< message > SOA returned no details. < / message >

Similar Questions

• Error message - no installed updates

  I am trying to install SP2 for my 64 bit system of Vista (already have SP1 installed), and it is not install.  I tried the manual download and it still does not work.  Then tried to download the system error message update tool for Windows Vista for x 64-based systems (KB947821), but then received:

  Some updates have not been installed: patch for Windows (KB947821)

  No idea how I can get downloaded SP2?

  Thank you!

  Hi JTG333,

  1. What is the error message that you receive during the installation of service pack 2 and system analysis tool?

  2. did you of recent changes on the computer?

  3. do you have security software installed on the computer?

  View the history of display for the details of the failure of the update and after return with details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  I suggest that you reset Windows update components and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Also, I would say that youtemporary disable the security software on the computer and try to install the service pack, check if it works.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.

• Should I return the JSON object or object java SOA?

  Hi gurus,

  A question that I hope makes sense - can SOA return a JSON object JAVA object, not XML?

  Thank you

  Anatoliy

  
  

  First "SOA" is not a thing, so it's difficult to give a Yes or no

  This is a technical product feature if it will be possible to expose data in xml/json/etc. formats

  When we look at the Oracle portfolio, we have a preview for example Oracle SOA Suite and Oracle Service Bus (other Oracle products can do the same thing).

  With these two products, you will be able to represent your data in other formats in addition to XML.

  some links to help you get started.

  https://blogs.Oracle.com/jeffdavies/entry/using_json_with_oracle_service

  http://Biemond.blogspot.nl/2010/05/HTTP-binding-in-SOA-Suite-11g-PS2.html

  http://javaoraclesoa.blogspot.nl/2012/12/receiving-JSON-requests-in-Oracle-BPEL.html

  Oracle Service Bus can also store Java objects in jms queues, so, like, that you can carry your data too.

  http://www.xenta.nl/Blog/2011/09/01/Oracle-service-bus-processing-Java-object-messages-with-JMS-transport/

  Hope it will be a little helpful

• Return TopCPU process variable rule data

  I try to customize the rule runaway_process and have some difficulty to retrieve the values of the data model. The goal is to have an email sent when this rule fires for some hostnames. The scope was pretty easy, but get the values of process variables to be included in the e-mail message is a challenge.

  The rule is defined in the TopCPU table and below that is Process_TopCPU. Can I return the latest value data there with:

  Server.get("DataService").retrieveLatestValue (Scope, "Process_TopCPU"). GetValue()

  However, this seems to return the rows in the table of 5 albums processes. I want to return the details (order, Pct_CPU) from the top of the page process only and looks like you have to go a little further below and pull data from Process_TopCPU_Entry. I do not understand how to return these individual values but... can anyone help with this?

  The difficulty here is that the Observations are so-called Observation complex (several processes CPU high of perception at any time)

  The following Scriptlet will work (assuming you reach on the host object.)

  It will search all ALBUMS of Cpu processes in the current collection that correspond to a specific filter criteria and create a string that contains name and uses CPU for each of them. I hope this will help you to build your own version for your use case.

  // Define the filter closure. you could do this inline but I like to declare this on it's own section for readabillitydef filter = { processEntry->  return processEntry.cpuUsage > 0.03}
  
  // use teh find Observation entries function which is part of the Foglight core functionallity and filter for Processes that use more then 2% CPU in my casedef entries = findObservationEntries(#topCPUProcesses from $scope.cpus#,filter)
  
  // Header def msg =  "Processes with high CPU Usage :\n"
  
  // create a single line for each process using a GString templatemsg += entries.collect{ "Name: $it.command  cpu: ${it.cpuUsage *100} %"}.join("\n")
  
  // return the message return msg  
  

  I've also attached a screenshot which describes the function used

  

• Details by e-mail to the people found in the select statement

  Hello
  
  I managed to send me an e-mail to test base for the first time.
  
  However, I now require a method to be found via a SQL select with their information only email people.
  
  for example, select statement returns the details below: -.
  
