Select join + group of
Hellois it possible to implement the quiery following in single statement:
Select all the Hr.Countries.Region_ID, Hr.Regions.Region_name to all areas with > 3 countries table.
I can do this with an intermediate temporary table but can't suddenly:
Country: =.
Country_ID
country_name
Region_ID (FK to regions)
Regions: =.
Region_id
Region_name
TX
TR
Like this?
SELECT Region_ID, Region_name
FROM regions r
WHERE EXISTS
(SELECT 1
FROM countries c
WHERE c.region_id = r.region_id
GROUP BY c.region_id
HAVING COUNT (1) > 3)
G.
Tags: Database
Similar Questions
-
How to select entire groups or to multiple recipients in MAIL, rather than one at a time?
One way is to use the app to create a group with the intended recipients. Then when composing the email just type the group name in the To: field.
-
How to select a group nested in the PS?
When I use the self-select: Group option, it will select only the group most in which is placed my layer clicked; but I use a lot of groups nested inside other groups. Is there a way to change higher or lower level groups?
Select the Group of lower level by clicking in the layers panel is tedious, because when I click on a layer with the value automatic selection 'Sex', it will automatically expand groups in which it is placed and I have to scroll up to find the layer group.
Are you aware of the pop - up we get when ctrl-click with the tool move?
-
Dear all,
Kindly advise on below 2 doubts which have been daunting for quiet some time. The bottom has forced our requests to take alternative routes to receive solutions.
Doubt 1) is it possible for us to use 'select (*)' with a group and a join clause, if we have at least 2/3 tables with minimum 15-20 columns... given the constraint of having to add all the names column in the group by clause.
Question 2) is it possible to use "select" (*) with the exception of a single column of the table?
That is to say, I hate the output of a statement select (*) to have the entire field except a field in a tableAsk your advisor for the same thing. Excuse me because I have no examples to illustrate this point in time. A successful idea will do.
Thank you and best regards,
Séverine Suresh
Hey, Sebastian,
Séverine Suresh - 3035408 wrote:
Dear all,
Kindly advise on below 2 doubts which have been daunting for quiet some time. The bottom has forced our requests to take alternative routes to receive solutions.
Doubt 1) is it possible for us to use 'select (*)' with a group and a join clause, if we have at least 2/3 tables with minimum 15-20 columns... given the constraint of having to add all the names column in the group by clause.
Sure. If you had problems, you did it wrong. Your postal code, examples of data (CREATE TABLE and INSERT statements) and the results desired from these data.
Check out the Forum FAQ: Re: 2. How can I ask a question on the forums?
Normally, you don't want to ' SELECT *...» "in a join. Are most joins are equijoins, ' SELECT *...» "produced 2 copies of / columns used for Assembly. In addition, many tables have columns (for example, modified_date) that are not necessary in most applications.
All columns must be included explicitly in a GROUP BY clause. You cannot use * it.
You can not have parentheses around the * in ' SELECT *...» ». You might think 'SELECT COUNT (*) '
Question 2) is it possible to use "select" (*) with the exception of a single column of the table?
That is to say, I hate the output of a statement select (*) to have the entire field except a field in a table...
No.; If you don't want a particular column in the result set, you cannot use "SELECT *...» ».
Your front end can have so as not to display a column in the result set. For example, in SQL * more:
COLUMN modified_date NOPRINT
means that you won't see any column called modified_date.
-
Hi Im trying to count the number of appointments we do by our situation so I have a nominations table and a table so sites when I execute this query, I get
a column with the date and the second column with one account, now I also wanted to include the contract number of site, but as that would not work with grouping I added a where clause, so I could then run it once for each site but when I add the contract_number of the where I lose the County.
Any help would be great Im new to oracle by Ive used mysql for years what I want to do is get a query were can I join two table via a contract_number (ID of SITE) and I want to group by date of appointment and returned 3 columns
the County and the contract_number and the date.
so I can show how much appointment each site had a date.
