Select the USB on PowerEdge R515 transfer

Similar Questions

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW

• due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted. Cannot synchroni

  due to lack of space on my HARD drive, I moved Photoslibrary to a USB port. When I connect my iPhone 6 I am able to transfer photos from my phone to the PhotosLibrary on the USB port, but when I sync, photo library is not get highlighted on the USB port. Cannot synchronize.

  Hello, manoj0910.

  Please visit Apple support communities.

  Looks like you can't synchronize the pictures located on your external drive.  I need a little more information about your configuration to provide a better answer.  However, we will try to sync your photos through the section of the file through the article below.  You just need to direct iTunes to where your photos are stored on your external drive.

  If your photos are in a folder

  1. Select "Choose a folder" from the context menu.
  2. Choose the folder where you store your photos.
     
  3. Click on apply.

  You can arrange photos in subfolders to create photo albums.

  Sync photos from your computer to your device iOS through iTunes

  See you soon

• How I choose the USB-6251 (full speed or high speed) data transfer rate?

  Hi, this is bose, FAE Samsung in Korea.

  I saw the USB-6251 specifications that it transfer data at high speed or full speed.

  How can I select speed mode?

  It depends on computer?

  Thank you.

  Fairly certain, it is totally dependent on the USB hub.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• Is there a file management utility availabe for transfer files from Iphone to PC using the USB connection or wifi? Thank you

  Is there a file management utility availabe for transfer (image) files from Iphone to PC using the USB connection or wifi? Thank you

  You should be able to synchronize with a compatible Picture Manager, but you can also see the TouchCopy application.

• Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord...

  Menu to transfer the photos on my memory card does not appear, is there another way I can do?... Without using the usb cord... He lost. :/

  The following steps may be worth a try:

  Insert your memory card into your Media Player...

  Reach... Start / computer...

  What is the memory card show as a drive letter? (if your Media Player)
  has several slots, there will be several "hard drives" listed... the
  SD card will be one of them)

  If_Yes_right click on the drive letter correct and in the menu... Choose...
  Open... now you should see the directory of the memory card or to explore.

  From there you should be able to drag and drop or copy and paste the
  files in a folder on your hard drive.

  Also... the following items may be worth a visit:

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

• With the help of Windows Easy Transfer - need to transfer the old HARD drive to new computer - old HDD attached as external drive for the new usb port of the computer - help

  New computer installed Windows 7 and gave me an option to use Windows easy transfer to transfer files, data, programs, etc. from my old computer.  All I have from the old computer's hard drive; a lightning strike fried either food or his mother by car.  I have attached the hard as a disk to the new computer using the usb cable provided with the external hard drive case.  It is recognized as drive E: on the new computer.

  Trying to follow the instructions given by the Windows Easy Transfer software.  Get the software/folder from the old hard drive (drive E), but trying to run the software that I can't seem to do anything on the old disk.  When asked what is the former or the new computer - I respond to old, but no new file is created for the transfer.  When I answer again, a new file is created on the new computer (rather than the old HDD) and then he transferred again to new.  I can't create a file of whatever it is I want to transfer from the old HDD.

  I can't use an easy transfer cable because the old computer does not only the hard drive.  I can't connect to a network for the same reason.  I only have the hard that I can attach to the new computer.  But I can't get the new computer to process the old hard drive separately for transfer purposes.  The only other option I can think of is to attach the old HDD to another computer, and then try to run the software in this way, but I don't want just the stuff on the old hard drive a copy to the other computer.

  Can anyone help?  Suggest how to get the old hard drive files, data, transferred etc. to the new computer.  What are the steps?

  Thank you.

  Do yourself a favor, with the old drive connected externally, in the browser, simply copy the data files to the location of Documents of the PC win7. You can not copy programs, they need to be reinstalled from media origonal. You can copy all the downloaded files instalation

  You may need to take possession of your old documents folders - see win help to find out how

• Transfer of data to my laptop via the USB port has ended

  Data transfer to my laptop (digital scale) via USB ends with the following message in the software scales: "an error occurred during the transfer of data, the device must be reconnected.  As this took place (worked before), can this be a problem with Windows Update?

