selection of default choice for selectOneChoice in the JSF Page in the ADF

Similar Questions

• Setting default value for selectOneChoice when the Page loads

  BPM JDev 11.1.1.5.0
  
  I have a selectOneChoice component bound to a BPM data control. You need to set a specific value as the default value when the page is loaded for the first time.

  I did the scope of the bean managed as pageFlowScope.
  Then created a variable of string in the bean called 'postal code' and its setter I wrote like:

  You can follow this approach as well. But when you call the countryCode setter? You must set the value of the variable string.

  Then, I used your code in the jspx page.

  You need to edit my code in the jspx you use a managed bean. The code will change as below.

  I was suggesting to use a variable of pageFlowScope as defined in my previous code snippet. And on pageload, set this variable. To find out how to write/execute java code before page loads refer to this post:
  http://www.baigzeeshan.com/2011/05/How-to-run-Java-code-on-every-page-load.html
  In the afterPhase of the post method, you can set the variable pageFlowScope as shown below.

  AdfFacesContext.getCurrentInstance().getPageFlowScope().put("countryCode", "IndiaIN");
  

• Selection of strength to call for listener table the ADF

  Hello

  JDev 11.1.2.4

  I wrote a custom listener selection I associate with my table of the adf.

  < af:table selectionListener = "#{pageFlowScope.rangePaging.singleSelectionListener}" >

  It is called as expected every time except when I click on a line that is already selected. For example, you have a table with 1 row, the row is selected by default after the initial rendering. Then you click on a link that is of type int row. The selection listener is supposed to be called, but it is not. I guess the selection listener is too smart, that he is not triggered because the line is already selected.

  Is there a way to force the listener to selection to be called even if the line is already selected?

  Thank you

  Hello

  I guess you need the selection of the event initially. to do this, remove the property selectedRowKeys, then by default no line will be selected.

  Kind regards

  Birame

• can I select a default font for menus dvd-'apply to all '. 2 selection doesn't seem to work.

  in Pre12 should I do to select a font by default for menus dvd-'apply to all... '. 2 selection doesn't seem to work. I want to use times new roman for everything and it's a pain scroll through the list of fonts for each title.  OR Alternatively - delete a large number of fonts in the list?

  grantham8

  What version of Premiere Elements you are using and on what computer operating system is running?

  The answer to your question "Pre12 can I select a default font for menus dvd.

  as I see that's no (any version).

  These are fonts, fonts siize and font color in the PSD file of the theme that is being back from the movie first elements Menu customization area. Either:

  a. do you the menu customization possibilities they present

  or

  b. If you want to than this menu always present with all by using the desired font, and then change PSD file of the theme on the hard drive (with Photoshop CS or higher).

  It is my understanding that Premiere Elements uses the fonts are fonts of Windows. Even if you could selectively delete all fonts in a given menu, I think that the end result would be a menu that didn't work rather than one that is lacking in your policy of survival because there was no other to select.

  Yet once, the police of a particular topic is predetermined by the police which was designed in the .psd for the menu file.

  If you want information on how to change the fonts of your theme at the .psd level, let me know the involved menu and details the police change., point by point, buttons, titles...

  Please review and consider.

  Thank you.

  RTA

• Define a default choice for a web form field list

  Hi guys,.

  I created another pic of lists of countries and I want to make the selection list 'default' (rather than the standard Eloqua country list).

  That is when I create a web form and add the field 'Country', I want to default Eloqua to my list of selection.

  I searched the coatings high and impossible to find a way to do. Can anyone help?

  He solved.

  Configuration > fields & views

  Click on the Contact fields > country

  Select a new value from the list of choices

  Save

• required (asterisk) for selectonechoice in the table

  Hello

  I created a table. Table has the value and the label of two columns

  label is selectonechoice and text input value

  To view the selectonechoice as the label I did readonly = true

  but bacause of the asterisk sign is not displayed for the field mandatory also tool tip is not displayed for the field that are necessary.

  Required property used for text entries (value) and the selectoncechoice (label)

  With the help of Studio Edition Version 11.1.1.9.0

  Help, please

  Label is a selectOneChoice? a little weird. What is the requirement?

  And if necessary the sign didn't come for soc, surround with af: panelLabelAndMessage set true to the panelLabelAndMessage required true or showRequired and try.

• Default location for pictures of the store iprocurement

  Hello

  We are implementing iprocurement.

  What is the default location for image bank iprocurement.

  In our case the POR profile option: hosted Images directory is empty.

  If it is empty, which is the default location.

  Is it a good idea to map profile POR option: directory of Images hosted at /OA_MEDIA/

  Kind regards

  Anita

  /OA_MEDIA/ is a virtual directory and points $OA_MEDIA path on the server.

  If you have access to Oracle Application Server, and then follow these steps. Or ask your DBA application the following steps and give you the path of directory.