FIRST QUERY
------------------------
Select TO_CHAR (APPOINTMENTS. APPOINTMENT_DATE_TIME, 'DD-MM-YYYY') as APPOINTMENT_DATE_TIME,
Count (DISTINCT from the appointment. SITE_ID) COUNTY
SITES SITES,
APPOINTMENTS APPOINTMENTS
where APPOINTMENTS. SITE_ID = SITES. CONTRACT_NUMBER
APPOINTMENT_DATE_TIME group
SECOND QUERY
-------------------------
Select TO_CHAR (APPOINTMENTS. APPOINTMENT_DATE_TIME, 'DD-MM-YYYY') as APPOINTMENT_DATE_TIME,
Count (DISTINCT from the appointment. SITE_ID) COUNTY
SITES SITES,
APPOINTMENTS APPOINTMENTS
where APPOINTMENTS. SITE_ID = SITES. CONTRACT_NUMBER AND SITES. CONTRACT_NUMBER = "MTNZ8013".
APPOINTMENT_DATE_TIME group
Hello
You have not yet published an insert for the sample data. [#8 response was not up yet when I have all this.]
Apps4u wrote:
This is what is returned if you look at lines 2 and 3, they have the same date...
They have the same year, month and day. Horodateurs Oracle (such as DATEs) include hours, miinutes and seconds as well (and horodateurs also have comments of a second). You're not showing the hours, minutes, seconds, or fractions of a second; If you do (TO_CHAR is a way) you will see that the appoitment_date_times are slightly different.
...
Select trunc (APPOINTMENTS. APPOINTMENT_DATE_TIME) as APPOINTMENT_DATE_TIME,
SITES. CONTRACT_NUMBER,
Count (APPOINTMENTS.ID) COUNTY
SITES SITES,
APPOINTMENTS APPOINTMENTS
where APPOINTMENTS. SITE_ID = SITES. CONTRACT_NUMBER
APPOINTMENT_DATE_TIME group, SITES. CONTRACT_NUMBER
...
You have changed
appointment_date_time to
TRUNC (appointment_date_time) in the SELECT clause, but not in the GROUP BY clause. You will need to change it in both places.
...
If I does not include the contract number I get the correct number
Select TO_CHAR (APPOINTMENTS. APPOINTMENT_DATE_TIME, 'DD-MM-YYYY') as APPOINTMENT_DATE_TIME,
Count (APPOINTMENTS.ID) COUNTY
SITES SITES,
APPOINTMENTS APPOINTMENTS
where APPOINTMENTS. SITE_ID = SITES. CONTRACT_NUMBER
APPOINTMENT_DATE_TIME group
APPOINTMENT_DATE_TIME COUNT 15/11/2015 2 15/11/2015 1 12/11/2015 1 15/12/2015 1 15/11/2015 1 Thus, line 1 has the date of 15/11/2015 and the number of 2, and I wish I had a 3rd column that contains the contract number.
Line 2 also has the date of 15/11/2015; then line 5. Those are really the correct results, you may want to maybe if there is no GROUP BY the number of contract? Would you like 3 separate rows for 15/11/2015 as the appointment_date_time?
-
How to select the group header with detailed data in a SQL
Dear Sir
I wish I had a little help from you. My goal is to create a view where the data should be in the appropriate format. In this format, I want to have for each header of a group.
I have 3 tables that they ar connected to the other (representing hierarchical data where financial plan breaks in different groups).
CRM_PLAN
CRM_PLAN_ID
DATE
AMOUNT
CRM_PLAN_PE
CRM_PLAN_PE_ID
TITLE
AMOUNT
CRM_PLAN_ID (REF CRM_PLAN key. CRM_PLAN_ID)
CRM_PLAN_MONTH
CRM_PLAN_MONTH_ID
YEAR
MONTH
AMOUNT
CRM_PLAN_PE_ID (foreign key to CRM_PLAN_PE. CRM_PLAN_PE_ID)
Data looks like:
CRM_PLAN
CRM_PLAN_ID | DATE | AMOUNT
1. 01.01.2012. 500
2. 01.02.2012 | 200
CRM_PLAN_PE
CRM_PLAN_PE_ID | TITLE | AMOUNT | CRM_PLAN_ID
1. Organization 1. 100. 1
2. Organization 2. 400. 1
5: 3 organization | 200 | 2
CRM_PLAN_MONTH
CRM_PLAN_MONTH_ID | YEAR | MONTH | AMOUNT | CRM_PLAN_PE_ID
1. 2012 | 1. 60. 1
2. 2012 | 2. 40. 1
5: 2012 | 1. 350. 2
4. 2012 | 2. 50. 2
3: 2012 | 1. 200 | 3
I would like to than the view that returns data as:
MONTH | AMOUNT
Organization 1. null
1. 60
2. 40
Organization 2. null
1. 350
2. 50
3 organization | null
1. 200
The main question is hot to write a sql as source for display to insert before each group a line with the value of the title of the table CRM_PLAN_PE column. Is it still possible? Perhaps you could suggest another method.
