Using the wireless mouse at startup
Hello
I use iCloud account so El Capitan requires me to connect to the startup.
I bought a new mouse (associated without a dongle) wireless that I would use to select the user to the login screen, but it does not work. Can I use another mouse with a dongle, or I can use the magic mouse (which is a point of total sale).
I use a Logitech MX Anywhere 2. Once I log in, it works perfectly. Any ideas?
MacBook Pro 13 early 2015
I found this on their Web site. Not sure if this can help. http://support.logitech.com/en_ca/article/Connect-the-MX-Anywhere-2-mouse-to-a-B luetooth-device? product = a0qi0000008tB99AAE #mac_osx
Kim
Tags: Mac OS & System Software
Similar Questions
-
Pro L10: After using a wireless mouse, the touch pad has stopped working
Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.
I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.
Can you help me?
Hello
It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
I guess that you are having regular problems with a USB mouse. -
Can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse?
Hi, as the title says: can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse? I have the kit, but the mouse is to bulky for me and I would use a mouse Microsoft Mobile 4000 but with the same receiver as the keyboard of the kit, is it possible? Thank you
Hello
looks at it's not going to work. Wireless products are programmed to be used with a specific key, so they won't work on another dongle.
B Eddie
-
How to disable the touch pad so I can use my wireless mouse?
How can I disable the touchpad on my SONY VAIO now that I use a wireless mouse?The problem is that the cursor continues to jump back when I type, then this morrectiony sentence inserted into itself. As a demonstration that I type this this setence without any c. REA touch pad is soplutiobn PLease help! L probme asnand I guess that this turning pointIt's theHelp, please!Caroline ReidSee http://esupport.sony.com/EN/tutorials/pc/cpvct000001_text.pdf (don't forget the warning to connect an external mouse before disabling the touchpad).
Another version:
http://GeekDrop.com/content/how-to-disable-the-touch-pad-on-Sony-VAIO-and-of-course-enable-it-again -
I have a dell laptop with windows xp I want to use a wireless mouse but cannot understand how to turn off the pc mouse
Thank you for your help, I saved it for future use. My computer it turns out that's very smart after all the fourth test of every thing, I turned it on and the mouse remotely worked, thanks again
-
How to do a right click on the wireless mouse?
Right-click on the wireless mouse?
Open System Preferences > mouse and select the tab k Point & clickthen the tab more gestures to configure your mouse.
-
Can I use my printer manually instead of using the wireless connection?
Can I use my printer manually instead of using the wireless connection?
cbg_37 wrote:
It is an OfficeJet Pro 8610.
Hello
It has a print USB 2.0 port, so you can use the printer USB cable to connect it to your computer. This cable may be not in the box, please check if you first buy one (around $5 to $ 10). It is similar to:
Kind regards.
-
Hi people, I think I found a bug in the hyperlinkctrl.c custom control, after the update/upgrade an old project CVI.
I found when I started using the "VAL_POINTING_FINGER_CURSOR" mouse in my UI, when adding a new hyperlink control.
The error is recoverable error: ' from the mouse cursor is not valid.
This error breaks in RunUserInterface (never seen anything like this before and I use CVI since version 3.1).
This happens whenever I mouse - hovering anywhere on the Panel that contains the new hyperlink control.
I also had a hack temporary to solve the problem, for now, I'll pass it along to this announcement...
The hyperlink control's source code is located in
\toolslib\custctrl\hyperlinkctrl.c The bug/problem lies in the service of reminder (of HyperLinkPanelCallback), specifically in lines 460 to 465.
This hyperlink control wants to use the VAL_POINTING_FINGER_CURSOR as its default cursor when you hover over the custom hyperlink.
However, if you already use 'VAL_POINTING_FINGER_CURSOR' in your user interface, the branch which verifies that you use what he thinks is 'his own' thread-safe mouse cursor ID, so that can reset it by using his "token concatenation" - created macro "GetTsvCursor", is not an 'else' branch to protect the picture when you actually use the cursor pointing finger... where the error that the mouse cursor is not valid. Here is the snippet of these lines.
The mouse is not over a hyperlink
If (cursor is VAL_POINTING_FINGER_CURSOR)
{
Reset the cursor to the previous cached cursor
cursor = GetTsvCursor();
errChk (SetMouseCursor (cursor));... etc...
