Select error Bay on Tecra M5
Hello
I have a Tecra M5 (M5L - Core [email protected] GhZ, 1 GB RAM, 100 GB HARD drive). As I bought it had only a Combo CD-RW/DVD, it can only play DVDs and burn CDs. So, I bought a DVD of Nec drive (Optiarc DVD RW AD - 7543-A).
But now when I turn on the lappy just after the "Toshiba" screen, pops up a message "Select Bay error" and then start Windows (XP Pro), it does not recognize the drive, it does not appear, and the reader don't either ejects when I push the button.
The strange thing is that when I pull chase him and plug it (while Windows is running) immediately it is recognized and I can use it without any problems, I can read and burn CD/DVDs. It just doesn't recognize it when the pc starts, but only when windows is running. I have updated the BIOS and drivers.
I also tried with a different burner, Toshiba, but it gives the same error.
Can someone help me?
Thank you!
Hello
It is always recommended to use parts compatible equipment 100% because in this way you can be sure that everything will work ok. I found the info Tecra M5 came with different ratings, and some models have a DVD super multi drive inside. The STRANGE even, you can use with your Tecra. It must be PA3359E-2DV2 part number.
Check it out!
I don't really know what you can do now, but in my opinion, you should simply exchanging the drive with a compatible.
Tags: Toshiba
Similar Questions
-
Try to download Acrobat Pro XI, get next error regardless of the drive that I select: "Error 1327: invalid drive...". »
Hi pastorjeff7878,
Please follow the steps mentioned in the KB: http://helpx.adobe.com/creative-suite/kb/install-error-1327-invalid-drive.html .
Kind regards
Romit Sinha
-
IDE #1 error on my Tecra 9000
I have a combo DVD/CD-RW drive in my Tecra 9000, model number UJDA710.
Unfortunately, when I start the laptop, I get the message Error in IDE #1.
It will always start in Windows XP, but the drive is not available and is
not shown in Device Manager.I read on the internet that it is something to do with the fact
This work of discs online slim Toshiba cable select (CSEL) default mode
but this can be fixed by an update of the firmware or CSEL-changer.Is this true and if so, what do I need solve the problem?
Thanks in advance.
I guess it's a disc that you added and not one that comes with the Tecra 9000 originally.
If the laptop worked fine previously (and otherwise works OK now) then Yes, you will need to change the drive to CSEL. There is a way to do this in hardware, by bridging two contacts on the connector IDE PCB, but you have to be VERY careful about the bride points correct and do it with a soldering tip fine iron. I made myself (to make a work of UJ - 820B in a Tecra 9100).
If I can find the details I'll post them upwards, otherwise someone else can have these practices.
-
Someone knows what kind of select bay (slim, ultra slim, very fat or what) use the 'new' Tecra M10 and can tell me where it is written that info on an official site of Toshiba...
Tip: don't waste time uploading the plug technical Toshiba, it isn't there, don't waste time to download the user guide; It is not there either...
Pat
Tecra M10 didn't select bay and that's the reason why you can't find information on this topic.
Good bye
-
"svchost" and "script" error on my Tecra S2
I have a Tecra S2. When I boot, I get a svchost.exe error and (sometimes) an on toshiba pc health script error. Can someone help me with this problem?
Its really bugging me.Hello
Have you checked the operating system to viruses?
Did you use an anti-virus program?
Well, I found information that could be a horse of TROJAN TOFGER-AP.
http://www.pcreview.co.UK/startup/Svchost.exe.phpIn my opinion, you need to update your antivirus program and do a full scan of your device.
Best regards
-
LAN error at startup (Tecra A2)
My Tecra A2 gives me an error message that say something about the zcfgsvc.exe who did something wrong.
The result is that if my wireless LAN is lit, he manages to connect to my network, and then it gives me the error message. If the wire is off, I still get the message.Does anyone know what the problem is and how it fix?
