See the value of properties

Similar Questions

• I have some 24 and 32-bit PNG. On the bridge Panel, I don't see the value of bit depth.

  I see the value of bit depth (8-16-32) for the PSD but when I generate a .png32 that this value does not appear on the Bridge Panel file properties; I check on Panel detail of Windows image viewer and it says 32 bit. Thanks for your help!

  Hi iolnation,

  No, Bridge does not show the depth of bits for PNG files. You may apply for a feature on the link below, telling them why it is important for you to see the depth of bit for PNG in Bridge. I'm all for anything that will affect better PNG.

  Community customer Photoshop family

• Can not see the values for the value of the field Position Flex games

  Hello
  
  I want to see the values associated with the Position to flex fields segments set of values. The valueset is the section of Position Flex field of the HRMS.
  When I go on request > FlexField > key > values and look for the defined value, it does not appear in the list of value games. I am unable to find a game for any segment of values. The two sets of value are at table in function.
  Can someone tell me why I can't see them?
  
  Abdul Wahid

  Base table of values defined value, you can see until you go in application where this segment is used... you can still run the SQL derived from table according to value set where the conditions (if any) to see the values. I hope I understood your question

• See the value of the parameter in the oracle report

  Hi experts,
  Can you please tell me how I can see the value of a parameter in the report. I send you a form parameter and I want to see its value in the report.
  
  Is there a function like message in the report.
  
  Another thing can you please tell me how I can do use triggers in the forms.
  
  Concerning
  Rajat

  Hello

  the builtin SRW. MESSGAE can be used:

  SRW. MESSAGE (100, 'the P_1 = parameter value' |: P_1);

  Concerning

• I can see a value of properties, but I can't get the value

  I'm trying to access the threshold values for alarm

  $alarmDef = get-AlarmDefinition "Datastore use."

  $alarmDef.extensiondata.expression.expression.

  results in:

  Operator: isAbove
  Type: Datastore
  Metric: VMware.Vim.PerfMetricId
  Yellow: 8500
  YellowInterval:
  Red: 9000
  RedInterval:
  DynamicType:
  DynamicProperty:

  So I can see the yellow (8500) and Red (9000) values from above. so, I'm going

  $alarmDef.extensiondata.expression.expression.yellow

  but she returns nothing?

  The correct path is

  $alarmDef.extensiondata.Info.expression.expression

  but I guess that it was just a typo.

  The Expression property points to an array, even if there is only 1 expression, you will have to use an index.

  Like this

  $alarmDef.extensiondata.Info.expression.expression [0]. Yellow

• See the value in histogram

  Hi all
  
  In one graphic, by default, the column value is not displayed in the chart, then hover your mouse over the column of the table, the value of the column will appear, I want to show the value of the column to the default chart, I can do?

  Chart, properties-> datalabel see her->
  Change on rolling forever.

  Thank you
  Vino

• How to see the values of the attributes of global context?

  Hi friends,

  There is a context (namespace) in DBA_CONTEXT and DBA_GLOBAL_CONTEXT. But it is not available in SESSION_CONTEXT and ALL_CONTEXT. (It is only on the schema in the instance).

  The context Type is ACCESSIBLE on a GLOBAL scale. My version of Oracle's 11g 2. Please help me to find the values of the attributes of the context. Thanks in advance.

  Try to use the GLOBAL_CONTEXT instead...

  See http://docs.oracle.com/cd/E11882_01/server.112/e17110/statviews_5126.htm#REFRN29087.

  Gerard

• Movement of keyframes does not - I can see the values change, but nothing happens in the monitor!

  I'm having a nightmare trying to program in a few Motion keyframes to change the position of an element in my program monitor.

  I created the image key to assign the value of the position of an element in the timeline - I want the clip to move toward the Center on the side of the screen. I followed the guidelines and can see the keyframe symbols appear in the view of key images marking the beginning and the end of the change. What is strange, is that when I press play, I can see values changing in the effect controls panel - but nothing really happens in the clip! The clip in question has a silhouette figure, that I created using images of the figure against a green screen, which has then been hidden. I then applied a track matte key to the below item to fill the silhouette with footage - this has something to do with my animation does not?

  I checked to assure that I do apply keyframes for the clip, checked parameters interpolation of keyframes of & all seems in order. I'm new to first, & I apologize if I've properly referenced the different tools or windows - but I hope you get the idea. I looked online but can't find someone reporting a similar issue, that is certainly a first when you are working with such a popular program. I hope that it is something stupid and can be easily solved.

