Select Setup.exe.

Similar Questions

• After loading a CD for word 2007, that it does not run automatically, it shows the files and then I select setup.exe to launch

  Why the Autorun does not WORK? AutoPlay can be disabled? If so how can it be turned back on?

  It can be disabled or enabled. Why it is disabled for you now, I don't know, but here's how to reactivate it:

  http://support.Microsoft.com/kb/967715

  Scroll two icons Fix It. You can also do this in the registry, if you feel comfortable with that. The method is further down in the document.

  SC Tom

• I downloaded the installer of Firefox (Firefox Setup.exe), but it does not work.

  I had problems with Flash on Firefox so I decided to uninstall and reinstall Firefox.

  However, having downloaded the installer, when I try to run Firefox Setup.exe after extraction, he asks me if I want to run as the current user or change users (the current user is an administrator) and under the option I select, when I click on Ok, the box disappears and nothing else happens.

  I tried to download the installer again, but it's the same thing and I also tried to install an older version of Firefox, but exactly the same thing happens... I really hope someone can help! Thank you.

  Hello

  Also try a right click on the installer and run it as an administrator.

  Installation

• Satellite A300D - upgrade Vista - "Setup.exe has stopped working".

  Hello

  I use Satellite A300D with Vista and I tried to upgrade to Windows 7 using Toshiba upgrader.

  After the language selection and proceed to the other steps, it asks me to uninstall a bunch of programs. Some are uninstalled very well, but when it comes to four other programs he says "Setup.exe has stopped working" and it does not uninstall.

  I tried to uninstall the manually, but I got the same message.

  These programs are;
  Setup driver Atheros
  Toshiba hardware configuration
  Toshiba supervisor password
  Realtek High Definition Audio Driver

  So I can't go ahead with the upgrade.

  Anyone know what could be the problem?

  Thanks in advance,

  Pouvez - TR
  .

  Hello

  Anyboday tried to run the upgrade as an administrator? Therefore, click on the setup.exe file on the upgrade disc and run it as an administrator.

  Moreover I also upgraded from Vista to Windows 7, but in the manual supplied with the notebook, I founded the information, that it s to start the upgrade directly after a new installation of recovery.

  If you did a recovery facility before the upgrade?

  Welcome them

• Setup.exe stops

  I bought a new computer and printer. The printer is a hp Officejet 4620 wireless printer. I try to download the drivers for my laptop running Vista 32 bit home premium. After downloading the software, security asks me to move forward, what I do, and then I get a window indicating that Setup.exe has stopped and windows is looking for a solution. Once that stops, another window appears indicating that a problem because setup.exe to stop working and one I will be informed once a solution is found. Help!

  Hello

  Here is the HP information on your printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5191646&LC=en&cc=us&DLC=en&lang=en&cc=us

  And they read too.

  • Learn how to install a printer, what to select drivers and solutions to common installation problems

  • Need help with wireless? Visit the HP wireless printing Center!

  Alternatively, you can try to right click on the downloaded driver package > and then select run as administrator.

  See you soon.

• WRT400N setup.exe has stopped working

  I just got a HP Pavillion desktop computer new with Vista 64 and I have problems installing. Whenever I put the installation disc in the drive it does not load and I get an error message telling me that setup.exe has stopped working and will be forced to close. I even tried to jump the autorun and will my CD-ROM drive and manually select the file setup.exe. The initial splash screen appears and says please wait loading but I never have any more than that because the program crashes. I thought that maybe the drive was defective, but I tried it on a XP desktop and an XP netbook and the disk works fine on both. What gives? I searched this whole Forum and it seems I am the only person with this problem. My new defective computer or is it the user

  OK, so I finally understand for me. I did an exploring more of the disc and found a file named setup64.exe and TADAAAAA this file runs. But I still can't LELA to run but hey at least I have everything works now

• Turbo Tax CD setup.exe file not available in Explorer. CD is listed in the Explorer with an Apple on the drive.

  My Turbo Tax CD does not start automatically with the initial insertion in the CD player.  The CD is listed in the Explorer with an Apple on the drive.  The Explorer does not list the file setup.exe on the CD.  However, he lists a few other folders.  I use Vista to try to load the CD.  The CD does very well on my XP computer.  Is there a problem with Vista with the CD that are for MAC and Windows PC?

  Hi Undertaker Farmer,

   

  Welcome to Microsoft Answers Forums.

