Segment Advisor do not, run trips to PLANNED

Similar Questions

• the cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  The cursor is jerky and plans for 2004 flight simulator do not run smooth. This only happens when you run games. Is there a solution?

  Hello

  · What is the number and model of the mouse?

  · Will there be any changes made on the computer before the show?

  You can follow the steps listed in the link below: how to solve the pointer display problems mouse in Microsoft games: http://support.microsoft.com/kb/309703

• 11g segment Advisor

  I recently activated Segment Advisor in my 11 GR 2 Exadata database (automated maintenance tasks have been disabled when we first went live).
  
  I have it running for 3.5 hours per night at the moment. Of course, it is not enough to complete the analysis of a data base of 22Tb in a single night, but my question is if it will continue where he was arrested the previous night or if she will try to start from the beginning.
  
  It is running about five times so far, but has only analyzed a tablespace. I think I'm being unusually impatient and it of just to take a moment to get through a tablespace, but worry that he will be stuck analyzing the same part of the database never without my intervention...

  Hello

  I have it running for 3.5 hours a night at the moment. Obviously, this is not enough to complete analysis of a 22Tb database in one night, but my question is whether it will continue where it was stopped the previous night or whether it will attempt to start again at the beginning. 
  

  It is not analyze all database objects. Can you please check this auto Segment in "http://docs.oracle.com/cd/E11882_01/server.112/e10595/schema003.htm".

  Thank you
  Baskar.l

• Windows 7 Upgrade Advisor does not work on my Windows XP Professional

  Windows 7 Upgrade Advisor does not work on my laptop Windows XP Professional Version 2002 SP3 (Panasonic-CF-30). Is there a reason why?

  One thing that can stop him to run the .net framework.  Please ensure that the latest version is installed.

• Windows update error: Windows cannot currently check the updates because the service is not running

  Original title: Windows Update No. Longer - Vista business functions

  Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

  I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

  Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

  Thanks in advance,

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus software is installed on your computer?

  Follow these methods.

  Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2: How to reset the Windows Update components?
   http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

  Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

  I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

  At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

  Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

  At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

  However, the update message that a new version would be dl before I could go any further. So I did it.

  When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

  Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

  Thank you!

• Error message "Windows can't open add printer." The local print spooler service is not running. Please restat the spooler or restart the machine. "while trying to add printers in Windows 7

  Original title: my laptop has lost all printers and windows & no longer recognizes them. Help! I can't print anything

  I use my laptop computer in a docking station.  I took it out to take for a trip and when I got home I plugged it back (as I always do).  Just before the trip, I have upgraded to Windows 7 and all my printers were working very well.  When I got home and pluged again, Windows does not recognize one of my printers.  When I try to add printers a say8ing error message "Windows can't open add printer."  The local print spooler service is not running.  Please restat the spooler or restart the machine. "I tried to restart and turn off the printer, etc.  Can someone help me?

  Hi RobynGP,
   
  This may occur if the print spooler requires other services, and these services are not running. To resolve this issue, follow these steps:
   
  1. in Services, right-click on print spooler and then click Properties.
  
  2. click the Dependencies tab. The first box list all system services that must work for the print spooler start. These are dependencies.
  
  3 make a note of each service, click OK, and restart each service on which the print spooler is dependent, if the service is not already started. If a service is not started, right-click, click Properties, and then make sure that the startup type is automatic.
   
  Let us know if this helped.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• enabled automatic optimizer stats collection, but is not running and not appearing not

  enabled automatic optimizer stats collection, but is not running and not appearing not
  
  I've activated automatic optimizer stats collection days ago, but it never worked. DB version is 11 GR 2, OS redhat 5. It shows active in dba_autotask_client, but not in autotask_task. Please help on this issue.
  
