Select the encoding then make sure readable document

Similar Questions

• "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. »

  I have a Windows Vista laptop. I usually have no problem printing over the network to my University Library. Then I bought a new Kodak printer to my apartment which I also configured to print wireless. For about a day, I could print from these two networks, depends on the location. Now, I can't print at the library. I am able to see all printers but when I try to 'Connect', it says "Windows cannot connect to the printer. Make sure you typed the name correctly and that you are connected to the network. "Word, printers of the University Library no longer appear in the list you choose to print. What should I do?

  Hello Lauren,

  Please take a look at this Microsoft article on "networked printer troubleshooting:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  I suggest to disable all security software, including firewalls, you have probably enabled or installed and then try to print again to see if that makes a difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

• on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to run the audit files system analyses on the computer. You can check the link for the procedure: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Error 1907. Can not save the fonts. Make sure you have sufficient permissions to install fonts.

  Original title: Windows 7 Installer error 1907

  How do I fix this"error 1907. Can not save the fonts. Make sure you have the necessary permissions to install fonts

  Hello

  
  1 does with a particular font or it occurs with all fonts?
  2 is this problem limited to the installation of fonts?
  3. you are an administrator of this computer?
   
   
  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• In the Powershell script execution error: could not find the type [ordered]: make sure that the assembly containing this type is loaded.

  People,

  I am trying to load and run the PowerShell script of PowerCLI Module to check the CPU, memory and storage overcommitment. VMware PowerCLI Blog - VMware Blogs but somehow it is always stopped with the error: cannot find the [ordered] type: make sure that the assembly containing this type is loaded.

  Here are some of the diagnostic result:

  $PSVersionTable

  Value name

  ----                           -----

  PSVersion 2.0

  PSCompatibleVersions {1.0, 2.0}

  BuildVersion 6.1.7601.17514

  PSRemotingProtocolVersion 2.1

  WSManStackVersion 2.0

  CLRVersion 4.0.30319.1026

  SerializationVersion 1.1.0.1

  Get-ChildItem ' HKLM:\SOFTWARE\Microsoft\NET frame Setup\NDP'-recurse |

  Get-ItemProperty-name of the EA - 0 Version |

  Where {$_.} PSChildName-match ' ^ (?) (S) \p {L} "} |"

  Select PSChildName, Version

  PSChildName Version

  -----------                       -------

  v2.0.50727 2.0.50727.5420

  3.0.30729.5420 v3.0

  Windows Communication Foundation 3.0.4506.5420

  Windows Presentation Foundation 3.0.6920.5011

  3.5.30729.5420 v3.5

  Customer 4.0.30319

  4.0.30319 full

  Get-PowerCLIVersion

  PowerCLI Version

  ----------------

  VMware vSphere PowerCLI 5.8 Release 1 build 2057893

  ---------------

  Versions of the snap

  ---------------

  Build VMWare AutoDeploy PowerCLI component 5.5 1983942

  Build VMWare ImageBuilder PowerCLI component 5.5 1983942

  Build license of VMware PowerCLI component 5.5 1265954

  Build VMware Storage PowerCLI component 5.8 2057894

  Build VDS's VMware PowerCLI component 5.8 2031581

  Build VMware vSphere PowerCLI component 5.8 2031581

  I installed Windows6. 1 -KB2819745- x 64 - MultiPkg.msu to enable Powershell v4.0 on my Windows 7 laptop, but still the script cannot be executed with the above error message.

  Any kind of aid and assistance would be greatly appreciated.

  Thank you

  Hello-

  Ah, yes--it is that review.

  Another option, because you are not able to go to .NET FX 4.5, is to remove the parts "[ordered]' of the code that you use.  This type Accelerator makes the hash table a dictionary sorted.  The effect to remove that from the code will be that the properties of the object that results will not be in the order in which they appear in the code.

