Select records based on the monthly anniversary date

Similar Questions

• Poller DB to select records based on the timestamp

  Hi all

  I want select records from the coloumn timestamp where the timestamp is older than an hour. Is it possible to do this through poller db? I tried but unable to pass the dynamic value (currently - 1 hr)

  Thanks in advance!

  Eventually create a view based on the timestamp and singled out the dbpoller view.

• Select records based on the value

  Hello
  
  I have a table with 3 fields,

  WITH t1 AS(SELECT 'P1' po_number,'R1' route_id,1900 route_cost FROM dual
  UNION ALL SELECT 'P1','R2',2300 FROM dual
  UNION ALL SELECT 'P1','R3',1100 FROM dual
  UNION ALL SELECT 'P2','R7',1200 FROM dual
  UNION ALL SELECT 'P2','R8',4500 FROM dual)
  SELECT * FROM T1
  
  PO_NUMBER     ROUTE_ID     ROUTE_COST
  P1     R1     1900
  P1     R2     2300
  P1     R3     1100
  P2     R7    1200
  P2     R8    4500

  and I want to choose single route_id for a po_number where the cost is high
  and my output should be
  

  PO_NUMBER     ROUTE_ID     ROUTE_COST
  P1     R2     2300
  P2     R8     4500

  Thank you
  San
  
  Published by: sandeep9 on April 9, 2011 04:22

  WITH t1 AS(
             SELECT 'P1' po_number,'R1' route_id,1900 route_cost FROM dual UNION ALL
             SELECT 'P1','R2',2300 FROM dual UNION ALL
             SELECT 'P1','R3',1100 FROM dual UNION ALL
             SELECT 'P2','R7',1200 FROM dual UNION ALL
             SELECT 'P2','R8',4500 FROM dual
            )
  SELECT  po_number,
          max(route_id) keep(dense_rank last order by route_cost) route_id,
          max(route_cost) route_cost
    FROM  T1
    GROUP BY po_number
  /
  
  PO RO ROUTE_COST
  -- -- ----------
  P1 R2       2300
  P2 R8       4500
  
  SQL> 
  

  SY.

• unique several record based on the date record selection

  Hi experts,

  I have a table that contains multiple records for unique identification number now, I select the single record that contains the most recent date.

  Here is the structure

  Name of Type Null

  ------ ---- ------------

  NUMBER OF ID_P

  NAME_P VARCHAR2 (12)

  DATE_P TIMESTAMP (6)

  Reviews

  ---------------------

  1 loosi 22 August 13 01.27.48.000000000 PM

  1 hahahaha August 26, 13 01.28.10.000000000 PM

  KK 2 22 August 13 01.28.26.000000000 PM

  Emmeline 2 26 August 13 01.28.42.000000000 PM

  now I have to select below 2 lines how to write select qurie for this?

  1 loosi 26 August 13 01.27.48.000000000 PM

  Emmeline 2 26 August 13 01.28.42.000000000 PM

  Hello

  You can use the ROW_NUMBER analytic function.

  I don't have a copy of your table, so I'll use scott.emp to illustrate.  In scott.emp, there may be several lines for a single job.  To display only 1 row per job, hiredate line with the most recent:

  WITH got_r_num AS

  (

  SELECT empno, hiredate-, deptno, job or whatever columns you want

  ROW_NUMBER () taken OVER (PARTITION OF work

  ORDER BY hiredate DESC

  ) AS r_num

  FROM scott.emp

  -WHERE--if you need a filter put it here

  )

  SELECT *- or the list of all columns except r_num

  OF got_r_num

  WHERE r_num = 1

  ;

  What results do you want in the case of links?  Depending on your needs, you can add expressions of tiebreaker to the analytical ORDER BY clause or the use of RANK instead of ROW_NUMBER.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Get the number of days in a month based on the month and year of fields

  I have a column in my form which lists the days in a month. I want to configure a hidden field that calculates the total number of days in a month, based on the month and year of the field inputs. The number of days will determine what appears on the column. For example, if I put 4 months, and 2016 in the field of the year, I get 30 in the hidden field. Thus, on the column 'Day', I'll have numbers 1-30. Or if I put 2 months and 2016 in the field of the year, I get the 29 in the hidden field. If the numbers 1-29 appears in the column 'day '.