  SQL > select client_name, State of dba_autotask_client;
  
  CLIENT_NAME STATUS
  --------
  ACTIVE automatic optimizer stats collection
  advise OFF auto space
  SQL tuning advisor ENABLED
  
  SQL > select TaskName, status, to_char (last_good_date, ' ' YYYY-MM-DD HH24:MI:SS) last_good_date, last_good_duration
  of dba_autotask_task
  where client_name = "auto optimizer stats collection"; 2 3
  
  no selected line
  
  SQL > select program_action, number_of_arguments, active
  of dba_scheduler_programs
  where owner = 'SYS '.
  and program_name = 'GATHER_STATS_PROG '; 2 3 4
  
  PROGRAM_ACTION NUMBER_OF_ARGUMENTS ENABL
  
  DBMS_STATS.gather_database_stats_job_proc 0 TRUE
  
  SQL > select w.window_name, c.autotask_status, c.optimizer_stats, w.repeat_interval, w.enabled
  -, w.duration, w.last_start_date, w.next_start_date
  dba_autotask_window_clients 2 c, dba_scheduler_windows w
  3 where 4 c.window_name = w.window_name
  5 order by last_start_date desc;
  
  WINDOW_NAME AUTOTASK OPTIMIZE ITS REPEAT_INTERVAL
  
  MONDAY_WINDOW ON ON freq = all days; byday = MY. byhour = 22; byminute = 0; BYSECOND = 0 TRUE
  SUNDAY_WINDOW ON ON freq = all days; byday = Sun; byhour = 6; byminute = 0; BYSECOND = 0 TRUE
  SATURDAY_WINDOW ON ON freq = all days; byday = SAT; byhour = 6; byminute = 0; BYSECOND = 0 TRUE
  FRIDAY_WINDOW ON ON freq = all days; byday = FRI; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
  THURSDAY_WINDOW ON ON freq = all days; byday = THU; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
  WEDNESDAY_WINDOW ON ON freq = all days; byday = SEA; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
  TUESDAY_WINDOW ON ON freq = all days; byday = KILL; byhour = 22; byminute = 0; BYSECOND = 0 TRUE
  
  7 selected lines.
  
  SQL >

  Select max (last_analyzed) from all_tables;

  display SQL results above

• Concurrent program is not running in parallel

  Hello
  
  There is a simultaneous custom program that must be run in order, sometimes and sometimes it should be able to run in parallel. The program was defined initially to be incompatible with itself and it is used to run only in sequence, as planned, but when the incompatibility with the self has been deleted or disabled can still, he runs in the order but does not run in parallel. What could be the reason?
  
  As a temporary solution, I tried to remove the simultaneous program and recreate and defined without any inconsistency and it works in parallel. But it won't help the incompatibility could be switched on/off often enough and recreate the simultaneous program every time is not a good idea.
  
  Thanks in advance.
  
  Kind regards
  RAM

  There is a simultaneous custom program that must be run in order, sometimes and sometimes it should be able to run in parallel. The program was defined initially to be incompatible with itself and it is used to run only in sequence, as planned, but when the incompatibility with the self has been deleted or disabled can still, he runs in the order but does not run in parallel. What could be the reason?

  The CM has been revived after doing the above?

  As a temporary solution, I tried to remove the simultaneous program and recreate and defined without any inconsistency and it works in parallel. But it won't help the incompatibility could be switched on/off often enough and recreate the simultaneous program every time is not a good idea.

  Whenever you toggle incompatibilities, please make sure that you bounce the CM.

  Establish rules of incompatibility for Custom Reports [107224.1 ID]

  Thank you
  Hussein

• LOGFF triger does not run when customers end abnormally

  Here's a triger to logoff:
  
  create or replace TRIGGER scott.before_logoff_trg
  before logoff ON database
  declare
  ......
  
  If customers come out normally, it is executed (just delete some rows in a table). But if the customers is crushed, the triger will not run.
  
  Is there a way I can run code pl/sql, when a client log normal or abnormal?

  BluShadow wrote:

  EdStevens wrote:

  Antares wrote:
  Thanks for your response!

