Segments of straight lines do not align with grid

Similar Questions

• Subcircuit pines are not aligned with grid and does not connect

  I have two symbols the same sub-channel.  One is fine, but the other has pins which are not line up with the grid of MS and who does not yet connect.  MS12.0.0.

  This one is very good:

  

  The pins are off-grid.  The circle will not connect.

  

  Hello

  I did experiment a little with this. One thing you can try is to open the symbol Editor, select the axis that does not connect and then the spreadsheet view, change the shape of pine of length zero. Then try and see if you can connect to the PIN in the design. It will not appear as a line, but you should still be able to connect to it.

  If this does not work, you can open a service request and we can try to see how to solve the problem.

  I hope this helps.

• O2 iPhone 5 s phone line does not work with my map of Cyprus turkcell

  O2 iPhone 5 s phone line does not work with my map of Cyprus turkcell

  Yalcin davrandi wrote:

  O2 iPhone 5 s phone line does not work with my map of Cyprus turkcell

  OK, if the phone has been implemented using the o2 network and you want to use it with another carrier, you need to get o2 to unlock your phone.

• Chronology of lag, line read head not aligned with the playhead after 8.1 update!

  Everyone knows this? See attached screenshot. The white line clings around the time indicator resulting in what you see below, in addition, the read head line is not actually bordered the read head himself, make changes the picture quite impossible! It drives me crazy. Have cleared all caches and deleted all the files preview, even though this is clearly not cause this. It seems to be a problem of card/graphic driver with PP 8.1 that everything worked great until I applied the update this morning... silly me :-/ I'm running a Windows 7 Pro 64 bit, workstation 24 core with 64 GB of RAM and a Quadro 5000 GPU with 2 GB of RAM. Help!

  

  Hi Mark Mapes and GarethCLS. I found out what the problem was/is here! It was because my Windows system fonts have been fixed at a size of 125%. I changed the size of the font to 100% in Windows and hey presto everything works as it should now in this regard, no line of collage and the read head and the line are aligned correctly. It wasn't a problem before the update by 2014 CC as I had my fonts to 125% for the years! Now I'm squinting at my text that I have to keep it at 100% for the PP is displayed correctly! Please my op for details before you ask Mark Mapes. Stabilizing warp will not apply to one of the clips on the timeline or change it back between the GPU acceleration and software makes no difference, it's just the size of the police who made this place.

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• precision not align with excel calculation

  

  my original question was

  How would I do an average of an array of

  index 100 to 300?

  If I have an array of indices of 2000,

  How can I get an average of 100 to 300?

  in

  Excel it would be

  = AVG(C100:C300)

  I did the same method in labview but my numbers aren't right.

  I think that my framework does not go with the precision of the format?

  You also set the wrong lines.

  In LabVIEW, you give the starting index, number of elements. (you seem to have the end index and not the number of elements of wire!)

• Image not aligned with borders on the site

  I apologize for my badly phrased explanation, I'm not 100% sure how to explain my problem.

  Done on my master page I want to add my logo on the upper right. However, it does not fit the dimensions of the screen. What I am doing wrong?

  Here are the screenshots to explain my problem.

  1. the image seems to be aligned on my site.

  

  
  2. the image is not aligned, as shown on the preview.

  

  
  3. I drag the image far to the left so that it is not aligned on my screen.

  

  
  4. the image is aligned with the corner on my preview, even if she looks way off on my screen.

  

  What should I do to make my images are aligned on the screen and the Preview?

  1. Create a zone of the height of the logo, but the width of the screen.
  2. Use the 100% width button to make sure that you extend the box to fit the screen. (see the screenshot of the first)
  3. Check the box and in the menu fill import your logo. (setting the justification for left/middle, see second screenshot)

  

  

• Can I extend the horizontal slide show in a straight line but not full page from top to bottom?

  Can I extend the horizontal slideshow in a straight line on the page from start to finish, but not full page up and down?