  Found this on some forum javascript code:

  //Month is 1 based
function daysInMonth(month,year) {
   return new Date(year, month, 0).getDate();
}

//July
daysInMonth(7,2009); //31
//February
daysInMonth(2,2009); //28
daysInMonth(2,2008); //29

  I do not know how to convert this code in JavaScript to adobe and don't really know how to use it. All I know how to do is to configure the field values for the field month and year as variables. I am a novice programmer and would appreciate it really all the help I can get. Thank you in advance!

  The code seems to be JavaScript and runs as needed by using the JavaScript console.

  I would like to consider making more general code, so if you have a date string that includes at least the month and year we could just call the function and get the number of days for that month.

  The following script will calculate the number of days in a month, by using at least the month and year values can display the result on the JavaScript console and all of the value field for the field that has this code as the custom calculation Script.

  function daysInMonth (oDate) {}
  return new Date (oDate.getFullYear (), oDate.getMonth () + 1, 0) .getDate ();
  }

  nMonth var = this.getField("Month").valueAsString; get the value of month;
  nYear var = this.getField("Year").valueAsString; get the value of the year;

  Event.Value = "";

  If (nMonth! = "" & nYear!) = "") {}
  var MyDate = util.scand ("' / mm/yyyy ', nMonth +" / "+ nYear); convert to date object;
  var nDaysInMonth = daysInMonth (MyDate); get the number of days;

  Console.Open (); Open the JavaScript console;

  Console.clear(); clear the console;

  Console.println ("Days in" + nMonth + ":" + nDaysInMonth); show days in month;

  Event.Value = nDaysInMonth; Set the value of the field;

  }

• How to get the values based on the most recent date

  Oracle Version 8i
  
  
  
  How to get the new_value based on the most recent date
  
  SELECT max (MODIFIED_ON), the Group LOG_ITEM_CHARACTERISTICS by MODIFIED_ON new_value - does not
  
  Please, someone help me
  

  CREATE TABLE LOG_ITEM_CHARACTERISTICS
  (
    CHAR_LOG_ID          NUMBER(10)               NOT NULL,
    PIRM_ID              VARCHAR2(8)              NOT NULL,
    CONSTANT_FLAG        VARCHAR2(1),
    CHARACTERISTIC_NAME  VARCHAR2(25)             NOT NULL,
    TYPE_NAME            VARCHAR2(10)             NOT NULL,
    NEW_VALUE            VARCHAR2(3000),
    UOM                  VARCHAR2(10),
    MODIFIED_BY          VARCHAR2(30),
    MODIFIED_ON          DATE
  )
  