  I'm working on an application for the edition of map of GIS, which should allow several users to edit the same map. Client A and B change the different parts of the map, but that they would like to see the result of the other. Change operations are stored which will be inserted in the staging table. When a customer edit, he must choose to save or ignore for this time editing operations. If he has abandon the changes, it has no impact on others, because these changes are useful for others, but not very important.

  No effect? Unless Customer B made a decision based on what he saw of A, make a change based on what he saw of A, so he saw has went, destroy the basis of its decision and action...

  Well Yes, as I said above...

  Which suggests that client B can act on something that is not yet truly engaged in the process of the company. This sounds like a serious gap in the business process and therefore the database design.

  Yes, it seems that the question should the cropping - how to allow collaborative editing of GIS data within maps that allows changes to be resistant and modified before to be published?

  This sounds like the O/P is in need of a kind of shared workspace that can be superimposed on an existing map changes without making public changes. The workspace must be shared between multiple users at the same time. Turns in the workspace would be committed and those changes, once accepted (and closed maybe?) must be published in the underlying plan so that everyone can see. If they are not published, they remain in the workspace.

  The idea of catering to an abnormal termination seems largely unnecessary if there is a concept of workspace. If a user ends abnormally, when they reconnect, they may choose to reuse the existing workspace or create a new. The old workspaces that have not been touched for x time could be archived or purged.

  This does not seem withdrawn too far from what the op said here...

  Change operations are stored which will be inserted in the intermediate table

  He thinks that it is mainly a question of changing the process...

  Published by: Bravid on March 7, 2012 15:49

• Ibots does not run

  Hi all
  
  I have eight Ibots which are provided for each group as the destination, but the Ibots are not executed as expected.
  
  We use LDAP authentication and user DB table. I have THE system configured to user delivery profiles.
  
  IBot parameters:
  
  Priority: normal
  Visibility of data: custom
  Beneficiaries: A particular group
  Destinations of the user: interactive dashboards (verified)
  Active delivery profiles (ticked)
  Of specific features: Email (checked)
  
  IBot LOG:
  
  +++ ThreadID: 6 b 0: 07:24:35.944 2010-09-11
  ------------------------------------------------------------------------------
  iBot chain began.
  Planner iBot Version: 201
  Job ID: 22
  Instance ID: 855.000000
  User ID: admin
  Parameters:
  Version of employment: 2
  IBot ID root: / shared/_ibots/By Geo up to date
  Oracle BI Presentation Server: localhost:9710
  Debug: true
  iBot active Load Balancing.
  
  
  +++ ThreadID: 6 b 0: 07:24:35.991 2010-09-11
  Using Presentation Server: localhost:9710
  
  
  +++ ThreadID: 6 b 0: 07:24:36.069 2010-09-11
  ----------------------------------------
  iBot Started:
  iBotID: / shared/_ibots/By Geo up to date
  Priority: normal
  Custom: true
  
  
  +++ ThreadID: 6 b 0: 07:24:36.069 2010-09-11
  Subscribers: 0
  
  +++ ThreadID: 6 b 0: 07:24:36.069 2010-09-11
  iBotID: / shared/_ibots/By Geo up to date
  No subscribers. Do not run.
  
  +++ ThreadID: 6 b 0: 07:24:36.069 2010-09-11
  iBot finished string.
  ------------------------------------------------------------------------------
  
  The main problem is when I'm planning an ibot to a particular user or usergroup ibot is executed and email sent successfully, but when I choose a 'group' (web groups) in recipient ibot is not executed.
  
  Please help me gurus...!
  
  Thanks in advance... !!
  
  Kanna

  It is an old thing that no longer works since the 10.1.3.3 release. Check the link I give you again and see how it send email using the feature to "determine the recipients of conditional query.

  In two seconds, you must create a system of SA with a single user in the table and add a group table in your design to be able to do all the possibilities. Create a report with the Group and email to set the recipients and use the feature to "determine the recipients of conditional query.

  Success
  Nico

• Why is this work not running?

  Why is this work not running?
  

