The mouse loses accuracy when running VMware Fusion in Unity view

Similar Questions

• Cannot use mouse on Ubuntu hosted on vmware Fusion on a mac

  Hello world

  I'm running into a problem that I can't seem to understand-

  I can't get the mouse running x on Ubuntu hosted on a mac. I keep seeing these errors in the console:

  [85.137467] init: before the start of plymouth-stop status 1 last updated (1769)

  [94.768947] psmouse serio1: vmmouse: impossible to extract the data of State

  [94.769646] psmouse serio1: VMMouse to isa0060/serio1/input0 lost synchronization at byte 3

  [94.786399] psmouse serio1: vmmouse: impossible to extract the data of State

  [94.786895] psmouse serio1: VMMouse to isa0060/serio1/input0 lost synchronization at byte 3

  [94.803792] psmouse serio1: vmmouse: impossible to extract the data of State

  [94.804212] psmouse serio1: VMMouse to isa0060/serio1/input0 lost synchronization at byte 3

  [94.821407] psmouse serio1: vmmouse: impossible to extract the data of State

  [94.821913] psmouse serio1: VMMouse to isa0060/serio1/input0 lost synchronization at byte 3

  [94.838185] psmouse serio1: vmmouse: impossible to extract the data of State

  [94.838593] psmouse serio1: VMMouse to isa0060/serio1/input0 lost synchronization at byte 3

  [94.838594] psmouse serio1: show reconnect request

  and I can't tell if it's a configuration issue with vmware or a configuration problem in Ubuntu (or more likely, both).

  The mouse worked - but when I installed a window manager and improved, it seems to stop working.

  Any suggestions or points on how solve/debugging/troubleshooting this would be greatly appreciated.

  I googled around and installed xserver-synaptic modules and tried different 50 - synaptics.conf file.

  My/proc/bus/input/devices looks like this:

  Bus I: = 0019 Vendor = 0000 product = 0001 Version = 0000

  N: name = "button".

  P: Phys = LNXPWRBN/button/input0

  S: Sysfs = / devices / LNXSYSTM:00 / LNXPWRBN:00/input/input0

  SUP: Uniq =

  H: managers = event0 kbd

  B: PROP = 0

  B: EV = 3

  B: KEY = 10000000000000 0

  I: bus = 0011 Vendor = 0001 product = 0001 Version = ab41

  N: name = "keyboard at translated Set 2.

  P: Phys = isa0060/serio0/input0

  S: Sysfs = / devices/platform/i8042/serio0/entry/entry 1

  SUP: Uniq =

  H: managers = sysrq kbd event1 leds

  B: PROP = 0

  B: EV = 120013

  B: KEY = 402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe

  B: MSC = 10

  B: LED = 7

  Bus I: = 0011 Vendor = 0002 product = 0013 Version = 0006

  N: name = "VirtualPS/2 VMware VMMouse.

  P: Phys = isa0060/serio1/input1

  S: Sysfs = / devices/platform/i8042/serio1/input/4

  SUP: Uniq =

  H: managers = mouse0 event2

  B: PROP = 0

  B: EV = b

  B: KEY = 70000 0 0 0 0

  B: ABS = 3

  Bus I: = 0011 Vendor = 0002 product = 0013 Version = 0006

  N: name = "VirtualPS/2 VMware VMMouse.

  P: Phys = isa0060/serio1/input0

  S: Sysfs = / devices/platform/i8042/serio1/entry/input3

  SUP: Uniq =

  H: managers = mouse1 event3

  B: PROP = 1

  B: EV = 7

  B: KEY = 30000 0 0 0 0

  B: REL = 103

  Bus I: = 0003 vendor = 0e0f product = 0003 Version = 0110

  N: name = "VMware VMware Virtual USB Mouse"

  P: Phys = usb - 0000:02:00.0 - 1/input0

  S: Sysfs=/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/0003:0E0F:0003.0001/input/input5

  SUP: Uniq =

  H: managers = mouse2 event4 js0

  B: PROP = 0

  B: EV = 1f

  B: KEY = ffff0000 0 0 0 0

  B: REL = 140

  B: ABS = 3

  B: MSC = 10

  Bus I: = 0003 vendor = 0e0f product = 0003 Version = 0110

  N: name = "VMware VMware Virtual USB Mouse"

  P: Phys = usb - 0000:02:00.0 - 1/input1

  S: Sysfs=/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.1/0003:0E0F:0003.0002/input/input6

  SUP: Uniq =

  H: managers = mouse3 event5

  B: PROP = 0

  B: EV = 17

  B: KEY = ffff0000 0 0 0 0

  B: REL = 143

  B: MSC = 10

  I found this thread and it helped: cannot use the mouse in the Ubuntu VM

  However, the solution for me was the opposite. I needed to activate "Auto-detect of mouse for games.