  SET DEFINE OFF;
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187376, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '1', 'AMPS', 'EMPXD88', TO_DATE('10/25/1999 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187377, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMPXD88', TO_DATE('09/22/1998 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187378, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '0', 'AMPS', 'EMDXB88', TO_DATE('09/22/1998 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187384, '0307490N', 'N', 'OUTPUT CURRENT', 'PS2030/WVL', '2', 'AMPS', 'EMAXC29', TO_DATE('11/10/2000 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (187385, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55.1', 'VOLTS', 'EMAXC29', TO_DATE('10/19/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_ON)
   Values
     (2400742, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '2', 'AMPS', TO_DATE('10/19/2001 00:00:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (574093, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '2', 'AMPS', 'EMCTH88', TO_DATE('12/13/2002 11:55:16', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (574094, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMCTH88', TO_DATE('12/13/2002 11:55:16', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131486, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131487, '0307490N', 'N', 'LAST MEASURED DATE', 'PS2030/WVL', '16-12-04', 'DD/MM/YY', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131488, '0307490N', 'Y', 'POWER SUPPLY', 'PS2030/WVL', 'ESSENTIAL', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (3131489, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMCTH88', TO_DATE('12/16/2004 14:31:14', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (4759086, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (4759087, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '54.9', 'VOLTS', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (4759088, '0307490N', 'N', 'LAST MEASURED DATE', 'PS2030/WVL', '14/11/07', 'DD/MM/YY', 'EMRCT88', TO_DATE('11/15/2007 14:33:03', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646012, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '5', 'AMPS', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646013, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646014, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646015, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646016, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 12:56:17', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646057, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646058, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6646059, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'null', 'PAUL DEVERILL', TO_DATE('01/06/2011 13:03:18', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648577, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '6', 'AMPS', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648578, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648579, '0307490N', 'Y', 'YR ROUTINES REQUIRED', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:35:45', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648580, '0307490N', 'Y', 'BATT TEST SET AT 3M', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:36:00', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648581, '0307490N', 'Y', 'CAP ALARM INHIBITED', 'PS2030/WVL', 'NULL', 'EMPXD88', TO_DATE('01/07/2011 13:36:10', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648634, '0307490N', 'N', 'MEASURED LOAD ON PER', 'PS2030/WVL', '5', 'AMPS', 'EMPXD88', TO_DATE('01/07/2011 13:51:06', 'MM/DD/YYYY HH24:MI:SS'));
  Insert into LOG_ITEM_CHARACTERISTICS
     (CHAR_LOG_ID, PIRM_ID, CONSTANT_FLAG, CHARACTERISTIC_NAME, TYPE_NAME, NEW_VALUE, UOM, MODIFIED_BY, MODIFIED_ON)
   Values
     (6648635, '0307490N', 'N', 'OUTPUT VOLTAGE', 'PS2030/WVL', '55', 'VOLTS', 'EMPXD88', TO_DATE('01/07/2011 13:51:06', 'MM/DD/YYYY HH24:MI:SS'));
  COMMIT;

  user4587979 wrote:
  Hi Frank

  Yes, but I had more than 2 tables with item_characteristics, type_characteristics

  If there are other tables involved, then CREATE TABLE and INSERT statements for them (for the relevant columns only). You must not post a lot of examples of data; usually just a couple of lines per table is enough to show the problem.
  Also post the results desired from these data.

  What I try to do is, I'm comparing new_value in log_item_characteristics (whichever is most recent) with CHR_VALUE in the item_characteristics and the needs of different output values

  I am trying to query is not giving desired out put

  Point out some places where the output is wrong and explain how you get good results in these places, using specific examples from the data sample.

  select  lic.PIRM_ID, ic.CHR_ID, lic.CHARACTERISTIC_NAME,
  lic.TYPE_NAME, ic.CHR_VALUE, lic.NEW_VALUE,  lic.MODIFIED_BY,  lic.MODIFIED_ON,
  ic.CREATED_BY, ic.CREATED_ON,ic.MODIFIED_BY, ic.MODIFIED_ON
  from log_item_characteristics lic, item_characteristics ic,type_characteristics tc  where
  lic.TYPE_NAME=tc.TYPE_NAME
  and lic.CHARACTERISTIC_NAME=tc.CHR_NAME
  and lic.PIRM_ID=ic.PIRM_ID
  and tc.CHR_ID=ic.CHR_ID and ic.CHR_VALUE <> lic.NEW_VALUE
  and lic.pirm_id in ('0307490N','0307521C')
  order by lic.pirm_id
  

  Thank you; It is useful to see the existing query. Really, you have to format your code.

  Please can you help me

  What you've posted so far is like saying "I'm going 200 meters to the North, and then 500 meters East, but I'm not getting where I want to go." I would have a better chance to help you if you said, 'I'm out of my house, at 100, Elm Street and try to get to the supermarket at Broadway 279. I'm going 200 meters to the North... ', or, even better. "I want to buy a newspaper and some orange juice, so I thought I'd go to a convenience store. I start at my house, at 100, Elm Street... »
  Always post some examples of data (CREATE TABLE and INSERT statements, as you did in your first post) and the desired results from these data. Explain how you get these results from these data.

