Start CalcScript befor, loading data

Similar Questions

• A trial is possible before loading data into Essbase?

  Hi all
  
  I am trying to load data into Essbase, but I need to check in advance for any errors. Is there a way to test vacuum as we do in planning of loading utility?
  
  I am trying to load via a rule file!

  This thread comes to mind:
  http://www.Network54.com/Forum/58296/thread/1311019508/data+load+optimization+-headervs + column

  I try to stay away from my most entertaining reviews that it simply raises my bp.

  I would say that Essbase databases with incorrect data are the Essbase databases causing a lot of grief. I think that the OP certainly has the right idea, I don't think that the place to do so is Essbase.

  :)

  Kind regards

  Cameron Lackpour

  P.S. If it is a database of the OSB, I like your idea of a fictitious scenario, then a replacement of rule of load (groan) to move the data of this scenario, but even with a WHOLE CLEARBLOCK which will create a fragmentation.

  Published by: CL on August 30, 2011 14:31
  Well, the red stuff is in our veins, you know the stuff that carry oxygen to our body. That starts with a 'b' and ends with a "d"? This word is prohibited through OTN. As well as leather things you put on your feet. So weird. I had to post four times to understand what was get arrested.

• FDMEE: Custom data clear Essbase before loading data

  Hello

  is it possible to adjust a clear script, which runs through the execution of the export to replace in FDMEE mode?

  Classical FDM it was possible in the script of the CHARGE adapter, but in FDMEE no adapter is not more

  Any help would be greatly appreciated!

  Thank you

  Ilias

  Remove the option replace was quite simple in classical FDM but I don't know how it can be done in FDMEE. Your other option would be to put the code in the BefLoad script event that would validate what export Mode was selected by the user and complete the process with a message of warning/information if they inadvertly, select the option replace

• ODI - how to clear a slice before performing data loading interface

  Hello world
  
  I use ODI 10.1.3.6 to load data into a cube ASO (version: 11.1.2.1) every day. Before loading data for a particular date, I want the region to be set up in the ASO cube defined by 'this date '.
  
  I guess I need to run a PRE_LOAD_MAXL_SCRIPT who clears the area defined by a MDX function. But I don't know how I can automatically set the region watching several coloums in the data source.
  
  Thank you very much.

  There are a number of ways to do this.
  Define substitution variables, it could be programmed from ODI by passing parameters in a maxl script, or by using the Java API
  Or you could generate the clear area in ODI and then put through to a Maxl script as a parameter.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• FDM 11.1.2.2 EFFECTS in the data after loading data

  Hello

  I'm loading data for planning an application of FDM for 30/04/12 to 31/3/12 (April) FY13 but perform 30/04/13 to 31/03/13 (April) exercise 14 in planning and for the 13 year data are deleted automatically

  I use replace when exporting data option

  I guess that the FDM cannot remove data that are responsible for the planning application

  can someone help me solve this problem.

  Thank you

  Answer: The correct data is loaded to April 14 exercise

  Have you reviewed your Control Board for the periods? Maybe it's that you map Apr-2013 to APR-FY14

  Answer: Yes mapping for April 2013 is mapped to APR-FY14 > This is the reason why the data is loaded to FY14. You need to update your table of control periods.

  Then your data for FY13 are deleted in planning when using replace. When you load mode replace, FDM runs a clear script before loading data. Which erases all intersections for category (scenario), period and entity (all descendants of your target entity)

  Question why the 13 year data are deleted in the planning if we choose the option replace > by default the CLEAR of the LOAD ACTION script do not include the year dimension. This is why the data are deleted for all years. You must include in the script

• delay 10s ~ when clicking on links before loading starts

  I have a delay of 10 seconds after clicking on links before loading starts. On some sites, it's worse than on others, the worst being on reddit.com. I tried to reset firefox but that did not help. Thanks in advance for any help.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables some settings and disables most Add-ons (extensions and themes).

  (If you are using an additional theme, place you in default theme.)

  If Firefox is open, you can restart in Mode without failure of Firefox in the Help menu by clicking on the restart with the disabled... modules menu item:

  

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

  Thank you.

• Dynamo admin: method to start loading data?

  Hello

  The files get generated in the folder you want. Now I need to test the load of data takes place successfully rather than wait until the next run time.

  Which is the method in the admin of dynamo I call inorder to start loading data?

  I tried to call the method loadAllAvailable() method under each Chargers, but it keeps returning 0 even if there are a lot of log files in the folder.

  Please let me know.

  Thank you

  Saud

  Hello

  Finally managed to find where I had made the mistake. Eventhough the ARF.base has been added to the modules for construction of production, it was not in the list of modules in the startup for the production instance script.

