Encompassing not aligned with the object

Similar Questions

• transformation not aligned with the object box

  Hi all

  This problem has been bothering me for a while, and especially now that I am design - small - buttons.

  The processing area control an object (here a simple rectangle) does not exactly match the object itself, as shown on the screenshot.

  

  NB: The problem seems to be the option "match race":

  The loading IS included in the dimensions of the objects. (I need to choose this option)

  Same problem when the stroke is excluded from dimensions.

  The problem does NOT occur when the accident stroke is ' outside half / half in.

  I'm using CS5

  No applied clipping mask.

  Is there a way to fix the bug?

  Otherwise I'll find a way around it and 'cheat' by using the default option.

  KatDeskat,

  The snap to grid of pixels can be disabled in the transformation Panel.

• Is there a reason why certain numbers automatically generated do not align with the text?

  I'm building a small book in InDesign and generated chapter numbers only display correctly aligned with the text of the chapter into two chapters. In others, they are slightly lower than the base line and print that way. They all use the same format title and list paragraph. (I even checked the Master Pages for objects that drag may interfere and see nothing.) Someone has seen this and can point me to a solution?  The original document was from the Pages converted to MS Word, so I tried to see if there are some strange characters which came with the conversion, but as you can see on the screenshot below, nothing shows up. Any help to identify the problem or a cure would be greatly appreciated.

  Here is a chapter that is displayed not correctly, and it is the base character Format options.

  

  This is the same information and display of one of only two chapters that are aligned properly.

  

  This is the same information for the works do not and the chapter number of work outlining the options for bullets and numbers.

  

  

  artomis-

  Eugene said that options 'last '. He meant the four options at the bottom of the list, but especially 'by default Figure Style'. Try "tabular covering" as Peter suggested.

  Tom

• Nested tables will not align with the primary table

  
  Hi all. Looks like I am facing another obstacle focus on the table. While I was creating one of my pages, I used nested tables to create a column on the left side of the page that will contain my menu secondary, while the other column will hold a flash element and the content of the page.
  
  Although I have inserted tables nested with a spacing of the cell '0' and '0' cell padding and Visual AIDS seem to indicate that the values in the nested table are identical with the primary table who is the holder, the nested table that will contain the film and the page content is not embedded with the table above. It seems to be off by 1-2 pixels or more, but since there will be a right on the image under the menu is quite obvious.
  
  I enclose the code for your information (line 165, 166).
  
  Thank you for your time and your suggestions. I really appreciate it.
  
  

  Saturday, September 16, 2006 15:06:50 + 0000 (UTC), "HTML-Newbie.
  wrote:

  > Discover the link http://www.fastventures.com/dev/test_temp_2col.html and you
  > see the picture under the main menu align with her on the
  > right side.

  Change this:

  
  
  
  

  To do this:

  <> SRC = "img/place_second.jpg" width = "572" height = "200" > "

  
  align = "right" >
  
  <>
  SRC = "img/place_second.jpg" width = "572" height = "200" > "
  

  Gary

• Object will not align with the guide in my document.

  I'm working on a chart and eventually align parts with a guideline. And the graphics keep bouncing off the guideline to the left or to the right, up and down as I drag the object to the guides. I use Illustrator CC14 on a Macbook with OS X 10.9.2.  Not sure if you prefer that I have to turn on or off. I turned off the snap to point and snap to grid. Help. Thanks in advance.

  IvyLeaf,

  In such cases, the first assumption is aligned to the pixel grid

  You can select the entire document and untick finally align on the pixel grid in the transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

• Chronology of lag, line read head not aligned with the playhead after 8.1 update!

  Everyone knows this? See attached screenshot. The white line clings around the time indicator resulting in what you see below, in addition, the read head line is not actually bordered the read head himself, make changes the picture quite impossible! It drives me crazy. Have cleared all caches and deleted all the files preview, even though this is clearly not cause this. It seems to be a problem of card/graphic driver with PP 8.1 that everything worked great until I applied the update this morning... silly me :-/ I'm running a Windows 7 Pro 64 bit, workstation 24 core with 64 GB of RAM and a Quadro 5000 GPU with 2 GB of RAM. Help!

