Select a Web page for tabs

Similar Questions

• Satellite P200D-128: Toshiba has a Web page for the graphics card drivers?

  Hi I want to update the driver for my card graphics ATI Mobility Radeon 2400HD with the updated driver, Toshiba has a Web page for the graphics card drivers?

  Concerning the best and warm
  Adrian Wainer

  Hello

  All Toshiba drivers for European notebook series can be found on the European driver Toshiba page:

  You can find it here:
  http://EU.computers.Toshiba-Europe.com-> support Download Center &-> Download drivers

  You will find all the latest drivers published by Toshiba

• but wireless connection can't get all web pages for display on any browser

  connected to a wireless connection but can't get all web pages for display on any browsersit is connected with good strengh but does not connect

  Hello

  What happens when you connect to the router via a wired connection?

  Method 1: Reset the Internet (TCP/IP) Protocol:

  One of the components of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you are unable to connect to the Internet, TCP/IP can be causing it.

  TCP/IP is a main component of Windows, you cannot delete it. However, you can reset TCP/IP to its original state by using the NetShell (netsh) utility. Reference:

  Reference:

  How to reset the Internet (TCP/IP) Protocol:

  http://support.Microsoft.com/kb/299357

  Method 2: Reset the default Hosts file

  The "hosts" file is an important Windows system file which maps hostnames to IP addresses. Its a simple text file that is stored in the folder "%windir%\System32\drivers\etc\" in Windows NT, 2000, XP, Server 2003, Vista, Server 2008 and Windows 7 32-bit editions. In the 64-bit editions, it can be also stored in the folder "%windir%\SysWOW64\drivers\etc\".

  Structure of the hosts file is very simple. It contains lines of text containing the IP address, followed by the host name.

  Sometimes this hosts file is hijacked by viruses, adware, spyware or Trojan software and is changed to redirect your browser to various websites containing malicious code. It could also block security Web sites and the Windows Update Web site in your system so that you can not install virus definitions and security updates in your operating system.

  Reference:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034

• Laptop will not load web pages for a few minutes after sleep

  HP M6-1045dx, Windows HP 64, SP1

  After waking from sleep, my computer does not load web pages for a few minutes after waking up from his sleep.

  I've tried to follow several times:

  Disabled/enabled wireless adapter

  Wireless adapter uninstalled/reinstalled software both links to HP and Intel.

  Did a clean install of the operating system.

  I sit within eight feet from my wireless router.  Another laptop connects instantly to sleep with no isses.

  Thank you.

  Download and install the latest Intel Wireless driver

  Intel Wireless Driver version 15.2.0.19

  I checked your BIOS driver. It is already updated to F.25. I would like to know what are the results with the new wireless driver.

• Web pages for e-mail will not display on my user profile

  The we page for our email appears on the side of my husband, but not on my own user.

  What e-mail program?

  Did he ever appear on your web page?

  If so:

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• Open the browser to display a web page for app V25

  The scenario is this: build an app with version 25 by Adobe App Builder-> open and see a problem in this app tab a link url in an article-> open the web page in app-> tab a url link on this web page (no attribute _target for this link)-->--> open the browser to display the web page.

  What I expect is that for the last stage of the web page is still displayed in the app, not in the browser?  It works in V24, how can I make it work like this in V25? Thank you

  Unfortunately, there is a bug to v25. Links in the HTML custom icon files should open the Web site in the browser in app, not in the external browser (Mobile Safari). A fix is planned for this bug. It should be fixed before the end of this week.

• Web page for the opening of the error button after publication:

  Hello

  I inserted a button and I have a valid URL link is entered in the "open URL or external file ', then when I previews with F8 for example I can't click my button and it will open the Web page in an external browser window. The problem is when I go and publish my project for the web as a Flash (.swf) file, and then open the published .htm page or .swf published when I try to click on the button, it shows only the cursor hand on my button and no action is performed when clicked. It is not yet open the browser at all, no new tab is opened in Firefox for example. I do not understand why it works when I Preview in Captivate 5 and does not work after publication? Anyone have any ideas? Thank you!

  Hello

  The link below can be your answer.

  Click here to view the page frequently encountered problems

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• I can't save complete Web pages for newegg.ca

  Hi Mozilla, when I try to save complete Web pages below in Firefox 42 it fails. It creates a folder for each of them, but not the .html file. When I click on the download arrow in Firefox, it says failed. I refreshed Firefox, but it does not solve the problem.

