Select user before loading bar

Similar Questions

• When selecting options on any website as here he aes 30secs before anything happens between me clicking the button and page load bar from

  When to make a selection on a Web site after clicking the left button, it takes about 30secs before the selection starts to load the loading bar only shows not even during this time firefox just hangs then it loads as usual

  This has happened

  Each time Firefox opened

  == whenever I use firefox opera works very well done hated EI

  Hello Mike.

  Although that may not be related to your issue, I will remind you that the version of Firefox you are using right now has been suspended and is no longer supported. In addition, it has known bugs and security problems. I invite you to upgrade to the latest version of Firefox, for maximum stability, performance, security and ease of use. You can get it for free, as always, to getfirefox.com.

  As for your question, you may have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, make sure that it's not one of your modules installed, be it an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode , and then select disable all add-ons. If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and theme. You can troubleshoot plugins in the same way.

  If you want supported for one of your modules, you will need to contact the author.

• Start CalcScript befor, loading data

  How can I start CalcScript befor load data?
  I want clear slice in cube befor load data.
  Example:
  I export the data with the period Jan, Feb, so I have to erase data Essbase cube only fo period Jan, Feb. In the case when I export data for the period from March, I want to erase data with period Mar.
  
  I don't want to use maxl because in a maxl script I have to specify the user name and password.
  
  Thank you very much.
  
  --
  Gelo

  Hello

  The best way is to duplicate the KM - 'IKM SQL for Hyperion Essbase (DATA)'
  Modify the command 'Load data into essbase' km

  Update

  SQL = "" "select <%=od...

  ".

  to

  sql = ""

  now you can create an interface, the value staging as 'Table SUNOPSIS MEMORY ENGINE' and multi-line, data store loading essbase to the target, the value of KM that you just updated. "." < br / > then use calc script options, in order to have an interface that doesn't have a source and can run scripts Calc.

  Ok? FIX :)

  Cheers

  John < br / > http://john-goodwin.blogspot.com/

• MacBook Pro glued on the filled during boot loading bar

  My MacBook Pro (end of 2011; El Capitan 10.11.5) is recently become insensitive at the point of being unusable, so I decided to do a clean install, since I had to do one for a while anyway. Once I reinstalled El Capitan, I took my SSD (Samsung 840 EVO; 500 GB) out of the enclosure and put it back in my MacBook Pro, but it wouldn't boot. As a first step, it loaded so slowly that I decided to reset the NVRAM, who ends up helping just a little. The loading bar fills now halfway to the top with the usual speed, but after that, it takes a few minutes to complete. And once it is full, nothing happens. He remains on the Apple logo and the bar filled little matter how long wait.

  I also put the 500 GB SSD with the clean install in an another MacBook (Late 2008) and it works fine, so the problem must be related to hardware, I just can't determine what exactly. I tried to do an AHT, but basic and extended trials got stuck shortly after and gave me no result. I had trouble with the kernel panics, so I suspect that something may be wrong with my RAM, as I exchanged the 4 GB to 16 GB just now. But before you go out and spend money on the new RAM, I wanted to know if maybe someone runs into this behavior before and knows exactly what's going on or if not how I understand what is wrong.

  Almost all of the kernel panic seemed to happen every time I was using Photoshop or video in Safari streaming. I'll post an old report of kernel panic, but a problem with Time Machine has led to the removal of all my past, with the exception of the most recent backups. I hope someone can help me find another way to understand what is wrong.

  Update: I just tried it on an other SSD (same model, 250 GB) which has been working well in my older MacBook and this time I get an error message as soon as the loading bar starts to fill to the top. It remains for a few seconds, then the MacBook stops and starts again; This continues in an endless loop. I have attached a picture below.

  

  I really don't know how exactly to interpret this, but this looks like a kernel panic for me. What is my RAM after all? I appreciate any comment on that.

  Connect the SSD to the external MBP via USB and see if it will start the MBP.  If so, the internal SATA cable is suspect.

  If you can get the MBP to start, then you can start to deal with panics of the kernel:

  https://support.Apple.com/en-us/HT201753

  Also an EtreCheck report can be useful:

  http://www.etresoft.com/etrecheck

  Ciao.

• delay 10s ~ when clicking on links before loading starts

  I have a delay of 10 seconds after clicking on links before loading starts. On some sites, it's worse than on others, the worst being on reddit.com. I tried to reset firefox but that did not help. Thanks in advance for any help.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• Search by location bar goes to my internet service provider instead of search engine selected in the search bar; Why?

  Using Firefox 26.0 for openSUSE 12.3

  I disabled the keyword in the address bar search, because instead of results research of the source selected in the search bar (google), my string input sent to my internet provider, a kind of impasse, unproductive page 'web search' without any result.