  NAME OF APPLICATION DETAILS
  Fred.Bloggs request2 details
  Fred.Bloggs request4 details
  Jim.Blair request3 details
  
  I should concatenate the field IE @company.com
  
  so
  
  [email protected] receiving an email
  "request2 details" completed
  "request4 details" completed
  
  and
  
  [email protected] receiving an email
  "Details of the request3" completed
  
  I need help for the loop enter the full e-mail address of each person, and then send them only their data.
  
  Thanks in advance for your help.
  
  Wire UPDATE with news (previously the report erroneously) select sql statement
  
  your Reported
  
  Published by: user11962502 on December 1st, 2009 01:56
  
  Published by: user11962502 on December 1st, 2009 02:02

  Hello
  I don't have easy access to an Oracle instance to check it works and get the syntax right right right now but my first reaction would be to use a combination of rpad() and width as the column to be constant. This can be a you hard-code (IE, if you know what type of query will always say less than 8 characters) or ideally, first select the maximum length of the table:

  SELECT MAX(LENGTH(request)) + 3  INTO l_max_length FROM my_table WHERE clauses;
  /*Added the three to give a bit of extra space - modify to suit your needs*/
  

  Then when you are out of the field, do something like:

  message:=message || rpad(i.request,l_max_length - LENGTH(i.request));
  

  This will ensure that everything is aligned. Of course, it only works if the email is sent in plain text and that the user is using a font to width fixed to read emails in plain text. Most people do, but do not count on it.
  As before, the other option is to use an HTML table, however HTML emails are not very nice - try to stick with the plaintext if possible! :)

• IOM 11 GR 2 PS2: 404 error trying to open the task detail taskflow

  Hi all

  recently, I upgraded 11.1.2.0.13 IOM (BP13 11 GR 2) version for 11.1.2.2.1 a (11 GR 2 PS2 BP1).

  In the old environment, I have developed a composite SOA custom for the approval of the application, and he had a custom task detail taskflow we use for email notification.

  After IOM upgrade, custom composite SOA and custom Office retail taskflow work together, but try opening the datails of the IOM task waiting for approval, I get a 404 error.

  This is the link that returns the error: http://oimserver.mydomain.com:14000/workflow/ADFTaskForm/faces/adf.task-flow?_id=remote-taskdetails-tf&_document=WEB-INF%2Foracle%2Fiam%2Fui%2Fsoa%2Ftfs%2Fremote-taskdetails-tf.xml&bpmWorklistTaskId=c0aab8e4-24c5-43b7-97ca-19a2653c533e&bpmWorklistContext=babc9fd0-71f8-4541-909b-19885a438f4a%3B%3B4eH4AN8Pod7viyO7euAPQvopko8Bl31DbWG6HLgDDWDMVpZEYKT%2Fo85ng%2BR9vEVJh6O8c%2Fq2nCBfMuENE9%2B3Sh6GlSAxzakuICcbsLE3lWqh6wtm%2Bibn1EK%2FwJdkCeB%2FiPsycYYHhoxqpqtPSAhsLRiwMPcivmgg07BnmSVljkxXDuHRLv%2B6LBG9rnPBq3kG6%2B8pIQWGrwh%2FpEtuPDfKAjRUgXfqNtXUU0dbAlH%2BAC3RgrR1%2BjxreS%2BHrmI7z1m7&bpmBrowserWindowStatus=taskFlowReturn&bpmWorklistHttpPort=8001&bpmWorklistHttpsPort=0&bpmWorklistHostName=iamappmi-col05.sky.local&taskDetailsUri=% 2Fworkflow%2FADFTaskForm%2Ffaces%2Fadf.task-flow%3F & taskDetailsTfId = ApprovalTask_TaskFlow & taskDetailsTfDoc=WEB-INF%2FApprovalTask_TaskFlow.xml

  If I try to open the task directly from SOA worklist application details, it works correctly.