  And, another option would be to install PowerShell v3 (the version in which the '[ordered]' feature has been added').  That shouldn't require a FX .NET newer than what you showed as having already installed on this computer.  However, as we have seen with the PSSnapin and PSv4 Exchange, you want to make sure that the PSSnapins / Modules you want to use are compatible with PowerShell v3.

• Could not load or run 'pythizer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  I get this error "could not load or run 'pythizer.exe' specified in the registry." Make sure that the file exists on your computer or remove the reference to it in the registry. Whenever I turn on my computer. I found and deleted the file, but this error keeps coming back. HELP ME PLEASE!

  The Startup tab looks like the registry.
   
  Try this utility that searches in less common places
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx?ppud=4
   
  Maybe another program trying to start pythizer.exe that is not a
  message we get from booted windows of programs.
  --
  ..
  --
  "Jonny G" wrote in message news: 2a8f4e05-44-cf-480C-8056-7e895939c845...
  > No go I'm afraid. Doesn't seem to be in the start menu. Is there a way
  > watch the "registry"?
   
   

• When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.

  When I try to install v.6, CD or as copied photoshop folder on the desktop, the installation stops with "Error1310-error to write to the file. Make sure you have access to this directory.

  Please see:

  Error "1310: error writing to the file: C:Config.Msi...» » | CS4 products

  I hope this helps.

  Greetings

  Megha Rawat

• Unable to connect to the bluetooth mouse "make sure that your mouse is still detectable.

  Original title: Bluetooth mouse

  I have an of travel Dell WM524 wireless mouse that uses bluetooth 3.0, but I had to reset my computer and after I did I can not connect my mouse. I try to add the device to bluetooth devices and it seems, I select it and click Next, and then he said: "that has not worked. Try again and make sure that your mouse is still detectable." My mouse is right by my laptop and I'm under window 8. All solutions?

  I had the same problem but I found the fix after weeks and weeks of searching, note this work only if you are running windows under bootcamp or dualboot with other os

  all he need do is désapparier the Bluetooth on any other place you have paired it with.

  for me am running windows under bootcamp and I had my bluetooth mouse and a bluetooth keyboard paired under osx.

  Once again, if you have the device paired to another operating system via bootcamp or dualboot please disable pairing it.

  "instruction".

  1. remove the battery of the device

  2. turn off windows and log in other os

  3. Remove/désapparier the bluettoth device

  4. If you have mac os remember to do the following

  "Click OK on top of your mac, click on go to folder, type the following ' com./Library/Preferences/com'", delete this file, turn off Bluetooth and now restart in windows ".

  tadáaáá I hope this helps someone :)

• Hi, I seem to do the right thing to try to use kidnapping Spot to remove a few shadows around a photo portrait. But once I have select the Destination, then the Source by dragging the circles that nothing seems to happen. How to apply the Source?

  Use Clone. Opacity = 100%.

  THX

  Rishi

  Make sure you have selected "Clone" with opacity

  Click place tool once to the region of "Destination".

  Move the other circle on the 'Source' box (the key "/" automatically selects the other areas)

  Click on 'done '.

  

  You are doing a difficult job for Lightroom! This type of editing is best done in Photoshop.

• Unable to write the email in the box to the letters. Make sure the file system allows write privileges, and you have enough disk space to copy the mailbox.

  How to make sure the file system gives me write rights? This started last night on my Dell desktop running Windows 10, I also a Dell laptop running Windows 10 and my emails come on it without any problem, but the Office of my home computer is so I need to get my emails on this work. Please answer as soon as POSSIBLE with everything you might need me

  you have an anti virus? try to turn it off.

• Why the app for iOS is not a 'back' button? You must select the House then my documents all the time just to open another form of file in this folder. If there is a back button that would save a lot of time for iOS users.

  Hello

  Comes from Acrobat Reader for iOS 15.1.0 version which includes support for a previous button in the top bar.

  Do you want to give it a try and tell us what you think?

  Thank you.

