Selection of the method of Installation of VMWare Fusion 7

Similar Questions

• We noticed after our R12.1.1 and upgrade 12.1.3 Federal is not displayed and we don't have it selected on the choice of installation of ideas?

  We noticed after our R12.1.1 and upgrade 12.1.3 Federal is not displayed and we don't have it selected on the choice of installation of ideas?

  I never said that the installation is not very well

  You will need to consider additional steps for this product (set to level before and after upgrade) as mentioned in the doc.

  If the relocation is not an option, then connect a SR and see if the support for Oracle can provide workaround to change the status of this product.

  Thank you

  Hussein

• Selection of the country while installation

  Hi all
  
  I want to know, what are the effects of country selection during the installation of Hyperion Planning 9.3.1? What will change in the application, if I choose UK instead of the US for example or it has no effect.
  
  Thank you for your help.

  Hello

  If you're talking about when you get this message
  "This Setup program displays information based on the location of the installation. "Choose from the following list of countries:

  So it doesn't really matter what get you, the selection simply sets the license agreement message you see on the next screen.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Cannot find the Windows 7 Desktop in VMWare Fusion

  Hi all

  I installed VMWare Fusion on my mac.  Works very well.  However, I can't find my windows desktop.  The only thing I can find is Internet Explorer.  I know when I installed it, I clicked on something after the small bar at the top of the screen, but I can't remember what.  Now, in VMWare fusion window, under Windows7, it shows only a gray screen with an icon of recycle bin on it.

  Any thoughts?

  Looks like you spent at the sight of the unit.

  Just move your mouse up to the center of the screen and should display the VMware Menu and then click on the view menu and select full screen or single window or you can open the menu either VMware Fusion application on OS X, Windows applications menu bar or Dock VMware Fusion tile with a ctrl-click.

• Installation of VMware Fusion Technology Preview 2014 presents installation of VMware Fusion 6 screens.

  I guess the VMware Fusion Technology Preview 2014 is for what will VMware Fusion 7 and I understand it's the first preview, however, is not the way to start off the coast and as the saying goes, leaves a bad taste!

  Thanks for the research of this issue. We already have a PR of follow up this issue. We will treat these UI things as early as possible in the future.

• Port sharing ethernet physycal between the Mavericks and Ubuntu using VMware Fusion

  Hi all

  I use VMware Fusion on Mac OS Mavericks 6.0.2, and I need to connect a physical device to manage using a Ubuntu 12.04 VM. In addition, the host computer is connected to a public network, using a Wi - Fi connection.

  I put the ip of the physical device by USB configuration, but I was unable to get by using ethernet or the guest or the host computer. I tried to configure the NIC of the NAT guest, as well as the bridge too. Nothing seems to work. I don't know if the virtual machine is able to handle the physical Ethernet port.

  Ideas for the configuration of the network device (NAT, bridget, etc.) or the ip configuration?

  Thank you very much in advance.

  Sorry, I left an important step.  You must also configure the host's Ethernet card to use a manual IP address in the same subnet assigned to the Virtual Machine and the sensor.

  1. connect sensor card via USB and set the IP address and subnet mask, disconnect USB.

  2. connect the sensor to the host (Mac) Port Ethernet card.

  3. in the Apple menu > Preferences system... > network > Ethernet > configure IPv4: manually, then set the IP address: and the subnet mask: properly.

  4. from the Virtual Machine settings > network adapter > Bridged Networking > Ethernet

  5. in the guest OS virtual machine to set manually the appropriate IP address and subnet mask.

  Example:

  The IP address of the host on the Ethernet adapter: 192.168.3.1 subnet mask: 255.255.255.0

  Guest OS Ethernet adapter IP address: 192.168.3.2, subnet mask: 255.255.255.0

  Sensor onboard IP address of the Ethernet card: 192.168.3.3, subnet mask: 255.255.255.0

  In this example, the sensor Council will be addressable by the host or the guest to 192.168.3.3.

  BTW I just tested it using my Thunderbolt Display Ethernet with a normal cable (straight not crossed) RJ45 connected directly to a device addressable IP, VMware Fusion and a virtual Windows machine.  Although the same works with an Ubuntu VM as I have in the past also.

  This should work without any problem but make sure that the firewall or other security software on the host and guest are not blocking communications!

• Identity of the wrong optical drive in VMWare Fusion 5.0

  I've just upgraded to the latest version of VMWare Fusion 5.0.2

  I have a Mac Mini 2.3 GHz quad core i7 machine with 16 GB of RAM

  I am running Mac OSX 10.8.2

  I also just upgraded my windows from Windows XP Professional to Windows 8 Pro

  When you try to install the software (Cyberlink) and drivers for my new LG Blu - Ray Burner (model BE14NU40), I get an error message saying that the software is ONLY for LG brand drives.  This seems odd, since it's what I have.  When I checked the Device Manager in Windows 8 I've seen that for some reason, VMWare changes the identity of the optical drive to a NEC for some reason any... which prevents the software and drivers from loading.

  Does anyone have an idea how to fix the identity changed my optical in VMWare Player so that Windows 8 Pro will know that it IS really an LG drive?