There is no answer on a searge of pilots.Rolf
Hello
ZCfgSvc.exe is part of the Intel adapters proset wireless utility. It is included with the installation of the drivers and included with the laptop computers equipped with the Intel Cintrino technology OEM installation.
In my opinion, you should try to download and install a newer wireless LAN driver.You can find it on the Web from Toshiba website.
http://EU.computers.Toshiba-Europe.com then Support downloads drivers and downloadsGood bye
-
Caddy optical Bay for Tecra S10-106
Hello
I would use an SSD instead of the conventional HARD disk, but SSDS are very expensive and that is why I would like to replace the optical drive with my conventional HARD drive. The optical drive is not often used and so I'm looking for a Bay optical caddy who easily replaced the DVD drive. I know that old Tecra Systems (e.g. 8100), that such a Bay was available.
I don't want to use an external drive, because I do not carry many devices with me. Please can someone help me?
Thanks in advance.
black_dragonHey mate,
I know that there are these optics by caddy for some Toshiba laptops but I don t know if they are available for Tecra S10 and if it of possible.
You should ask a service provider authorized in your country. If this an optical bay caddy is available, you order if by technicians and they can give you a detailed response. :)
-
Hello
After the Muse 2016.2 update, I made some changes in a Web site, I'm trying, updated through publication > FTP host and now the site is unavailable. I get the following error messages in Chrome:
JavaScript exception: error calling selection: TypeError: cannot read property 'msie' undefined.
The site is: duplycopy.com
I've attached a screenshot of the Chrome Console tab.
Any help will be very appreciated!
Daniel
Post edited by: Catherine Rollet
Hi Daniel,.
Thank you for reaching out to us on this subject. I just responded to you via email as well with more details.
We had to look more closely at the error that you get everywhere.
It seems that the problem occurs because third party shopping widget on your page load a stripped down version of jQuery (the popular JavaScript library) that does not include a method of detecting browser (jquery.browser) which is needed for the sites of Muse:
If you wish to continue using the third party widget, we recommend you reach out to the third party and inform them that if they want to load another version of jQuery that Muse loads by default it must load the entire library.
Please let us know if you have any questions or need any clarification.
Kind regards
Marc
-
Friends... for the last 2 days, I'm going crazy with this error and just can't go through with it.
DB: 11.2.0.3
Characteset: WE8I08859P1
Table: comments
Col: (col1 vachar2 (4000))
I move the comments table to UTF18 database characterset.
I am selecting 'col1' of table 'comments' and try to identify the lines that are more 4000 characters, so that I have find the rows of problem and fix them before the import.
Whatever I do just can't go
"Ora-01401: insert the value too large for the column.
error.
SELECT rowid
Comments
WHERE LENGTH (convert (col1, 'AL32UTF8')) > 4000;
Query works perfectly well until he hits line which increases to 4,000 characters when it converts the UTF8.
Is it a smart way to display of rowid and error?
OK, let's go.
I have reproduced your scenario on a system (v11.2.0.3) with CharacterSet = AL32UTF8.
That's why I had to convert it to something as AL16UTF16.
Like pl/sql can handle varcahr2 larger 4 000 bytes, I took this way.
create notes of table (col1 varchar2 (4000))
insert into comments values (lpad ('A', 4000, ' A'))
Select length (col1) in comments
LENGTH (COL1)
4000
Select convert (col1, 'AL16UTF16') comments
ORA-01401: inserted value too large for column
declare
l_var varchar2 (20000);
l_len pls_integer;
Start
for rec in (select col1, rowid comments) loop
l_len: = length (convert (rec.col1, 'AL16UTF16'));
If l_len > 4000 then
dbms_output.put_line (rec.rowid |': ' | l_len);
end if;
end loop;
end;
ABYrWhAJIAAAADUAAA: 8000
BTW: I'm still interested what happens if you issue the query above AL32UTF8 database on a connection to the database WE8I08859P1.