  SQL> BEGIN
    2  DBMS_SCHEDULER.RUN_JOB('EXCHANGE_PART_JOB');
    3  END;
    4  /
  BEGIN
  *
  Error in line 1:
  ORA-00911: invalid character.
  ORA-06512: in "SYS.DBMS_ISCHED", line 150
  ORA-06512: in "SYS.DBMS_SCHEDULER", line 441
  ORA-06512: in line 2

  This work follow these steps:

  CREATE OR REPLACE PROCEDURE Exchange_Partition IS
  Sql_Exchange VARCHAR2(2000);
  BEGIN
  Sql_Exchange := 'ALTER TABLE HR.GPS_LOG_HIS EXCHANGE PARTITION '||
  'udp_part'||TO_CHAR(SYSDATE-1/24,'YYYYMMDDHH24')
  ||' WITH TABLE HR.GPS_LOG';  
  EXECUTE IMMEDIATE Sql_Exchange;
  END;
  /

  Use the following program:

  BEGIN
    DBMS_SCHEDULER.create_program (
      program_name        => 'exchange_part_prog',
      program_type        => 'STORED_PROCEDURE',
      program_action      => 'EXCHANGE_PARTITION',
      --Use a database directory to replace the OS directory.
      number_of_arguments => 0,
      enabled             => TRUE,
       comments            => 'Program to exchange partitions for hr.gps_log_his table or other tables
                               use a shell script.');
  END;
  /

  Use the following code to create the work:

  BEGIN
    DBMS_SCHEDULER.create_job (
      job_name      => 'exchange_part_job',
      program_name  => 'exchange_part_prog',
      schedule_name => 'exchange_part_hourly_schedule',
      enabled       => TRUE,
      auto_drop     => false,
      comments      => 'Job defined to exchange partitions for gps_log_his table or orhter tables.');
  END;
  /

  Ok

  ORA-14099: all rows in the table are not eligible for the specified partition
  Cause: There is at least one line in the non-partitioned table which does not qualify for the partition specified in the PARTITION of EXCHANGE ALTER TABLE
  Action: Ensure that all the lines in the segment qualify for the partition. Perform the operation table alter with the NO CHECK option. Run ANALYZE table VALIDATE on that partition, namely the invalid rows and delete them.

  I think you should check the data in gps_log, some lines must belog to another partition?

  Concerning
  Peter

• Purchase Apple Store app will not run. It keeps freezing at the top. Help please what I do

  I bought an app and the application will not run. It keeps freezing at the top. He asks me on a plus to enter info Apple then he said I bought it but will not open the app

  Delete the app first, only then it re-download again.

  If not, try these standard troubleshooting steps.

  Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

  If your backup in iTunes, make sure that it is an encrypted backup.

• Updated to the latest version. Now that firefox is not running.

  dated firefox now firefox will not run.
  Have to use the dreaded IE for that matter.

  The point on the issue. Need to do a restart and FIrefox now works. GO figure. Problem solved.

• Applications are not running correctly

  I installed the iOS Update 9 and therefore count my applications do not run the way they were accustomed to, something fishy is going on in the back end, I guess. If anyone has an idea about this then please let me know. I need your help

  Hi Shayadri!

  I understand that your applications do not work properly after installing iOS 9.  I understand how important it is to have your apps working correctly, and I am pleased to offer you some advice.  Please try all the tips in this article to support, and if you're still having problems with third-party applications, you will see instructions to contact the developer of the application of aid.

  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Thank you for using communities of Apple Support.

  See you soon!

• I have the latest version of Java and the addin card is not there. I have a mac. I'm not running on 32-bit. I had so many problems with this new java updat

  I have updated java 7 up to 45 (by mistake, this version of java does not work with vpn and according to apple, I can't revert to the previous version). The applet plugin does not appear in my Add ons. I'm not running 32-bit. I have read and tried every article I can find. I uninstalled and reinstalled still no luck. I have an iMac, just put update to maverick.

  See if anything here is useful:

  • http://KB.mozillazine.org/Java#If_the_Java_plugin_does_not_appear_in_the_Add-ons_Manager_even_though_Java_is_installed