Selected line AF:table see, when the color

Similar Questions

• HP Color Laserjet M277n MFP: How to use the black cartridges only when the color toners are empty

  Hello team HP,

  I recently bought a HP Color Laserjet MFP M277n I printer I print black & white user only and really don't need color prints. How to set the printer options to print only black & white? How can I replace only the black cartridge when the color cartridges are empty? How many prints (approximate), we can take by toner?

  Kind regards

  Christèle

  Hi @Pavumba,

  Welcome to the Forums of HP Support!

  I understand you're wondering how to use black ink only on your HP Color Laserjet M277n MFP printer. I would be glad to help and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I see that you wonder if you need to replace the color cartridge when it is low. This printer is a printer AIO, therefore, you need to replace the ink cartridge when it becomes too weak to be able to resume printing. However, if you print mostly in black, you can configure a preset black only to print in black and white. This would help reduce the use of the color cartridges.

  NOTE: Composite black - for black and white images and photos, a mix of colors called 'composite black' can be used to achieve the quality significantly improved picture and soft gray tones that can be achieved with only black toner. For users who want to print images using just black toner, many HP printers color customer offer configurable options allowing the client to print using only black toner. For example, by selecting "print in grayscale" in the printer driver Specifies print using black ink only. For more information about the use of the toner cartridges, please see this article: how the Toner is used.

   

• A jpg still print with white lines spaced, but I replaced the color cart.

  A jpg still print with white lines spaced, but I replaced the color cart. Please notify. Thanks in advance.

  Hello

  That's what I feared. This kind of banding appears in images when using normal paper for use with low quality settings. You can try to increase the quality of the prints or try using photo paper.

  A good document to make booklets with photos is the HP brochure and flyer. (C6818A)

• Hi - I am trying to draw an irregular shape (series of straight lines) and fill it with the color... How can I do this?

  I need to draw a shape irregular, closed, which is a series of joined lines and fill it with the color, etc., I can only see square, polygon, etc...

  Any suggestions?

  You can set the polygon tool to 3 sides, or use the pen tool.

• When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  When I share a note with a checklist, I can see when the other person check of an item. I do not see when registering an item (it is disabled). Why?

  Try switching your Notes on / off under settings > iCloud or maybe restart the device-restart your iPhone, iPad or iPod touch - Apple Support to see if this could solve the problem.

• can you use a deskjet 970cse in black only mode when the color cartridge dries up

  can you use a deskjet 970cse in black only mode when the color cartridge dries up? Thank you, Jerry

  banhien information is very accurate. I would just add a bit of it. Because this printer uses a tricolor cartridge and a black, it should be one of the printers that will print with just the black cartridge installed. It is called print in backup mode. I should happen automatically when you remove the color cartridge and try printing. A message will arrive on the printer or the computer and ask you if you want to print in backup mode. Say yes, and it should let you print. Hope that helps.

• How to create table selectable line or not based on the value of the line

  Hello.
  
  JDeveloper 11.1.1.2
  
  Is it possible to make a selectable table row or not based on a value in the line.
  
  That is to say. lets say that the row contains a Boolean LOCKED = TRUE.
  This line should not be selectable.
  
  A line whose value LOCKED = FALSE should be selectable.
  
  / Erik

  Erik,

  No particular reason to disable a selection of lines for a particular line? If I'm an end user, I would be clicking on the same line of thought again and again my mouse does not ;) (call me dumb :)). How do you differentiate this line (using inlineStyle / styleClass) based on the value of line? In addition, you can disable the other buttons when a row with a particular value is selected (so that the user knows that the selected line is not treatable).

  Arun-

• Is there a way to select lines or separate columns in the tables?

  This seems to be something very simple, but does not seem to Indesign (I currently use CS4) to facilitate the selection of rows or columns that are not side by side.

  Usually, something like this is done with a modifier key, for example now control and selecting each desired line/column/cell is selected.

  Even if there is a script or command or something which selects every second row/column, that would be enough.

  Most of these things are too specific to be included as a feature (in fact, I would include alternating fills row/column to this as well), but are easily scriptable.

  This fast javascript seems to do what you want:

  firstRowToChange = 1;
  table = app.selection[0];
  if (table.hasOwnProperty("baseline"))
   table = table.parent;
  if (table instanceof Cell)
   table = table.parent;
  if (table instanceof Column)
   table = table.parent;
  if (table instanceof Row)
   table = table.parent;
  if (table instanceof Table)
  {
   for (a=firstRowToChange; a		   

• Get the values of default table row when the page loads

  Hello

  I am running JDev 11.1.1.7. We have a page that contains two tables in a relationship of the master / detail of nickname. We can do a real master ADF / detail with view items related because the query for the 2nd table is complex and works best when queries with binding settings. The View object for the 2nd table has a request with 2 link params as it can get in the first table. Thus, when a line is selected in the first table we want to execute ExecuteWithParams on the object from view of the table 2. We do it in the Bean managed for the page in a method that is the selection to the first table listener. It works fine except when the page initially loads, the first line is selected by default. When the default value is selected the selection listener is not triggered.

