Selection tool has stopped working

Similar Questions

• Lasso selection tool has stopped working?

  The PSE9 lasso Selection tool is defective. When I draw a selection, I immediately get a message saying: "WARNING: WARNING: no pixel is selected to more than 50 percent." The edges of the selection will be visible. »

  It's the kind of message that I'd normally get when I select bad figures for feathering. But now the message happens when I use the lasso tool to select an area. When I hit Cancel the message, the selection disappears. But the drop shows that I can "unselect". When I do it and start all over again, I get the same problem.

  I quit and restarted PSE9 to try to solve this problem, but it did not work. Then I restarted my computer Mac, but it does not solve it

  .

  Have you tried to reset the preferences?

• my selection talking has stopped working with text messaging

  my selection talking has stopped working with text messaging

  Hi, plumberboy58.

  Please visit Apple support communities.

  I understand that you have a problem with the selection of talk.  Let's start by making sure that talk of selection is always enabled in settings > general > accessibility > speech.

  Talk about selection

  If talk about selection doesn't always show when you select a text message, forces all applications to close and restart your iPhone.

  Force an app to close the iOS

  See you soon

• Edit tools: pointing out the tool has stopped working, how to fix this?

  
  My highlight tool worked this morning, but after clicking on a box that says do not yet show that my highlighting tool has stopped working. How can I fix it?

  Rahul,

  After posting my question, I found how to solve my problem. I just reset the warnings edition.

  Thank you

  Kelsey

• Illustrator CS6 (license perpetual cloud no) / 10 - selection tool Windows stopped working just

  It won't select all when I run my mouse on my Board of art or the selections will not be selected. I rebooted to eruption the old prefs, reinstalled, tinkered in the menu under Edit preferably...  I must have something wrong set somewhere, but the only place I know that I have "do not keep selected" checked in the menu of pencil. ???

  MK,

  You can try to reinstall using the way complete three steps (the otherwise strange things may persist):

  (1) uninstall (check the box to delete the preferences),

  (2) run the cleanup tool, see the link below,

  (3) reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• Photoshop CS6 space shortcut for the hand tool has stopped working. How to operate?

  I just bought a new IMac and download my new photoshop cs6 finshed. I noticed that my space is no longer made scroll / pans more. A bit annoying, that how I can do my job. How can I fix the problem?

  First idea would be to try to restart your Mac.

• "generator resource tool cache stopped working.

  Usually about 5-10 min after I start my computer, I get the following error "resource cache builder tool has stopped working". I am running vista home prem 64. I did a google search but can't find any information on this subject.

  mmchaney,
  Please take measures that Chris has provided to perform a clean boot, I will outline these for you in the following:
  Clean boot
  Test in an environment of clean boot to see if this problem is related to the interference of other programs / services:

  1. Click Start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. On the general tab, click Selective startup.
  3. Under Selective startup, clear the check box load startup items.
  4. Click the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. Click OK.
  6. When you are prompted, click on restart.
  7. Log on to your account.

  ---------------------------------------------------
  If the problem does not reappear when your computer is in clean boot mode, a background program probably causes interference. You can try to determine which background program is causing the problem when the computer is in clean boot mode.
  ---------------------------------------------------
  To find the process or program to cause follow the beginning steps to enable half of the points of service, in the following article:
  How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use
  http://support.Microsoft.com/kb/331796
  ---------------------------------------------------
  To restore your Normal startup:

  1. Click Start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
  2. On the general tab, click Normal startup.
  3. When you are prompted, click on restart.

  ---------------------------------------------------
  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hardware diagnostic tools error pcdrsinfosystemboard.p5x has stopped working

  pcdrsinfosystemboard.p5x has stopped working message each time I have start hardware diagnostic tools in vista Home premium on hp Pavilion slimline s3700y pc

  My hardware diagnostic tools came pre-installed on my pc when I bought it. I didn't uninstall with revo uninstaller to get rid of all the remains and re-installed using the Recovery Manager. It has been fine since. I hope this helps someone in the future, which could run into this same problem. Thank you for asking. I always wanted to help out where I can in the field of computers, I get so much help from others.

• I get a message saying that lightroom has stopped working when I select preferences

  I get a message saying that lightroom has stopped working when I select preferences

  Hello

  Follow this help document and manually turn off the graphics driver.

  Adobe Photoshop Lightroom Help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  Thank you

• Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

  Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

• VMware Tools Core Service has stopped working

  Until I installed Mavericks one a few days ago, my MacBook Pro OS x 10.6.8 and was very happy merger 3.x.x running with a guest of Windows 7 Professional.

  After installation of Mavericks, I downloaded and installed the 6.01 merger. He "upgraded" my existing comments.

  Since then, he threw several times the error message "VMware Tools Core Service has stopped working".

  I uninstalled and reinstalled several times VMware tools. I ticked the box "prevent the NAP app." I have restored the old guest VM from a backup and it opens again.

  I can restart the service (using Windows 7 services Manager), but it runs for awhile then throws the same error.

  I've included dumpsters of screen of the info box - he appoints MSVCR90.dll as module faults. Out of curiosity, I looked at the control panel / uninstall programs screen and saw that that day, I installed Fusion 6.01, an instance of the 2008 C++ Runtime Redistributable x 64 has been installed (there are several other flavors of the VC ++ redistributable installed too: 2005/2008/2010, some x 86 and some x 64.)

