send a return without success/failure message value

Similar Questions

• Win 7-64 not start after change of motherboard. Win 7-64 has tried to repair without success. Message is

  Win 7-64 not start after change of motherboard.   Win 7-64 has tried to repair without success Message of Win7 installed "Cannot automatically repair the start" Message from the repair option DVD Win7-64 install is "this version of the Recovery Options is not compatible with this version of Windows".

  If Win 7-64 don't update the hardware changes and this prevents the start.

  Is there a solution for this problem of resettlement and thus destroy all previous program files and configurations?

  Hello

  As you mentioned that you have "hard disk 500 GB (previously there were two HD in the old mobo)" which means the HD is also changed

  Then I suggest to clean install to solve this problem, please follow the link to clean, install the windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  Note: data loss caveat:

  Converting a hard disk partition or volume from NTFS to FAT32 requires that you reformat the partition, which deletes all the data on this subject. Be sure to back up data that you want to keep before you begin.

  Thank you

  Er.Mayank Chadha

  Thanks for your response

  I solved this problem in BIOS Advanced\SATA config\SB SATA config.  as follows

  SATA port 1-4 = AHCI initially

  SATA port 1-4 = new IDE

  SATA port 5-6 = IDE these ports used with DVD, a comic book should be like ports 1-4

  This because I've done a typical mistake of mine.   I did not save the configuration with the entry of FDI

  Good bye

  Huemul

• I have problems sending e-mail with an e-mail that had attachments and is now in my Outbox is trying to send without success

  I need to know how to delete an e-mail message that contains attachments that I sent and it was sent to my Outbox and microsoft continues to try to send it without success.  There has been long attachments

  Using Outlook Express? Check: File | Work offline and in: reviews | Layout: uncheck the preview pane. Can delete you it now?

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• Recently went from Outlook Express to Windows Live Mail. Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  Recently went from Outlook Express to Windows Live Mail.  Since that time I can't send/receive emails without this message popup Windows live mail ID error 0x800ccc78 Server Error 530.

  You will need to ask here:

  Windows Live Mail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=15

  And you need to display an error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread. Just the number of code alone is not enough.

• Trying to COPY with HP Office Jet Pro 8600, returns without the message 'paper mismatch '.

  HP officejet PRO 8600 Plus.

  MAC OS 10.5.8

  Just installed the printer on Friday.  Has taken some time to work on the wireless, software updates, the record.  It prints and scans very well, but when you try to copy I get this message:

  "The detected paper does not match the chosen size or paper type. Make sure the size or paper type is correct continue the work. »

  I had to review all trouble shooting for several hours. Without success!

  Hi Skylacker,

  You did make sure to install the complete package of features? If not, you can download it here

• I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  I tried to install Windows Vista SP1 since July without success. I stopped trying in October but just tried it once more and I get the error code 8024200d message when it fails to install.

  See this previous thread on the problem: http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.technet.microsoft.com + 8024200d & ei = hkchS4O6M9HolAfh8viLCg & a = X & oi = forum_cluster & resnum = 1 & ct = more results, & ved = 0CA0QrQIwAA

  Unlimited installation and compatibility for Vista SP1 support is available free of charge from April 2008, through June 30, 2009.  This support now will cost $59 us $ (or more) per incident.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Connections without success since your last message of session?

  Hello

  For my previous client in the case of unsuccessful logon, oracle displays a message like below.

  Connections without success since your last session: 3

  Cause: Someone tried to connect to Oracle Applications using your username 3 times.

  Action: If you suspect that someone unauthorized attempts to connect as you guess your password, contact your system administrator for assistance. Change your password immediately.

  How to turn on this message for my current client, where it is not lit.

  Both my clients use R12.1.3.

  Thank you very much

  Susan

  View profile ' Sign-On: Notification "- user profiles and profile in Oracle Application Object Library Options

• I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Ligh.

  I've just updated to LR5.  I also have a new camera.  Nikon D800.  Try importing directly (from the camera) in LR.  But without success. Get the following message.  "The files are a camera which is not recognized by the raw format support in Lightroom."  How can I import it please?

  I find the program file for Lightroom 5 and make an icon of office for him. And I would get rid of Lightroom 3. If you open Lightroom 3 and you see images in the old catalog, not the updated one.

• "windows host process RUNDLL 32 has stopped working" I ran the cleaning disc etc. without success. Help, please!