• Cannot run VMWare Fusion on Mac 10.9.4 6.4

  I use Fusion for some time on my Mac (Mavericks 10.9.4). Recently, when I went to launch Fusion 6.4, I received this message:

  Cannot run VMWare Fusion

  VMware Fusion is damaged and cannot be repaired. Please move the VMWare Fusion application to the trash and reinstall VMWare Fusion

  So, I removed the merger application and downloaded again. When I installed it, I got the same message. Well, I thought that this must be one of these 'hidden' files, see you must be corrupt, so I used App Zapper to get rid of the merger and all files related; emptied the Recycle Bin, so merger was gone, gone, gone. Uploaded a new image, the same thing!  No matter what I do, I can't use Fusion. Suggestions?

  Do not use Zapper App - merger, running specific uninstall scripts.

  I've seen that occur when get-Gatekeeper confused about how something has been installed, when permissions are confused, or when a hard drive is running out.  If you have VMWare Fusion and have installed and it run under an administrator account (default in OS x unless you change it), then first use disk utility to first 'check disk' (if you want something better, look for smart voltains software utility), then repair permissions.  If this does not work, try to right click on the merger in the applications folder, and choose open.

• I need to change the background image often when running

  any body help me,.

  I need to change the background image often when running

  concerning

  welcan

  Hello

  You can also use effects rather than a timer, much more enjoyable... following example moves between a series of embedded images.

  David.

  http://gumbo.flashhub.NET/menu/ source included

• Select the first value in the list of values when running in poplist

  Hello
  IM using forms 6i. I filled the poplist by request. But what I need, I want to choose the first value in the list of values when running...
  
  That is to say, during execution, the poplist should have chosen its first value in the list of values.
  
  What to do...
  
  Concerning
  Sery

  WHEN CREATING a RECORD of the block of the list item or after the filling of the list item, you can write

  : my_list_item: = GET_GROUP_CHAR_CELL ('my_list_item', 1); / * If the data type of the item in your list is character.*.

  Here, instead of 1, you can give any clue... 1: value to the first list item position

• The mouse loses the Bluetooth connection when left idle

  I'm suddenly having a problem where the bluetooth mouse that works off the preinstalled Toshiba bluetooth stack.
  loses the connection when left idle for a little while.

  This was not the case before.

  What could cause this?
  I just changed the batteries in the mouse, so it's not the question.
  Any ideas?

  It is the forum on Toshiba laptops.
  If you have a laptop from another manufacturer, then you should visit the website of the manufacturer of your laptop

  In any case, the stack of BT from Toshiba page is the most recent which is available on the market, so it should work on your laptop.

• Windows 7 Ult running VMWare Fusion on an iMac - will not open the Medal of Honor-Allied Assault

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  In order to be able to run PC games on my iMac using Fusion-VM, I was obliged to purchase Windows 7 like Windows 7 on my PC was an upgrade. Despite the fact that the Ministry of HEALTH ran under Fusion using Windows XP, which is entered on my PC, now when I try to run MOH I'm greeted by a message indicating that Windows has encountered a problem (not identified), but will seek a solution. It was more than four weeks ago but still no word from Microsoft. Oh yes, Age of Empires is running, you don't know.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What is the exact error message when you try to open Medal of Honor?

  Medal of Honor-Allied Assault is compactable with Windows 7. The issue seems to be the installation of the program. I suggest you to reinstall the game Medal of Honor on your system and check if you face the same problem.

  You can check the link below to uninstall the program under Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  To install a program see the link provided below.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  You can also post your question on the link below.

  http://Forum.EA.com/eaforum/categories/show/190.page

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Running VMWare Fusion 5.0.1 Thunderbolt Drive

  Hi all

  I am currently evaluating VMWare Fusion 5.0.1 and I my VM in my love at first sight drive (Seagate Goflex Portable).

