Chronology of lag, line read head not aligned with the playhead after 8.1 update!

Similar Questions

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• Encompassing not aligned with the object

  Hi all

  I've been using Illustrator CS6 and during the transition to the 2015.3 CC I had the following problem: when I create an object, it's bounding box does not align, it is impossible to turn the object easily. I suspected, I just pressed accidentally a few keyboard shortcuts, but reset settings and even move the file didn't help. I looked all over the forums, but it seems that only a few people experience the same problem, and their questions remain unanswered I will be very grateful for any advice how to solve this problem, because I come to CS6 because of this problem. Thank you very much!

  

  Object > shape > expand shape

  Context menu click object > transform > reset Bounding box

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.

• Object will not align with the guide in my document.

  I'm working on a chart and eventually align parts with a guideline. And the graphics keep bouncing off the guideline to the left or to the right, up and down as I drag the object to the guides. I use Illustrator CC14 on a Macbook with OS X 10.9.2.  Not sure if you prefer that I have to turn on or off. I turned off the snap to point and snap to grid. Help. Thanks in advance.

  IvyLeaf,

  In such cases, the first assumption is aligned to the pixel grid

  You can select the entire document and untick finally align on the pixel grid in the transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

• transformation not aligned with the object box

  Hi all

  This problem has been bothering me for a while, and especially now that I am design - small - buttons.

  The processing area control an object (here a simple rectangle) does not exactly match the object itself, as shown on the screenshot.

  

  NB: The problem seems to be the option "match race":

  The loading IS included in the dimensions of the objects. (I need to choose this option)

  Same problem when the stroke is excluded from dimensions.

  The problem does NOT occur when the accident stroke is ' outside half / half in.

  I'm using CS5

  No applied clipping mask.

  Is there a way to fix the bug?

  Otherwise I'll find a way around it and 'cheat' by using the default option.

  KatDeskat,

  The snap to grid of pixels can be disabled in the transformation Panel.

• Foxit Reader does not work with the help of laptop HP and support Guides, suggestions?

  New HP Pavilion with Windows 7 x 64 I downloaded Foxit Reader and installed and then uninstalled Adobe Reader to save space. Then, although it will open my PDF in 'My Documents', it will not open the Guides or learning PDF in HP help and Support files. Is there someone with more experience to use Foxit Reader that may suggest a work around? If I reinstall Adobe PDF then everything works again.
  John

  http://www.foxitsoftware.com/support/

• Sansa View does not synchronize with the computer after the first connection

  Hey guys,.

  I just bought a refurbished Sansa View which has the latest firmware on it. I logged on to the computer and selected "view in the folder. I downloaded some stuff and disconnected.

  Now, whenever I try to connect it again, the computer or the Sansa Connect. The Sansa start loading, but the 'Sync' screen does not appear on it. The computer shows nothing and the device does not appear in Device Manager or my computer as it did the first time. If I look through the USB devices in Device Manager I see a device using the power, but that's all.

  I tried the "MSC Mode" setting in the Sansa View settings, but it is not always connect. Don't hold.<" while="">

  I use Windows XP, SP3.

  Any help would be really appreciated,

  Thank you

  Nevermind, apparently, you need to do to reset once changed the settings in MSC mode on the player. It works fine now!

• Tables do not align at the top of the text block

  I created a series of models for our books, that require things like questions, to be placed in a line of single column table x 2. The 1st line of the table has a heading and an anchored object (icon in the margin).

  Whenever one of these tables is displayed at the top of a text frame, they do not align to the top margin, and I can't work out why. Screenshot below:

  

  The paragraph style which tables are sitting is our body text style, which is:

  9pt in 12pt, aligned to the left lane, space of 2mm after, keep all lines in paragraph together

  It is not aligned with the grid.

  Any help would be appreciated. Thank you.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  .. unless there is a way to search for 'Paintings' in find/replace with CS3! ...

  He is a. sorting undocumented (and therefore, frowned upon by those In The Know [*]), but if you enter this code

  <0016>

  in the text field on a regular basis, find will find tables in their entirety, as an inserted object. Apply a paragraph style, or just a space before, in the change field, and you're done.

  [*] And those In The Know don't know how to find tables ' "official" way Adobe this might as well do a formal code. After all, it appears on the "Special characters" PDF of Marc Autret (http://indiscripts.com/blog/public/data/idcs4-special-characters/en_InDesignCS4SpecialChar s.pdf, but largely also applies to CS3).

• Segments of straight lines do not align with grid

  Whenever I draw a straight line segment, it is not lined up on the grid, it is slightly to the left or right side of the line of the grid. (you can see on the line down to the right in the picture).  It is annoying because I can't get a bow to align properly with the segment of the line, as you can see in the picture there is a cliff on the bow where I want to align perfectly on the line segment. I have snap to grid on passing, but I tried with him off and it still does the same thing.

  I tried object-path-join with the line and the CRA chosen, but all that is move the whole arc to the left. I tried to recover the anchor points of the line and move them to the middle and I can get one end to align with the line of sight of the grid, but as soon as I move the anchor in front on the line to straighten out, all snaps back to being slightly to the left or right.

  Someone has ideas of how to do to get my path of line to be directly on the grid, so it is aligned with the CRA?

  

  Any chance you have snap to grid of pixels as well... Check the transformation Panel.

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• can read but not write in the Numbers worksheet

  Can read but not write in the worksheet Numbers on my MacBook.

  Hi Frederic,.

  This also happens if you are still in the screenshot. Is there a "Done" down button on the right?

  Quinn

• How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic.

  How can I get the read head to return to the location, it's immediately before starting playback. This used to be a preference but I don't find it in the latest version of logic. What I want to do is; Once playback is stopped the playhead returns to the previous starting position. Where is the setting for this? Is it still an option that I can find nothing in the online help.

  Hi there, don't you mean this one?

  

  Good day!

• precision not align with excel calculation

  

  my original question was

  How would I do an average of an array of

  index 100 to 300?

  If I have an array of indices of 2000,

  How can I get an average of 100 to 300?

  in

  Excel it would be

  = AVG(C100:C300)

  I did the same method in labview but my numbers aren't right.

  I think that my framework does not go with the precision of the format?

  You also set the wrong lines.

  In LabVIEW, you give the starting index, number of elements. (you seem to have the end index and not the number of elements of wire!)