• Selection of records based on the flag

  Hi all
  
  I have records as follows:
  
  Program name Effective_Date Valid_Flag
  N 10/02/2012 ABCD
  N 14/02/2012 ABCD
  ABCD 20/02/2012 Y
  N 01/03/2012 ABCD
  N 10/03/2012 ABCD
  ABCD 14/03/2012 Y
  N 25/03/2012 ABCD
  N 26/03/2012 ABCD
  N 27/03/2012 ABCD
  N 28/03/2012 ABCD
  N 29/03/2012 ABCD
  ABCD 25/04/2012 Y
  
  
  
  I have to write a select statement to keep the first record and then only pull records when the Valid_Flag has changed. The result set should be as below.
  
  Program name Effective_Date Valid_Flag
  ABCD 10/02/2012 N - I kept the first record
  20/02/2012 ABCD is - Valid_Flag chages to a Y for the first time and so on.
  N 01/03/2012 ABCD
  ABCD 14/03/2012 Y
  N 25/03/2012 ABCD
  ABCD 25/04/2012 Y
  
  If there is no change in the flag, I don't have to draw from this record. Please help with suggestions of SQL. Thanks for your time and your help.

  ssk1974 wrote:
  Hi all

  I have records as follows:

  Program name Effective_Date Valid_Flag
  N 10/02/2012 ABCD
  N 14/02/2012 ABCD
  ABCD 20/02/2012 Y
  N 01/03/2012 ABCD
  N 10/03/2012 ABCD
  ABCD 14/03/2012 Y
  N 25/03/2012 ABCD
  N 26/03/2012 ABCD
  N 27/03/2012 ABCD
  N 28/03/2012 ABCD
  N 29/03/2012 ABCD
  ABCD 25/04/2012 Y

  I have to write a select statement to keep the first record and then only pull records when the Valid_Flag has changed. The result set should be as below.

  Program name Effective_Date Valid_Flag
  ABCD 10/02/2012 N - I kept the first record
  20/02/2012 ABCD is - Valid_Flag chages to a Y for the first time and so on.
  N 01/03/2012 ABCD
  ABCD 14/03/2012 Y
  N 25/03/2012 ABCD
  ABCD 25/04/2012 Y

  If there is no change in the flag, I don't have to draw from this record. Please help with suggestions of SQL. Thanks for your time and your help.

  In the future, it would be nice if you could provide the sample data as below, I created.

  ME_XE?with data as
    2  (
    3     select 'ABCD' as col1, to_date('2/10/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
    4     select 'ABCD' as col1, to_date('2/14/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
    5     select 'ABCD' as col1, to_date('2/20/2012', 'mm/dd/yyyy')       as col2, 'Y' as col3    from dual union all
    6     select 'ABCD' as col1, to_date('3/01/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
    7     select 'ABCD' as col1, to_date('3/10/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
    8     select 'ABCD' as col1, to_date('3/14/2012', 'mm/dd/yyyy')       as col2, 'Y' as col3    from dual union all
    9     select 'ABCD' as col1, to_date('3/25/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
   10     select 'ABCD' as col1, to_date('3/26/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
   11     select 'ABCD' as col1, to_date('3/27/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
   12     select 'ABCD' as col1, to_date('3/28/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
   13     select 'ABCD' as col1, to_date('3/29/2012', 'mm/dd/yyyy')       as col2, 'N' as col3    from dual union all
   14     select 'ABCD' as col1, to_date('4/25/2012', 'mm/dd/yyyy')       as col2, 'Y' as col3    from dual
   15  )
   16  select *
   17  from
   18  (
   19     select
   20             col1, col2, col3,
   21             lag(col3) over (partition by col1 order by col2 asc) as last_flag
   22     from data
   23  )
   24  where last_flag    != col3
   25  or    last_flag    is null;
  
  COL1         COL2                       COL LAS
  ------------ -------------------------- --- ---
  ABCD         10-FEB-2012 12 00:00       N
  ABCD         20-FEB-2012 12 00:00       Y   N
  ABCD         01-MAR-2012 12 00:00       N   Y
  ABCD         14-MAR-2012 12 00:00       Y   N
  ABCD         25-MAR-2012 12 00:00       N   Y
  ABCD         25-APR-2012 12 00:00       Y   N
  
  6 rows selected.
  
  Elapsed: 00:00:00.08
  ME_XE?
  

  See you soon,.