}
So my hack was to change the type of cursor to "VAL_CHECK_CURSOR" in place and place the cursor of "VAL_POINTING_FINGER_CURSOR" in three locations in this function, then rebuilt files x 86 and x 64.
Hey Luis, finally win a free T-shirt of LabWindows/CVI with not only have reported this bug, but also to give the precise location of the source, as well as a work around?
:^)
JB
In the meantime, I have submitted a bug with ID #545203 report to track down this problem.
-Johannes
-
When the window 8.1 do a update my wireless printer goes offline!
How can I get this back online in wireless mode.
I have to use the usb to print. It take away my freedom
Provost
Thanks for the tips!
I discovered that I was looking in the wrong place for a solution!
the laptop was not the answer.
I had to go to the printer and a wireless network test, because the test and reset the network using the Wireless Setup Wizard. all is well now!
Thanks again for your help.
Artret
-
After you install a HD on my Acer Aspire One wireless mouse, the Synaptics Touchpad works not at all even if feataure troubleshooting indicates it works correctly. Default is always to the wireless mouse. I tried to deavtivating the wireless mouse and reset to factory manufacturer. This does not re-enable the Touchpad.
Try Fn + F7. This option turns the touchpad on and outside.
-
How do I change the batteries in the wireless mouse
I can't find Vault battery to change the batteries in the wireless mouse, please show me where.
Hi mydavid0615,
Without knowing the manufacturer, the brand and model of the mouse, it is difficult to say. They are all different.
But that being said, I've seen most have a button or a push bottom bar who, when you move it going to go get the cover of the box that contains the batteries (I found is normally on the top at the back of the mouse, but you can not and should not attempt to open until you release as indicated).
If this does not help, then please provide us with the information above on the mouse and we will try to help you the information on its website.
Good luck!
-
Windpws Mail & Wi - Fi
I just installed a TalkTalk wireless router which seems to have installed correctly. However when I try to send and receive e-mail using Windows Mail, she wants to use a made up connection. How can I use the wireless connection? Thank you very much, Dianthus MJ.
Go to tools | Accounts | Mail | Properties | Connection and check or change the connection properties. You will need to remove the account and then add it again, but try first and also check tools | Options | Connections.
Steve
-
Original title: right click on the mouse itself activating
I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.
I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.
Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?
Try to install the drivers from this link and check.
http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167
-
I get a message on my screen of Microsoft IntelliPoint that reads: the wireless mouse battery level is extremely low. Replace the batteries now to keep the operation of the wireless mouse. How to replace or place where the batteries?
This will give you some clues
http://www.ehow.com/how_6763222_replace-battery-Microsoft-mouse.html
-
What causes use of the wireless mouse a lot of included
I have to change my battreis in my wireless mouse a lot and I wondered why
Hi carolyn
The mouse you use it is obvious that the battery drains there don't you try rechargeable batteries and save money for yourself
Maybe you are looking for
-
19-2113w HP: hp 19-2113w while a replacement screen
I have a hp all-in-one 19-2113w ' g4b06AA 'I have cracked the screen and need to replace it. " It's not under warranty. Can you please tell me the number of replacement screen model. I can still use most of the screen, but here to keep it going until
-
Compaq 15 laptop: USB bus controllers
Hello all, I have problem with 'USB bus controllers', in Device Manager, there are the yellow triangle in the "other devices" section, only 1 of the three usb ports on my laptop work I assume that these two problems are related? I installed win7 x 64
-
Redeclenchables buffered count task of edge
Hi all I worked on 'Buffered Retriggerable counting task dashboard' on a single window input channel, let me describe what I want to achieve: Create a CI to count the rising edges finished with the (for example external sample clock Dev1/di/SampleClo
-
As I changed to Google for Internet Explorer can't do have shortcuts on the desktop; Why?
I can no longer put a shortcut on the desktop... WHY?
-
Why my SSD C: HD so slow running inside the XP Mode
I come to install a Verbatim 256 GB SATA II SSD as my HD C: and find that inside my Win 7 Pro XP Mode using the HD test HD Tune untility speed, it only shows the speed of transfer around 9-10 MB/s Also the startup in XP Mode is extremely slow I also