  Thus the LogRotationSink component was not enabled in dynamoMessagingSystem.xml

  Once the ARF.base module has been included in the startup script, everything worked like a charm

  Thank you

  Saud

• Need to truncate the table before loading new data

  I use sqlldr control file to load a flat file to a table. This file will be provided each month and is a complete replacement file. I need to automate the process to truncate the data already present in the table before loading new records. I can do this in the same ctl file as load or do I need a separate batch file?
  
  He is the current ctl file:
  
  DOWNLOAD THE DATA
  INFILE ' D:\DATA\OHNFILES\OHN_PROVIDER_DATA. TXT'
  INSERT
  PRESERVE SPACES
  IN THE WEB OF THE TABLE. OHN_OK_SELECT
  (
  Position of CHKPPO (0001:0003).
  Position of the EFFECTIVEDATE (0004:0011).
  Position of TERMDATE (0012:0019),.
  CRED_ID position (0020:0024).
  LASTNAME position (0025:0099),
  Position of FIRSTNAME (0100:0124),
  Position of MIDDLENAME (0125:0149),
  Position of PROFESSIONALDEGREE (0150:0164),
  Position of PRIMARYSPECIALTYID (0165:0214),
  Position of PRIMARYSUBSPECIALTYID (0215:0264),
  Position of SECONDARYSPECIALTY (0265:0314),
  Position of OKLICENSENO (0315:0329),
  Position of the Nordic Institute of patents (0330:0339),
  Position of TAXIDNO (0340:0348),
  Position of MEDICARENO (0349:0365),
  Position of OFFICEADDRESS (0366:0465),
  Position of BLDGSUITEPO_BOX (0466:0500),
  Position of the CITY (0501:0525),
  Position of the STATE (0526:0527),
  Position of code POSTAL (0528:0537),
  Position of TELEPHONE number (0538:0549),
  Position of FAX number (0550:0561),
  Position of EMAILADDRESS (0562:0611),
  Position of the COUNTY (0612:0631),
  BILLINGADDRESS position (0632:0731),
  BLDGSUITEPO_BOX1 position (0732:0766).
  Ville1 position (0767:0791).
  STATE1 position (0792:0793).
  POSTALCODE1 position (0794:0803).
  Telephone1 position (0804:0815).
  Position of telecopie1 (0816:0827),
  EMAILADDRESS1 position (0828:0877).
  MAILINGADDRESS position (0878:0977),
  BLDGSUITEPO_BOX2 position (0978:1012).
  CITY2 position (1013:1037),
  STATE2 position (1038:1039).
  POSTALCODE2 position (1040:1049).
  Telephone2 position (1050:1061).
  Telecopieur2 position (1062:1073).
  EMAILADDRESS2 position (1074:1123).
  Position of the OST (1124:1163),
  Position of CLINIC_GRPNAME (1164:1263),
  Position of FEESCHEDULEID (1264:1278),
  FILL position (1279:1400)
  )

  customer wrote:
  I use sqlldr control file to load a flat file to a table. This file will be provided each month and is a complete replacement file. I need to automate the process to truncate the data already present in the table before loading new records. I can do this in the same ctl file as load or do I need a separate batch file?

  Same file. Say "TRUNCATE" instead of "INSERT".

  LOAD DATA
  INFILE 'D:\DATA\OHNFILES\OHN_PROVIDER_DATA.TXT'
  TRUNCATE
  PRESERVE BLANKS
  INTO TABLE WEB.OHN_OK_SELECT
  ( ...
  

  Published by: Frank Kulash, on September 3, 2009 15:12

• calculation of values in sqlloader before loading the data.

  Is it possible in the control sqlloader file to calculate the values in a particular field and then transfer the data to a table.
  
  for example. If I have a, b, c, d, e, f in csv files.
  
  e field value is based on if a is null or = 0 then b, if c is null or = 0 then d
  and finally e = b | » -'c

  Yes. You can use the SQL functions in your control as a GARNISH file in the example below. You could solve your problem by using NVL I think...

  LOAD DATA
  
  INFILE 'city.txt'
  APPEND
  INTO TABLE CITYOR_TOWN
  
  (
   COTN_NAM             POSITION(7:34) "TRIM(:COTN_NAM)",
   COTN_CITYCODE      POSITION(1:6),
   COTN_ID                SEQUENCE (COUNT,1),
   COTN_STT           POSITION(35:36),
   COTN_CNTY          POSITION(37:39),
  ...
   FROM_DATE POSITION(84:91) DATE "YYYYMMDD" "replace(:MED_FROM_DATE,'00000000',null)",
   H_AVGESTAY           POSITION(19:21) ":H_AVGESTAY/10",
   CLTYPE      CONSTANT "RXTZASCode",
  ...
  )
  

  Published by: Zoltan Kecskemethy on May 27, 2013 17:24

• Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  Windows XP has entered a loop, it stops just before "loading personal settings" then restarts so far again and again.

