Read mkv files to the USB drive on a dvd transfer

Similar Questions

• data recovery - can't read a disk using the USB drive cage

  Original title: I have a few documents in Windows 98, I need to read the hard drive on a desktop DEll 530 which is SATA and Vista.

  I have a Vista OS and I need to read files stored on a computer with Windows 98, I drive hard on and have an adapter that has a PATA SATA and IDE port and plugs into the USB port on any computer but when I go into disk management it says I need to initialize the disk , but when I try on the MBR it says disk not ready, I don't want to format the drive, I need free and accessible files. What should I do? I have no funds for it either. Any suggestions? Please feel free to respond to my personal E-mail, it is as follows: * e-mail address is removed from the privacy *. Thank you that all suggestions will be appreciated

  Hello

  There may be a problem with the drive, the USB case or even the wiring.

  Since its control of important data with a real computer store (the one that makes its own
  maintenance in the House and not of leeks and glances at a Best Buy or other stores).

  Also be sure to check with the help of the external USB adapter.

  I hope this helps.

• 8.1 Windows Media Library problems because there are read errors after removing the USB drive

  Whenever I plug a USB key with music on it; It gets automatically added to my library of players. Then when I remove the USB key; I left with a lot of read errors. How can I get my USB drive does not automatically add its contents. I set AutoPlay, even not use. This never happened with Windows 7.i do not know what they changed to do this.

  Hello Chris,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the issue.

  This problem can occur either because of bad parameters of Windows media player.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Resolution of the problems of Run Windows media player library and check. Please follow these steps:

  a. press Windows + W keys, type Troubleshooting in the search box and press ENTER.
  b. click on 'show all' and then click 'Windows Media Player library'.
  c. click 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Database rebuild Windows media player and check. Please follow these steps:

  a. press Windows + R key, type %LOCALAPPDATA%\Microsoft in the immediate window and press ENTER.
  b. Select the "Media Player" folder, right-click on it and select delete.
  c. restart Windows media player.

  Note: Windows media player automatically rebuilds the database.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• All deleted files from the USB Flash drive!

  I have windows XP Professional on my computer and these days I have a problem with my USB flash drive (CCPC USB flash disk USB Device. I have a very important document that is stored in it and when I plug it into my computer it shows no content of the flash player automatically (as it was).

  When I click on the peripheral E: removable where is the flash drive, I get the message that the disc is not fomratted, would you like to see it format it now? I say no, and nothing happens. When I say yes, he says he must delete all files in the USB drive, but I don't want them should be deleted. What has caused this and what can do to save my documents are deleted?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• is it possible to transfer MP3 files to the flash drive USB to hard drive SYNC?

  See the title.

  Hi Tom,

  Yes, it is possible to transfer MP3 files, a flash drive USB external hard disk by connecting the two devices to your computer using two USB ports, and when the two are detected, you can copy the contents of files MP3, flash USB drive files and paste it on your external hard drive.

  For reference:

  Transfer files and settings from another PC:

  http://Windows.Microsoft.com/en-in/Windows-8/transfer-files-settings-another-PC

  Transferring files and settings: frequently asked questions:

  http://Windows.Microsoft.com/en-in/Windows-8/transfer-files-settings-another-PC

  Moving and copying files by drag-and - drop:

  http://Windows.Microsoft.com/en-in/Windows7/move-and-copy-files-using-drag-and-drop

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I need to copy files from my USB DRIVE to the vmserver running RHEL 5

  I need to copy files from my USB DRIVE to the VMSERVER running RHEL 5

  I can tether the drive to my host, but my VMserver does not see the drive.

  Is there some way to copy files from to the VMserver USBDISK create through vSphere, ESXi

  bndwork

  Moved to VMware Server------General questions forum.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• How to remove the files from the flash drive

  * Original title: FLASH Drive

  HOW TO DELETE FILES ON A FLASH DRIVE IN WINDOWS8?

  Please help me with the following information:

   

  I would like to know what is the brand and model of the Flash Player?

  Follow the steps below to remove the files from the flash drive:

  1. Insert the USB stick to the USB port of the PC. For memory cards, insert it in a card reader taken in charge connected to the PC.
  2. open Windows Explorer
  a. in the splash screen, type computer

  b. by clicking computer will lead you to your desktop and open Windows Explorer

  3. double-click on the removable media drive letter associated with your memory card or flash drive.
  (the image of the example below we double-clicked on F :))
  4. click right on the file that you want to remove and select Remove

  NOTE: To select several files to remove, press and hold down the CTRL on the keyboard and click to select multiple files.

  5. click on Yes to confirm the deletion.

  Hope this information helps, please answer with the State of the question for any further assistance.

• My files on the hard drive are getting corrupted?

  I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.

  Is someone can you please tell me what is happening with my hard drive?

  Thanks in advance...

  Is someone can you please tell me what is happening with my hard drive?

  Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.

  As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.