  I've seen the suggestion of not having a line selected by default when the page loads by removing the value selectedRowKeys on the table. However, we do not want that the 1st row of the table secondary master to be selected by default and we as the table of detail to show the correct corresponding lines.

  Steve

  Steve,

  Not really sure when you say that the 2nd table is complex and may not use the master detail. If the settings link in the parent table, you can set the ViewLink accordingly and it should work, right?

  In any case, if you're after the execution of methods on the loading of the page, you will find the links below.

  If it's a working group, you can add a methodCall as activity by default and UTF, you can use phase listener (if listener server does not).

  https://blogs.Oracle.com/aramamoo/entry/an_epic_question_how_to

  Advice from the Oracle Johny: ADF: how to run the ViewObject with a ViewCriteria on the PageLoad in Application Web ADF

  It will be useful.

  See you soon

  AJ

• Which granted select on a table and when?

  Hi all
  We are running Oracle 10 g. There are a few differences with an array of our production compared to development environments. The table on the development has also provided a grant and has also a synonym. My boss wants to know who was granted access to this table and when? I'm not a DBA. I asked our s/n, and he said that he doesn't think that Oracle keeps track of this type of information. Is it possible to follow these types of changes? Who created such synonym for this table and when? One last thing to add, is that checking is not turned on.
  
  
  Thank you for your comments,
  
  Seyed

  We can see when synonyms are created but not who created unless there is a check of all DDL

  SQL > select TIMESTAMP, CREATION, OWNER, LAST_DDL_TIME, OBJECT_NAME from dba_objects where type_objet = 'SYNONYM' and OBJECT_NAME ='-' and owner ='-';

  -Thank you

• The deleted output tables finished when the conditional tags using build

  Hi and thanks for any help you can offer on this...
  
  I use the WebHelp/print Documentation HR 6 single-sourcing method, and I created two build conditional tags - "OLH" (online help) and "printed". Essentially, the conditional tags are awesome... except when my content includes HTML tables. If a table exists within a set of conditional tag material, material that exists AFTER the table (and outside the conditional tag) is omitted from the finished output (i.e., regardless of the unique method out of the Source used for the production of finished products - WebHelp or printed Documentation). In some cases, only certain documents after the table is omitted.
  
  For example, in a comprehensive document which includes a specific paragraph and a data table I want to exist only in my printed docs. I apply the tag "Print" in this paragraph and the table. Once I have generate the schema of WebHelp (or even preview and apply the term appropriate on the conditional tag build), labeled "Print" content is left out, but is so everything that followed it. even if I don't apply a tag of conditional compilation to the material in question.
  
  I have a workaround, but it sucks... If I delete the tables (and re - format the text content), everything is fine, and the build tags work properly. The thing is, I want to use the tables in my content.
  
  I wish a WYSIWYG solution, but if I have to change the code, I'll live... I just need to know what and where to change (I played with the ' < p > < style = "" x-condition: printed; ' > ' tag and additional locking "< /p >" and "< / style >" tags, but that has not worked ").
  
  Thank you for taking the time to review that and for any help you can give.
  
  

  Hi Vernholio,

  This looks like a problem that is covered in the forums before. Basically, it happens when the Board as a whole has been select. If you click and drag to select all of the cells in the table, then apply the conditional tag, there should not be problems with the rest of the content.

  See excerpt on Peter Grainge's site #69

• Execution of statement of UPDATE for the whole table even when the WHERE Clause is presentation

  Hi friends,
  
  I have a problem in a stored procedure where I wrote an update with a where clause clause statement. At some point only one line should be updated according to the unique identifier in where clause.
  
  But what is happening is that the Update statement is getting executed for all rows in the table to neglect the WHERE clause. I don't get any idea of why this is happening. Here is the stored procedure and the update statement is BOLD:-
  
  CREATE OR REPLACE PROCEDURE MDMADM.proc_MDM_InsertCntryDetails
  (
  CntryMasterCode IN VARCHAR2,
  CntryName IN VARCHAR2,
  MDMUser IN VARCHAR2,
  Exists IN ITS ENTIRETY,
  status in VARCHAR2,
  Inserted_By IN VARCHAR2 default NULL,
  Modified_By IN VARCHAR2 default NULL,
  Mdm_Code IN the DEFAULT NUMBER 0.
  Action in VARCHAR2 DEFAULT 'Add ',.
  XGenAttNames IN VARCHAR2 default NULL,
  XGenAttValues IN VARCHAR2 default NULL,
  MirusAttNames IN VARCHAR2 default NULL,
  MirusAttValues IN VARCHAR2 default NULL,
  GenisysAttNames IN VARCHAR2 default NULL,
  GenisysAttValues IN VARCHAR2 default NULL,
  XGenModify IN VARCHAR2 default NULL,
  MirusModify IN VARCHAR2 default NULL,
  GenisysModify IN VARCHAR2 default NULL
  )
  