Notice will be used in the form of oracle where will be possible to change the data - I will make the necessary arrangements by trigger INSTEAD of.
Kind regards
Igor
Published by: user5528050 on 29.11.2012 02:23
Published by: user5528050 on 29.11.2012 02:24
Published by: user5528050 on 29.11.2012 02:25Hi, Igor,.
In this case, I think ROLLUP is a little simpeler GROUPING SETS, but you could do it anyway:
SELECT CASE WHEN GROUPING (tab2.id) = 0 THEN TO_CHAR (tab2.id) ELSE tab1.title END AS col_1 , SUM (tab2.amount) AS col_2 FROM tab1 JOIN tab2 ON tab1.id = tab2.tab1_id GROUP BY tab1.title , ROLLUP (tab2.id) ORDER BY tab1.title , GROUPING (tab2.id) DESC , tab2.id ;
If tab2.id cannot be NULL, you can use
NVL ( TO_CHAR (tab2.id) , tab1.title )
instead of the CASE expression and simplify the ORDER BY clause to
ORDER BY tab1.title , tab2.id NULLS FIRST
-
Does not let me join group teleconference or add people to my call
First of all im Windows Skype version 7.10.0.101 10 and im =)
OK, so I use Skype to chat with friends on PC and Xbox one, normally I start a call, click the small + symbol and then add people want or go to their profile and click on add to call.
Now, every time I do that it evokes just their profile picture all grayed out as they joined the call and left, they get also signs a call has been made (usually it connects it under recent) and whenever someone calls me and then try first to add someone else, the call ends immediately for me.
IIF, they make the call before hand and then try to add me I just get a strange group 'empty' which remains just in my Skype up until I have leave, don't call or even show the images. happened when I updated to Skype to the more recent it seems! any help would be apreciatedOn my end to friends, it makes the end call noise and flashing my name + picture for a brief second and he said something I 'impossible to add until I accept your request' even if they are already on my list of contacts (tried with several friends)
(it allows me to call one person at a time, the problem seems to occur only when several people are involved}
The reason because this is the new version of Skype is not compatatible with older versions in the Group call section. Bullcrap if you ask me. You and I are in the same boat. And we have to wait for our friends to update.
-
I can't select the groups in my outlook account
under the head of the people, next to the used button it have a drop-down menu to select groups. but I'm unable to find these days.
Hey Monty,
Are you referring to Microsoft Outlook or Outlook.com?
If you use Microsoft Office Outlook, then I suggest you according to the query in Microsoft Office Forum for better support.
Reference:
http://answers.Microsoft.com/en-us/Office/Forum/Outlook
If you are referring to Outlook.com, then send the application in the Windows Live Forum for assistance:.
Reference:
http://answers.Microsoft.com/en-us/windowslive/Forum/mail
I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.
-
Objective is that the anyconnect user must select group-alias, so that when a user enters his username and password he must go to his political group and tunnel-group specific. as I removed this command in webvpn 'no tunnel-group-list don't enable '. This I can not connect (user does not authenticate).
1 - my question is why his past does not?
Solution:
If I keep only a single tunnel-group by default and make several group policies and assign to each user with his specific group policy that it works. in user attribute means I have only question following the commands it works, but if I put "group-lock value test-tunnel" that it did not identify.
Please explain why.