  Thank you for any advice on how I can solve this problem.

  
  

  Duncan

  
  

  

  

  

  Try this one, bar menu of Fusion--> virtual machine > settings > default applications uncheck just the first option 'open files your Mac and links using Windows web applications '.

  Then restart the virtual machine, I got rid of vmware tools crashing this way! This was suggested by the vmware technical support team.

• My selection of program has stopped working.

  * Original title: Dropbox

  My program.dropbox has stopped working. I reinstalled both my Mac and my Windows machine, but it has just stopped working. I hope someone here has an idea because for me, it is an essential utility I move documents and records even back using dropbox but not more because just now, I have to just sit in my case dropbox does not move to their destination documents and I don't understand of course I understand what is happening here stop no longer works at all I have to sit documents

  You need to post in the forums of Dropbox or ask their staff to support about problems with their software.

• Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

  I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

  "GPCore COM object has stopped working and was closed".

  
  

  This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

  Hello MikeF48,

  Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

  I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

  Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer
  
  If the software has been downloaded and extracted to your system:
  1. type % temp % in the field of race
  2. Locate and open the folder starting with 7z (example: 7zS2356)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://get.Adobe.com/flashplayer/
  9 download drivers and full software features
  Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
  10. run the download to reinstall the printer

  After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

• Satellite A305-S6825: WLan has stopped working

  I'm in the United States. (I posted this message earlier)

  #1-I just bought Toshiba notebook a month or two ago with Vista Premium SP1.
  A day ago when I turned on the laptop, I got a notice to the effect:

  Windows Wireless Lan 802.11 Extensibility infrastructure has stopped working.

  -> Are looking for a solution later (recommended) the next time that you start the system
  -> Closed

  Those who were only two choices. I think I clicked on the first "search for a solution later.
  When I turned on laptop today, I got the same message.

  Anyone know what could be wrong with this new laptop?
  I use the wireless to enter IE7 and type your message.

  My husband and I are elderly and not too familiar with computers or computer language so if anyone has an answer, please make it simple enough for us to understand.

  We hope that this new laptop is not already broken.
  We cannot afford to buy another computer or have it repaired.

  #2-we tried to send questions by e-mail to MS, but they asked the PID. We looked in Control Panel and system (I think) and typed in the PID of there (OEM number), but it would not recognize MS.

  Can someone please help?
  Thank you very much.
  Alice

  PS: We have the DSL cable attached to our desktop (modem/router) and use this Toshiba laptop with modem/router of this office to get online (don't know if that is the correct terminology that someone else connected DSL, etc.).

  Hello Bob

  I agree with Kody and I think also there is a software problem or the WIFI network is not properly enabled. I use the European model of laptop, but I don't think that there is some difference of laptop models to the United States.

  If you want to use the WLAN, it must be enabled correctly. At first make sure that the WLAN switch is placed in position ON. The WLAN led should be on. After doing this using FN + F8 key combination to activate the wireless network card. When you press the FN key and keep down. Maps flash in high must be indicated. Always keep the button FN, but press F8 and select Wi - Fi ON.

  So now the wireless network card must be activated, and you should also be able to connect to your WLAN.
  If the problem persists, you can try to roll back the OS to an earlier time (when the network WIFI works well). To do this, you must start System Restore tool. Choose different restore point and to the next day when you think about the WIFI worked well.

  Sorry, but for now I have a better idea because I don't want to confuse you more than necessary.

  Have a good day and I hope that WIFI works well again.

• "game has stopped working".

  I can't understand it. I've updated windows vista 32 bit. I've updated my card graphics and directx 9 drivers. I also tried to reinstall and I downloaded from different places and got the same thing. I also tried to disable DEP and run the game as administrator. I'm now ideas so any help would be great.

  So basically when I run the game that instantly breaks down and a window pops up that says "game has stopped working" "windows can check online for a solution...". "and you can click on check online or close the program. There is also an arrow down for more details, click that and it says this:
  Description:
  Stopped working

  Signature of the problem:
  Problem event name: APPCRASH
  Application Name: ProjectTorque.bin
  Application version: 1.0.0.0
  Application timestamp: 4a8984bc
  Fault Module name: KERNEL32.dll
  Fault Module Version: 6.0.6000.16820
  Timestamp of Module error: 49952034
  Exception code: e0434f4d
  Exception offset: 0001b09e
  OS version: 6.0.6000.2.0.0.768.3
  Locale ID: 1033
  

  Hi C0123,

  Let us perform the following 4 methods and check if one of these help us resolve the issue.

  Method 1.
  I recommend you to run the Memory Diagnostic tool and check memory problems.
  See the following article for more information:
  Diagnosing memory problems on your computer
  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Method 2.
  If you think that any activity of virus that I highly recommend to run the Virus Scan.
  I recommend you to run online Virus Scan to remove any infections, as appropriate.
  Follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
  The following thread discusses the removal of viruses and malware online:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/ba80504b-61f1-4D71-960f-b561798b7b42

  Method 3.
  I would also recommend you to uninstall and reinstall the game and check.

  Method 4.
  We can also try to play the game in the State of clean boot and check if it works very well.
  Here are the steps to do:
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.