  The guest is Windows 7 x 64

  -Allocated memory: 8 GB

  -Processor allowed: 4 cores

  The host is MAC OSX 10.7.5

  -Processor: Intel Core i7 2.2 GHz

  -Total memory: 16GB

  I use the backup process within this comments and after a few hours of operation, VMWare Fusion does still not and crash and there is nothing I can do.

  I tried logout / stop / restart my mac through normal way (click on the Apple icon and select the menu) without success. and the only way to restart my mac is press the power for a few seconds (hard reset)

  If I move/copy VM file in my internal drive, this problem does not occur

  All the world experience similar question, run the virtual machine of the Thunderbolt drive?

  Also, if you need log file, please let me know that you need and I will he pass here

  PPS: I am to evaluate the software, I can not lift with VMWare support ticket

  Cool, let me know how it goes.

  I have too was doing some research on the same yesterday. I was focused on the memory management on the side of mac, rather than with the parameters of fusion.

  There is this command "purge" which converts all inactive memory in memory without having to restart the mac. More free memory means any chance of merger to the detriment of.

  Depending on the setting of fusion you found, I knew that the neutralization of him would make a difference. Because by default an automatic unbufferred mode for vista and later guest operating system which is what is needed for the best peformance.  That's why I was excluded from that.

• Kernel panic reproducible when using VMWare Fusion and Cisco VPN

  I can reliable reproduce a kernel panic when I use VMWare Fusion and Cisco VPN set.

  Using either done alone causes no problem.

  I'm on a mac book pro using the latest updates from Apple for Leopard.

  My question is: How can I report this to VMWare without having to pay for support?

  When I go to the VMWare fusion support page he wants me to pay for an incident.

  I really do not want to pay them to help solve a kernel panic.  (They pay me .)

  Announcing the details here (don't forget to join the panic.log as in HOWTO: ask (and answer) Questions) will work.

• The mouse cursor disappears when iTunes movie go full screen

  This isn't a question... actually I found a hack solution to this bug and I wanted to share it with other people having the same problem.

  Since the upgrade of the OS X El Capitan, I'm having a problem with my cursor disappears randomly. It is very repetitive if I start a video in iTunes with the enlarged screen and the cursor disappears. Indeed, after entering mode full-screen, iTunes mask the cursor of the mouse that is predictable. The problem is that iTunes may not reappear there again once, for example, when I go to another office for a temporary job.

  Move the mouse does nothing, escaping mode full screen does not come back. It is very annoying. Like I had never had such a frustrating experience prior to a new installation of El Capitan 10.11.3 and update iTunes to 12.3.3, I thought that this is due to the update to iTunes. So, I made another new facility of El Capitan, this time without updating iTunes. But the problem still exists. It is interesting that I had this problem on my MacBook Pro 17 "end 2011 and not with my iMac 21.5" mid-2009!

  After a little research, I found that this bug is not because of El Capitan, and happened randomly in the other years dating back to Tiger and maybe before.

  Only new change I had made in my MBP Preferences system , was in the part of accessibility, and it was related to Zoom. I had always used this feature, but I put the Zoom Style 'full-screen'. This time (after the new installation of El Capitan), I had changed to 'Picture-in-Picture'.

  I changed the Style of zoom "full screen" even once, and the problem resolved.

  If this does not work for you, can be debilitating, other options, such as 'Use keyboard shortcuts to zoom' or 'Use of scrolling with keys of change to zoom movements,' can solve the problem.

  We all know that it is a bug, and he has been there for a long time. I found that many people had reported it to Apple, but the problem persists.

  For those of you who want to use the zoom "Picture-in-Picture" style, or set the zoom style full screen does not solve the problem of their mouse disappears, I will mention a few ways to recover the mouse cursor. The following solutions are applied to a mouse cursor disappeared after entering the movie to iTunes (or any other application) full screen.

  1. Move the mouse until the switching Office brings back the cursor. Now, you can switch the desktop computer and do whatever you want. (It's easier work, at least for me).
  2. Use Alt - Tab to switch to another program; This will bring the mouse cursor.
  3. Press Ctrl + F2 to activate the Apple menu. (You can also move your cursor away to top left and click to activate the menu.)
  4. Press Ctrl + up arrow (or swipe up with 4 fingers on the touchpad) to activate the control of the Mission.