  Thank you...

  They probably had you to what is covered by: Troubleshooting USB devices using USB (1025256) molten oddities

• On the method of installation of Microsoft Applocale on window 8 v1.0

  According to the information indicated on Microsoft Website, Microsoft Applocale Version 1.0 is compatible on Windows Server 2003 and Windows XP.

  http://www.Microsoft.com/en-HK/Download/details.aspx?ID=13209

  

  However, I search information on google, he said that Microsoft Applocale Version 1.0 is compatible on window 8.

  http://www.Microsoft.com/en-us/Windows/compatibility/CompatCenter/ProductDetailsViewer?type=software&name=Microsoft%20AppLocale&vendor=Microsoft&ModelOrVersion=1&locale=1033&tempOsid=Windows%208

  

  Obtained after advice from Microsoft Support Center, the hotline staff has provided the solution as below

  http://answers.Microsoft.com/zh-Hant/Windows/Forum/windows_8-Winapps/%E5%B7%B2%E6%B8%AC%E8%A9%A6%E5%87%BAmicrosoft/ffb3fbef-1da9-45a5-bb54-2522a1350e28?msgId=b5677493-fd1d-4A4B-ac93-1ae8d9570080

  

  I tried the approach and found that the installation may change the language of any window, however, on the individual installed the program on 8 window, does not seem to enter into force.

  Does anyone have any comment on install Microsoft Applocale on window 8 1.0 Version? Please notify. Thank you very much.

  Can refer to the solution here.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/about-the-installation-method-of-Microsoft/1c334708-929a-44C9-856A-bce4ee3f5872

  Follow the steps to run in compatibility mode:

  (a) access to the start screen

  (b) press Windows key + C on your keyboard to show the charms (if you have a touch screen: touch the right edge of your screen and slide your finger to the center of the screen to display the bar of charms)

  (c) search for Troubleshooting, click settings in the right-hand column.

  (d) click on troubleshooting. Click run programs made for previous versions of Windows

  (e) click on Next, select not listed. Click Next

  (f) click Browse and select the driver file you downloaded.

  (g) click on Next, click program troubleshooting

  (h) check the program worked in earlier versions of Windows but won't install or run now

  (i) click next , select the latest OS known functional for this driver (probably Windows 7)

  (j) click Next

• Genuine Windows 7 on MacBook Pro running in the partition, BootCamp with VMware Fusion 3.1

  I'm having a problem with Windows 7 Ultimate 32 bit.

  I installed Windows 7 on my Bootcamp partition and until recently he worked well as well when I ran into VMWare Fusion.

  When I boot on my Windows 7 on Bootcamp partition, everything is OK.  But then when I run it in VMWare Fusion it says that my copy is not genuine.

  I just went through the automated phone system and entered the codes, and so now while I'm running Fusion Windows is genuine.

  I fear, however, that when I return to the execution of the partition, Bootcamp, Windows will say that is not true, once again.

  Only, I have a copy of Windows 7 and can only run from the VMWare Fusion or Bootcamp partition at any time.

  How can I fix it if Windows is more said that it is not authentic, when I switch from a training camp and VMWare Fusion?

  I need to be able to run Windows while I'm on the side of Mac at the same time

  Any help would be greatly appreciated.

  If you used the same Windows Installer Bootcamp, VMWare Fusion product key, there is the question.  You can only install and activate a 1 license of Windows 7.  The second installation requires own license that you can buy on the Microsoft Store. Carey Frisch

• VMware Tools missing in the Installation of VMware Player 7

  Hi all

  If I try to install/upgrade to update VMware Tools after the Installation of VMware Player 7 no ISO will be connected to the virtual machine.

  I checked the directory of Installation of VMware Player for the ISOs of the tools but no ISOs are there.

  Can you help me out of this Situation or is it a missing element in the installer?

  Thank you

  Michael

  I just downloaded VMware-player - 7.0.0 - 2305329.exe and installed under Windows 7 x 64 and had no problems with it automatically detect installed VMware Tools to the guest operating system to be downloaded and successfully downloaded.  Having said that, have you tried? : Player > file > Preferences... > download now all components

  Maybe something is blocking you to download the VMware tools.

  You could also do it manually by using the following tools from VMware for VMware Player 7.0.0.

  • Tools-freebsd - 9.9.0.exe.tar
  • Tools-linux - 9.9.0.exe.tar
  • Tools-netware - 9.9.0.exe.tar
  • Tools-solaris - 9.9.0.exe.tar
  • Tools-winPre2k - 9.9.0.exe.tar
  • tools-windows - 9.9.0.exe.tar

  Unzip the file, then run the executable result and it will silently install the file without any indication that he actually did like this isn't really so planned how to do even if it works!

• The mouse loses accuracy when running VMware Fusion in Unity view

  When I try to select items on the screen after the execution of the unit for a minute, the things I would not choose are selected.  It almost seems as if the precision of the mouse is at a loss.  Everyone knows this, and if so, do you have a solution?