  Can someone tell me why the keyframes, I could, & can change the clip plays, are not actually affecting the clip at all? Any help would be greatly appreciated.

  I realized after the announcement that if I applied the keyframe to the matte rather than the silhouette clip keyframes of the movement worked. Thanks for the advice so guys!

• Unable to see the value of elimination in the Budget scenario

  I'm having a problem with the Consolidation of the 'Budget' of my application scenario. The PIC are not eliminated and < entity currency > value of each PEAK is roll up to the parent. Consolidation works very well for the scenario of 'real '; PKI eliminations are correct and do not affect the value of < entity currency > of the current parent, and I can see values in [disposal], while there is no data (#Missing/0) in [removal] for the scenario of 'Budget '. The parameters are the same in both scenarios:

  DefaultFreq: BAT

  DefaultView: CDA

  ZeroViewForNonadj: CDA

  ZeroViewForAdj: CDA

  [ConsolidateYTD:]

  DefFreqForICTrans: CDA

  Consolidation rules are enabled in the settings of the application. Here are the elimination of Sub rule:

  Void StandardElim (strAccount, PKI, PCon)

  '==============================

  ' ELIMINATION STANDARD =

  '==============================

  "Start by assuming that we will do an elimination

  CanEliminate = TRUE

  "There are four criteria that need to be passed to the elim

  '------------------------------------------------------------------------

  If PIC = "[ICP no]" then

  CanEliminate = FALSE

  ElseIf (HS. Account.IsICP (strAccount) = FALSE) then

  CanEliminate = FALSE

  ElseIf HS. Account.PlugAcct (strAccount) = "" then

  CanEliminate = FALSE

  ElseIf (HS. PARENT. ISDESCENDANT (HS. PARENT. (Member, PKI) = FALSE) then

  CanEliminate = FALSE

  End If

  '------------------------------------------------------------------------

  "If you spend them four tests do the elim

  If CanEliminate then

  HS = strPlug. Account.PlugAcct (strAccount)

  dial the HS. Con("V#[Elimination]",-1*PCon,"")

  dial the HS. Con ("V #[disposal].") ("" "A #" & strPlug, PCon, ' ")

  End If

  End Sub

  This subroutine is called in the part Consolidate() of the rules file:

  Dial the HS. Con ("", PCon, "" ")

  Call StandardElim (Account, PKI, PCon)

  And the PCon variable is:

  HS = PCon. Node.PCon("")

  I tried to change it so it would use 'Real' consolidated percentage [PCON] balance scenarios, although this was unnecessary because property data are the same for both scenarios.

  HS = PCon. Node.PCon ("S #Actual")

  I tried all different types of POV in my grid of codification. Nothing. From my understanding, the scenario is a dimension of the page and should not be specified in the rules file to consolidate the Sub () as he pulls from the current point of view.

  I've been at this for a few days and I'm officially stumped.

  Can anyone give me any suggestions?

  Thanks a bunch!

  I actually solved this issue.

  The values of PEAK of the partner entities were missing in the data file for the budget, but were present for the exercise. This is because our planning application do not have a dimension of PKI, so when data is loaded from planning through FDM dimension using the HFM database 'Actual' scenario, the PIC is left blank. Then when the 'Budget' data are sent to HFM for peacebuilding, there is no PEAK value, that's why the intercompany partners do not eliminate the first parent.

  I'm looking for solutions for this problem. An explicit mapping to FDM may not work because we have some entities with multiple partners. We must create a dimension of ICP in the Planning...

• I don't see the values of the settings like position, scale, and all the rest?

  I don't see my values of parameters. Here is an image to see exactly I mean http://img513.imageshack.us/img513/1282/issue.jpg . There is no value for the position and scale... How can I solve this problem?

  You hid the A / V column. Right-click on the column headings to reveal again.

  Mylenium

• See the value of Smartlist in Web analysis

  Hello
  
  I am creating a web analytics report that will show a member account. Member account has been defined as a SmartList data type in planning. I would like to ask how to display the value of the Smart List (label), on the report to display instead of display the ID of the smartlist entries? Thank you very much in advance,
  
  I use 11.1.1.3 the planning version.

  Hello
  There is no such feature as far as I know. If possible I would be happy to know, but I just checked the documentation by curiosity and could not find a reference to it. Unfortunately, it is not a very capable tool.
  An idea could be to aid implementation conditional form (or traffic lights) with a caption under the grid that indicates the meaning of each color. I hope that you don't have many entries in the active list.