• Retention of records based on the end of the calendar year

  Content using WebCenter 11 g and Records Management, I'm looking for a way to create a rule of provision based on the end of a calendar year.  For example, the rule might wait two years after the end of the calendar year in which the content item has been published.  Does anyone know how to do this?  I'm looking for something that is easy to maintain, but right now my best option is to create a metadata field to end of calendar year and then do a little iDoc script to set point which is archived for each content.  I would really like to avoid this if possible.  Any ideas?

  I think what you're trying to do is to "synchronize on the period start date.  It is part of the definition of the trigger.

  http://docs.oracle.com/cd/E21764_01/doc.1111/e10640/e01_interface.htm#RMDSG620.

  Assuming that the trigger is based on the release date:

  -An item is activated in June 30, 2016.

  -After the date of recording, wait two years.  This makes the eligible trigger on June 30, 2018.

  - But you want to wait until the end of 2018 to make available.

  -Check the above mentioned framework would force alienation to fire on January 1, 2019, instead of June 30, 2018.

• Apex 5 schedule: different color based on the value of data field

  Dear Experts,

  I need to have a different color for each record on the calendar based on the value of the data field (eg. category).

  How can I achieve this?

  Thank you!

  See: -.

  You don't have to wait for APEX 5 integration FullCalendar ~ Blog of Doug Gault...

• Delete records based on the foreign keys of oracle 11 g

  I have a requirement to remove the records from the tables in the order according to

  the existing foreign keys.

  I for example, the following tables and the pk, fk constraints:

  create table one

  (aa number (1),)

  descr varchar2 (20));

  ALTER table one

  Add constraint a_pk key (aa) primary;

  create table b

  (aa number (1),)

  descr varchar2 (20));

  ALTER table b

  Add constraint b_pk key (aa) primary;

  create table c

  (aa number (1),)

  descr varchar2 (20));

  ALTER table c

  Add constraint c_pk key (aa) primary;

  create table a2

  (aa number (2),)

  id_aa number (1).

  descr varchar2 (20));

  ALTER table a2

  Add constraint a2_pk key (aa) primary;

  ALTER table a2

  Add constraint a2_fk foreign key (id_aa)

  references a (aa);

  create table b2

  (aa number (2),)

  id_aa number (1).

  descr varchar2 (20));

  ALTER table b2

  Add constraint b2_pk key (aa) primary;

  ALTER table b2

  Add constraint b2_fk foreign key (id_aa)

  references b (aa);

  create table z

  (aa number (3),)

  id_aa number (1).

  id_bb number (1).

  descr varchar (20));

  ALTER table z

  Add constraint z_pk key (aa) primary;

  ALTER table z

  Add constraint z_fk1 foreign key (id_aa)

  references a (aa);

  ALTER table z

  Add constraint z_fk2 foreign key (id_bb)

  references b (aa);

  So, I want to choose the names of the tables in such an order so as

  deleting records will succeed...

  I built the following sql query (using the recursive subquery factoring):

  [p]

  with q (r_constraint_name, table_name, constraint_name, lvl) as

  (select table_name, constraint_name, r_constraint_name 1 lvl

  from user_constraints one

  where a.constraint_type = 'P '.

  Union of all the

  Select b.table_name b.constraint_name, b.r_constraint_name, q.lvl + 1 lvl

  from user_constraints b

  Join q

  on (q.constraint_name = b.r_constraint_name)

  where b.constraint_type = 'R '.

  )

  Select f.table_name, f.constraint_name, f.r_constraint_name, f.lvl

  q f

  [/ p]

  I want the results as the following list:

  Table-name

  ----------------

  B2

  A2

  Z

  A

  B

  C

  The table - B2, A2, Z - (in any order) must first referred in the list

  because they are based on the other three tables - A, B, C. Thus, in order to remove the

  A, B, C table records the B2, A2, table Z records must be beleted first.

  The query I posted above has the problem that it displays tables A2, B2 twice

  (1 because they have a pk and 2 because they have fk referring A, B relatively tables).

  Is there a solution for this problem?

