problem encoding with word and pdf doc - error message - file conversion - Select encoding to make your document readable

Similar Questions

• Problems with word and PDF after computer crash. Error "user has access privileges."

  Problems with word and PDF after crash

  My computer crashed and I had to run the recovery disk, the repair option, so he could run again. It does not format my computer but I had to re - install several programs. I reinstalled my copy of office for example.  I have an external hard drive where I put most of my files but since installing the recovery disc, it does not open some Word documents and gives a message error "user has not access privilege." It's the same thing with some pdf files. What can I do?  Please help because I can't open some of my documents from the University.

  Hello world
  I would like to just say thank you for your help and the problem is now solved.  In the end I paid someone to sort it out.  He explained that it was something like permissions for some of my files were owned by my old operating system and after that my computer crashed and I had to put through the recovery disc these permissions have been lost.  He told me that he had a program that looked for the old existing and re-installed.
  Thank you.

• XP Home Edition. Click on "Finish" to complete the backup or Restore Wizard and get the error message "file of the recovery diskette could not be created. The operation has been aborted. "Impossible to correct the error. Any Suggestions?

  Follow the instructions in MS, but is unable to perform a backup.

  Hello

  You can follow this link and check if the problem persists.

  An Error Message appears when you try to use the Automated System Recovery Wizard

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Storage of MS-Word and PDF documents in the database that is downloaded through APEX

  I want to enable users to download MS-Word and PDF documents that they created / edited outside of the app to the APEX for storage in the database with other data in the app.
  
  I know that I should use a queue item browse an area for this purpose.
  I have a few questions:
  1. what type of database data is best for storage of MS-Word and PDF docs? CLOB?
  2. How can the user see that the file has been downloaded? In other words, how can they see the name of the file has been downloaded? I want to show this on the page for later viewing. I downloaded a document, but later, I have no way to see that the document has actually been downloaded. On the page of the APEX, the browse file evidence not whether or not a previously downloaded file.
  3. how the user can download the previously downloaded?
  4. is there a way to give users the ability to edit a document in an APEX application where they can do the editing of type MS-Word (the font size, type of font, bold, italic, etc.)?
  
  I know I ask myself a lot here and I appreciate your comments.
  -Reid

  In my case, I am downloading screenshots of my application and then display them. You can feel free to use it if you want, the code has been taken for most examples of downloads of files sent by others. Here is a code to help you get started:

  Description Table file

  CREATE TABLE FILE_UPLOAD
     (name           VARCHAR2(4000) PRIMARY KEY,
      subject        VARCHAR2(4000),
      id             NUMBER,
      blob_content   BLOB,
      mime_type      VARCHAR2(4000),
      PAGE_ID        NUMBER);
  

  How to download file

  IF ( :P20_FILE_NAME is not null ) THEN
       INSERT INTO FILE_UPLOAD (id, NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE, PAGE_ID)
        SELECT ID,:P20_FILE_NAME,:P20_SUBJECT, blob_content, mime_type, :P20_PAGE_ID
              FROM APEX_APPLICATION_FILES
              WHERE name = :P20_FILE_NAME;
     DELETE from APEX_APPLICATION_FILES WHERE name = :P20_FILE_NAME;
    END IF;
  

  Download Image definition of the procedure

  CREATE OR REPLACE PROCEDURE download_my_file(p_file in number) AS
          v_mime  VARCHAR2(48);
          v_length  NUMBER;
          v_file_name VARCHAR2(2000);
          Lob_loc  BLOB;
  BEGIN
    SELECT MIME_TYPE, BLOB_CONTENT, name,DBMS_LOB.GETLENGTH(blob_content)
           INTO v_mime,lob_loc,v_file_name,v_length
      FROM FILE_UPLOAD
     WHERE id = p_file;
      --
      -- set up HTTP header
      --
      -- use an NVL around the mime type and
      -- if it is a null set it to application/octect
      -- application/octect may launch a download window from windows
    owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
  