  

  Hi Mark Mapes and GarethCLS. I found out what the problem was/is here! It was because my Windows system fonts have been fixed at a size of 125%. I changed the size of the font to 100% in Windows and hey presto everything works as it should now in this regard, no line of collage and the read head and the line are aligned correctly. It wasn't a problem before the update by 2014 CC as I had my fonts to 125% for the years! Now I'm squinting at my text that I have to keep it at 100% for the PP is displayed correctly! Please my op for details before you ask Mark Mapes. Stabilizing warp will not apply to one of the clips on the timeline or change it back between the GPU acceleration and software makes no difference, it's just the size of the police who made this place.

• cursor Details mode not aligned with the cursor in the image when you use adaptive wide angle

  Imported a Fuji raw image in Ps 2015 CCfrom Lr 6. The cursor is in the detail view does not point to the same place in the image. There is a lag of about 0.25 inch, regarding the image of the screen

  There was a problem with that in Camera Raw, but I'm not sure LR & PS. It happened on Windows, when the size of the default text for the operating system was not set to 100%. I thought that this problem has been fixed in the latest updates of ACR.

• Tables do not align at the top of the text block

  I created a series of models for our books, that require things like questions, to be placed in a line of single column table x 2. The 1st line of the table has a heading and an anchored object (icon in the margin).

  Whenever one of these tables is displayed at the top of a text frame, they do not align to the top margin, and I can't work out why. Screenshot below:

  

  The paragraph style which tables are sitting is our body text style, which is:

  9pt in 12pt, aligned to the left lane, space of 2mm after, keep all lines in paragraph together

  It is not aligned with the grid.

  Any help would be appreciated. Thank you.

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  .. unless there is a way to search for 'Paintings' in find/replace with CS3! ...

  He is a. sorting undocumented (and therefore, frowned upon by those In The Know [*]), but if you enter this code

  <0016>

  in the text field on a regular basis, find will find tables in their entirety, as an inserted object. Apply a paragraph style, or just a space before, in the change field, and you're done.

  [*] And those In The Know don't know how to find tables ' "official" way Adobe this might as well do a formal code. After all, it appears on the "Special characters" PDF of Marc Autret (http://indiscripts.com/blog/public/data/idcs4-special-characters/en_InDesignCS4SpecialChar s.pdf, but largely also applies to CS3).

• Image not aligned with borders on the site

  I apologize for my badly phrased explanation, I'm not 100% sure how to explain my problem.

  Done on my master page I want to add my logo on the upper right. However, it does not fit the dimensions of the screen. What I am doing wrong?

  Here are the screenshots to explain my problem.

  1. the image seems to be aligned on my site.

  

  
  2. the image is not aligned, as shown on the preview.

  

  
  3. I drag the image far to the left so that it is not aligned on my screen.

  

  
  4. the image is aligned with the corner on my preview, even if she looks way off on my screen.

  

  What should I do to make my images are aligned on the screen and the Preview?

  1. Create a zone of the height of the logo, but the width of the screen.
  2. Use the 100% width button to make sure that you extend the box to fit the screen. (see the screenshot of the first)
  3. Check the box and in the menu fill import your logo. (setting the justification for left/middle, see second screenshot)

  

  

• Help please: CloneVM_Task is created but will fail with: operation not supported on the object

  Someone Please help with this, I'm breaking my head with this for 5 hours now.

  I submit, in CloneVM_Task with the following XML (which returns a task id back http://i.e. the application has been accepted in this format):

  & lt; CloneVM_Task xmlns = "urn: vim25" & gt;

  & lt; _C type = 'VirtualMachine' & gt; VM - 938 & lt; / _This & gt;

  & lt; record type = "Folder" & gt; Group d1 & lt; / file & gt;

  & lt; name & gt; 1_UBUNTU 804 & lt; / name & gt;.