  I had typed in "ezsniper' in the address bar. After you disable the keyword search in subject: config, my string entry took me to ezsniper.com, which is better than the impasse page Charter.com

  I put my addresses DNS 8.8.8.8 and 8.8.4.4 (Google Public DNS)

  The problem is not to breed, but is stopped before I did the DNS change. Charter Communications seemed to allow a way to disable the 'service' who had ignored my browser/preferences, so that he could... I appreciate the answers, doubt that Charter will get another chance to again divert the DNS.

• Vista black screen after the loading bar

  I have the problem that I am assuming that almost all users of Windows Vista have probably experiences - the black screen with the white cursor lonely after the loading bar 'Microsoft Corporation'. Here are the steps that I tried to solve the problem, but have not yet worked:

  • With the help of "last known good configuration" brings back me to the screen and the white slider
  • Go into safe mode which brings back me to the screen and the cursor
  • Activate the video mode low resolution which brings back me to the black screen and a cursor
  • Using Ctrl + SHIFT + ESC to appear during the black screen Task Manager
  • CTRL + Alt + Delete does not work on the black screen
  • I do not have access to the installation CD, as it was preinstalled on the computer

  Yes, as usual, what happened after a windows update - I really should stop waiting for something good to these updates.

  I'm under the original version of Vista Home Premium without service pack - these caused a similar problem, but at least I was able to return the system restore.

  Thank you in advance, I know how useful these forums can be.

  Yes, a new installation of Windows 7 was the way for me. Lucky he composed a back all my documents, however. Thanks for the help all. Unfortunately I have no where near more closely to solve the problem, then when I started.

• Windows vista family premium does not start, stuck at the loading bar

  My acer aspire abruptley off without going through the proper closure procedure, now when I try to start the laptop, it hangs at the loading bar Microsoft corporation just before you enter you password, I tried to start in safe mode and it crashes to the crcsdisk.sys file (something like that) and I have when I try to Startup Repair scans try to repair a disk error I believe and says "can't." fix automatically' I do not know what to do and I'll have sleepless nights on the dam to help much appreciated thing.
  Adam

  It depends on what caused the problem. The system could have hardware problems and need
  repair. I would like to have a competent computer store look at the. And get the disc would be a
  good idea.

  "It is a serious mistake and"may"not be fixable without professional technology support of.
  a real computer store (not the leeks and the glances at a BestBuy or other BigBox stores) or your
  Manufacturer of system support.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• BlackBerry Blackberry Bold 9700 Smartphones blocked (or stuck) with 99% of the loading bar HELP!

  Hello world!

  Well, everything is explained in the title, my blackberry bold 9700 is block 99% of the load bar when I reboot it.

  Yesterday I had like 3 or 4 updates to some app and then I reboot but now it's blocked... I try to remove the battery several times, did not work, I try to use alt + shift + del several times, did not work, I try to use BBSAK but the blackberry cannot recognize... I don't know what to do and the worst part is that I did not do backup everything (ok so I'm little kind of stupid, but...)

  In any case of me HELP

  Thank you!

  YES! I found a solution! Working on it since yesterday! It is an application that has been blocked my BB

  So for all of you who have had the same problem here's what I did: I use the AppLoader, you will find cor D, F no matter) / Program Files / Common Files / Research In Motion / AppLoader / loader

  Launch the loader and connect your blackberry to the PC by USB. BUT it must detect the blackberry before the loading bar reach 3/4. So when the blackberry is detected, quickly click Next, then you should have a list of all your applications. Now deselect the application causing problem (or if you don't know which deselect all to remove all) and then click Next. PLEASE KEEP IN MIND THAT THE LOADING BAR SHOULD NOT SPEND 3/4. After that it's going to be something and if you see that it blocks just to make a reset in now alt + shift + del 2 times, wait, she returned to the loading bar and try again to detect the phone in the AppLoader who does not close during this manipulation... After all, that things blackberry should restart and hope for you, came back to life. So, in my case, I lost all my photos (don't know why), but at least I'm keeping all my contacts and messages. In any case it's better like this than all lost...

  Sorry for my bad English, I think that everything is not really clear, but perhaps that might help someone...

• Loading bar

  When I apply my edge slideshows in my Muse pages, it takes some time until something happens, enter the site.

  Does anyone know how to implement a loading bar, so that users know that something will happen, during the loading of the animation?

  Chears.

  Poul

  Hi Poul

  You can use the preloader from the exchange library:

  http://Muse.Adobe.com/exchange-library/preloader

  Thank you

  Sanjit

• Virtual Center Version 2.5.0 Build 119598 - add user / Select user GUI - not finding the users accounts and groups in Microsoft AD

  All,

  Has anyone seen the following symptoms?

  (1) when a user or group account does not appear in the 'users and groups' dialogue box 'Select users' research will result in a "select users or groups" pop indicating "no user or group not found as the search result. Before beginning your search, in the dialog box "Select users", the correct domain name appeared in the "domain:" drop-down list.