  IS
  
  strSQLXGen VARCHAR (1000);
  strSQLMirus VARCHAR (1000);
  strSQLGenisys VARCHAR (1000);
  nMaxMDMCode INTEGER.
  ifExist INTEGER;
  
  /******************************************************************************
  NAME: proc_MDM_InsertCntryDetails
  PURPOSE:
  
  REVISIONS:
  Worm Date Description of the author
  --------- ---------- --------------- ------------------------------------
  1.0 03/07/2009 1. Created this procedure.
  
  NOTES:
  
  Keywords to replace automatically available Auto:
  Object name: proc_MDM_InsertCntryDetails
  SYSDATE: 03/07/2009
  Date and time: 03/07/2009, 19:11:20 and 03/07/2009-19:11:20
  User name: (put in TOAD Options, editor of the procedure)
  Name of the table: (defined in the dialog box "New PL/SQL object")
  
  ******************************************************************************/
  BEGIN
  
  COUNT (*) of SELECT INTO ifExist OF MDM_COUNTRY_MASTER;
  
  IfExist IF = 0 THEN
  SELECT 1 INTO nMaxMDMCode FROM DUAL;
  ON THE OTHER
  SELECT MAX (MDM_CODE) + 1 IN MDM_COUNTRY_MASTER nMaxMDMCode;
  END IF;
  
  
  IF Action = "add" THEN
  
  INSERT INTO MDM_COUNTRY_MASTER(MDM_CODE,MDM_MASTER_CODE,MDM_DESCRIPTION,MDM_USER,MDM_EXIST,MDM_STATUS,MDM_ACTION,DAT_INSERT_DATE,DAT_INSERTED_BY)
  VALUES(nMaxMDMCode,CntryMasterCode,CntryName,MDMUser,exist,Status,action,sysdate,Inserted_By);
  
  strSQLXGen: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) XGenAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  "VALUES (' |)" nMaxMDMCode | ',' || '''' || "XGen | '''' || ',1,' || XGenAttValues | ',' || '''' || Inserted_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLXGen;
  
  strSQLMirus: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) MirusAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  "VALUES (' |)" nMaxMDMCode | ',' || '''' || "Mirus | '''' || ',2,' || MirusAttValues | ',' || '''' || Inserted_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLMirus;
  
  strSQLGenisys: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) GenisysAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  "VALUES (' |)" nMaxMDMCode | ',' || '''' || "Genisys | '''' || ',3,' || GenisysAttValues | ',' || '''' || Inserted_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLGenisys;
  
  ON THE OTHER
  
  
  
  UPDATE MDM_COUNTRY_MASTER
  SET MDM_DESCRIPTION = CntryName, DAT_MODIFIED_BY = Modified_By, DAT_MODIFY_DATE = SYSDATE.
  MDM_USER = MDMUser, MDM_ACTION = Action, MDM_STATUS = status MDM_EXIST = exist WHERE MDM_CODE = Mdm_Code;
  
  
  
  
  COUNT (*) of SELECT INTO ifExist FROM MDM_COUNTRY_MAPPING WHERE SYSTEM_CODE = 1 AND MDM_CODE = Mdm_Code;
  
  IfExist IF = 0 THEN
  
  strSQLXGen: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) XGenAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  ' VALUES(' ||) Mdm_Code | ',' || '''' || "XGen | '''' || ',1,' || XGenAttValues | ',' || '''' || Modified_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLXGen;
  
  ON THE OTHER
  strSQLXGen: = "UPDATE MDM_COUNTRY_MAPPING SET | XGenModify | ', DAT_MODIFY_DATE = SYSDATE, DAT_MODIFIED_BY =' | '''' || Modified_By | '''' || "WHERE MDM_CODE =' | ' Mdm_Code | "and SYSTEM_CODE = 1';
  
  EXECUTE IMMEDIATE strSQLXGen;
  
  END IF;
  
  
  COUNT (*) of SELECT INTO ifExist FROM MDM_COUNTRY_MAPPING WHERE SYSTEM_CODE = 2 AND MDM_CODE = Mdm_Code;
  
  IfExist IF = 0 THEN
  
  strSQLMirus: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) MirusAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  ' VALUES(' ||) Mdm_Code | ',' || '''' || "Mirus | '''' || ',2,' || MirusAttValues | ',' || '''' || Modified_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLMirus;
  
