my xp pro cd key will not activate my windows__

Similar Questions

• Format and Reinstall, product key will not activate

  Hi, I'm using Vista Home Basic, and I happily did so since 2008.  Every few months, I blow hard and do a fresh install, and each time, it was very good.  This time, however, he told me the product key is already in use and will not activate it.  It's the only key I've ever had, and it's the only machine that I use it on.

  How can I get around this?

  Thanks in advance,

  Matt

  Use phone activation

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

  In the future, you can consider making an image of your active system and restore that, rather than to re - activate each time.

• Windows 7 key will not activate

  I ordered a new PC from iBuyPower to August.  The machine had many problems and had to be sent in for repair 3 times due to hardware failures and has been formatted or hard drives replaced all 3 times.  Now, my Windows product key will activate not on my machine after the more recent repairs.  How can I get my windows to activate?

  Code:
  0xC004C008
  Description: The Activation server determined that the specified product key cannot be used.
  Thank you!
  D
  Edit: Already talked to the technician of the IBP, he said I should ask for tier 2 support or I would be sent to the manufacturer.

  Try the phone activation, if that does not work, then run the diaganostic utility at the end of this post.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Alternatives:

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

• DC subscription and the product under the same ID-based key will not activate

  We have an umbrella account that has 50 + XI Standard and Pro standalone key on it. It also has a Pro XI subscription. Worked well until the DC line was introduced. We have a subscription Standard DC which also worked well, but now we must make more independent products STD and we run by activating them because they oppose the subscription to DC problems by telling us that it is already activated on both machines, apart from the fact that we used the serial number for installation and verification must go against this series. I managed to get a working account multiple-time install/test/CCCleaner/fake Adobe until he took once, but it won't. I have to get 5 more and it will be a huge pain to make me consider alternatives to acrobat. Is there a way to solve this is by moving the subscription to another account (deal with it when they fail to work down the road) or fixing the back-end for activations to actually work. Or an installer that does not use CC account? If there is a problem, the system should prevent us to buy several of these the same account.

  Tomas,

  Please contact our support team using the following link, contact customer service .

  Kind regards

  Guinot

• Windows 7 will not activate with the OEM key, after the failure of HARD drive.

  Hello

  I was recently asked to repair my brother DELL laptop.  The HARD drive failed and the system unusable.  I replaced the HARD drive and installed Windows 7 Home Premium x 64 (earlier version of windows) from my own installation media.  The recovery partition had survived the failure of HARD drive, I would have just cloned that and used, but this was not an option in this case.

  The problem that I am experiencing, is that windows don't will not activate, saying that the key is not valid.  I was told that installing Windows 7 media would work with a retail or an OEM key, but that doesn't seem to be the case.  The key OEM I use, is from the computer it came from originally, and the only material change is the new HARD disk.

  I try to avoid ordering an OEM Dell installation CD, as which costs money (I already have my own installation CD) and takes time (why do they have them available for download?).

  Any help would be greatly appreciated!

  Thank you

  Brian o '

  Here is the information that the Microsoft Genuine Advantage Diagnostic Tool spits out:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {AC8177E3-D2B0-45ED-B79B-E129894262D3} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130104 - 1431
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {AC8177E3-D2B0-45ED-B79B-E129894262D3}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-1225630707-1574482703-4192685535Dell Inc.. Inspiron N5030 Dell Inc.. A02 20100913000000.000000 + 00032933F07018400F804090409Time(GMT-05:00) Standard is03DELL WN09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0892013
  Installation ID: 004806170012218410865063155553272544088463952332351022
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: initial grace period
  Time remaining: 43080 minute (s) on (29 day (s))
  Remaining Windows rearm count: 3
  Trust time: 31/03/2013-02:23:35

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MAAAAAEAAgABAAIAAAABAAAAAgABAAEAeqgI7yp8en9YkLIC/j7Shg44gAGAPUbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL WN09
  FACP DELL WN09
  HPET DELL WN09
  MCFG DELL WN09
  WN09 DELL SLIC
  OSFR DELL WN09
  SSDT PmRef CpuPm

  you use an OEM SLP key that only works with the manufacturers recovery media.

  change the product key to that on computers of COA
  Click Start, type slui3, press ENTER.