      -- set the size so the browser knows how much to download
    htp.p('Content-length: ' || v_length);
      -- the filename will be used by the browser if the users does a save as
    htp.p('Content-Disposition:  attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
      -- close the headers
    owa_util.http_header_close;
      -- download the BLOB
    wpg_docload.download_file( Lob_loc );
  end download_my_file;
  /
  

  don't forget to grant rights of procedure for the use by any person

  GRANT EXECUTE ON download_my_file TO PUBLIC
  

  Display Image definition of the procedure

  create or replace PROCEDURE "DISPLAY_IMAGE"
  (
    inID NUMBER
  )
  AS
    vMIME VARCHAR2(48);
    vLENGTH NUMBER;
    vFILENAME VARCHAR2(2000);
    vBLOB BLOB;
  BEGIN
    SELECT MIME_TYPE, BLOB_CONTENT, NAME, DBMS_LOB.GETLENGTH(BLOB_CONTENT)
      INTO vMIME, vBLOB, vFILENAME, vLENGTH
    FROM FILE_UPLOAD
    WHERE ID = inID;
    owa_util.mime_header(nvl(vMIME, 'application/octet'), FALSE);
    htp.p('Content-length: ' || vLENGTH);
    owa_util.http_header_close;
    wpg_docload.download_file(vBLOB);
  END;
  /
  

  Again, ensure that everyone has rights to execute the procedure.

  GRANT EXECUTE ON DISPLAY_IMAGE TO PUBLIC
  

  This does not create an editor in the browser, it simply creates a process simple upload/display. For a WYSIWYG editor that manages the PDF format or doc, you need something much more sophisticated, and I can't propose something here.

• during the conversion of several Word and Excel docs in a combined PDF file random pages have blue background in the final PDF file.

  I have a user using Acrobat 10. It has been installed two weeks ago and had no problems at the start. Today, she said that when she tried to convert several word and excel docs by selecting and right-click on it to select convert/combine PDF format, pages randomly in the finished PDF file have a blue background. I did some research online and you can't find any information on this problem. Can anyone here shed some light on this subject and maybe point me in the direction of a solution? Any help is appreciated. Thank you!

  Hi Gilad,

  So something I didn't consider was that it could be a setting in office documents. The reason why I do not consider this was cause we tested several docs and had similar results each time. I returned and examined this possibility and found a setting in word that was causing this problem. Although the word doc showed no color page when opened in word, if I went to the "Page Layout"-> 'Color of Page', a shade of blue was chosen. By selecting "no color", then convert / combining documentation in PDF format, we have achieved the desired result. Thanks again for your response!

• PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = NEW WINDOW (RES) PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!

  Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64

  Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3

  Fisico processore Conteggio: 6 Velocità processore: 3214 MHz

  PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW

  PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!

  Hi biagiob,

  Seems that the operating system is obsolete.

  Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements

  Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)

  Kind regards

  Claes

• I want to go back to the previous version of 2014.2.  .3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  2014.3 is far too buggy and full of error messages. Create problems because I'm on a timeline with my client and I don't have time to fool around with all the problems.

  You don't mention what you have encountered errors? Workaround for the problem more frequently reached here is Re: error in Muse: object UID:U6875 has two (or more) owners: U3633 and U3165

  If you have a copy of your .muse file that has not been saved by using 2014.3, you can downgrade by uninstalling Muse, and then choose the previous Version in the drop-down list of filters in the Panel of Apps from the desktop creative cloud application. There will be a popup next to the Muse, where you can select a version prior to install.

• can I sync my microsoft word and PDF files on my palm?

  I'm new to the family of Plam and I have a question.  I use my Palm for bussiness because I can't do most of us, but can I sync my microsoft word and PDF files in my Palm?

  I use the contract all the time and I need to show a contract from time to time, I don't know how to synchronize those files on my palm... is the windows mobile palm?

  If I could get as much information as possible on all the how of that would be great!

  Thank you and I have a lot of aprecaite it!

  Paul

  Hey Paul, welcome to the forums of Palm.

  Your Verizon Pre Plus runs a mobile operating system called webOS HP/Palm.  The current version is the 1.4.5.  The phone can connect to a Microsoft Exchange Enterprise Server.  When this happens, it uses a timing called "Exchange Active Sync" technology, but your phone does not have the operating system Windows Mobile or Windows Phone.