  1. open a new terminal session > log in as 'applmgr.

  2. install the application environment by running the file ".env' application.

  3. simply type echo $OA_MEDIA. The returned path is the path of the virtual directory of/OA_MEDIA /.

  If you are about R12.2 or higher then the output will be something like this - / u01/oracle/SCREWS/fs1/EBSapps/comn/java/classes/oracle/apps/media. When the SCREW is the context and the fs1 is the base application directory direct environment.

  Concerning

  Kamal Khan

  www.AclNZ.com

• The use of tables of database for authentication in the ADF

  Hello

  I need to use my user table in the database for authentication in ADF (adf 11.1.2).

  I have 3 categories: agent admin and user is unique, each has its own page, logging, the application checks the type of user and directs its jsf task or the page of the jsf page flow.

  I have a user with the type attribute table

  HOW CAN I MAKE THIS PRAYER.

  Hello

  See links below.

  Whatever Fusion Middleware: Tables database user to implement authentication in the ADF

  Java / Oracle SOA blog: the use of tables of database as in WebLogic authentication provider

• Default fonts for tools of the typewriter and the text box?

  Is there a way to change the default font, size, and color for the tools of the typewriter and the text box?

  It's extremely embarrassing use of the typewriter to fill out a PDF file (without the activated forms) and having to change the font and size each time.

  Similarly, I would like to change the default font and the size of the tool text box.  I would also like to set it up so it is not a box around the text.  Is this possible?

  It still works. I did mine and changed to Helvetica from Times New Roman, and black to red and held it for a new document.

• Problem with the default value for OAMessageTextInputBean to the controller layout

  Hello

  I encountered this problem when I expand a controller for the page create a work request (/ oracle/apps/eam/workrequest/webui/EAM_WR_WORK_REQUEST_DETAIL_PL). My goal is to re - fill OAMessageTextInputBean 'Additional Description' after the user clicks "Save" or "apply". When I try to change the value of another field, it works correctly, the problem persists for 'Description Addidional' more precisely. I don't know that I have the correct id (I took it from xml received by jdr_utils.printdocument). The journal does not all controllers running after the attempt to set the value.

  Compare these logs:

  [21]:PROCEDURE:[xxfideltronik.oracle.apps.eam.workrequest.webui.xxPageRegionCO]:Goosfraba, pre-added!
  [21]:EVENT:[fnd.framework.webui.OAMessageTextInputHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageTextInputHelper: View:null ,Attribute:EAM_WR_WORK_REQUEST_DETAIL_PL426_EamWrRqlog , Return Value without datatype conversion :4321
  [21]:PROCEDURE:[xxfideltronik.oracle.apps.eam.workrequest.webui.xxPageRegionCO]:Goosfraba, added!
  

  [Descriptive information, does not work]

  and:

  [64]:PROCEDURE:[xxfideltronik.oracle.apps.eam.workrequest.webui.xxPageRegionCO]:Goosfraba, pre-added!
  [64]:EVENT:[fnd.framework.webui.OAMessageTextInputHelper]:OAF LOG: Event : Get Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageTextInputHelper: View:RequestDetailsVO ,Attribute:PhoneNumber , Return Value without datatype conversion :null
  [64]:EVENT:[fnd.framework.webui.OAMessageTextInputHelper]:OAF LOG: Event : Set Attribute Value, in: oracle.apps.fnd.framework.webui.OAMessageTextInputHelper: OldValue:null ,New Value:4312
  [64]:PROCEDURE:[xxfideltronik.oracle.apps.eam.workrequest.webui.xxPageRegionCO]:Goosfraba, added!
  

  [Phone number, works fine]

  Here is my code for the method of the processFormRequest controller:

  public void processFormRequest(OAPageContext pgCtx, OAWebBean wBean){
       super.processFormRequest(pgCtx, wBean);
      
       String description = pgCtx.getParameter("EamWrRqlog");
       log("Goosfraba: " + description, pgCtx);
  
       if(description != null){
            OAMessageTextInputBean additionalDescription = (OAMessageTextInputBean) wBean.findChildRecursive("EamWrRqlog");
            if(additionalDescription != null){
                 log("Goosfraba, pre-added!", pgCtx);
                 additionalDescription.setValue(pgCtx, description);
                 log("Goosfraba, added!", pgCtx);
            }
       }
  }
  

  A solution would be: -.

  1. create a transitional VO with an attribute, LongDescription.

  2 associate this attribute with the EamWrRqlog field.

  3. in the processFormRequest, set the TransientVO attribute value

• Looking for table of the ADF

  I use Mysql DB in my application, and I need to call including FullTextSearch installation.
  