  Hello

  Thank you for using the merge!  Could you please try the following suggestions to see if that helps you?

  Please try to reset the option gaming mouse by VMware Fusion in Apple menubar-> preferences-> General-> Gaming, change the option 'never optimize mouse for games '.

• What is the fastest way to convert VMWare workstation VM of ESXi?

  Hello

  Was curious to know what is the quickest way to convert a VMWare workstation VM to a VM compatible ESXi. Is the method of standalone converter VMWare at the following ADDRESS of the faster method:

  http://www.networkinghowtos.com/HOWTO/convert-virtual-machine-VMware-Workstation-ESXi-vSphere/

  Or is the method below faster? The method below mentions converter standalone is required for Workstation 8 VM but did not mention if it is needed for Workstation 8 AND HIGHER VM (ie: 9 and 10 workstation).

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1012258

  My ultimate goal is to export on a USB key and then import on the ESXi instead of convert and copy it to the network server. I'm exporting to my 3 TB USB would be faster than the copy of the virtual machine on the network. Thoughts?

  I think the second is the best option VMware KB: export of VMS in VMware Workstation to ESX/ESXi

  As you can see you can export the VM and after import on the EXS (do not use personalization)

  But uf you have Vmware Workstation 8 or higher, you can connect to the ESX Server and move the machine. If you are in the same local network and do it at a time of low workload, it would be the best option.

• 17 GB of drive space missing after the crash of vmware fusion and force restart

  During my last installation of SuSE Linux, I had to manually reboot my system because my system crashed.

  After the reboot, I deleted the virtual machine of Susa and started again installation. To my surprise 17 GB were mission on my hard drive and I can't find the files responsible for this. I checked my system of files larger than 500 MB via ' find /-size M + 500 ", but found nothing: (.)

  Do you know where are the 17 GB or where vmware fusion may have experienced a system core dump or something like that?

  Please help, I need the 17 GB for resettlement :).

  Thank you.

  Simon

  I have discovert that was missing only 3 GB of the 20 GB that I deleted before trying to install SuSE. But I deleted all the files that I specified after the crash. The trash is always empty so I'm a bit confused were are the 17 GB.

  Refer to the section of the disk space of FAQs on VMware Fusion

• Access the interface user Web de VMware Server 2 will crash Firefox 3.5

  Hello

  Trying to access the web interface installation of VMware Server 2 running on Enterprise Linux 5 update 2 64-bit

  using Mozilla Firefox 3.5 on XP causes Firefox to crash.

  Previous Firefox 3.0.11 version was able to connect and log in successfully.

  Everything in FF 3.5 cach has been deleted before trying to access the user interface. In addition, the certificate has also been removed before.

  When you access the UI first with 3.5 ist ask to accept the certificate (identical to 3.0.11)

  This will result in a blank page is displayed.

  Closing FF 3.5 (clear cache included) and re-open it at the interface of the web UI that causes FF crash.

  I m the only one to see this problem with the new Firefox 3.5 access to VMware Server 2 Web UI?

  Kind regards

  Agent of

  Although VMware-server - 2.0.1 - 156745.x86_64 has been out for a while, so I just assumed it was your version.

  Silly me

  Hope that cure your problem.

• Buy VMware Fusion 7, but the v5 download and run the merger also?

  I looked on the website of VMware, but impossible to find the answer to this question:

  A customer can purchase VMware Fusion version 7 (the current version) but also to download and run an earlier version of VMware Fusion (for example, merger v5) for temporary use? Here's an example scenario:

  * A VMware customer has two Macs. One is an old Mac running Snow Leopard, and the other is a new Mac running Mavericks or Yosemite. The customer wants to use the new Mac, go ahead (and give the old Mac). The client runs even a few applications that are not supported on what it is later than Snow Leopard (for example PowerPC applications). The obvious solution is to run these applications in a guest of Snow Leopard Server in VMware Fusion on the new Mac.

  * The problem is that Snow Leopard Server does not install as a guest operating system on the recent Mac models of the client, but it can run an existing Snow Leopard Server prompt that was created on an older Mac.

  * The client has this old Snow Leopard Mac. Unfortunately, it won't run VMware Fusion 7. It will run in VMware Fusion version 5, however. The customer wants to run VMware Fusion 5 on the old Mac to create the Snow Leopard Server on old Mac prompt, then copy the comments for the new Mac where it can run under VMware Fusion 7.

  HERE ARE MY QUESTIONS:

  --> How can the customer buy VMware Fusion 7, but also to download a copy of VMware Fusion 5 for this operation 'create a Snow Leopard Server prompt' unique on the old Mac?

  -> Will VMware provide a Fusion 5 license when the trial period expires on the old Mac before the customer can get a Snow Leopard Server comments work?

  
  

  I sent you this link last night via Message private and also posted in your other thread on the subject.  You should be able to use as disk utility here: create a disk image of physical Mac OS X install media.

  If this process fails to create an image that starts on your newer Mac, please let us know, as this is a question we want to address.  I'm not aware of any circumstances which require a downgrade from Fusion 5 install Snow Leopard Server.

  Thank you

  --

  Darius