  It won't let me choose a mode which worked well, it is stuck on "Start windows normally" for 20 seconds.

  Hello

  Restore the system from the recovery console and check.

• Black screen before loading windows

  I watched videos and all of a sudden my computer crashes. I had similar to freeze in the past and I restarted my pc, and that she would go to advanced boot settings, so I was able to start windows. This time I rebooted and the motherboard splash screen came, but before loading Windows logo appears, the screen goes all black, boot advanced settings does not appear this time. The only shot that turned out to do anything is Ctrl + Alt + Delete, which just restart the computer and the same thing happens. I can't get into my bios. I am running Windows Vista 32bit.i do not have a RAID array. Any help will be greatly appreciated and sorry for my bad English.

  There are many possible methods to try to resolve the problem without using Safe Mode. However
  Keep your eyes on it that sometimes get you lucky and something works partially allowing
  Safe mode, and then those that can be completed and access Windows.

  Also use Google search. Black screens are extremely difficult to manage.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• built-in photo editor called (photos) does not. It says "cannot load data.» Check your connection.

  Can someone please help, when I click on a photo to change and I chose the second Editor (photos), that it loads a bit, but then he said can not load data, check your connection. But it used to work before! and I am connected to wifi!

  Try to force stop the app and erase the data. It might be a little difficult because it does not find in the settings-applications-all. However, you should be able to open the app in app menu, then press home. After that, select recent application manager and longer tap on the pictures, you should get info app.

• ODI - 1228:Task Load Data - LKM File to SQL-fails on the connection target: table or view does not exist

  While performing a mapping (present in the package) that loads the file to table data, my mapping is being failed in the step - LKM file with above mentioned SQL error.

  This task is running for 30 candy Mint and loading data about 30 to 40 million for the temporary table of C$ ODI.

  Before the completion of the task is to make failure and also C$ table is also get deleted.

  Any possible resolution for above mentioned the issue?

  Problems have been solved.

  In our case, the prefix of all the data store name has been SRC_ so the nickname of all the data store became SRC, and the table name C$ depends on the daatastore Alias.

  So for executing two mapping tables $ CAN have been getting dropped by other mapping due to the same table name $ CAN.

  Change the Alias name giving it a unique name solve the problem.

• Can not boot from my DVD to a format before loading Win 7

  I tried to start my (professional) win7 updated my dvd player, so I can format my C: drive before loading Win7.

  I did the necessary bios change for boot order, I get the message "press any key to boot...". ', but a touch usually takes me to my C: drive boot upward.

  I should mention that I installed win7 on my C: drive but was never an option to format the drive, and now there are still all my old files and the background image that I don't want. Otherwise, the installation went great.

  There is another thread where I was getting help and some good ideas, but he seems to have died.

  See Win7 XP update not did me not the ability to format the C: drive or delete all the old files on this drive on this link for further details.  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Win7-upgrade-from-XP-did-not-give-me-the-option-to/4ca764c3-2f45-4B2F-84b9-808ce96476c4

  Basically, what I want to know is, are SATA drives "to hot' I think the term is.

  In other words do I can unplug the SATA connection on my C: drive, see him if I can then boot in my reader DVD, then in case of success, taking the C: drive in and move forward with the formatting and reinstalling from there?

  Thank you

  You need the C: drive to the DVD player work. I tried this before. Your Windows 7 CD may be corrupted. I recommend you to speak with Microsoft by phone on this problem. Here is ther number (800) MICROSOFT (642-7676).

  Hope this helps!

  Sammy J. Of SammyShane Tech-Center Inc.