  Hi Pahov,

  1. don't you make changes to the computer before the show?
  2. the problem occurs with any particular file/USB?
  3. What is the brand of USB?

  This problem may occur when there is a lot of traffic on the USB 2.0 hub, and you transfer files to a USB device or a low speed full speed. The problem does not occur when you transfer files to a USB device at high speed.
  Method 1: I suggest you try the steps from the following link:

  Problems may occur when you try to transfer files to or from a device is connected to a USB 2.0 hub
  http://support.Microsoft.com/kb/908673/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  Method 2: I suggest you try the steps from the following link:

  How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume
  http://support.Microsoft.com/kb/953367/en-us

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

  See also the link: Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps. Let us know if you have other problems with Windows in the future.

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator

  I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator... also not able to remove all the data from USB key

  Good so take a look here

  Run the FixIt first, then if that doesn't work, see these topics:
  • Faulty, misconfigured or missing device driver
  • Out-of-date firmware or BIOS
  • Incorrectly configured root hub
  • Remove and reinstall all USB controllers

• Read mkv files to the USB drive on a dvd transfer

  I have a lot of videos and recordings on Sandisk Cruzer mkv format tv blades. I want to transfer them to dvd using a conversion program loaded on my laptop Dell Inspiron 5520. Problem is that when I connect the USB, the format is not recognized, and reformatting suggests that would erase the info! Y at - it a program that can get my laptop to accept the file mkv to convert and burn to dvd?

  Hello

  Please keep us updated.

  I would ask to refer to suggestions provided by Barb Bowman replied on 2 January 2013 and verification.

  Important: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software Internet.

  I hope this helps. Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Unable to transfer photos from phone to the computer using the USB cable

  I went to Radio Shack, showed them my cell phone and asked what USB cable would transfer my photos from the phone to the laptop. What do I need to achieve this. I bought the USB said would work but I connected my phone to laptop and nothing happens even if I was told that he'd tell me what to do. Help!

  Hello Sheryl,

  Thanks for your reply.

  I understand that need makes feel you upset and we will try to fix this problem for you.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  • Do you get error codes/messages when you try to transfer pictures from the phone to the computer?

  • What is the brand and model of your mobile phone number?

  I suggest try to connect the phone to a different USB port and check.

  You can also try to connect the phone to another computer and check if that helps.

  Answer us with the results above steps help you to solve the problem.

  You can also view the article below

  Import pictures and videos from a camera, phone or DVD

  http://Windows.Microsoft.com/en-us/Windows-8/import-photos-videos

  Get back to us with the results. We would be happy to help you further.

  Thank you

• USB 3.0 port select the pen drive, but does not allow to load mobile

  Hello

  I have acer Aspire V3 - 471G laptop with usb 3.0 port. In this port, it says usb charging device

  the manual also says it can charge when connected to the laptop via a usb port.

  If I insert the USB key, it allows to use, but when I connect the mobile to laptop using data cable the mobile isnot responsible... Why? Please help me... I m in prblem... I think that usb 3.0 is not damaged but not chargin... makes me using trouble.please! 11

  If the USB 3.0 port sees the other USB devices correctly, we know that the USB port works correctly.

  This does not guarantee that load power supply is working properly.

  Make sure that the cable is a charging cable.  If this does not work, you may need to contact the Department for further assistance.

• Connect the USB cable to transfer files to the Local computer

  After connecting the USB microphone from a mobile phone to the computer, I get the following:

  1. your device is locked

  2. set the Xperia on MTP mode.

  How do I do that?

  

  Have you tried restarting your device? And pc.
  Try to connect when you are in safe mode. Press and hold the option on the device power off