• Help: SQL to select the closest points within groups of documents grouped by hour

  Hello
  I need help to find a SQL for an effective solution to the following problem:
  -J' have 20 buses circling on a bus line and their locations are reported every 10 seconds and recorded in a table space 'bus_location' with 'bus_loc' as the SDO_GEOMETRY type.
  -Location of bus each record there is a column msg_datetime with the time when the position has been saved.
  -Bus circle the the bus route 8 to 12 times, from A to B, then b back to A, then new loop from A to B and so on.
  -J' have 3 points of synchronization in the spatial table "timing_point" with "tp_loc" as the SDO_GEOMETRY type.
  -A bus will pass each timing point 8 - 12 times in one direction and 8 - 12 times the other way, while making the loops on the road to the bus.
  
  My task is: for each timing point, every bus, (A - B or B - bis), find nearest bus for each direction of travel place to this timing point.
  
  Example:
  Bus... * TimingPoint *... * time *... * Distance *.
  ...........................................*between*
  ...........................................*bus and TP*
  12......A................ 14:01, 250 m
  12......A................ 14:01:10... 150 m
  12......A................ 14:01:20... 12 m < == it is closest to the TP for this pass
  12......A................ 14:01:30, 48 m
  12......A................ 14:01:40... 100 m
  12......A................ 14:01:50... 248 m
  12......A................ 14:29:40, 122 m
  12......A................ 14:29:50, 72 m
  12......A................ 14:30... 9 m < == it is closest to the TP for this pass
  12......A................ 14:30:10... 10 m
  12......A................ 14:30:20... 12 m
  
  I tried to use SDO_NN, and I just can't close bus locations, but how do I find the location of bus closest to each passage? Or how to identify a location of bus groups who are together in 2-3 minutes and find the record closest to each of these groups of locations?
  I thank very you much for any help.
  
  Milan
  
  Published by: mburazor on February 9, 2012 14:41

  Milan,

  Yes, the problem is one of the non-space analytical. Here's another GB, which should be independent of the year/month/date/hour/minute
  as it does all its math based on an absolute number of minutes since 1970. I turn to 5 minutes but you could round/trunc at all
  interval (5 minutes, 10 minutes, 15 minutes, etc.)

  Note that I have created additional folders in the same table I built. (Tip: good idea to provide an example of dataset on the forum when)
  ask tough questions of SQL like this).

  drop table buslocns;
  
  create table buslocns(
  busno number,
  timingpt varchar2(1),
  pttime   timestamp,
  distance number)
  ;
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:01:00','YYYY/MM/DD HH24:MI:SS'),250);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:01:10','YYYY/MM/DD HH24:MI:SS'),150);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:01:20','YYYY/MM/DD HH24:MI:SS'),12);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:01:30','YYYY/MM/DD HH24:MI:SS'),48);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:01:40','YYYY/MM/DD HH24:MI:SS'),100);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:01:50','YYYY/MM/DD HH24:MI:SS'),248);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:29:40','YYYY/MM/DD HH24:MI:SS'),122);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:29:50','YYYY/MM/DD HH24:MI:SS'),72);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:30:00','YYYY/MM/DD HH24:MI:SS'),9);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:30:10','YYYY/MM/DD HH24:MI:SS'),10);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:30:20','YYYY/MM/DD HH24:MI:SS'),12);
  