• Error in loading data FDMEE

  Hello all i am trying to load data using FDMEE but I got these errors but I do not understand what it is

  "

  2016-01-25 12:34:31, 792 INFO [AIF]: beginning of the process FDMEE, process ID: 104

  2016-01-25 12:34:31: 792 [AIF] INFO: recording of the FDMEE level: 4

  2016-01-25 12:34:31, 793 [AIF] INFO: user:

  2016-01-25 12:34:31, 793 INFO [AIF]: place: APC_Data_location (Partitionkey:11)

  2016-01-25 12:34:31, 793 [AIF] INFO: period name: Dec-2015 (period key: 12/31/15 12:00 AM)

  2016-01-25 12:34:31, 793 INFO [AIF]: name of the category: real (category key: 1)

  2016-01-25 12:34:31, 793 [AIF] INFO: name rule: Data_loadRule_1 (rule ID:13)

  2016-01-25 12:34:33, 792 [AIF] INFO: Version FDM: 11.1.2.4.000

  2016-01-25 12:34:33, 792 INFO [AIF]: connect the file encoding: UTF-8

  2016-01-25 12:34:34, 997 [AIF] INFO: - START IMPORT STEP -

  2016-01-25 12:34:35, 157 INFO [AIF]: run the following script: /u02/Oracle/Middleware/EPMSystem11R1/products/FinancialDataQuality/bin/FusionCloud/FusionCloudAdapter.py

  2016-01-25 12:34:35, INFO 171 [AIF]: FusionCloudAdapter.importDataFromFusion - START

  2016-01-25 12:40:57, 601 INFO [AIF]: output Standard: INFO: from script FusionCloudAdapter...

  Proxy configuration for deployment in Production SEEP

  Main program of starting FusionAdapter...

  mode of production: importDataFromFusion, pid: 104

  FusionAdapter initialized during initialization.

  fusionGlWebServiceWsdl: http://

  fusionGlWebServiceUser: sysadmin

  fusionProductType: GL

  The main program of FusionAdapter is complete.

  INFO: The FusionCloudAdapter script failed as described above.

  2016-01-25 12:40:57, 601 INFO [AIF]: SD: com.sun.xml.ws.wsdl.parser.InaccessibleWSDLException: 2 InaccessibleWSDLException heads.

  java.io.IOException: unable to proxy tunnel. Proxy returns "HTTP/1.1 502 cannotconnect.

  java.io.IOException: unable to proxy tunnel. Proxy returns "HTTP/1.1 502 cannotconnect.

  at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.tryWithMex(RuntimeWSDLParser.java:182)

  at com.sun.xml.ws.wsdl.parser.RuntimeWSDLParser.parse(RuntimeWSDLParser.java:153)

  at com.sun.xml.ws.client.WSServiceDelegate.parseWSDL(WSServiceDelegate.java:284)

  to com.sun.xml.ws.client.WSServiceDelegate. < init > (WSServiceDelegate.java:246)

  to com.sun.xml.ws.client.WSServiceDelegate. < init > (WSServiceDelegate.java:197)

  to com.sun.xml.ws.client.WSServiceDelegate. < init > (WSServiceDelegate.java:187)

  to weblogic.wsee.jaxws.spi.WLSServiceDelegate. < init > (WLSServiceDelegate.java:86)

  to weblogic.wsee.jaxws.spi.WLSProvider$ ServiceDelegate. < init > (WLSProvider.java:632)

  at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:143)

  at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:117)

  at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:88)

  to javax.xml.ws.Service. < init > (Service.java:77)

  to com.hyperion.aif.ws.client.ErpIntegrationService.ErpIntegrationService_Service. < init > (ErpIntegrationService_Service.java:74)

  to com.hyperion.aif.fusion.FusionAdapter. < init > (FusionAdapter.java:177)

  at com.hyperion.aif.fusion.FusionAdapter.main(FusionAdapter.java:85)

  2016-01-25 12:40:57, ERROR 602 [AIF]: the script failed to run:

  2016-01-25 12:40:57, FATAL 605 [AIF]: error in Comm.executeJythonScript

  Traceback (most recent call changed):

  Folder "< string >", line 528, in executeJythonScript

  File "/ u02/Oracle/Middleware/EPMSystem11R1/products/FinancialDataQuality/bin/FusionCloud/FusionCloudAdapter.py", line 163, < module >

  fusionCloudAdapter.importDataFromFusion)

  File "/ u02/Oracle/Middleware/EPMSystem11R1/products/FinancialDataQuality/bin/FusionCloud/FusionCloudAdapter.py", line 60, in importDataFromFusion

  raise RuntimeError

  RuntimeError

  2016-01-25 12:40:57, 692 FATAL [AIF]: error in import data Pre COMM

  2016-01-25 12:40:57, 697 [AIF] INFO: end process FDMEE, process ID: 104

  Thank you

  The script attempts to connect to a WSDL URL and therefore cannot error

  "java.io.IOException: unable to tunnel by proxy." «Proxy returns «HTTP/1.1 502 cannotconnect»»

  I see that it is from SEEP, maybe you have not set the correct details for Fusion Cloud, are you sure that you configure the WSDL URL appropriate in the connection source Configuration section in FDMEE

  See you soon

  John