  & lt; spec & gt;

  & lt; location & gt;

  & lt; data store type = "Datastore" & gt; datastore-683 & lt; / store data & gt;

  & lt; pool type = "ResourcePool" & gt; resgroup-57 & lt; / pool & gt;

  & lt; / location & gt;

  & lt; model & gt; 0 & lt; / model & gt;

  & lt; powerOn & gt; 1 & lt; / powerOn & gt;

  & lt; config & gt;

  & lt; memoryMB & gt; 1024 & lt; / memoryMB & gt;

  & lt; numCPUs & gt; 1 & lt; / numCPUs & gt;

  & lt; / config & gt;

  & lt; / spec & gt;

  & lt; / CloneVM_Task & gt;

  However, the task itself returns an error saying: the operation is not supported on the object.

  Does anyone know what it is?

  The info that I'm sending should be 100% correct:

  - vm_id: the machine ID of the virtual MODEL VM I'm cloning (100% certain that it is correct)

  - file: the rootFolder returned by ServicContent

  - data store: the data store ONLY I should store VM on. When I query for this data store information it shows clearly that it is accessible and multipleHostAccess = true, so

  - resourcePool: I got this info when querying my ComputeResource properties. I have 1 cluster and resourcePool value that's what I put.

  I really have NO idea what's going wrong here... The CloneVM_Task creates a task - but that's where everything falls apart.

  Please HELP!

  Yes, you should not use the rootFolder, which is just the folder root inventory integer vCenter. A default vmFolder will still exists if you have additional folders, and that's the one you reference to. By default, you must question him to do this, where one day you decide to create folders against hard coding moref ID. The IDS are digital and probably default folder gets this value by iteration, but again, I recommend he petitioned against hard this coding.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• The objects are no longer self-aligning with the other

  Hello

  I am new to Adobe Illustrator CS4 and are in desperate need of expertise. I think settings got messed with, because now whenever I move an object, he tries is more 'auto align' with close objects or borders. I don't know how this feature is called, but it is when a smaller circle type of "jump" at the center of a larger circle, or I think that it will also show when limits are tangent.

  My apologies for my noobishness, but how can I activate this return? I find the program very difficult to use without it.

  Many blessings for your generous explanation and kindness.

  On the view menu: guides, Snap to Point. You may have hit a shortcut by accident.

  Peter

• Illustrator aligns with the pixel &amp; changes the path?

  I work with paths are for some reason strange and annoying, snaps to the pixel grid. I have even the 'Snap to Pixel' off and the traces are changed by the Illustrator so they dynamic enters the pixel grid. I've never experienced this before where illustrator actuall moving anchor points where he wants. Here is an example of what is going on (this happens in the raster preview and normal preview):

  Here is a vector path on a grid created to show where the pixels are:

  

  I select the object swap FILLING in the RACE and immediately you can see that illustrator changed the location of the paths:

  

  I share the RACE to FILL and it alters the paths still more!

  

  Here's another example:

  The paths are not clearly aligned with the pixel grid, but illustrator is trying everything possible to make the line of pixels to the top. (This image has "Quick align inside" and is previewing rasterized).

  

  Same thing but pixel not preview. Super weird behavior:

  

  Will there be some sort of setting in the preferences of masters that is causing this behavior? I did this wink on the grid and snap to pixel is turned off and rest nothing will do. Anyone encountered this?

  Thank you!

  I'm assuming that CS5 because you are talking to match the pixel grid. Is this correct?

  Possible bug, but...

  I can easily reproduce this problem with a small graphic and align on grid of pixels. If I disable snap to grid of pixels (in the transformation Panel) the problem disappears.

  Note there must be a very small chart for the question to stand.

  Are you sure you want to align the grid of pixels off?

  If so, you might try trashing your file.

• Segments of straight lines do not align with grid

  Whenever I draw a straight line segment, it is not lined up on the grid, it is slightly to the left or right side of the line of the grid. (you can see on the line down to the right in the picture).  It is annoying because I can't get a bow to align properly with the segment of the line, as you can see in the picture there is a cliff on the bow where I want to align perfectly on the line segment. I have snap to grid on passing, but I tried with him off and it still does the same thing.

  I tried object-path-join with the line and the CRA chosen, but all that is move the whole arc to the left. I tried to recover the anchor points of the line and move them to the middle and I can get one end to align with the line of sight of the grid, but as soon as I move the anchor in front on the line to straighten out, all snaps back to being slightly to the left or right.

