Selection screen of Windows fonts

Similar Questions

• Windows 7 - after selecting a USER, the computer opens the selection screen of the USER - code throws again: 2000-0146 to diagnosis

  Computer seems to boot correctly.  Once a USER is selected in the USER SELECTION screen, the computer seems to proceed... but then the USER SELECTION screen opens again.  When you run the Diagnostic tests, the only error is 2000-0146

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you have a problem on your Windows 7 computer. I would certainly help with this question.

  This problem started after the recent update installation of Windows?

  Some members of our community have reported similar problems after the recent update of Windows KB3097877 installation on

  their Windows 7-based computer. The update has been re-released, uninstall and reinstall the update can help us get this problem is resolved.

  In order to solve the problem, I suggest you try the steps posted by Akil P responded on November 13, 2015 in the following thread and check if the steps help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/flickering-screen-and-sign-in-problems-on-Windows/df9c8255-587f-4DBF-BB45-6639b29dc4ae?TM=1447375680761

  Hope this information is useful. Let us know if you need additional assistance, we will be happy to help you. ___

  _____________________

  Thank you best regards &,.

  Isha Soni

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Black screen of Windows RESUME Loader

  I use Windows Vista on a laptop Everex NC1510.  When I try to start it I get a black screen titled "Windows resume Loader.  When I said "Continued with the summary of the system" and press the Enter key to select this option, nothing happens.  The computer continues to be stuck on this screen.  I bought a new computer, but it's out of warranty.  I have misplaced the Windows restore disc (in fact I don't ever remember have one).  Any help would be greatly appreciated.  Thank you!

  Here is the info on the recovery media, as you say that you do not have a Vista disc.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• How to disable the Welcome screen in windows 7 Home premium

  original title: disabling the welcome in Windows7 home premium screen.

  How to disable the Welcome screen in windows 7 Home premium. Therefore, type the user name and password when connecting

  Hello

  1. If you have Windows 7 Professional or ultimate edition, open the Group Policy Editor and navigate to the following policy.

  Computer Configuration / Windows Settings / Security Settings / Local political / Security Options.

  In the right pane, double-click the policy:

  Interactive logon: do not display last user name - change to "Enabled".

  2. If you have the Home Premium version, you can set this policy using the registry.

  * Make sure that you back up the key before making changes

  Open Regedit and navigate to the following location.

  HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\

  In the right pane, locate the dontdisplaylastusername value. Double-click this value and change the value to 1 data. Click OK.

  If this value is not present, right-click and select new/DWORD (32-bit) Value.

  Name the dontdisplaylastusername (respect for case-sensitive) value, and then make the above change.

  Here is a screenshot of the login window.

  http://i196.Photobucket.com/albums/aa86/rvmv/ManualLogOn.jpg

  Let us know the results.

  Concerning

• Explore Windows 7 64 bit slow loading screen and windows welcome does not

  Hello guys :D

  I had this problem yesterday and look really weird because I use several method to solve for 'Blocking with the Welcome screen' or 'Windows Explorer is not responding. So here's the problem:
  As I said, I had the windows with the "Welcome" screen stucks But some time later, about 15 minutes that it full load. Well, THIS IS more BIG PROBLEM: my office was black with my cursor! About 10 minutes, this return to normal, BUT the icons are not loaded. And when I click on any folder or right click of mouse, WINDOWS EXPLORER IS NOT the ANSWER (error status code c0000185 InPageCoFire) and need to restart. I restart and once again, does not. My laptop is now like that, turn on, wait 15 minutes and watch "Windows Explorer is not responding" and turns off.
  It makes me really mad. So I really appreciate for your help. Sorry if this question was asked before

  Uh, seems to be still the gel, you can try another way! Enter again the Advanced Boot Options, then choose 'Safe Mode'. Your loading windows basic drivers and services that could help you get into the windows desktop without encountering any problems. Once you're in safe mode, tap Start menu and search for "cmd". Right-click on 'cmd' and select them "run as Administrator". When the command prompt appears, check your disk file system error hard by typing "chkdsk c: /f" (do not type the quotation marks) if "c:" is a drive letter on your Windows 7. Restart your computer, and it checks file system of the disk for errors. When the analysis was finished and reboot, re-enter the Advanced Boot Options, choose "Safe Mode" again. And then open command prompt with administrator, and then type this command "sfc/scannow" (do not type the quotation marks). SFC (System File Checker) can check your file system were healthy or not. Wait until after the analysis. Then, restart your computer. If these tips don't help, update your status question. :)

  

• Distorted screen of Windows 7 remote desktop printing

  In our work environment, we are running Win7 Pro on workstations with monitors 24 ", and we are mode connection full screen on Windows 2003 Terminal Server that has a monitor standard aspect ratio of 4:1.  We use specific software in the industry for our company, and when we print, the text is elongated.  If the screen resolution for the Terminal Server Session on the client is configured for 1024 x 768 instead of 1900 x 1200, it prints very well as shown here:

  

  Unfortunately, the way things are presented to the user on the screen at 1024 x 768 is not satisfactory.