  Synchronization of Microsoft Office and PDF documents from sort of an adventure the Pre debuted more than 18 months ago.

  DataViz, the application of the notice of Doc officials, was partially acquired by RIM, the fact of BlackBerry and decided to not release a full version of Documents To Go for webOS devices.  Palm in collaboration with manufacturers of QuickOffice to provide the full support of the office for webOS documents in the future.

  For now, if you put Office and PDF documents in the area of storage USB of your pre, see Doc or PDF is to find them and allow you to view them on your Pre.  I put all my documents in a folder simply called 'Documents '.

  If you connect the charging/sync cable for your pre and then attach to your Mac or Windows PC, you will have a choice to activate the USB Drive mode.  When you do, you will be able to work with your pre as you would with a standard USB.  Eject the meadow of your desktop PC when you have finished and you should be ready.

  Hope that helps.

  Alan G

• I have previously a POWER1) product allows me to digitally sign a PDF document? (2) convert a word to PDF doc?

  I have previously a POWER1) product allows me to digitally sign a PDF document? (2) convert a word to PDF doc?

  Hi robertb48724220,

  I checked your account. You have an active subscription to Adobe PDF package, which allows you to convert files to PDF format, both signing (the fill & sign on Acrobat.com does not require a subscription). You can access your account at https://cloud.acrobat.com/. Just sign in with your Adobe ID and password.

  Please let us know if you have any additional questions.

  Best,

  Sara

• Problems to show the driver IVI and property loader error messages when you use a type of operator interface

  I use UI operator (programmed in ICB, with asynchronous timer) in the folder OP1 in attached zip file. This operator interface does not have the error message from the driver of the IVI, properts, charger etc. on the screen (messages as in the photo attached error.jpg in zip file attached). Due to stability problems, I use this operator interface, but I need these error message. One other operator interface is OP2 in attached zip file. This operator interface puts the error message from the driver of the IVI, charger properts... on the screen (messages as in the photo attached error.jpg in zip file attached). Now, I want to have this feature with OP1 for reasons of stability I use OP1. How can I implement this in OP1? I tried and tried a lot of time, but I have not found a method to implement this. can someone help me? Thank you kind regards Samuel

  Hello, Johann,.

  I'm not sure you understood my problem. My problems are not the IVI and loader drivers error messages property! But my problem is, that errors of the IVI drivers and property loader operator interface does not bring on the screen. So to test this situation, cause an error of the driver of the IVI or shipper of property, then you can see that with a PC, you have an error message and with another IO no error message takes place and the test of stocks without a message. Do you know why this OI does not show the error messages and how showing the error message can be implemented in this operator interface

  concerning

  Samuel

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• Outlook Express 6 problem: send an email I get an error message and the email is not put in the sent items folder

  Outlook Express 6, Windows XP SP 3

  Problem: send an email, I get an error message and the email is not put in the sent items folder while the email (and attachments, if any) are successfully delivered to the recipient.

  The full error message is always useful, but I'm sure you have damaged dbx files.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two in

  Two days ago, I downloaded Adobe Acrobat update for mac desktop. It is registered with Adobe and watch on my account, such as registered. I try to open and get the error message "you are not connected to the internet or your clock is wrong" are all two inaccurate statements. I GET NOTHING BUT NOTHING ADOBE 'SUPPORT '.  How can I get just the program open and running?

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone unusable because it requires a more recent version of the air.  can anyone help?

  I try to sync a new phone 6 s with tunes11.4 and receive an error message saying that the phone cannot be used because it requires a newer version of itunes.  I've updated the phone and itunes.  can anyone help?

  Sorry, iphone and itunes.

• I just opened my Acrobat 9 Pro and received an error message indicating that my license had expired with number (148: 3). What is c?

  I just opened my Acrobat 9 Pro and received an error message indicating that my license had expired with number (148: 3). What is c?

  Restart your flexnet licensing service, http://techie-buzz.com/how-to/fix-adobe-error-code-148-3-licensing-issue.html