  Additional information:

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  COA SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• XP Pro SP3 programs fax everything works except will not activate the modem.

  All the routines of fax machine worked correctly in the past, BUT without warning (which was checked and working properly) the modem is more will not activate when the fax software is responsible for sending the message.  I was not able to find hardware problems and even after removing and reinstalling the MS fax routines the modem will not activate.  Would appreciate any ideas about the solution.  Thank you.

  It is probably not the modem firmware, although it could be that the modem driver is corrupted.  In both cases, however, a visit to the site of the manufacturer of the modem is in order.

  Exactly how did you determine that the modem is working properly?
  Have you looked in the Device Manager?
  Have you used the 'button interrogate modem' tab of the property sheet for the modem ' Diagnostic'?
  Have you tested a data connection using HyperTerminal?  If you do not know the phone number of a "Bulletin Board" (apparently some of these still exist) or the IP address of a server telnet, just to open HyperTerminal and see if you can dial any phone other than the line number to which your modem is connected.

  Thank you for your understanding, PML.  I had used all of the tools you mentioned EXCEPT try another modem program!  HyperTerminal doesn't activate the modem, the feature has been confirmed.  I also had a problem with the new creation of file and folder (program installs, etc) setting not permissions to a level of total control of my identifying specifically used (Admin level) which, of course, can cause certain issused orders either by keyboard or input to fail (often with no indication of the cause of failure) program.  Realizing that this situation might be involved with the problem of the fax modem that I started to study the folders and files that are used by the routines of MS Fax.  A lot of the files/folders did not the permissions defined by giving total control of my ID so I adjusted the.  The modem is now triggered by the routine of fax!  Thanks for making me think a bit out of the box (at least my usual box) and providing the index (another modem using program to test the feature running) problems.

  Now if I can only figure out why (or what has changed in my system) which causes the folder/file creation process in Blons class "Admin" from my user and privileges not setting high enough!  GG

• I have a win 7 pro SP1 OEM installed on my PC, windows 10 will not activate.

  Get the OxC004C003 error message? Any ideas?

  Thanks Bill

  Did you actually follow the prescriptions and begin the upgrade to Windows 7?

  If this isn't the case, then you will never have a proper key.

  Windows 7 key will NOT work on Windows 10.

• Reinstalled Windows 7 Home Premium because it was slow, now it will not activate and product key on the label is unreadable

  I'm reinstalling Windows 7 Home Premium on my Acer laptop as it was slow, now it will not activate. Done this before on another acer and worked perfectly, I did a clean install on both. Help

  You will need to buy an Acer restore disk and allows to reinstall Windows 7 Home Premium:

  Please see: Acer Recovery Media purchase program

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

• Portege z30-b-14z 10 Pro 64 bit will not be in hibernation

  Dear all,

  My new Portege z30-b-14z 10 Pro 64 bit will not be in hibernation.

  I can not hibernate through the following methods:
  1. click on 'Start', 'power', 'Hibernate '.
  2. press x and windows, click on 'Close or disconnect', click on 'standby '.
  3 a prompt as administrator and type "powercfg/h on" and then press ENTER to activate the Hibernate mode, then type "shutdown/h/t 0".

  Yet once, nothing works. I want to really just close the lid of my laptop and have hibernate.

  Well want to can someone help?

  See you soon,.
  Bender22

  Dear all,

  There has been no response. This is my 2nd Portege for work and I can't go to the Hibernate in Windows or Ubuntu. What gives? I have this job and must close and run meetings with out having to stop and shut down all my programs that I have running. I need this laptop to Hibernate.

  I also have a DynaBook (of Japan) and the R830 running current House to run Win 7 64 - bit professional. They cannot Hibernate or the other.