WebVPN
allow outside
limit the cache-fs 50
SVC disk0:/anyconnect-win-3.0.10055-k9.pkg 1 image
enable SVC
internal strategy of group test-gp
attributes of the strategy of group test-gp
VPN-tunnel-Protocol svc webvpn
the address value test-pool pools
username, password test test
username test attributes
VPN-tunnel-Protocol svc
group-lock value test-tunnel
Strategy Group-VPN-test-gp
tunnel-group test-tunnel type remote access
attributes global-tunnel-group test-tunnel
Group Policy - by default-test-gp
tunnel-group test-tunnel webvpn-attributes
allow group-url https://192.168.168.2/test
Yes, you have the right solution. You only need to create 1 group of tunnel and multiple group policy. Under the attribute of the user, you re then group policy of vpn that you want the user assigned too.
You can also authenticate users against AD and configure ldap attribute map to map the user to a specific group policy automatically.
Here is an example of configuration if you happen to have the AD and will authenticate against AD:
http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00808d1a7c.shtml
Hope that helps.
-
Several repeating subforms that appear in the order of selection, not grouped.
Hi all, I have a problem with the repetition of the subforms. In my form, I have several subforms which I want to have the option of repetition through buttons. The problem is I want appear them on the form in the order in which keys were pressed and not appearing in the groups apparently (for example. A subform subform B, Subform subform NOT to, subform A subform B)
For example:
-A subform
-subform B
-C subform
Press the button A subform (related to the Action "Add a new instance of A subform") which makes this subform appear.
Then do the same for the subform B.
So if you want an another A subform appears I want it to appear in the sequence of those selected (eg. A, B subform, A subform subform) not A of A, B subform Subform subform.
.
Any help would be greatly appreciated.
Hello
I think the best idea would be to have each of these subforms in a subform.
When an instance of the any of these subform are added, add subform instance of parent, and hide/show subforms good you wanted to add instances
For example:
-ParentSubform
-SubformA (Hidden)
-SubformB (Hidden)
-SubformC (Hidden)
(Add the instance to SubformA)
_ParentSubform.insertInstance (ParentSubform.index + 1);
xfa.resolveNode ("ParentSubform [" + (ParentSubform.index + 1) m:System.NET.SocketAddress.ToString () + "]" "). SubformA.presence = "visible";
(Add the instance to SubformB)
_ParentSubform.insertInstance (ParentSubform.index + 1);
xfa.resolveNode ("ParentSubform [" + (ParentSubform.index + 1) m:System.NET.SocketAddress.ToString () + "]" "). SubformB.presence = "visible";
(Add the instance to SubformC)
_ParentSubform.insertInstance (ParentSubform.index + 1);
xfa.resolveNode ("ParentSubform [" + (ParentSubform.index + 1) m:System.NET.SocketAddress.ToString () + "]" "). SubformC.presence = "visible";
I hope this helps!
-
Selection of group and the radio text box
I have a form with a question like: "How did you who are we?" and a radio with some choice group. One of the radio group choice is "other - please describe! When selected, a text box changes to 'read only' and the user can write something. I'm not able to update a record with the user's selection in a field in a table (I can save either text or radio group selection area). Any help? Thank you!
You should check the value of the selected option button. If it's not ' I have this answer: ", assign the value to $_POST ['Proposal_text'].
If ((isset($_POST["MM_update"])) & ($_POST ["MM_update"] == "form1")) {}
If ($_POST ['proposal']! = ' I have this answer: "") {}
$_POST ['Proposal_text'] = $_POST ['proposal'];
}
$updateSQL = sprintf ("UPDATE sarcini SET solutie_6 = %s, introd_6 = %s WHERE id_question = %s",
GetSQLValueString ($_POST ['Proposal_text'], "text").
GetSQLValueString ($_POST ["'Full_name"], "text").
GetSQLValueString ($_POST ['id_question'], "int"));
-
Select all &; group, scale Strokes &; Styles via JavaScript?
Hello
I really wish the Forum search worked, because I'm sure that this issue has been addressed...
(1) is there a way to access the selection > all (Ctrl + A) and object > Group (Gtrl-G) using JavaScript controls?
If I was doing the process "in hand", I must select > all (Ctrl + A), group (Ctrl + G), create a new layer, cut (Ctrl + X) and paste (Ctrl + V).
My first attempt to do this programagically had to loop through all the elements of the art and the method move() to move one by one in a new GroupItem on the new layer. However, the results questionable cases at best because of the variability in the amount of nested groups, composed of path elements, masks clipping, etc..