  Hello

  Please check these videos to help:

  https://www.YouTube.com/watch?v=BDgERSf2a5k

  https://www.YouTube.com/watch?v=diUtfwFGI1w

  Thank you

  Sanjit

• Encompassing not aligned with the object

  Hi all

  I've been using Illustrator CS6 and during the transition to the 2015.3 CC I had the following problem: when I create an object, it's bounding box does not align, it is impossible to turn the object easily. I suspected, I just pressed accidentally a few keyboard shortcuts, but reset settings and even move the file didn't help. I looked all over the forums, but it seems that only a few people experience the same problem, and their questions remain unanswered I will be very grateful for any advice how to solve this problem, because I come to CS6 because of this problem. Thank you very much!

  

  Object > shape > expand shape

  Context menu click object > transform > reset Bounding box

• Hi - I am trying to draw an irregular shape (series of straight lines) and fill it with the color... How can I do this?

  I need to draw a shape irregular, closed, which is a series of joined lines and fill it with the color, etc., I can only see square, polygon, etc...

  Any suggestions?

  You can set the polygon tool to 3 sides, or use the pen tool.

• PHP form labels do not align with checkbox

  Help!

  I can't get my labels on my registration form to align with the boxes down.  This form is online at www.thectkgroup.com/signup

  Thank you!

  Add the following code at the end of screen.css

  #newsletter .formpart input [type = "checkbox"] {}

  Width: 150px;

  }

• Floating images do not align with text

  I am rebuilding an old site with CSS. I noticed that my floating images left don't line up quite with the text (at least in Firefox). The left side of the image is one or two pixels right there where the content begins. Can't understand why. Here is a link, in case someone has a diagnosis...

  http://www.keithpurtell.com/kthings/body_gway.htm

  In fact, his .floatL style contains the float and the right margin, as long as this class is on the div that at - he added. Remember, this is a selector with several classes in she asked a div.

  The error is mine. Let the img out of the div tag The img in question is the actual image that is contained in the div. You don't want the image to float, you want the div (more legend!) to float.

  / * for images * /.

  {.floatL}

  float: left;

  margin: 0px 10px 0px 0px;

  padding: 0;

  }

  Make sure that you have closed the div BEFORE starts the text so that the text is not included in the floating div, but flows upward to the right.

  I reclassified the div (class of second on it...) like Hat of legend. Less confusion.

  . floatL.cap {

  do-family: Arial, Helvetica, without serif.

  font-size: .65em;

  make-style: normal;

  do-variant: normal;

  make-weight: lighter;

  color: #666;

  text-align: left;

  }

  
  

  Image copyright by Olan Mills Studios

  

  It worked for me, as you can see...

  Beth

• Simple straight line does not work

  Hello

  I leaned on AS3 code to:

  http://www.republicofcode.com/Tutorials/Flash/as3drawvectors/

  Near the top of this page, the author gives this very minimal code to draw

  a red line. The code is below:

  var my_shape:Shape = new Shape();
  addChild (my_shape);

  my_shape. Graphics.LineStyle (1, 0xFF0000, 1);
  my_shape. Graphics.MoveTo (50, 50);
  my_shape. Graphics.LineTo (100, 50);

  I pasted the code above in the Panel (frame 1) actions in

  a new flash document and I get 4 errors

  rather than a straight red.

  Anyone know why this code does not work?

  Thank you

  Jim

  Hi Jim, check this box:

  var my_shape:Shape = new Shape();

  my_shape. Graphics.LineStyle(1,0xFF0000);
  my_shape. Graphics.MoveTo (10, 20);
  my_shape. Graphics.LineTo (stage.stageWidth - 40, stage.stageHeight - 180);
  my_shape. Graphics.endFill ();
  addChild (my_shape);

  It's a little funny to you so that can see the potential to make shapes with actionscript

  stage.stageWidth - this is the width of your paper.

  stage.stageHeight is the height

  Good luck

• Object will not align with the guide in my document.

  I'm working on a chart and eventually align parts with a guideline. And the graphics keep bouncing off the guideline to the left or to the right, up and down as I drag the object to the guides. I use Illustrator CC14 on a Macbook with OS X 10.9.2.  Not sure if you prefer that I have to turn on or off. I turned off the snap to point and snap to grid. Help. Thanks in advance.

  IvyLeaf,

  In such cases, the first assumption is aligned to the pixel grid

  You can select the entire document and untick finally align on the pixel grid in the transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.