  I can however save complete pages below in Internet Explorer 11 but I did shorten the file name. I have included the Web pages below. My card Alienware M14XR2 i7-3630QM, 8 GB of RAM, NVIDIA Geforce GT 650 M, Windows 7 Home Premium Service Pack 1 64-bit.

  http://www.Newegg.ca/product/product.aspx?item=9SIA7RD3E65538
  http://www.Newegg.ca/product/product.aspx?item=N82E16834232777
  http://www.Newegg.ca/product/product.aspx?item=N82E16834232564
  http://www.Newegg.ca/product/product.aspx?item=N82E16834232793
  http://www.Newegg.ca/product/product.aspx?item=34-232-769

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• If I type a web page in my address bar and press ENTER, nothing happens. But if I go to bookmarks and select a web page, it works fine. Information

  When I select a favorite web page, it will put the web address in the address bar and it works perfectly. Thank you

  This problem may be caused by the AVG Safe Search extension

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Highlighting of certain parts of the Web page for printing

  I have a problem highlighting items to save to a file for printing of Web pages (specifically the text). If I pressed the left mouse button to highlight the text, the page is not auto scroll where the text is off the screen. An example is here:
  http://sonalacant.blogspot.com/search/label/agenda

  Ideas please, because it means I have to go back to IE for certain pages?

  Click on the first letter of the syntax you want to save (you will see nothing appear on the screen), then scroll down to the last letter of the sentence or paragraph, hold the SHIFT key and click on it. This will highlight everything between the two. Then CTRL + C to copy.

  Works in any browser or document.

• Auto button to translate a Web page for different languages?

  Buttons for any language:

  Russian (click to translate the page in Russian)

  German (click on it to translate the page in Russian)

  French (click to translate the page in Russian)

  *

  *

  *

  N language

  You can use GOOGLE translate to translate pages on the fly. There are other similar products. But this method is just a joke. The translations are really terrible.

  The only true method is to use a dynamic Web site structure, where the content of the web pages is stored in a database. Then by clicking on a button can fill the page with the language requested in the database version. Someone do the translations before-hand. It requires programming server side, as with PHP.

• Rendering of Web page for IE9 and mode creation in CS5

  Hi all

  I'm working on a Web page just to add a form. Before that I added the form on the page rendered fine in all browsers as an html tag. I created the contact component in a php file and copied it the code and css in the HTML file and changed for php.

  The form is running well and renders perfectly in firefox and chrome but it moves to the left of the screen in IE9 and there are problems with the style. The main problem is the dislocation of the page. I have not tested in older versions of IE that I can't install with the IE9 already on my computer.

  The link is: http://www.theonlineenglishclass.com/inicio_test.php

  In addition, mode creation in dreamweaver cs5, the view is shifted to the left.

  I have run it through the W3C validator and while it does not throw questions to the I don't think none of them are related to this issue. I know it could be any number of issues, but if someone could point me in the right direction, I would be very grateful

  Thanks in advance.

  James

  Alamshar wrote:

  Sorry, I re-read my original post and I was not to explain the problem very well. The entire Web page moves to the left in IE9. The issue is not with the form.

  My entire page is supposed to be centered with equal left and right margins.

  Remove these two lines of code to the beginning of your page:

• How to save Web pages for offline reading?

  After I have save the Web page in PDF format, when I open it with Adobe reader, the page I see is in a serious condition out of order, which is totally different from the Web page. Please help, thanks!

  You can use this RFA - we Pocket (formerly Read It Later) 3.0.4

• Web page's tab scrollbars too big, lost and info at the top of the web page, how to fix this

  Received a failure to connect to an online banking service, eventually getting a web page entirely filled by screen with no scroll bar, no menu bar at the top. Tried to restart firefox, restart the computer, removing/reinstalling firefox, all to nothing does not. Did not remove 'settings' assuming that my url / passwords would be deleted. How to get the web page to be 'size' correctly.

  You can try to close Firefox, moving localstore.rdf on Firefox profile, then restart Firefox. It should reset the window size and position. If it works, you will have to Redo toolbar customizations, you did. If this isn't the case, you can move back the localstore file in the profile again.

• How can I put a video created in adobe muse in dreamweaver to complete my web page for an assignment?

  I'm new to the creative cloud, etc.  I created a video/slideshow in adobe muse and wonder how to get it in my Web/Dreamweaver page?  I don't have a domain name or Web site or something like that.  Just trying to accomplish a task.

  Muse is a web design program.  I seriously doubt that you have created a video in.  You could have embedded a video that you created elsewhere within your web page of Muse.  Is that what you mean?

  You will get the best answers to the question of specific product if post you them in the appropriate product forums.

  Dreamweaver

  http://forums.Adobe.com/community/Dreamweaver?view=discussions

  Muse

  http://forums.Adobe.com/community/Muse?view=discussions

  Nancy O.