  Internet explore and Incredimail has stopped working after power failure with the following error message "windows WHAT RUNDLL 32 host process has stopped working. I ran the cleaning disc etc. without success. Help, please!

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Unable to send the form without attachment if file upload fails

  Hi all
  
  I have a form, in which I have a component of the input file.
  
  Scenario 1 - if I do not attach and submit the form, it is successful.
  
  Scenario 2 - if I attach a file of size less than 2 MB and then submit, it is successful.
  
  Scenario 3 - if I attach a file of size greater than 2 MB and then submit, ADF gives an error message saying "the file is large" that is expected.
  
  3.1 - in scenario 3, after the failure of downloading files, I want to send the form without attaching any file. But the form is not filed and the warning message still appears.
  
  3.2 - if I have to re-download the files of size less than 2 MB and then submit, it is successful.
  
  Please help me to solve the issue.
  
  Thank you
  Henault.

  Try to clear the error messages

  
  function clearMessagesForComponent(evt){
  AdfPage.PAGE.clearAllMessages();
  evt.cancel();
  }
  
  

  Now all yo uneed to do is call this javascript method by using for example a

  a button or any other field.

  Timo

• When I opened a new tab "chrome://lightning/content/newtab.html" appears automatically. I tried in safe mode without success.

  When I opened a new tab "chrome://lightning/content/newtab.html" appears automatically. I tried in safe mode without success.

  Hello unparadomas, try this to reset the page to the new tab manually: enter Subject: config in the bar firefox address (confirm the message information where it appears) & get preference named browser.newtab.url - right click and restore the default value for that entry.

  You can also run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to make sure that this change was not caused by adware or that it is present in other parts of the system as well.

  Fix Firefox problems caused by malicious software

• How to detect the State of a LabVIEW test success/failure

  Which variable TestStand should I read to determine the State of a test of TestStand set success/failure?

  I use the parallel model and LabVIEW can see index of my process with the variable "RunState.TestSockets.MyIndex", but now the LabVIEW needs to know if this process was successful or failed the entire test.

  Possible, recommended to capture those (so do not use the "built-in controls visible TS') is to capture the UIMsg_EndExecution (which is generaated automatically if the engine ends an execution).

  This message to user interface, you can access its data, one being the property of Execution.ResultStatus and execution.

  See using TS for the possible values of ResultStatus. This allows to control indicators on your UI.

  hope this helps,

  Norbert

• < message > SOA returned no details. < / message >

  Hi all
  I'm working on the migration of the process BPEL of 10g and 11g. Currently, I am faced with the question in one of the processes BPEL calling for an ASYNCHRONOUS process. Here's the scenario.
  
  I have a BPEL (BPEL1, Async) process, call another BPEL (BPEL2, ASYNC) process. Inside the BPEL2, we have just an adapter DB call to the database and returning the result of BPEL1. The two processes are deployed on the same server/partition.
  
  Migration succeeded, without issue. But when I was testing, called BPEL2 BPEL1, BPEL2 went to the database and to obtain records successfully, but when he is sent to BPEL1, we are witnessing to "< message > SOA returned no details." "< / message >" in the "reception" of BPEL1 activity (who returned from BPEL2).
  
  I don't know what went wrong. Can anyone guide me on this please? Thank you.
  
  Hruthayah.

  After removing the webservice call from composite.xml, but also completely removed the .bpel code and recreate the service call yet once, resolved this problem.

• Captivate 5: Insert success, failure, and hint of legends

  Hi all

  I tried searching this forum as well as the help of Captivate and have no growth with an answer to what I'm sure is a very simple problem. I'm creating a quiz in Captivate and accidentally deleted my success, failure and legends of suspicion on every slide in the question. Is there a way to get back them on these slides without having to recreate each slide of the question? (I noticed that if I add a new question, new success, failure and hint captions appear in the default style, I designated.) However, for existing slides, I was unable to make the captions I insert act as success, failure, or hint of legends; Similarly I can copy/paste them to a new question slide where they appeared automatically.) Can anyone help?

  
  Thank you!
  Karyn

  If you select each slide of the issue and for the Quiz properties panel, you can check the boxes to get the Correct back and suggest captions (incomplete).  But there is no option to return to the legend of the failure.  You must go to the failure of the levels take place and make sure that it is set at least one.  You will probably find that it is currently set to zero because you deleted the legend of failure and supposed to Captivate that means that you do not want failure as an option.