  We have a few (all 1900 x 1200 widescreen) customers who use software in the industry outside the Terminal Server environment, and they print without problem.  This leads me to believe that there is a specific problem in Win7 remote desktop client, or the Terminal Server itself.  Whatever it is, the display resolution selected for the Terminal Session is clearly the culprit.  In software, the print is first presented in a preview before printing, and the lengthening of the police is visible in the preview screen. I think that the software is written in C++, but I'm not 100% sure on that.  I'm guessing this has something to do with the print job will be returned on a big screen, but I'm not advanced enough to find out how or why that matters in the grand scheme of things.

  I have installed the patch in KB2768741 to Win7 clients, but he did nothing to help the issue.

  Ideas?

  Hello Jay,

  According to the information provided, I see that you are working on a domain network environment. If Yes, then I would advice, you follow the link mentioned below to validate your request in the TechNet forums because they have more expertise on these issues.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

  Thank you

• Could not get the user at startup profile selection screen

  Default title: original Desktop

  We use Windows 7 Home premium and we have 3 user profiles (excluding the guest profile that is locked): me, my wife and my daughter. If the computer is off, when I start, need me directly on my desk without invites me to select a user profile or by entering a password. How can I take me to the profile selection screen after starting upwards rather than default to my desktop computer?
  Thank you

  Someone set up your computer so that it goes straight to the office. Here's how you can cancel this:

  1. press Windows + R key on your keyboard.

  2. Enter the following command and press ENTER:

     netplwiz

  3. check the box that requires users to enter a password.

  4. click on OK.

  5. make a note of this for future reference method.

• Earth 2160 loses control of the mouse and the keyboard at the player selection screen, help

  I bought Earth 2160 gog.com installation and download went well. However, when I try to play the game it crashes at the player selection screen. Followed by loss of control keyboard and mouse, audio and video continues however (if you have played the game you'll know what I mean). Now Ive downloaded June DirectX run time package, re-downloaded the game download the latest DirectX web installer, thus, run as admin and tried a solve compatibility issues. None of them seem to work. If someone knows how to fix this please tell me.

  Hello

  1 did you changes to the computer?

  2. this question involved playing the game?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I would also update you mouse drivers and the keyboard of the computer manufacturing and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/is-is/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest you to contact game support and check out.

  http://www.Gog.com/en/support/earth_2160

• I just got a message at the bottom right of my screen saying Windows 7 Build 7601 this copy of windows is not genuine, BUT IT IS

  I just got a message at the bottom right of my screen saying Windows 7 Build 7601 this copy of windows is not genuine, BUT IT IS.

  I recently got a HDD replacement because there was a problem with my other HDD that was 1 month ago.
  now, I have this message at the bottom right and I don't have a copy of counterfeit Windows.
  can someone help me solve this problem?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• After using a third party partition manager program left to extend my Windows 8 partition, the system of Windows 8 start to a black screen and Windows 8 partition of the drive letter has changed

  Original title: problems of Windows 8

  I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.

  Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.

  I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.

  Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).

  Can someone help me with this please? Any help would be appreciated.

  Hello

  I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.

  Try to run auto repair from the Windows recovery environment and check if that helps.

  Method 1: start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) click Auto repair of Advanced Options screen.

  (g) following, choose the operating system by clicking on its button.

  (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.

  
  Method 2: Run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting from the Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
  
  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.

  Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.

  Write to us if you're still having problems. We will help you.

  Kind regards

• I accidentally deleted my "Desktop" tile on my screen of Windows 8 start... How to bring back the tile "Office"?

  Original title: tile from office.

  Hello

  I accidentally deleted my "Desktop" tile on my screen of Windows 8 start... How to bring back the tile "Office"?

  On the start page, type desktop to search for. When it comes to the top, right-click on it and select PIN to start.

• In "Général" it allows me to select ' show my windows and tabs from last time '.

  In "General", "Startup", "when Firefox starts:" it does not select ' show my windows and tabs from last time. " It allows you to 'Show my home page' and 'white page '. If it is not resolved, I'm going to change browsers.

  Hello Mozilla12,

  It's sad to hear that you are facing this problem. We would love to hear form you that how long you are facing this problem and what time you have updated your browser.
  Please reply so that we can help you in the best possible way.

  Kind regards
  Gerard sharma.

• Why new messages are not "BOLD"? SOLVED, caused by the creation of Windows fonts which had not separated "BOLD" and not "BOLD" entered

  bold text I just installed Thunderbird 24.6 on a new system running under Windows 7 64-bit. I can read and send messages, but in the component main, new messages are not "BOLD", and e-mail accounts that have new messages are not fat, either. On another Windows 7 x 64 system I don't have this problem. The add-on installed only is lightning on the new system and I started Thunderbird in safe mode, but that has not solved the problem. There is still the/unread column and it correctly displays a pip by unread emails, but I want the effect "BOLD" to return. How can I fix this?

  Problem solved. I was playing with the Windows font setting and chose a policy that did not separate entries "BOLD" and not "BOLD" (Segoe UI Semibold)

• When I right click on the image to select the Image view the Do option auto cannot be selected in the window pop up, it's gray, pls help

  It is in this site http://pics.data.bg/zoom/albums/8f13e1013d12c622ea6b3962684c9828

  on the image - right click > View Image > popup window > open with, the Do this automatically check box cannot be checked

  Viewer - Infran View - I do select outdoor with > window navigation every time, this should be done automatically, but the box is grayed out

  is there a solution?

  Thank you

  • Open in browser: https://addons.mozilla.org/firefox/addon/open-in-browser/