The IKM selector selection error: IKM SQL for Hyperion Planning

Hello

On the tab 'Flow' of my model, I click on my head to target. Then on the drop down 'Selector IKM', select 'IKM SQL for Hyperion Planning. It gives the error:

Internal error: ODI-15526: IKM IKM SQL for Hyperion Planning not accepted for stage director and target technology

Any ideas? I am really new green on ODI and I am at the end to try to run my dimension build. Any help is appreciated.

You must select a transit area which is different to the planning, because this isn't an intermediate technology supported. What you need to do is to go to the tab definition of your interface tick the 'target different transit zone"and then select a relational technology (that is, one that takes supported SQL) in the drop-down list below. If you have no relational db on stage your data and then select ENGINE SUNOPSIS MEMORY which is the memory in DB that is provided as part of the ODI.

Tags: Business Intelligence

Similar Questions

IKM SQL for Hyperion Essbase (data) error
Hello
I've created an interface between Oracle DB and Essbase 11.1.2.
I used Oracle DB as transit zone. I used IKM SQL for Hyperion Essbase (data) as a selector IKM.
But I got an error as below in step ("Load Data on Essbase"); Can you help me? Thank you...

org.apache.bsf.BSFException: exception of Jython:
Traceback (most recent call changed):
File "< string >", line 21, < module >

at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)

at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)

at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)

at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)

at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)

at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)

at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:202)

at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:919)

at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1261)

at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1419)

at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1668)

at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:432)

at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

at java.lang.reflect.Method.invoke(Method.java:597)

java.sql.SQLSyntaxErrorException: java.sql.SQLSyntaxErrorException: ORA-00936: lack of expression

at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:346)
at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2457)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
Hello

finished column mapping, or be owned by mapping active of course active for each column.

IKM SQL for Hyperion Essbase (metadata) - problem when you dial the name of the Member
Hello world

I need to load the metadata to Essbase to a relational database.
Essbase: 9.3, Oracle 9i, ODI 10.1.3.5.0
I have a dimensional table contains the data in the Scenario dimension. The table has 3 columns: code, alias, consolidation.
Example of 2 lines:
Effective law-
BDG budget-

I created a rule file load_scn.rul to update the scenario dimension in my essbase cube and at the launch of the console of administration services it does not work. Each Member has his alias and it is sign of such consolidation as specified in the table.

In ODI
I created an essbase data store, a data store for my table and an interface. The interface uses the knowledge "IKM SQL for Hyperion Essbase (metadata)" module and the load_scn.rul of State of charge.
When I run the interface, it will end successfully, but when I check the Essbase outline, the two members were loaded with the name of name of Member composed of all 3 columns in the table dimensional as a single string line!
I have a member named ' law, real, + "and another called ' bdg, budget,-'."
Members have no alias and peacebuilding is the default ('+') and not '-' as shown in the dimensional table.

Has anyone of you had this problem? If so, how to solve it?

Any help will be very appreciated!
Daniela
Sounds like in the rule under load in the IKM options you have to have the separator rules comma value and data > defined in the tab, replace it with commas in the rule of data source properties.

See you soon

John
http://John-Goodwin.blogspot.com/

IKM SQL for Hyperion Essbase (data)

I am trying to load data into essbase through the ODI interface however module "IKM SQL for Hyperion Essbase (data)".
Whenever data gets overwritten, how I accumulate this data during loading. As it is quite difficult for me to summarize the data, then load.
Kind regards
Amine ravi

Use a rule to load and set to add to the existing values in the State of charge, adjustable load rule name in the options of the IKM.

See you soon

John

http://John-Goodwin.blogspot.com/

Error using IKM SQL for Hyperion Essbase (data)
Get (last Intnermost): file ' < string >, line 75, in?
Error 'com.hyperion.odi.common.ODIConstants' attribute class has no attribute 'PRE_LOAD_MAXL_SCRIPT '.

I'm not usiing a pre load a MaxL Script. I even put the 'ABORT_ON_PRE_MAXL_ERROR' to no.

Any help would be appreciated.
Hello

You may be using the old java (jar) files in your directory of driver, in the most recent class ODIConstants has been updated to include "PRE_LOAD_MAXL_SCRIPT".

I would try to install a patch later or a later version of ODI.

See you soon

John
http://John-Goodwin.blogspot.com/

Failed to load data to Essbase (IKM SQL for Hyperion Essbase (DATA)
I am trying to load data to Hyperion Essbase. Unfortunately he is not going so well. I followed the instructions but I get this error "BUFFER_SIZE. I have not changed the default BUFFER_SIZE (it is set to < default >: 80) and I have not changed any other settings in the KM.