  ON THE OTHER
  strSQLMirus: = "UPDATE MDM_COUNTRY_MAPPING SET | MirusModify | ', DAT_MODIFY_DATE = SYSDATE, DAT_MODIFIED_BY =' | '''' || Modified_By | '''' || "WHERE MDM_CODE =' | ' Mdm_Code | "and SYSTEM_CODE = 2';
  
  EXECUTE IMMEDIATE strSQLMirus;
  
  END IF;
  
  
  COUNT (*) of SELECT INTO ifExist FROM MDM_COUNTRY_MAPPING WHERE SYSTEM_CODE = 3 AND MDM_CODE = Mdm_Code;
  
  IfExist IF = 0 THEN
  
  strSQLGenisys: = ' INSERT IN MDM_COUNTRY_MAPPING (MDM_CODE, SYSTEM_NAME, SYSTEM_CODE,' |) GenisysAttNames | DAT_INSERTED_BY, DAT_INSERT_DATE) ' |
  ' VALUES(' ||) Mdm_Code | ',' || '''' || "Genisys | '''' || ',3,' || GenisysAttValues | ',' || '''' || Modified_By | '''' || SYSDATE)';
  
  EXECUTE IMMEDIATE strSQLGenisys;
  
  ON THE OTHER
  strSQLGenisys: = "UPDATE MDM_COUNTRY_MAPPING SET | GenisysModify | ', DAT_MODIFY_DATE = SYSDATE, DAT_MODIFIED_BY =' | '''' || Modified_By | '''' || "WHERE MDM_CODE =' | ' Mdm_Code | "and SYSTEM_CODE = 3';
  
  EXECUTE IMMEDIATE strSQLGenisys;
  
  END IF;
  
  
  
  END IF;
  
  
  
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  NULL;
  WHILE OTHERS THEN
  -Consider recording the error and then re-raise
  LIFT;
  END proc_MDM_InsertCntryDetails;
  /
  
  
  Thank you

  >
  WHERE mdm_code = mdm_code
  >

  This will always be value true - similar to WHERE 1 = 1.

  You typed it wrong or is the same as the variable column name? If they are the same test rename one of them.

• Unable to get the correct rules table result when the State is unknown

  Hi all

  I use OPA version 10.4. I'm writing a rule by using a table of rules. Requirement is such that when the State is unknown then conclusion should evaluate to 'Others' (for example). Now, I have a condition (text) attribute and attribute of conclusion (text). Now when the condition attribute value is "abc" then attribute of the conclusion must be "xyz" but when the condition attribute is 'unknown' or anything else then attribute conclusion must be 'other '. I tried to implement this in the two table rules in word doc and also in excel table of rule but failed to get the desired result. It assesses the 'unknown' conclusion when the condition attribute is 'unknown '. Please suggest.

  Thank you

  Mounia

  

  

  Hi Pascal,.

  As the table of treaty rules the rules in the top-down approach, so the 'unknown' State should be written before the value condition.

  If she meets the condition of value firstly she neglects the unknown state and gives the value of the conclusion as 'unknown '.

  Hi Sean,.

  Want your comments on that.

  See you soon,.

  Arup

• Masking color theme group when the color theme tool

  How do hide you Palette of color theme?

  You're talking about the Adobe color theme Panel (window > colors > Adobe color themes)? If this is the case, just close it.

  Or do you mean the floating palette that appears when you use the color theme tool. If the latter, press ESC to remove and forget what it selected last.

• Oppose multiple positions and colors - how to keep the chosen position even when the color change?

  I have a makeover game where you can change the position of the hands of my model and also the color of the skin. In a clip with a skin color, there are a all hands possible positions. But when you click to change the color in the hands of the jumps to the first keyframe position, just not to the position previously selected. How can I handle this, so that regardless of the color of skin chosen, in the hands of the post to be selected and the movieclip jumps to the first keyframe with the first position of hands? Or y at - it another way to tie the color of the skin and the multiple positions of the hands, but in such a way that they are not affected by the other?

  I think I understand what you did and what is the problem.  Whenever you change the movieclip of hands to be a different color, you must change the hands.hands movieclip to be on the same image as in the other color.  Keep track of which hands.hands set the framework you're and assign this anythime you change color...

  _root. Doll.Hands.gotoAndStop (1); 2, 3, etc.

  _root. Doll.Hands.Hands.gotoAndStop (positionFrame);

  Other approaches to this.

  If you use matte colors for hands, one-way ticket would use the code only to recolor the hands instead of using movieclips/frames in this way, you don't have to change the movieclip of hands for different colors, which means that you don't need that to a movieclip for positions... you essentially just recolor the hands positioned mc.

  Another approach would be to have all your main color mc in the same framework and control their visibility.  Whenever you change the position of the hand, you change all.  When you change the color, do you first all the mc color is invisible, followed immediately by the visibility of the mc of the selected color.