-
Hi all
I own PS CS5. For some time it has been to come up with the following error at the end.
"Errorpalette selective." "XML parsing error: 'not well formed (invalid token)' at line 1"
Is there a way to return to normal program?
see you soon
Nick
The selective Palette of Nik/Google plugin update.
-
The IKM selector selection error: IKM SQL for Hyperion Planning
Hello
On the tab 'Flow' of my model, I click on my head to target. Then on the drop down 'Selector IKM', select 'IKM SQL for Hyperion Planning. It gives the error:
Internal error: ODI-15526: IKM IKM SQL for Hyperion Planning not accepted for stage director and target technology
Any ideas? I am really new green on ODI and I am at the end to try to run my dimension build. Any help is appreciated.You must select a transit area which is different to the planning, because this isn't an intermediate technology supported. What you need to do is to go to the tab definition of your interface tick the 'target different transit zone"and then select a relational technology (that is, one that takes supported SQL) in the drop-down list below. If you have no relational db on stage your data and then select ENGINE SUNOPSIS MEMORY which is the memory in DB that is provided as part of the ODI.
-
Word key missing in to_number conversion in the SQL statement select error
ORA-00905: lack keyword for the below SQL statement error. It should be of to_number (m.EQUIP_SUB_CLASS_ID, '9999')
between 3800 and the 3699 where Clause. Is that what I miss in the SQL below?
SELECT M.EQUIP_NO,M.EQUIP_CLASS_ID, M.EQUIP_DESCR,M.ORG_ID from MAMIS.EQUIP M where M.EQUIP_NO in ( SELECT M.EQUIP_NO from MAMIS.EQUIP M, MAMIS.ORG O where upper(M.ORG_ID) like upper(O.ORG_ID) and length(replace(translate(M.EQUIP_SUB_CLASS_ID, '0123456789', '000000000'), '0')) is null and upper(M.fleet_status) like 'ACTIVE' and upper(M.ORG_ID) not like 'NA' and to_number(m.EQUIP_SUB_CLASS_ID , '9999') between 3699 and 3800 )
Hello
I don't see obvious errors.
Whenever you have a problem, please post a full test script that people can run to recreate the problem and test their ideas. Include CREATE TABLE and INSERT statements for all of the tables involved and the results desired from these data. Format your code so people can read and understand.
See the FAQ forum {message identifier: = 9360002}I saw a couple of things you need to know about Oracle, but none of them would cause an error "Missing key word".
There is no point in using the LIKE operator if you do use wildcards. For example
upper (M.fleet_status) like 'ACTIVE'
is slower than, but otherwise equivalent to
upper (M.fleet_status) = 'ACTIVE'
What are you trying to do here?
length ( replace ( translate ( M.EQUIP_SUB_CLASS_ID , '0123456789' , '000000000' ) , '0' ) ) is null
Want to see if m.equip_sub_class_id consists only of numbers, from ' 0 'to 9'?
If so, you can simply sayTRANSLATE ( m.equip_sub_class_id , 'X0123456789' , 'X' ) IS NULL
Depending on your front end, you may need a sem, i-colon (;) the end of your query.
-
I thought I knew how to get Oracle to report an error Table mutation, but when I tried to do it in a demonstration today, it didn't work. Here is what I tried:
I thought that, in a level trigger line, questioning the table on which the trigger is installed, you get an error of the changing table. Same thing with INSERT, UPDATE, or DELETE. Of course, I thought I'd get the problem with DML:SQL> set serveroutput on SQL> create table test_mte (f number); Table created. SQL> insert into test_mte values (1); 1 row created. SQL> insert into test_mte values (2); 1 row created. SQL> insert into test_mte values (3); 1 row created. SQL> create or replace trigger test_mte_bt 2 before insert on test_mte 3 for each row 4 declare 5 wk_cnt number; 6 begin 7 8 select count(*) into wk_cnt from test_mte; 9 dbms_output.put_line(wk_cnt); 10 11 end test_mte_bt; 12 / Trigger created. SQL> insert into test_mte values (4); 3 1 row created.
