Hi all
  
  We have SOA11g server. Now, I want to find the database used for this server in the administration Console.
  Please help me in this.
  
  TIA,
  Bob

  Hi Bob
  1. basically, a domain of default SOA must 2 diagrams to store all the metadata. They are SOAINFRA and MDS. They are prefixed as DEV_ or anything you want. And if your SOA domain also has stuff BAM reports, there is another schema named ORABAM created.

  2. so, you want to know where these patterns exist as the database host, port, sid, user name.

  3. If you have administrator privileges, log in weblogic console. Left side, expand Services-> Data Sources. Now right side, you will see a bunch of datasources created specifically for the field of the SOA. Click on a DS named SOADataSource. Click the Connection Pool. Up here, you should see db url, driver of the db and db username. It is not clear the plain text password. Do the same for the other data source named mds - soa, BAMDataSource (if you have BAM). Don't worry much about data sources. Basically, if you get the details for that which is ok. Because most of the time, all patterns will be in the same database, but this is not mandatory.

  4. If you have access to the physical location of this area on the machine, you can access this folder structure and open .xml files to see the same details. This is where all of the source xml data files are stored. The location is: yourSOADomain/config/jdbc

  Thank you
  Ravi Jegga