So, I can probably get the feature select all by a loop through the objects of art and in implementing selected = true, but how can I get all those items in a single GroupItem all-at-once instead of one at a time?
(2) once I have everything in a single GroupItem, I would like to re-group size. However, using the resize() does not offer an option to scale the contours and the effects, as you can see, when you go to object > transform > scale...
Is it possible for a group with contours and effects scale lit via JavaScript?
Thanks for the comments!
No, JS can not play actions
no calculation, race number of scale is also in percent
-
Help of the complex select query (Group by)
Hello
I am in need of your help to create a unique select query for the data in the table below and whose output requies. I use oracle 10g on RHEL 5 version.
create table bustour (number of bussno (4), start_date date, number (2)) passenger;
ALTER session set nls_date_format = "dd-mm-yyyy";
insert into bustour values (4123, April 10, 2009 ", 20);
insert into bustour values (4123, may 10, 2009 ", 25);
insert into bustour values (4123, may 10, 2009 ', 18);
insert into bustour values (4123, June 10, 2009 ', 15);
insert into bustour values (6138, March 10, 2009 ', 16);
insert into bustour values (' 6138, March 10, 2009 ", 19);
insert into bustour values (6138, April 10, 2009 ', 22);
insert into bustour values (' 6138, April 10, 2009 ", 13);
insert into bustour values ("4123, July 10, 2009 ', 23);
insert into bustour values (4123, August 10, 2009 ", 27);
insert into bustour values (4123, November 10, 2009 ', 15);
insert into bustour values (6138, may 10, 2009 ', 16);
insert into bustour values (6138, may 10, 2009 ', 13);
insert into bustour values (6138, may 10, 2009 ', 18);
insert into bustour values (' 6138, may 10, 2009 ", 24);
insert into bustour values (6138, July 10, 2009 ", 20);
insert into bustour values (6138, August 10, 2009 ", 18);
So that we can know on what particular travel calendar, we have obtained maximum passengers and the date. (For calculating % of bonus driver)SQL> select * from bustour; BUSSNO START_DATE PASSENGERS ---------- ---------- ---------- 4123 04-10-2009 20 4123 05-10-2009 25 4123 05-10-2009 18 4123 06-10-2009 15 6138 03-10-2009 16 6138 03-10-2009 19 6138 04-10-2009 22 6138 04-10-2009 13 4123 07-10-2009 23 4123 08-10-2009 27 4123 11-10-2009 15 BUSSNO START_DATE PASSENGERS ---------- ---------- ---------- 6138 05-10-2009 16 6138 05-10-2009 13 6138 05-10-2009 18 6138 05-10-2009 24 6138 07-10-2009 20 6138 08-10-2009 18 17 rows selected. I want query output as below : Bussno start_date end_Date totalpassengers maxpessenger maxpassdate 4123 04-10-09 06-10-09 78 25 05-10-09 6138 03-10-09 04-10-09 70 22 04-10-09 4123 07-10-09 11-10-09 65 27 08-10-09 6138 05-10-09 08-10-09 109 24 05-10-09
Please help me to write the query.