We are on Oracle 11.1.0.7. Could something have changed in this upgrade? I'm completely confused.SQL> create or replace trigger test_mte_bt 2 before insert on test_mte 3 for each row 4 declare 5 wk_cnt number; 6 begin 7 8 update test_mte set f = 10 where f = 1; 9 dbms_output.put_line('Updated: '||SQL%ROWCOUNT); 10 11 end test_mte_bt; 12 / Trigger created. SQL> insert into test_mte values (4); Updated: 1 1 row created.
Thank you
-= ChuckIf the trigger is an INSERT... VALUES, Oracle knows this is a special case and that exactly 1 line will be inserted. This means that, indeed, a row-level trigger is no different with a statement-level trigger so the restriction on the questioning of the trigger table is not present.
If you were writing your next INSERT statement as a query - even if this query returns a single row, you will get an error because Oracle knows the syntax that you are guaranteed to get exactly one line.
SQL> insert into test_mte 2 select 5 3 from dual; insert into test_mte * ERROR at line 1: ORA-04091: table SCOTT.TEST_MTE is mutating, trigger/function may not see it ORA-06512: at "SCOTT.TEST_MTE_BT", line 4 ORA-04088: error during execution of trigger 'SCOTT.TEST_MTE_BT'
Of course, when you write the actual code, you never want to count on each insert is a single-row INSERT statement... VALUES statement so there is not much cause to take advantage of this gap in practice.
Justin
-
The view table selection error external references
Can someone explain why the error near the bottom of the code below? If USER1 grants SELECT on the external table to User2, then USER2 can select the view without any problem; However, I would like to avoid to give User2 access to all the columns in the external table. (I mean only to give USER2 access to two of the four columns).
SQL> CONNECT sys AS SYSDBA Connected as SYS@ as sysdba SQL> CREATE USER user1 IDENTIFIED BY user1 User created. SQL> CREATE USER user2 IDENTIFIED BY user2 User created. SQL> GRANT CONNECT, CREATE TABLE, CREATE VIEW TO user1 Grant complete. SQL> GRANT CONNECT TO user2 Grant complete. SQL> GRANT READ, WRITE ON DIRECTORY EXT_DATA_DIR TO user1, user2 Grant complete. SQL> CONNECT user1/user1 Connected as USER1@ SQL> CREATE TABLE emp_xt ( emp_id NUMBER, first_name VARCHAR2(30), last_name VARCHAR2(30), phone VARCHAR2(15) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY EXT_DATA_DIR ACCESS PARAMETERS ( RECORDS DELIMITED BY NEWLINE FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' ) LOCATION ('emp.txt') ) REJECT LIMIT 0 Table created. SQL> SELECT COUNT(1) FROM emp_xt COUNT(1) ---------- 4 1 row selected. SQL> CREATE OR REPLACE VIEW emp_xt_view AS SELECT first_name, last_name FROM emp_xt; View created. SQL> SELECT COUNT(1) FROM emp_xt_view COUNT(1) ---------- 4 1 row selected. SQL> GRANT SELECT ON emp_xt_view TO user2 Grant complete. SQL> CONNECT user2/user2 Connected as USER2@ SQL> SELECT COUNT(1) from user1.emp_xt_view SELECT COUNT(1) from user1.emp_xt_view * Error at line 0 ORA-29913: error in executing ODCIEXTTABLEOPEN callout ORA-29400: data cartridge error ORA-04043: object "USER1"."EMP_XT" does not exist SQL> CONNECT user1/user1 Connected as USER1@ SQL> GRANT SELECT ON user1.emp_xt TO user2 Grant complete. SQL> CONNECT user2/user2 Connected as USER2@ SQL> SELECT COUNT(1) from user1.emp_xt_view COUNT(1) ---------- 4 1 row selected. {code}
user503699 wrote:
Sven wrote:
You have an interesting point for the current user AUTHID. What would be the consequences for that?Published by: Sven w. on August 11, 2010 16:45
I'm not quite familiar with the feature of the data cartridge, nor used TYPEs a lot. But as the external tables use a type defined by the system (ORACLE_LOADER), I think a SQL against an external table called the underlying type procedure/function, and it is where the user rights come into picture.