Appreciate any thoughts...

com.hyperion.odi.common.ODIConstants has No attribute * 'BUFFER_SIZE. "

org.apache.bsf.BSFException: exception of Jython:
Traceback (innermost last):
"< String >" file, line 82, inside?
AttributeError: class 'com.hyperion.odi.common.ODIConstants' has no attribute 'BUFFER_SIZE '.
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
at com.sunopsis.dwg.codeinterpretor.k.a (k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt (SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask (SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep (SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession (SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand (DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute (DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i (e.java)
at com.sunopsis.dwg.cmd.h.y (h.java)
at com.sunopsis.dwg.cmd.e.run (e.java)
at java.lang.Thread.run (unknown Source)

Published by: Chris Rothermel on April 13, 2010 15:44
Hello

What ODI and patch version you are running.
Looks like you are using a KM newer than the java files that are located in the oracledi\drivers directory, I would say that you need to update the files java essbase for a newer version.
In the last few patch releases memory size buffer has been added to the data load essbase KM for the use of the ASO, even if this meant you had to also update the java files as well as in the version.

See you soon

John
http://John-Goodwin.blogspot.com/

ODI - SQL for Hyperion Essbase data loading

Hello
We have created a 'vision' in SQL Server that contains our data. The view currently has every year and periods of Jan 2011 to present. Each period is about 300 000 records. I want to only load one period at a time. For example may 2013. Currently we use ODBC through a rule of data loading, but the customer wants to use ODI to be compatible with the versions of dimension metadata. Here's the SQL on the view that works very well. Is there a way I can run this SQL in the ODI Interface so it pulls only what I declare in the Where clause? If yes where can I do it?
Select
CATEGORY, YEAR, LOCATION, SCRIPT, DEPT, PROJECT, EXPCODE, TIME, ACCOUNT, AMOUNT
Of
PS_LHI_HYP_PRJ_ACT
Where
YEAR > = "2013" AND PERIOD = 'MAY '.
ORDER BY CATEGORY ASC ASC FISCAL_YEAR, LOCATION ASC, ASC, ASC, ASC, ASC, PERIOD EXPCODE PROJECT DEPT SCENARIO CSA ACCOUNT CSA;

Hello

Simply use the following KM to load data - IKM SQL for Hyperion Essbase (DATA) - in an ODI interface that has the view that you created the Source model. You can add filters to the source which are dynamically by ODI variables to create the Where clause based on the month and year. Make sure you only specify a rule of load method to load the data into the KM

OutOfMemoryError: Limit superior GC exceeded when loading directly the source using IKM sql for sql. Growing ODI_MAX_HEAP do not solve the problem.

OutOfMemoryError: GC overhead limit at execution a loading interface directly sql for sql with no work table.
I get the error message: error: exception OutOfMemoryError: higher GC limit exceeded when executing an interface making a direct using IKM SQL for SQL command load Append, source a 150millions lines table.
I have increased the ODI_MAX_HEAP and the interface run longer and failed. I'm already at: ODI_MAX_HEAP = 12560 m I tested with ODI_MAX_HEAP = 52560 m and still error.
I am following up to the memory of the server and I still have available memory...
Apart from the problem of memory I know that this type of load should be possible because the step of data load on LKM SQL to Oracle is able to load the work table $ CAN. Ideally, I want to emulate this behavior by using SQL for SQL IKM.
1 - What is the right path to follow here? (change the parameters of memory or modify the IKM?)

2 - ideas on how to solve the OutOfMemoryError: GC overhead limit exceeded error? (GC means Garbage Collector)
Execution of the IKM interface in the Simulator generates this code:
Load (Source) command:
Select
source - tbl.col1 COL1,
source - tbl.col2 COL2,
source-tbl. "' COL3 ' COL3
of public.source - tbl AS source-tbl
where
(1 = 1)
Default command (Destination):
insert into the source-tbl
(
col1,
col2,
COL3
)
values
(
: COL1,.
: COL2.
: COL3
)
My experience is very limited with ODI so I don't know about changing the code to the KMs
Thanks in advance.

Find a work around the error of generals limit exceeded GC:

-in my case I was running without the IDE so that changes made to the odiparams.sh were not useful.