  Note: I use db11g v2

  I wrote not all relationships of tables user_constraints (only argument constraint_name = r_constraint_name)

  Thank you

  SIM

  I have a requirement to remove the records from the tables in the order according to

  the existing foreign keys.

  . . .

  The table - B2, A2, Z - (in any order) must first referred in the list

  because they are based on the other three tables - A, B, C. Thus, in order to remove the

  A, B, C table records the B2, A2, table Z records must be beleted first.

  Is there a solution for this problem?

  Yes - the 'solution' is to use ON DELETE CASCADE, as appropriate or write a procedure that removes tables in the proper order.

  The solution is NOT to try to use dynamic sql statements to do so.

  You already know the good parent/child relationships. Simply create a procedure that uses the correct order.

  Analyses are necessary in any case to determine the proper order AND press the appropriate values to use to remove the appropriate lines

  Your DDL for tables and constraints must be in a version control system

  Update the procedure when / if new constraints or tables are added to the application

  IMHO, you must use dynamic SQL NOT to try to adjust automatically if a new constraint appears. New constraints should not appear by accident - they appear ONLY as part of a well planned release.

• Create lines based on the difference in date

  Hello

  I would like to create lines based on the difference between the start and end dates (per year).

  for example

  ID1  Start_time                                             End_time                                                      ID2
  07/01/2003 1, 12.00.00.000000000 2005-01-07 12.00.00.000000000 123

  07/01/1999 1, 12.00.00.000000000 07/01/2003 12.00.00.000000000 345

  I need:

  ID1  Start_time                                             End_time                                                      ID2
  07/01/2004 1, 12.00.00.000000000 2005-01-07 12.00.00.000000000 123

  07/01/2003 1 12.00.00.000000000 07/01/2004 12.00.00.000000000 123

  1 01/07/2002 12.00.00.000000000 07/01/2003 12.00.00.000000000 345

  07/01/2001 1, 12.00.00.000000000 01/07/2002 12.00.00.000000000 345

  07/01/2000 1, 12.00.00.000000000 01/07/2001 12.00.00.000000000 345

  07/01/1999 1, 12.00.00.000000000 07/01/2000 12.00.00.000000000 345

  Thank you

  Hello

  Here's one way:

  SELECT ID1

  , ADD_MONTHS (start_time, 12 * (LEVEL - 1)) AS start_time value

  , ADD_MONTHS (start_time, 12 * LEVEL) AS end_time

  id2

  FROM table_x

  CONNECT BY LEVEL<= months_between="" (end_time,="" start_time)="">

  AND PRIOR id2 = id2

  AND PRIOR SYS_GUID () IS NOT NULL

  ;

  I'm assuming that id2 is unique.

  Would what results you if end_time wasn't exactly N years after start_time?

• Query - remove duplicate records, based on the value of a field

  Hello
  
  
  Please view the information below,
  How to delete records when his number 0
  AND these records (name) repeat with count > 0
  

  existing data
  
   name                       loc                            count
  ------------------------------------------------------------------------
  
  aaa          a1          10
  aaa          a1          0
  bbb          b1          0
  ccc          c1          0
  dcc          d1          11
  dcc          d1          0
  
  required output
  
  ---------
  
  
   name                       loc                            count
  ------------------------------------------------------------------------
  
  aaa          a1          10
  bbb          b1          0
  ccc          c1          0
  dcc          d1          11
  
  
  
  remove these records -
  
  -----------
  
  aaa          a1          0
  dcc          d1          0

  Thank you.

  I guess that loc always matches the name. Thus, to find the lines of stay is just a simple group of

  with data as(
  select 'aaa' name,'a1' loc,10 count from dual union all
  select 'aaa','a1',0 from dual union all
  select 'bbb','b1',0 from dual union all
  select 'ccc','c1',0 from dual union all
  select 'dcc','d1',11 from dual union all
  select 'dcc','d1',0 from dual )
  
  select
    name
  , loc
  , max(count) cnt
  from data
  group by
    name
  , loc
  order by
    name
  , loc
  