  • You get the error message?
  • What is the edition of Windows vista installed on the computer?

  TurboTax is a non-Microsoft program and we are not trained in this regard. However I will try my best to help you. Please, follow these tips and see if it works.

  As a work around you perhaps activate the AutoPlay for the CD and check if the auto play works.

  When you turn automatic playback, you can choose what should happen when you insert different types of digital media into your computer. For example, you can choose what digital media player is used to play CDs. When AutoPlay is disabled, you are prompted to choose what you want to do when you insert media files in your computer.

  1. Open AutoPlay by clicking the Start button, clicking Control Panel, on material and audioand then click AutoPlay.
  2. Do one of the following:
     • To turn AutoPlay on, select the Use AutoPlay for all media and devices check box.
     • To turn AutoPlay off, clear the Use AutoPlay for all media and devices check box.
  3. Click Save.

  You can also try to copy all the contents of the CD to the hard drive and try to install and check.

  You can also try to run the file Setup from the command prompt and check what is happening.

  Click Start and type cmd and press enter in the command prompt window type the following command : \setup.exe and press ENTER.

  See also the link below for the site of TurboTax on the requirements and check if your computer meets the condition.

  TurboTax 2008 system requirements

  http://TurboTax.Intuit.com/support/kb/installing/system-requirements/6389.html

  If fail steps above I would suggest that you contact TurboTax support for more options, see the link below.

  http://community.Intuit.com/QuickBooks

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setup.exe does not work on vista64 World Book CD of nas

  I am trying to install a hard drive Western Digital NAS World Book software on a vista 64-bit operating system.  I inserted the CD, double-click setup.exe, and nothing happening (get brief hourglass).  SELECT and Rt click setup.exe run as administrator has the same results.  This software CD worked fine on one of my XP systems.

  Thanks again.  Nothing in Event Viewer (I learned something about the viewer and that's a good thing).

  Contacted support of Western Digital (M - F only bankers hours).  It turns out that programs on the CD-ROM is not compatible with vista64.

  The research of their knowledge base on 'vista 32 64 bit' has a faq, saying that the product works with vista64.  No need to download different software.

  Will support.wd.com gave several icons of product to choose.  I chose the storage network (drive represents the drive of My Book World network storage) went to download piked global icon of the book and downloaded the installation software that does not work either.  TS had me all first choose the MyBook icon then took the same global icon of the book and downloaded the installer and it worked fine.

  There was a single element in the knowledge base data (software cd not compatible with 64 V go...) in response to a query of 64 bit vista it saved us a lot of time. Extremely poor web supported but the phone was very good (if you are a banker).

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Setup.exe has stopped working

  
  

  Hello, I am trying to install a driver for a "Turtle beach II Micro" usb sound card. Whenever I try to open the .exe file, I get the following:
  Setup.exe has stopped working
  
  
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  
  
  I deleted and redownloaded the file exe, rebooted, ran sfc and for the purposes of troubleshooting, I put this card its usb on another computer in Windows 7 (bridge) and the .exe charges very well, my Dell gives me this problem. Both are Win 7 Home Premium
  Any help or advice would be appreciated
  Thank you

  Hello Lousyshot,

  On the computer Dell, right click on the file setup.exe to the Turtle Beach Micro II and select 'run as administrator '.
  Does make a difference? You are using an administrator account when you try to install the sound card? »

  Did you check Event Viewer to see if there are errors on the installation failure?

  Please answer back with an update and let us know if it helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Installation file error - windows cannot find ' C:\Users\---\AppData\Local\Adobe\OOBE\PDapp\core\... \D6\... \D...\setup.exe'

  Whenever I try to install an adobe application, I get to the menu where you select the programs to install and install the location of the folder and when I click on 'install' an error saying "Windows cannot find ' C:\Users\[user]\AppData\Local\Adobe\OOBE\PDapp\core\... \D6\... \D...\setup.exe'".

  (I had a problem with windows 10 where it does not recognize the file extension in the file name, so if I could find the file, I might be able to solve the problem by renaming it to "setup.exe", but there is no such thing as the folder/file in question)

  

  Please try to remove Adobe Application Manager to help cleaning tool and try reinstalling the product. In case this does not work, please rename the OOBE folder from both the location after having removed Adobe Application Manager to try again and cleaning tool.