This seems very likely. I'm just thinking if there is a way around the problem. An idea might be to select on the view with User1 instead of user2. Perhaps via a loopback database link.
Complete shot in the dark:
not tested syntax
/* do this as user1! */ create database link myDb connect to user1 identified by user1 using 'myDB'; create view testLink_view as select * from externalTable_view@myDB; grant select on testLink_view to user2;
I do not know if you need create the link to the db, since these often telesignalisations are already in place.
-
Impossible to decode and import the wav/mp3 file selected"error in Captivate 4
Good afternoon.
I exported and modified a Captivate presentation audio in Soundbooth. After editing, I save the file as a. WAV. When I import the file to the slide, I receive the error message listed above.
I followed the other discussions in the forum and performed the following:
XP Pro (32 bit - SP3)
E-Learning Suite
Captivate 4
Soundbooth CS4
- Downloaded and installed new NSAudio.dll
- NSAudio.dll successfully registered
- Ran successfully the restoreCP4regentries.bat and the restoreRegPermCP4.bat
- Restarted the computer
- Ran the program as long as administrator (even if he asked me to re - register the product - a little strange)
I always get the error when I try to import WAV files. If I convert the files to MP3 format, they can be imported. At the moment I prefer not to import them in MP3 format.
WAV format is uncompressed, 44, 32 floating little (I also tried other bits).
I lost a whole afternoon of productivity to this.
Any thoughts on how to solve this problem? It seems that I followed all the recommendations I've seen so far.
Hello
Captivate seems a bit picky about WAV format. You might have to adjust a few settings with the WAV output. You could start by trying the following and see if it is resolved.
Start with a backup copy of the audio clip
Open base Windows Sound Recorder
Open the WAV file with questions in sound recorder
Click file > save as
Click the change... button - make no changes, and click OK (this should change it to PCM format)
Try to import the WAV file after that and see what happens.
Personally, I would use the MP3 myself. Not sure why you are against it. After all, this is what will end up in your compiled result.
See you soon... Rick
Useful and practical links
Maybe you are looking for
-
Firefox won't charge of some url / Web sites that work in other browsers
Whenever I try to load a beginning of following Web site with stk.co (e.g. stks.co/q1CqL ) Firefox gives the error message: The 'Accept' HTTP header field with a value of hc/url"; ' * / * ' could not be parsed. The same URL loads easily into Internet
-
Satellite X 200-pixel dead and guaranteed
Hello. I counted two dead in mine satellite x 200 lcd pixels.If I bring my laptop for repair under warranty, did they replace lcd? How many dead pixels are to warranty service?Toshiba guarantees that they laptops will have any dead pixels? Thank you.
-
I have: Scilab 5.4.0 (64-bit) LabVIEW 2012 (64-bit) LabVIEW Scilab Gateway (64-bit) Why shouldn't the scilab script work? I get error 1046. I tried to drop a matlab script and changing server as suggested in post. Thank you...
-
cannot wake up from sleep - reboots
Hello. Do not kno0w under which category of this post. 01/22/13, I got a message from the HP Support Assistant to let me know that he did not have a BIOS upgrade. He installed it. I restarted and several trials, I had a hard time getting into Windows
-
New Toshiba wireless turns off the Internet (by Linksys WRT110)
I "ORDERED" a new Toshiba A660 (custom) yesterday. We have a DSL with Motorola modem and Cisco Linksys WRT110 router with a Cat5 connection. For a brief period the Toshiba could access the Internet through the radio (I registered the computer and th