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:59:40','YYYY/MM/DD HH24:MI:SS'),53);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:59:50','YYYY/MM/DD HH24:MI:SS'),28);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 15:00:00','YYYY/MM/DD HH24:MI:SS'),12);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 15:00:10','YYYY/MM/DD HH24:MI:SS'),73);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:44:40','YYYY/MM/DD HH24:MI:SS'),53);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 14:44:50','YYYY/MM/DD HH24:MI:SS'),28);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 15:45:00','YYYY/MM/DD HH24:MI:SS'),12);
  insert into buslocns values (12,'A',to_timestamp('2012/02/10 15:45:10','YYYY/MM/DD HH24:MI:SS'),73);
  
  commit;
  with tensOfMinutes as (
  select row_number() over (order by busno,timingpt, pttime) as rid,
         busno,
         timingpt,
         pttime,
         round(((cast(pttime as date) - cast('01-JAN-1970' as date)) * 1440) / 5) * 5 as mins,
         distance
    from BUSLOCNS
  )
  select busno,timingpt,to_char(to_date('01-JAN-1970','DD-MON-YYYY') + ( mins / 1440 ),'DD-MON-YYYY HH24:MI:SS') as pttime,minDist
    from (select busno,timingpt,mins,min(distance) as minDist
            from tensOfMinutes a
           group by a.busno, a.timingpt, a.mins
           order by 1, 2, 3 ) ;
  -- Result
  --
  BUSNO                  TIMINGPT PTTIME               MINDIST
  ---------------------- -------- -------------------- ----------------------
  12                     A        10-FEB-2012 14:00:00 12
  12                     A        10-FEB-2012 14:30:00 9
  12                     A        10-FEB-2012 14:45:00 28
  12                     A        10-FEB-2012 15:00:00 12
  12                     A        10-FEB-2012 15:45:00 12
  

  concerning
  Simon

• By selecting the radio button makes the required field

  (Actually two similar questions but...)

  • I have a set of option buttons.  When the 'B' button is selected, I need the field text "T" to become "required".  If the user changes her mind and chooses another button or the form is reset to the "T" field does not show being "necessary".
  • The form also has a set of check boxes that, once again, when 'C' is checked, I need 'F' text field to become "mandatory" (or not if the box is unchecked).

  Help with the script for these is appreciated.

  Oh! It's a bit simpler:

  Custom calculation script

  Event.Target.Required = getField("radio1").valueAsString = 'B ';.

• Operation error 0 x 00000709 might not be compled, check the name of the printer and make sure printer connect to network - set the default printer

  PRINTER IS SHARED ON THE NETWORK AND YOU WANT TO SET AS THE DEFAULT PRINTER...

  My Hp Deskjet 3550 Printer I have server with Windows 7 32-bit, 64-bit client

  I was first installed the printer in my client and work and shared what this wireless client PC...

  more later connected (shifted) this printer to the server and shared and want to access the client, now client pc has two settings of the printer, 1 direct connect 1 network share and I want to set default network setting... but displays error 0 x 00000709 as above. (successful print test)

  Print network image printer is displayed,

  but print the word, excel, pdf just placed directly the visible with fax and xps viewer.

  -default even impossible to define to the xps Viewer or by fax.

  Please suggest me the way out?

  Hi Amit,

  I suggest you to send your request in the TechNet Forums to improve assistance in this regard. Here is the link: http://social.technet.microsoft.com/Forums/en-US/home?category=w7itpro&filter=alltypes&sort=lastpostdesc

  It will be useful.

• problem encoding with word and pdf doc - error message - file conversion - Select encoding to make your document readable

  Hi, until an hour ago, I had no problem opening documents adobe, or word documents, however, when I try to open a pdf document is opened correctly, I have to save it, and then open with adobe, when I try to open the Word document of display of the error message - file conversion, select the encoding that makes your document readable? help please how to do everything back to normal?  I think I caused the problem when I tried to open a Word / PDF of my removable flash drive, can someone please tell me how to solve this problem, without a questionable download?

  Can I save as and then open with - and pdf opens the file - but before that I didn't have to do it just opened automatically

  Thank you.

  J

  I just stumbled upon this problem there is, it's an easy solution to calm. If it's a .pdf to locate the file right click and select open with, then choose program select by default, choose the adobe reader software. What it does for each .pdf file it will use adobe reader instead of trying to use the wrong program to open the file. Same thing with .doc and .docx files only instead of adobe reader choose microsoft word