  • %LocalAppData%/Adobe
  • C:\Program Files (x 86) \Common Files\Adobe\OOBE

• No file setup.exe on elements dvd not first 11

  I have an embedded version of first 11 items free with my Canon 6 d.

  When I try to install, however there is no setup.exe file.

  I tried on two different Win 7 PC to without selected result with 'See the hidden files'?

  Any ideas?

  Thank you.

  Forget not sorry I come to realize I was on Mac drive!

• Try to reinstall using "setup.exe" in the setting of 64-bit Adobe PDF printing error?

  Greetings.  I found the following solution to my problem in the Adobe forums:

  http://helpx.Adobe.com/Creative-Suite/KB/error-file-adobepdf-DLL-needed.html

  The text is:

  Manually extract the 'adobepdf.dll_64' of the file data1.cab file before installing Acrobat. When the prompt appears, navigate to this file and select it.

  1. Navigate to the folder that contains the file setup.exe to your installation of Acrobat 8.
  2. Locate the file "data1.cab" and open it (sometimes it takes a third-party compression utility, such as WinZip, to extract the file).
  3. Inside the content list, locate the file "adobepdf.dll_64" and copy it to your desktop.
  4. Run the program setup.exe installation and when the prompt appears, select Browse and select the file that you copied to the desktop.

  Incredibly, my problem starts to #4.  How to run the installer?  I found both the command prompt and running the feature in the menu start (Yes, Windows 8, KMN).  Could not get one of them to run the installer, and I can't seem to find the .exe file in the directory.  Any help is much appreciated, thank you!

  The problem may be related to trying to install AA8 on Win8. You may, or may not be successful, or the entirely less successful. The first thing after installation is to open Acrobat and go to help > updates and install all updates (in the order if more than one appears, and repeat until no updates are displayed). You can also install the updates manually in the order using http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows.

  There is a good chance with AA8 that the printer driver is not installed. If this is the case, find a good color PS for a HP or other print driver PS printer. Install and change the name of the Adobe PDF printer. Check the ports - if an Adobe PDF port is present, select it and if not to change the port to the FILE.

  You should be able to print to the PDF printer to get a PS file. Open the file (the extension can be PRN) in Distiller to obtain a PDF file.

  The alternative is to buy the latest version of Acrobat (XI).

• Problem getting setup.exe file from Acrobat XI - using WinRAR extractor - "Windows cannot find a file... '.

  I downloaded Adobe Acrobat XI from my download of the University site (so I know it's a legitimate and safe copy).  When I run the .exe file, even if an administrator, he begins to extract using WinRAR archive self-extracting and stops with an error pop-up windows:

  «Windows cannot find «C:\Users\UserName\AppData\Local\Temp\RarSFX0\Adobe Acrobat XI\setup.exe»»

  I scanned using Malwarebytes, AVG, Spybot and run a \scannow command.  Nothing is a corrupt file.  Any ideas what might be causing the extractor does not work?

  I am running Windows 7 on a Dell 64 bit laptop.

  SOLUITION - I had to actually download a version of WinRAR Extractor.  Right click on the file AcrobatXI - Windows.exe downloaded and choose "Open with WinRAR" (this option was not available until I downloaded the WinRAR application - apparently the extractor runs automatically, but does not have full functionality).  Then I nagivated in the Adobe Acrobat folder in the WinRAR window selected the setup.exe file to run.  It has open and installed beautifully.

• Trojan found in Downloads/setup.exe. Help!

  Hello. I run a MacBook 2013 end Pro 13 "retina screen. Recently when parsing with Bitdefender and Protection of the Panda, my computer found a file in my downloads/setup.exe called 'Dropped.Trojan.Generic.13072660 '. Should I be concerned? Do I need to take action? Thank you!

  It's a false alarm or Windows malware. No one can hurt you, and you don't need to do anything. Just do not pass to someone else.

  You have no need to do is get rid of the software "anti-virus" (AV). All these software are worse than useless.

  Malware Windows is so widespread that you must assume that it is in each attachment until proof to the contrary. If you are just curious to know if a file is recognized as malware by the AV engines, you can download it from the "VirusTotal" site, where it will be tested against most of them. I do not recommend doing this with a file that may contain private information. A negative result is no evidence of anything either, because the AV software is not reliable.

  Never leave any AV software remove or 'quarantine' send messages or attachments. This will damage the messaging database.