  Someone has ideas of how to do to get my path of line to be directly on the grid, so it is aligned with the CRA?

  

  Any chance you have snap to grid of pixels as well... Check the transformation Panel.

• View CD can't mistake of player Director, was not found in the object #getPropRef, Script error. Continue?, yes no

  OT: Error player Director, not found in the object #getPropRef, Script error. Continue?, Yes No. nursing student cannot run his CD CD practice to work on other laptops. but not on it!

  Nursing Student cannot carry out its practice CD which comes with Prentice Hall Nursing book: "medical and nursing care 2nd edition, comments & justifications surgical."  CD works on PC and a laptop running Windows XP, Vista and Windows 7 and on an iMac; but not on it!  She has a Toshiba laptop with Windows Vista Home Premium and it just doesn't work!  My wife has lent her one of its laptops with Windows Vista, but the CD works fine.  What is the problem? I called Prentice Hall and got no help from them!  They said it was a computer problem.  This student is an exchange student and she would really any help.  I tried to clean the system and even tried the Optimizer5.2 perfect for the correction of errors in Script, but it didn't work.  Help please!  My only recourse is to backup all files and wipe the disk clean and start again to do a reinstall of all applications.  Any other ideas?  She had the phone since 2005 and the hard drive has only about 30% free space left on 147 GB.

  Hello cobblestone47,

  1. What is the version of the steering drive you use on your computer?

  2. the other users who are able to play the CD using the Director or shockwave player player is

  Player de Macromedia Director is also known as the Shockwave Player. I suggest that you uninstall the Director player and install the latest version of Shockwave player, and check if you have the same problem.

  You can follow the link below to download and install the latest version of Shockwave player:

  http://get.Adobe.com/Shockwave/

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Linked clone failed: the operation is not supported on the object

  Hi all - I would appreciate help on a related clone operation that is a failure.

  I use Quest vWorkspace to create linked clone VM in my environment.  It integrates with virtual Center and creates from a VM snapshot parent according to normal related clones.  It has just stopped working and I am trying to track down the cause.  The task fails with the error message in the console of VMware vCenter: the operation is not supported on the object.

  The vCentre is 5.5 and esxi.  vWorkspace is v8.0 MR1.  The parent VM is located on an iSCSI datastore.  I tried to put the clones of destination on premises and warehouses of NFS data with the same result.  Unfortunately I can't (don't want really to) move the VM parent from the data store that I have of many VM related to this virtual machine.

  The failure message is a bit generic, so I looked on through the vmkernel.log and vpxa.log and it is an excerpt from the vpxa.log whereby it shows failed task 153.  Can someone please indicate something in the newspaper that had to be examined or another newspaper to look at?

  vWorkspace attached error and below:

  Linked clone has not CreateLinkedClone_Task of CloneVmLinked failed! Task of VMware CreateLinkedClone_Task status error - the operation is not supported on the object. -Call stacks-VmLinkedClone.VmLinkedCloneService.CloneVmLinked String vmInvPath, String strSnapshotMor, String strNewVmName, String strSysprep, ManagedObjectReference morFolder, ManagedObjectReference morResPool, ManagedObjectReference morHost, String strDatastoreName, Boolean bQuickPrep, String domainNameIP, String

  See attachments

  Thank you very much
  Wikus

  Additional accessories:

  • 
    Untitled picture.png

  Hello guys,.

  For those of you already on 5.5, I did a few tests these days. I did find a magic bullet yet as a single parameter that is sure to break but I came up with a workaround.

  I found that if my ESXi server was still on the 5.1, vWorkspace could deploy clones linked via vCenter 5.5 - it's only when the ESXi is also on 5.5 that you have a problem.

  If any of you have ESXi hosts still on 5.1, you can deploy there for now.

  In ESXi 5.x, it is easy to have an ESXi virtual machine. You might want to consider creating some virtual boxes ESXi to deploy on while the vworkspace dev team look at why it does not work.

  I know that this is not the best solution in the world, but it's better than no work around

  Thank you, Andrew.