  NAME     LOC     CNT
  aaa     a1     10
  bbb     b1     0
  ccc     c1     0
  dcc     d1     11
  

  to find that the other is just a minus

  with data as(
  select 'aaa' name,'a1' loc,10 count from dual union all
  select 'aaa','a1',0 from dual union all
  select 'bbb','b1',0 from dual union all
  select 'ccc','c1',0 from dual union all
  select 'dcc','d1',11 from dual union all
  select 'dcc','d1',0 from dual )
  
  select name,loc,count from data
  minus
  select
    name
  , loc
  , max(count) cnt
  from data
  group by
    name
  , loc
  order by
    name
  , loc
  
  NAME     LOC     COUNT
  aaa     a1     0
  dcc     d1     0
  

  would be a delete

  delete from data
  where
  (name,loc,count)
  in
  (select name,loc,count from data
  minus ..
  

  concerning

• Need to set the attribute of the current record based on the value of the next record

  With the help of forms 6, I have a form that displays the list of folders. There may be multiple records with the same ID, but with different expiration dates. I need set attributes for hilite only the record with the latest expiration date. The current list points of interest reviews of future expiration dates - but we found that, sometimes, the subscription is renewed before the expiration date has been reached, causing two records with the same ID with expiry dates in the future.
  
  I can (and do) sort the records by date of expiry and the identification for the record with the latest expiration date is always the last to this ID, so what I want to do is to check the next record to see whether or not it has a different ID. If the current record is the last expiration date, & must be hilited. Because I might want to hilite the current record, I can't simply navigate to another record, according to the description I found, what makes the next_record builtin. Anyone know how I can check for a value in the next record without making the current record?
  
  Thank you.

  What I would do:

  -Create a DB view based on your table and including the function call DRIVE as a separate column.
  -Base that block you on this point of view
  -If the block is modifiable, set the DML target for the block to your database table.

• Shaved measure based on the month level.

  Hello
  
  I defined a shaved measure at the "level of months."
  
  I expect to have an aggregate to the month level in the year.
  
  But there is evidence of aggregation of the month irrelevant year-round. For example in the data of four years, for the month of August, it shows the aggregation of the Aug-2010, 2009, 2008 and 2007.
  
  How can I get monthly globalization at the month-year level?
  
  The time dimension and hierarchy are based standard time dimension OWB.
  
  Thank you
  
  ~ Ash

  What is the feature of level key column for months in your time dimension?

  It should be of format YYYYMM, but not just mm...

• Deleting record based on the ID of the main table

  Hello
  

  SQL> desc news
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   NEWS_ID                                   NOT NULL NUMBER(14)
   NEWS_DATE                                          TIMESTAMP(0)
   SL_ID                                              NUMBER(2)
   HEADING                                            VARCHAR2(3120)
   DESCRIPTION                                        VARCHAR2(3900)
  
  SQL> desc news_location
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   NEWS_ID                                            NUMBER(14)
   COUNTRY                                            VARCHAR2(32)
   REGION                                             NUMBER(2)
  
  SQL> desc news_product
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   NEWS_ID                                            NUMBER(14)
   PRODUCT_CATEGORY_ID                       NOT NULL NUMBER(14)
   PRODUCT                                            VARCHAR2(27)
  
  SQL> desc news_service
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   NEWS_ID                                            NUMBER(14)
   SERVICE_ID                                NOT NULL NUMBER(14)
   SRVIS                                              VARCHAR2(16)
  
  SQL> desc news_info
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   NEWS_ID                                            NUMBER(14)
   SOURCE                                             VARCHAR2(203)
   ORIGIONAL_NEWS                                     VARCHAR2(3900)
   HEADING                                            VARCHAR2(3110)
  
  SQL> select count(*) from news where TO_CHAR(news_date,'YYYY') <  2012;
  
    COUNT(*)
  ----------
        8759

  I am trying to remove the news that are published before 2012, but the tables in detail consists the notebook of the child based on the news_id has been. Request certainly simple deletion will not work
  
  Please advise and thank you in advance

  Once again, I tell you, do not need ON DELETE CASCADE in the Delete query.

  Just use the Delete query like: -.

  delete from news where TO_CHAR(news_date,'YYYY') <  2008;
  

  And the child tables are deleted as a result.