  For example, I need call an action as below;
  
  SELECT * FROM articles WHERE MATCH (title, body) AGAINST ('PHP')
  
  And according to the result set, I need to filter my rows in the table. How can I realize this situation?
  
  
  jdev: 11.1.2.3.0

  I assume you are using ADF? (from previous posts)
  So, why you do not create view object based on the sql query?

  Dario

• How to get the selected row in a programmatic table of the ADF (table generated from a bean)

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  How to get the selected line in a programmatic (using a SortableModel custom not a display object) ADF table (generated from a bean)?

  
  

  We are trying to get the selected row in a bean of a programmatic ADF table to retrieve data based on the selected line.

  
  

  Any idea?
  

  Well, you can use selectionListener to set the selected line to a variable of bean (but this bean must be in extended view or some superiors)

  Something like this: http://www.awasthiashish.com/2015/07/get-selected-row-singlemultiple-from.html

  Dario

• Framework for logging to the ADF

  HIE
  
  For my ADF application, what are the options provided by Oracle to make the registration to be able to debug production env later?
  
  Vik

  http://database.in2p3.fr/doc/Oracle/Oracle_Application_Server_10_Release_3/Web.1013/b25947/web_testdebug004.htm

  hope this helps... !

• How to set the default value of the component selectOneChoice in the table to the ADF

  Hi all

  I use jdev 11.1.1.6.0 version.

  I used an adf table in which an attribute is selectOnceChoice.

  To create the table and selectOneChoice I used the data control java bean.

  and drag and drop a table and after that I have drag and drop one of the attributes as selectonechoice and linked with the return of the method list as < key, value > pair.

  I want the default value to select only one option in each attribute rows.

  I checked with simillar issue on post next, but not yet resolved.

  My jspx code is

  
  <af:column id="c11"
                                           headerText="Invoice To" >
                                      <af:outputText value="#{row.invoiceTo}" id="ot19"/>
  <af:selectOneChoice value="#{bindings.invoiceTo.inputValue}"
                                                      label="#{bindings.invoiceTo.label}"
                                                      required="#{bindings.invoiceTo.hints.mandatory}"
                                                      shortDesc="#{bindings.invoiceTo.hints.tooltip}"
                                                      id="soc3"
                                                      autoSubmit="true"
                                                      valuePassThru="true">
                                    <f:selectItems value="#{bindings.invoiceTo.items}"
                                                   id="si4"/>
                                  </af:selectOneChoice>
  </af:column>
  
  
  

  where invoiceTo is the table attribute and the invoiceTo attribute is dragged and dropped as a SOC function list Source data mapped data value with the List attribute

  and the display attribute

  Data value = invoiceTo List = lovMasterKey attribute

  Display attribute = lovMasterValue

  that list is maintained at < lovMasterKey, lovMasterValue >

  According to the value of invoiceTo line, it should show as default value is selectOneChoice, but its showing no not as a default value.

  Please, help me how set the default value of selectOneChoice in the table according to each value line invoiceTo.

  Thank you all for the help on this issue.

  Problem has been resolved.

  Reason for this was used

  It is solved using code used for the list built for selectoneChoice more

    List lovMasterList = new ArrayList();
  
  SelectItem siItem = new SelectItem();                      
  
  siItem.setLabel(objAfCmnLovMasterListVO1.getLovMasterValue());
  
  siItem.setValue(objAfCmnLovMasterListVO1.getLovMasterKey());
  
    lovMasterList.add(siItem);
  

  Now, I used the code where the line below. InvoiceTo is the key and row.invoiceToItems are the list of articles for selectOneChoice.

  Thank you very much...

• Definition of default font for the text box in Acrobat XI

  Projects that I am working, I scan in all copies of documents I acquire and add at the bottom of the first page of the relevant information, that is, the source of recordings, volume, and page, using the tool text box (or typewriter).

  In earlier versions of Acrobat, I could choose a font style once and it has carried over to any subsequent document, I proceeded. In Acrobat Pro XI, it always happens as Minion Pro and I need to change in Arial Black every time. Is there a way to define Arial Black as the default choice for the text box?

  For what it's worth, I use Windows 8.

  Thank you.

  I came across a work-around for this for Acrobat Pro XI.  It is a process in two steps and a little heavy, but it works.

  First, go and add your text box and everything what you need text.  After having done that, select all the text, then bring up a bar of properties of the text box text by placing your cursor in the toolbar area and select 'Properties Bar' top of the page, right click or simply press Ctrl + E.  The properties of the text box bar will appear (floating, but not all the time).  Let the selected text, and then change the font properties to what you need.

  Secondly, deselect the text, select the border of the text box, make a right click and then select "Make current properties default" in the pop-up window.  FYI, the property bar to the box text will be changed from a floating real estate bar at this time, so if you need to make more detailed changes, simply close the bar and back to Ctrl + E to call upwards and make other changes.

  I use Windows 7 64-bit.