  (2) not possible to account or group of usernames containing spaces. She will accept the format of the name of groups 'Pre-windows 2000' of objects. The account names and groups ' select users ' GUI will be find the account or group when you enter the explicit & lt; domain name & gt; ------& lt; Account name & gt; in the text box 'Users' or & lt; domain name & gt; ------& lt; Group name & gt;.

  Is there a known issue with user accounts or to find when they do not appear in the "users and groups" in the dialog box "select users".

  Kind regards

  Steve

  Sorry, wrong forum, this is Server 2.0.

  ---

  If you have found this device or any other answer useful please consider the use of buttons useful or Correct to award points.

• Web site with the loading bar

  Hi all

  I have a site I created in AS3. Currently, there is a home page main before entering the site (this is index.html). This is a short animation, and then you click a button to enter the main website. It takes you to a second page HTML (home.html) where the rest of the site is built in flash.

  I want to be able to have everything on ONE page and have a loading bar precede everything. The website itself has a charger inside to display text and different images, and I fear that the amount of time it takes to load to start (the short animation) and to go to the site even (most of the images) is seriously detrimental to the flow of the Web site.

  My questions are essentially the following:

  How can I put the animation in the same location as the Web site? Do I need a charger in a charger?

  How to make a bar of load shot all this?

  Thanks for your comments. I hope it is something simple that I still have to learn. Thank you.

  -Ted

  kglad wrote:

  you embed not home.swf index.html.  You "load" home.swf into index.swf using the loader class.

  Thus, for example, in index.swf:

  yourbtn.addEventListener (MouseEvent.CLICK, f);

  var ldr:Loader = new Loader();

  var urlR:URLRequest = new URLRequest ("home.swf");

  addChild (ldr);

  ldr.contentLoaderInfo (ProgressEvent.PROGRESS, loadprogressF);

  function loadprogressF(e:ProgressEvent) {}

  View your preloader using

  e.bytesLoaded and e.bytesTotal;

  }

  function f (e: Event) {}

  LDR. Load (urlR);

  }

• Anonymous - SELECT user FROM DUAL;

  I am filling a field in table LAST_UPDATED_BY VARCHAR (15) a form of APEX, with the following valid trigger:
  
  CREATE OR REPLACE the TRIGGER 'bi_EMPLOYEES '.
  BEFORE INSERT ON employee
  FOR EACH LINE
  BEGIN
  SELECT USER
  IN: new.last_update_by
  FROM DUAL;
  END;
  /
  
  The field is filled in with the value: ANONYMOUS after clicking on the button changes to. Can someone tell me why?

  ANONYMOUS is the real database user...

  Try:
  : new.last_update_by: = NVL (v ('APP_USER'), USER);

  Therefore not select necessary...

• When I try to restore my iPhone 6, it keeps freezing on the loading bar.

  About a day after buying an iPhone 6 (16 GB), it began to restart loop (the logo of Apple, black screen, Apple logo, etc.) constantly. Over the next few days, this dilemma has happened more often, until I started looking for a solution. I tried everything, nothing worked. Thought it was a software problem, I have so I installed the beta version of IOS 10, hoping that the software does not contain what I well was a bug. He worked, for a day, while the closure began. Then, I visited my local EE store (where I bought the phone). They said they couldn't do anything while he was running the IOS beta 10 in which I installed. So, I put my phone in recovery mode and tried to restore the device. However, when iTunes was finished the extraction software, my phone has decided to restart. The phone was stuck in recovery mode and I could not access the device. I tried to do the restore again, and iTunes extracted the software successfully, however, when the loading bar was revealed, he didn't budge. I left the phone for an hour, which has yet to result in any kind of progression. For the entire hour, iTunes also said "Waiting for iPhone" or something of the kind. I have since renounced solutions after trying several times to restore the phone, which leads only to no progression of the extraction of the software. All solutions?

  Hi AtomicSamantha,

  I understand that your iPhone is stuck at the start after trying to restore with recovery mode. I know it's important to have an iPhone that can run when you need it, so I'm happy to provide advice to help this issue.

  To eliminate the possibility of a communication problem, the cause, my first recommendation would be to try to restore the iPhone in recovery mode, first with another well-known USB cable, then with another computer well known or network if necessary.

  If you continue to have problems with your power on iPhone after trying to restore with all new connections, you can find more information by using one of the Apple here support resources:

  Contact Apple support

  Thank you for using communities of Apple Support, cheers!

• Is it possible to edit photos on a media on my iMac SDHC card before loading on my iMac

  Is it possible to edit photos on a SDHC card using my iMac, before loading the pictures changed on the iMac?

  Yes but it depends on no doubt what application you use photo editing I guess. I use Adobe Photoshop Elements and I can edit directly on the map of the camera if I want and download images to the iMac or elsewhere. I just did as a test on the card from the camera, but normally I upload the images on my desktop first and then go from there.

  Rick