  You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• How to upgrade the already encrypted files on the USB HDD with new XP Recovery certificate

  I backed up the files encrypted in My Documents on a USB drive on which these files are also encrypted state. My computer crashed so I reinstalled the operating system. I wanted to send records encrypted USB HD to my computer or tried to copy projecteurDu and paste them into My Documents. I could not do this because I got "an error occurred in the application...". access privilegesDo i., access is denied. "I created a new recovery certificate and put in place a recovery agent. From there how I update the previously encrypted files on th USB HDD with the new recovery certificate? I'd appreciate a step by step procedure. Can I select the USB drive in the command line and run cipher/u on this drive or make the command/u of encryption on the computer without connecting to the USB HDD

  Sorry to say that my bet is that you never gain access to these files again.

  When you created the files encrypted, Windows creates a key for decryption to access these files and stored, encrypted in your certificate store.  When your system crashed, the decryption key has crashed with it.  Without this key, you will never have access to your encrypted files.  If you have recovered from a backup image-style, you should be able to access these files.  If you've recovered by installing Windows from the installation disc, then you have created a new and different installation with different Secure ID (SID) and a certificate store empty.  A recovery agent will only retrieve encrypted files that were created after that recovery agent was in place - as a new certificate.  What you really need to do, it's your old certificate to restore the backup that you created when you started using EFS.  The following article is mandatory for anyone using the EFS file system.  Special attention to the paragraph entitled "why you should back up your certificates.

  "Best Practices for encrypting file system"
   <>http://support.Microsoft.com/kb/223316 >

  If you do not have a return to the top of your certificate, then things look dark.  There is a program called "AEFSDR' whose 'professional' version comes through what has not been overwritten on your hard drive in search of remains of certificates that could be delivered together to recover.

  Good luck
  HTH,
  JW

• Deleting files from the Flash drive

  I have a Sandisk Cruzer Edge 16 GB Flash Drive.  I use it with two computers, an iMac and a Macbook Air, both using OS X 10.8.2.  Recently, I loaded about 10 GB of files on it.  I have now deleted these files.  However, Finder always shows the Flash drive as carrying 10.8 GB of files and having only 5,2 GB of available.  When I try to record a 10 GB file on the Flash drive, I get a message saying that there is not enough available space.

  How can I delete uploaded files from the Flash drive so that I can reuse the whole 16 GB?

  I don't use a Mac, so I'm going off the coast of the memory of what I read here before, but I think you need to empty your trash, while the disc is still connected to your Mac.

• E4200 with Win 7 - could not connect to the sharing of files on the USB storage device

  Hi, I tried several disks now, but am mainly interested in getting my Iomega 1 TB drive to work, but none of the 3 I tried to do. None of the USB drives I had when buying this router on the list of "approved" ridiculously short which is of course not noticed when buying the router, but the discs are recognized, I can FTP to one of them (Filezilla), format, create to-DOS, etc. via the web interface... the only thing that does not seem to work is to map the created actions. The error obtained net use is 'System error 1231' giving in 'Map network drive', 'Windows cannot access\\192.168.1.1' with 0x800704cf error code. I get what I pass credentials or not. Please advise, external storage has been the main reason that I bought this router and I need to know if I should return it. Thank you

  I know that sounds totally absurd given that FTP and what - not worked, but I swapped the USB cable I was using between readers and the router, and presto, it worked. I been in this business a lot of time and work with Cisco equipment all the time, so I know how ridiculous, this sounds like a solution, and perhaps in the context of permutation that cable thing happened I can't remember since I was a package 6 deep at the time... but it works now... now, if I can get just the AVI 1080 p files to stream to Xbox 360 without the video do rough I will be gold... but that's another thread. Thank you all.

• file permission security and files on the shared drive

  Hi, we have a folder called 'Team' in the shared drive \\India\Team. I placed an excel file named "Hourly" activation "share workbook" option for multiple users in my team. I have a total control on the 'Team' folder access I want to give read access to the members of my team 5 at the level of the 'Team' folder and change the access to my 5 members of the team at level 'hourly production' file so that all members can be updated hourly count at the same time. Limitation should be my team members should not be able to rename the folder 'Team' and should not be able to delete the file 'hourly Production '. I tried a lot of things, but it does not work. Please help me. My mail id is * address email is removed from the privacy *.

  Hi Christine,

  Welcome to the Microsoft community.

  According to the description you have provided to assign the read permission for the file in the shared drive.

  I advise you to check what are the rights that the user has to the shared folder. Please login as an administrator.

  a. right click on the folder, click Properties - Security tab - advanced

  b. click effective permissions, click Select, enter the user account, and then click OK.

  c. check what are count it the permissions the user has.

  d. If the user does not have sufficient permissions, click the permissions - changes to the permissions tab.

  e. click Add, enter the user name, click OK

  f. Select the appropriate permissions for the user, and then click OK.

  See: How to open a file if I get an access denied message?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  If you have any further questions on Windows, feel free to let us know. We will be happy to help you.

• How to download an application on the USB drive and install it then from there?

  I want to download an app from itunes store from a windows computer, save on the USB drive and then install on my iPad. Please gibve me a hint weather it is possible. Thank you!

  No, it isn't. Live or through iTunes only.

• How to extract the files from the HARD drive?

  I have a HDD1805 from a broken iPod 80 GB. I was wondering if there was another method I could use to extract the files from the hard drive.

  Hello

  Sorry, but I don t know what you mean exactly.
  Can you please explain exactly what you mean?

  What files you want to extract?

  Good bye