-This means that I need to change the JVM settings to:

$ODI_HOME/oracledi/client/odi/bin/odi.conf

AddVMOption - XX: MaxPermSize = NNNNM

$$ODI_HOME/oracledi/client/ide/bin/ide.conf

AddVMOption - XmxNNNNM

AddVMOption - XmsNNNNM

Where NNNN is a higher value.

IKM SQL FOR SQL query add
Hello
I went through this link:
Ask about the creation and filling I$ table on different condition

But I read in the case of IKM SQL FOR SQL add no I$ table is created.
If this is true please tell me why not I$ is created for this IKM?
So please tell me how the Frother is checked it to Check Knowledge Module (CKM)?

Thank you
Sébastien

PS:
I'm a freshness in tech ODI. So I can fool me please don't bother me
1. you need to create a mapping. Next, you need to see the code generated at each stage of all.
Try to analyze it. Then you will have a clear idea.

If see vedio carefully as given below, you can find staging area is on the source. So its directly select all the columns in the source tab and the insertion of these value in the tab target. No need to use I$ table. Yet once there is no option of flow_control. You can find the static_control.
http://S3.amazonaws.com/ora/ODI-Simple_SELECT_and_INSERT-interface.swf

To learn more about flow_control and static_control please go through
http://odiexperts.com/flow-control-and-static-control/

Thank you.

Adapter ODI for Hyperion planning

Hi gurus,
I have problem with definition for Hyperion planning server data connection. What database server, I need to use for the connection of Hyperion Planning. Planning of the app is on separate servers that the cube. Cube is on Essbase server. This means that I need to two different connections, one for the data (essbase cube) for metadata (server when considering app). Is this really?
I made only one connection on essbase server and try reverse engineering to cube essbase, which I made with the planning, of model, but it gives me an error:
[com.hyperion.odi.planning.ODIPlanningException: com.hyperion.odi.planning.ODIPlanningException: could not connect to the instance of planning on host hostname], [port] port, check if connect you are correct.
Thank you

I put port 11333 on the server where is installed my workspace for planning, and finally I managed model of reverse engineering for Hyperion planning.

Why do we not use port no. 11333 for Hyperion planning?
Why do we not use port no. 11333 for Hyperion, planning for metadata by ODI?
More, what you need to know, when you deploy planning you will see that there is a process of 'Java RMI Registry' / service, it works on port 13333. The planning adapter communicates with the RMI registry and then communicates with the planning. If you need to know more, then look for "Java RMI" on the internet.

See you soon

John
http://John-Goodwin.blogspot.com/

The IKM - flags for update error
Hi OD integrators.
I got this error when loading data from flat files to Oracle table. Am train that is to my convenience.
Oh forgot to say that newbie am in ODI.
I create an interface that loads the data from the flat file to oracle db table and this is the first time loading. I chose IKM (IKM Oracle incremental update). Now I got the error in step 'flags to update.
Can you guide me to solve this error?
Hello

Yes certainly.

IKM SQL append will be compatible with any ANSI SQL DB. If your load is just a select and insert you may prefer that.

PS: Please close the thread with the assignment of points (useful/correct) for each answer, this will make the experts to help you more effectively and with impatience.

All the best.

Thank you
G

The view table selection error external references

Can someone explain why the error near the bottom of the code below? If USER1 grants SELECT on the external table to User2, then USER2 can select the view without any problem; However, I would like to avoid to give User2 access to all the columns in the external table. (I mean only to give USER2 access to two of the four columns).

SQL> CONNECT sys AS SYSDBA
Connected as SYS@ as sysdba

SQL> CREATE USER user1 IDENTIFIED BY user1
User created.

SQL> CREATE USER user2 IDENTIFIED BY user2
User created.

SQL> GRANT CONNECT, CREATE TABLE, CREATE VIEW TO user1
Grant complete.

SQL> GRANT CONNECT TO user2
Grant complete.

SQL> GRANT READ, WRITE ON DIRECTORY EXT_DATA_DIR TO user1, user2
Grant complete.

SQL> CONNECT user1/user1
Connected as USER1@ 

SQL> CREATE TABLE emp_xt
(
  emp_id     NUMBER,
  first_name VARCHAR2(30),
  last_name  VARCHAR2(30),
  phone      VARCHAR2(15)
)
ORGANIZATION EXTERNAL
(
  TYPE ORACLE_LOADER
  DEFAULT DIRECTORY EXT_DATA_DIR 
  ACCESS PARAMETERS 
  (
    RECORDS DELIMITED BY NEWLINE
    FIELDS TERMINATED BY ','
    OPTIONALLY ENCLOSED BY '"'            
  )
  LOCATION ('emp.txt')
)
REJECT LIMIT 0
Table created.