Best regards
NishaOK, something like this:
with my_tab as (select 1 id, 4123 busno, to_date('04/10/2009', 'dd/mm/yyyy') start_date, 20 passengers from dual union all select 2 id, 4123 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 25 passengers from dual union all select 3 id, 4123 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 18 passengers from dual union all select 4 id, 4123 busno, to_date('06/10/2009', 'dd/mm/yyyy') start_date, 15 passengers from dual union all select 5 id, 6138 busno, to_date('03/10/2009', 'dd/mm/yyyy') start_date, 16 passengers from dual union all select 6 id, 6138 busno, to_date('03/10/2009', 'dd/mm/yyyy') start_date, 19 passengers from dual union all select 7 id, 6138 busno, to_date('04/10/2009', 'dd/mm/yyyy') start_date, 22 passengers from dual union all select 8 id, 6138 busno, to_date('04/10/2009', 'dd/mm/yyyy') start_date, 13 passengers from dual union all select 9 id, 4123 busno, to_date('07/10/2009', 'dd/mm/yyyy') start_date, 23 passengers from dual union all select 10 id, 4123 busno, to_date('08/10/2009', 'dd/mm/yyyy') start_date, 27 passengers from dual union all select 11 id, 4123 busno, to_date('11/10/2009', 'dd/mm/yyyy') start_date, 15 passengers from dual union all select 12 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 16 passengers from dual union all select 13 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 13 passengers from dual union all select 14 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 18 passengers from dual union all select 15 id, 6138 busno, to_date('05/10/2009', 'dd/mm/yyyy') start_date, 24 passengers from dual union all select 16 id, 6138 busno, to_date('07/10/2009', 'dd/mm/yyyy') start_date, 20 passengers from dual union all select 17 id, 6138 busno, to_date('08/10/2009', 'dd/mm/yyyy') start_date, 18 passengers from dual) -- end of mimicking your data; use SQL below: select busno, min(start_date) start_date, max(start_date) end_date, sum(passengers) total_passengers, max(passengers) max_passengers, max_pass_date from (select id, start_date, busno, passengers, distance, max(start_date) keep (dense_rank first order by passengers desc) over (partition by distance, busno) max_pass_date from (select id, start_date, busno, passengers, -- using tabibitosan method, borrowed from Aketi Jyuuzou dense_rank() over (order by id) - row_number() over (partition by busno order by id) distance from my_tab)) group by busno, distance, max_pass_date order by min(id) BUSNO START_DATE END_DATE TOTAL_PASSENGERS MAX_PASSENGERS MAX_PASS_DATE ---------- ---------- ---------- ---------------- -------------- ------------- 4123 04/10/2009 06/10/2009 78 25 05/10/2009 6138 03/10/2009 04/10/2009 70 22 04/10/2009 4123 07/10/2009 11/10/2009 65 27 08/10/2009 6138 05/10/2009 08/10/2009 109 24 05/10/2009
-
Delegate read-only for an OU select employee group
I'm delegating read-only access to all the user accounts on a specific OU in one of our areas.
When I add the group to the list of access with special permissions - Read all properties - it allows users to this group to change password for all accounts and group memberships in the ORGANIZATIONAL unit.
I just want what they see information = name, address, telephone number, email, postal address and group memberships.
What Miss me?
any help is appreciated.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
You can select a group of clips on the timeline to loop through reading?
In order to help me learn reading and lessons complex clip I use Premiere Pro to isolate sections of the difficulty of the study. I have independent clips on the timeline laid out in groups, each group marked with color labels so I can review and play only the groups of clips, or "parties", overall, but I would like to isolate each of these groups a little more if I could play each independently "in the loop" so I can still study them independently and isolated from others. Is it possible to do it on the timeline? I know I can score points on the clips themselves in the preview and output screens and loop, but now I would do each set of clips on the timeline in loop in the sections of clips. I hope that I wrote this clearly.
Put them on a different schedule and those in the playback loop.
Maybe you are looking for
-
How can I configure my Time Capsule wireless for backups
I recently changed the ADSL broadband cable. So it took to move my modem to the other side of the room where my cable connection. When I got the computer, modem, ADSL modem and the TC were a few feet from each other. However - now I have a wireless c
-
How to connect by Satellite L300-1 has 3 on TV?
I have laptop Satellite L300-1 has 3, and I can not show pc image to screen LCD TV Philips 5603d.I tried with the vga (pc) in RGB (TV) cable and with connector vga, DVI and DVI to HDMI on the side of TV, but nothing happened. Is it possible to see th
-
Tecra A9 - 12 H: format & reinstall Vista from recovery DVDs
Hello I think formatting my Tecra A9 - 12H and relocation, but must first some questionas. (1) there is a hidden partition which Vista doesn't find - Disk manager says he's 1.46 GB EISA Configuration. -What it means, this partition must be left as it
-
MSVBVM50. DLL missing in Windows 7 64 bit
I am trying to install the X 5 Web site and Windows 7 64-bit. I have the following message «The program can't start because MSVBVM50.» DLL is missing from your computer. Try reinstalling the program to fix this problem. " This software is compatible
-
Cannot run Director error code 0 x 80070057
I am trying to run windows movie maker and when it starts it gives me this code and stops, I reinstalled windows live because that's what he told me to do, but it still won't let me run the Director, TIME PASSES, I need an answer and a solution to my