  See you soon,.
  Alp

• Not able to see the value of the item description-&gt; main classification

  Hello group,
  
  I configured the responsibility of China. From now on, I'm not able to see the lov primary classification in the item Description screen.
  
  China HRMS Manager-> Total Compensation-> Description-> primary Classification (column) element the only value that is gathering is "initialization of balance."
  
  Where we, the responsibility, I am able to see more options. Can someone suggest me the reason for the same.
  
  Thank you
  
  It's 11.5.10 version

  Hi please refer to the below metalink note...
  566421.1 setting form element has a single value in the primary Classification balance initialization
  See you soon
  Ganesh

• See the value of zero instead of "the value entered does not match the format of the field [].

  I use the simplified notation filed to perform subtraction on a budget form.

  They all have an excellent work and have no problem display a value of zero when it's a simple subtraction (value1-value2).

  However, on my last field I want to take the total income and subtract what I spent (approximately 40 fields) and get a balance zero.

  When I try to do it I get this warning "the value entered does not match the format of the field [].

  The calculation works fine and displays the correct value for all the foregoing ".» 01 "and displays negative numbers. 01 "and underneath as well (if I go on the budget), she just may not show a zero, which is my goal for this equal to zero each month.

  I tried to watch if the forms and have not found an answer that works even for my situation.

  
  Happy to post the form here, just do not know how to do it.

  Thanks in advance,

  The custom calculation script may be something like the following:

  Get the value of field of income, as a number

  var v1 = + getField("Income").value;

  Set up an array of domain names

  var aFieldsToSubtract =]

  "ThithesB,"

  "TailleB,"

  "EFundB,"

  "MortgageB,"

  "HomeItemsB,"

  "HomeRepairsB,"

  "ElecticB,"

  "GasB.

  "WaterB."

  "SewerB,"

  "TrashB,"

  "PhoneB."

  "InternetB."

  "AutoInsB,"

  "UmbrellaB,"

  "IdentityB,"

  "CosmeticsB,"

  "ToiletriesB,"

  "PocketEBB,"

  "PocketCBB,"

  "GiftsB,"

  "HouseSuppliesB,"

  "PersonalOtherB,"

  "PersonalOther2B,"

  "GroceriesB,"

  "RestaurantsB,"

  "ClothingB,"

  "CarGasB,"

  "CarRepairsB,"

  "CarOtherB,"

  "MedicalBillsB,"

  "MedicalOtherB,"

  "EntertainmentB,"

  "VacationB,"

  "DebtCarB,"

  "DebtStudentLoan1B,"

  "DebtStudentLoan2B,"

  "DebtStudentLoan3B,"

  "DebtCreditB,"

  "DebtOther1B,"

  'DebtOther2B '.

  ];

  Subtract the values in field

  for (var i = 0; i)< afieldstosubtract.length,="" i="" +="1)">

  v1-= + getField(aFieldsToSubtract[i]).value;

  }

  Set this field value by rounding the result to the nearest

  Event.Value = util.printf ("%.2f", v1);

  Do not think of this as a band-aid, think the correct way to perform the calculation, because it is. Note that "Thithes" may be a spelling error.

• Can't see the value of the disabled item

  Hello - I have a few DML that uses the value of the item to a page in the WHERE clause. When the page element is activated, the DML works
  perfectly. When she's not on, nothing happens. I'm sure that the value of page element is not being 'seen' by the pl/sql
  code. I know that I had similar problems with hidden objects... I don't know how to handle this case.
  
  I updated program elements the use of disabled
  
  document.getElementById("PX_ITEM").disabled = true;
  
  And I have the reference point the PL/SQL simply grace: PX_ITEM. (I get
  "and execute a DML statement).
  
  How can I access the value of the element - with this option off, or by
  using a different method to prevent users from changing the value of the element?
  
  Thank you
  C

  To somehow reactivate it in conjunction with the key-press and this confirmation?

  Try

  javascript:document.getElementById('PX_ITEM').disabled = false; apex.confirm('Commit all changes ... ?', 'SAVE');
  

  Published by: fac586 on December 30, 2010 16:06

  Citations fixed as described below.

• See the value of all the 10 seconds

  Hello

  I am trying to create a movement I am average for information collection. I managed to implement the movingaverage.vi in my program, but now I want to display the actual value on the front panel, but only once every two seconds (at the moment that I'm collecting data several times per second and it's too fast to read on the front panel). Is there an easy way to do this?

  Thank you

  Place the indicator inside the true case of a case structure and settle the case true once every 10 seconds.