  Can anyone help, because Toshiba cannot.

  See you soon,.
  Bender22

• HP 2113w 19: windows 8.1 not will not activate on HP19-2113w after update system.

  Everything worked fine on my PC.  Then the other day, he crashed and said there is a disk error and to analyze the entire disk to find the error. He finished scanning, but windows 8.1 would charge not successfully.  This is why I made an update of the system through HP recovery.  After having done that, windows should start normally, but I lost my activation.  When I tried to activate the answer has been ' key does not work try again later "or something like that.  Kept by train, no luck.  I thought it might have been an error with the update system, so I did the total system reset (after registration of personal data).  Now, I have the same problem with the activation and if I try to navigate in the normal way to activating the screen, the screen disappears.  I can get to the activation by using the command line.   but the key still does not work.  The key that I use I extract from my BIOS data.  Also, I ran the update and reset to the original hard disk partition.

  I hope someone has a solution to this.  Thanks advanced

  Bill

  Hello @beekster,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your desktop computer will not activate after a system refresh, and I would be happy to help you in this case!

  To fix this problem, I suggest following the procedure described in this resource on the activation of Windows 8 product, which should help to activate Windows 8.1 on your system.

  Please re-post with the results of your troubleshooting, and I look forward to your response!

  Concerning

• Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  Windows vista home basic original dics32bit sp1 product key will not work say code invalid disc P/N N353G

  I reinstalled my windows vista.made a clean install removed windows xp sp3 when I try to activate my windows vista Home Basic sp1 it say not validates the code supplied with the disc, the code is below my laptop and the cd is in the package with my laptop, I used the key once when I re-installed my operating system once and it worked perfectly

  If you get this message before you try to turn it on, it means generally that you must not read or wrong entered the key.

  Use a magnifying glass and a bright light to read the key (or ask someone else to read it for you)

  In particular check the characters B/8 and G/C/Q.

• Samsung Ativ 500t will not activate windows.

  Today I bought the Ativ 500 t and windows will not activate until it does I cannot use most of the features of the tablet. Someone please help me with this problem. I tried the site but there is no recourse.

  Have you tried to phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• OK, I changed my hard reversing in car and the windows don't will not activate because of it, how or who should I call to fix this *... once again!

  OK, I changed my hard reversing in car and the windows don't will not activate because of it, how or who should I call to fix this *... once again!

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------

• Tablet Lenovo suddenly will not activate windows or accept a microsoft account that has been registered in.

  I'm having a hard time to get back to a windows device.  I have a Lenovo tablet which has a Windows8 full version on it.  I have not used in a few months and went to use it the other day.  It does not connect to my account a single drive then it does not recognize the microsoft account which was signed in, and then it would not turn on the windows account.  I restored and still will not activate.  I can't get any phone support which is very frustrating.  Please help me understand what is happening.  It worked months ago but now I want to upgrade to 10 and use it, but it's useless if she won't turn on.

  You can check the product key Windows 8 embedded by installing and running ProduKey.  It will be displayed as a key OEM BIOS which can be separated from the default key of Windows 8 as shown.

  When you know for sure this key exists, you can Install Clean Windows 10 Upgrade skip the product key during the installation, and then activate directly with windows 8 product key embedded as explained in the FAQ 1511 Version activation in Windows 10 .

  This will be a facility infinitely better and save a lot of time struggling with the activation of Windows 8, then move again to Windows 8.1 in order to lower quality 10 Windows upgrade.

• iMessage iOS 10.0.2 will not activate.

  I am on iOS 10.0.2. I woke up today to more than 10 messages sent to random numbers from my iPhone. He said that a mac then sent I changed my password to ID of cloud. While this is no longer my iMessage works and will not activate. I have restarted my phone several times, used a new ID, the time iCould fixed parameters online and nothing worked for my iMessage activate. What will be

  In this case, it is best to Contact Apple for support and service - Apple Support