  You can also find other ways to retrieve the cursor of your mouse.

  Hope this can help you with the mouse pointer disappears.

  In MBP El Capitan the pointer of the mouse is where you assign to ' picture in picture ' or 'full screen '.

  If you miss your mouse pointer, accessibility-> display "Shake mouse to locate" check to find your mouse pointer. It should be there.

  Note: you have posted in the discussion of the Mavericks, should have used the ElCapitan discussion...

• The mouse pointer disappears when you type.

  When I'm composing an email, the cursor becomes empty on the page, but not on the rest of the screen.

  you have a parameter the value "hide the pointer when typing"

  to restore it, click Start, click Control Panel, click the mouse, click the pointer options, uncheck the "Hide pointer while typing" and click OK.

  teengeek.freehostingcloud.com

• Upgrade to Windows 10 8.1 windows on VM (running VMWare Fusion 7.1.2) - only 3 available screen resolutions

  I'm under VMWare Fusion worm 7.1.2 and I just upgraded my Windows to Windows 10 8.1 and now all my icons are HUGE and my choice of screen resolution is limited.

  I made sure that the 3D is disabled on the display settings of the merger (which allowed me to upgrade from Windows 8.1). I have a MacBook Pro retina 15 "2013.

  

  This is how the icons look

  

  In addition, activate the Retina display option did not help matters.

  I had the same problem. I reinstalled the VMWare tools and selected repair. He fixed the reboot.

• Can I migrate existing Win7 Pro VM since the VCenter for MAC OSx 10 using the Migration Assistant from PC and VMWare Fusion 4.0 and

  I have a P2V to ESX virtual Center successful and is not passed to my MACBook Air with Lion 10 and using VMWARE Fusion 4.0?

  I keep getting errors of failure while trying to use the PC Migration Assistant within the virtual machine and the MAC is using the Migration Wizard in the Fusion 4.0 and MAC begins the process, it keeps saying that it is impossible to write the file to the folder I chose on the local Documents of the MAC hard drive.

  Please inform, all the firewall settings are disabled on both sides, and file sharing is enabled on the MAC, including Windows SMB for the profile folder / I am tempted to write to...

  Simply copy the vmx and vmdk of this virtual machine via scp or any equivalent to the mac

  you don't need the Migration Wizard

• Pavilion 550-153NA: allow me to interact with the mouse and keyboard when Windows 7 starts at startup

  Hello

  I am trying to downgrade from Windows 10 in Windows 7. I tried to install Windows 7 but it keeps telling me that "Windows Setup experienced an unexpected error. To install windows, restart the installation. "I rebooted several times, but I still have the error. Then, I tried to install it by starting the drive at startup. All charge very well and the configuration screen appears. But I went to move the mouse, but it should not move. I tried several different mice and keyboards, but there was no hope, both USB 3.0 and 2.0. I did some research and found that you have to enable 'Legacy Support' in the BIOS. I did this, but there was still no movement.

  If someone could apply their knowledge via a comment, it would be very appreciated that I constantly tried since end of December 2015!

  Thank you very much

  I would try this new link.

  __Windows Setup has encountered an unexpected error. to install the reboot, the installation error code 0x0

  Let me know if it works

• To hide the popup Lov dialog when running

  Hello

  I use ADF 12 c. My requirement is to hide the popup dialogue Lov when I click on the magnifying glass icon in the component InputListOfValues. I wrote the following in the LaunchPopupListener of the InputListOfValues component property. Always I get the popup Lov dialog, please guide me to solve this scenario.

  public void lov1Launch (LaunchPopupEvent launchPopupEvent) {}

  {if (launchPopupEvent.isLaunchPopup ())}

  launchPopupEvent.setLaunchPopup (false);

  launchPopupEvent.queue ();

  }

  }

  Mustapha

  Well, it does work if you click on the lov icon (it probably should, but it doesn't).

  Check with the help of the values in the list of components - 11 g Release 2 (11.1.2.2.0)

  "If you want to add the AutoComplete feature when the user moves after entering a partial entry, you will need to disable the custom context menu. In your LaunchPopupListener() code, add launchPopupEvent.setLaunchPopup(false) to prevent the custom context menu when the user is moving on. By clicking on the link search will launch always research and the Select dialog box.

  Dario