SQL> SELECT COUNT(1) FROM emp_xt

  COUNT(1)
----------
         4
1 row selected.

SQL> CREATE OR REPLACE VIEW emp_xt_view AS SELECT first_name, last_name FROM emp_xt;
View created.

SQL> SELECT COUNT(1) FROM emp_xt_view

  COUNT(1)
----------
         4
1 row selected.

SQL> GRANT SELECT ON emp_xt_view TO user2
Grant complete.

SQL> CONNECT user2/user2
Connected as USER2@ 

SQL> SELECT COUNT(1) from user1.emp_xt_view
SELECT COUNT(1) from user1.emp_xt_view
*
Error at line 0
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
ORA-04043: object "USER1"."EMP_XT" does not exist

SQL> CONNECT user1/user1
Connected as USER1@ 

SQL> GRANT SELECT ON user1.emp_xt TO user2
Grant complete.

SQL> CONNECT user2/user2
Connected as USER2@ 

SQL> SELECT COUNT(1) from user1.emp_xt_view

  COUNT(1)
----------
         4
1 row selected.
{code}

user503699 wrote:

Sven wrote:
You have an interesting point for the current user AUTHID. What would be the consequences for that?

Published by: Sven w. on August 11, 2010 16:45

I'm not quite familiar with the feature of the data cartridge, nor used TYPEs a lot. But as the external tables use a type defined by the system (ORACLE_LOADER), I think a SQL against an external table called the underlying type procedure/function, and it is where the user rights come into picture.

This seems very likely. I'm just thinking if there is a way around the problem. An idea might be to select on the view with User1 instead of user2. Perhaps via a loopback database link.

Complete shot in the dark:

not tested syntax

/* do this as user1!  */
create database link myDb connect to user1 identified by user1 using 'myDB';

create view testLink_view as select * from externalTable_view@myDB;

grant select on testLink_view to user2;

I do not know if you need create the link to the db, since these often telesignalisations are already in place.

How can I find out what is the cause of this error in SQL Developer Data Modeler

Friends,

I am trying to import features in SQL Developer Oracle Designer 10.1.2.3 Data Modeler.

If you need perform the following steps to import:

Template file-> Import-> Oracle Designer-> select connection to the base-> select work area-> select System application-> select an entity-> click Finish-> begins to import

During the import process, I see an alert with the message dialog box:

There are errors in import - check Log file

Clicking Ok dismisses the alert box, and I see the following summary screen:

Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
Oracle SQL Developer Data Modeler Import Log
Date and Time: 2010-08-09 14:27:26
Design Name: erdtest
RDBMS: Oracle Database 10g

          All Statements:           32
          Imported Statements:      32
          Failed Statements:           0
          Not Recognized Statements:      0

The entity appear in the logical view in SQL Developer Data Modeler.

While they were inspecting the log file, I see the following entry:

2010-08-09 13:50:34,025 [Thread-11] ERROR ODExtractionHandler - Error during import from Designer Repository 

java.lang.NullPointerException
     at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.createArcs(Unknown Source)
     at oracle.dbtools.crest.imports.oracledesigner.logical.ODORelation.generate(Unknown Source)
     at oracle.dbtools.crest.imports.oracledesigner.ODExtractionHandler.generateDesign(Unknown Source)
     at oracle.dbtools.crest.imports.oracledesigner.ODExtractionController$Runner.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)

Anyone can shed light on this error?

Thanks in advance for any help you may be able to provide.

We have identified that objects recovered and on the branches are not considered by the Data Modeler. This bug has been connected (#10022016) and is being implemented.

What

When trying to activate the welcome login screen, error message "client for netware server disabled."

Original title: how to pass the login prompt Classic at the Welcome screen to logon for windows xp professional

WHEN I TRY TO ACTIVATE THE LOG-IN WELCOME SCREEN, I GET THE MESSAGE "SERVER FOR NETWARE CLIENT HAS DISABLED ABILITY TO FIX THS PROBLEM UNINSTALL"SERVER FOR NETWARE CLIENT"IS THE ONLY CHOICE THAT I COULD FIND ON DISABLE NOT UNINSTALL." Help, please

Hi BobbyQE,

Follow the steps in the article.

Error message when you try to turn on welcome screen or Fast User Switching

The IKM selector selection error: IKM SQL for Hyperion Planning

Similar Questions

Maybe you are looking for