  In this case the il is: http://oimserver.mydomain.com:8001/workflow/ADFTaskForm/faces/adf.task-flow?bpmWorklistTaskId=601d5291-98cb-4b38-a6bf-57438cf22fdb&bpmWorklistContext=566b64e6-6c34-4eed-ad3b-fe8b479d1a60%3B%3BOWD%2BTzwLBRiVzZsrfKLUBvO88MZReU0wq6zTihJIl6Ufk%2FHdgO8Ha3UvGTD6pwuhxctcoOBLBV0LCS%2Bp6Gbz0yfZjXelTBAWU8ArnzUzKjHi1AvVW3gFgbcJ2%2Fk8vUWS3XbqPIYvPXx0Rgl5OMHjvPsD0EzrjUOQ9PzzWXIwR4skRvUVEBxDpoe%2BJcyIFQUjkgp3%2ByWxsds%2FRoCQdqBln53atIdkvcgwEy5ujitMFzbIk%2FZiBRdqi9cw8wBzr%2FZ%2F&bpmWorklistHttpURL=http%3A%2F%2Fiamappmi-col05.sky.local%3A8001%2Fintegration%2Fworklistapp%2Ffaces&bpmWorklistHome=home.jspx&bpmWorklistReassign=reassignTask.jspx&bpmWorklistRoute=routeTask.jspx&bpmWorklistRequestInfo=requestInfo.jspx&bpmWorklistSecurity=signTask.jspx&tz= Europe % 2FSan_Marino & lg = en & cy = & vr = & dispNameLg = en & dispNameCy = & dispNameVr = & df = medium & dt = both & tf = short & sf = m & bpmWorklistSessionTimeoutInterval = 900 & bpmBrowserWindowStatus = taskFlowReturn & enableNavigationButton = true & adf.tfDoc=%2FWEB-INF%2FApprovalTask_TaskFlow.xml & adf.tfId = ApprovalTask_TaskFlow & _task-flow-return=http%3A%2F%2Fiamappmi-col05.sky.local%3A8001%2Fintegration%2Fworklistapp%2Ffaces%2Fadf.task-flow-return%3F_adf.ctrl-state%3Dyw6vh0nae_35 & _adf.winId = yw6vh0nae_26 & _afrLoop = 10168074383135939 & _afrWindowMode = 0 & _afrWindowId = null

  Someone has an idea to investigate and solve the problem?

  Thanks in advance,

  Daniele

  Hi all

  in the tab Administration ApprovalTask, change of parameter 'HTTP Port' at the port of IOM and "URI" to /identity/faces/adf.task-flow?_id=ApprovalTask_TaskFlow&_document=WEB-INF/ApprovalTask_TaskFlow.xml, I'm able to open pending the approval of the work detail page of IOM.

  Thank you all for the contributions.

  Kind regards

  Daniele

• Script to list the information under Configuration/Storage/datastore details

  Hello, I'm trying to create a script that returns the details data Configuration/Storage/Datastore/store info. The thing I want the script to do is list my ESX:s, data of list store names, list mpathpolicy and the details of the data store paths section in the VI client.

  Is it possible to get this in a script? Or if anyone knows how I can get information from the info of paths in Details of the data store to the VI client

  Thanks in advance

  This is possible if you use the SDK.

  The following script lists the name of host, name of DS, political path and the number of paths.

  If you need other information on the page of details in the report let me know.

  $report = @()
  
  Get-VMHost  | Get-View | %{
       $esx = $_
       $esx.Datastore | %{Get-View $_} | where {$_.SUmmary.Type -eq "VMFS"} | %{
                 $ds = $_
                 $ds.Info.Vmfs.Extent | %{
                      $ext = $_
                      $extKey = ($esx.Config.StorageDevice.ScsiLun | where {$_.CanonicalName -eq $ext.DiskName}).Key
                      $lun = $esx.Config.StorageDevice.MultipathInfo.Lun | where {$_.Lun -eq $extKey}
  
                      $row = "" | Select ESXname, DSname, "Path Selection","Paths Total"
                      $row.ESXname = $esx.Name
                      $row.DSname = $ds.Name
                      $row."Path Selection" = &{
                           switch($lun.Policy.Policy){
                                "VMW_PSP_FIXED"{"Fixed"}
                                "VMW_PSP_RR"{"Round Robin"}
                                "VMW_PSP_MRU"{"Most Recently Used"}
                           }
                      }
                      $row."Paths Total" = $lun.Path.Count
                      $report += $row
                 }
       }
  }
  $report
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Select details (query) by passing parameters in a calendar

  Hi all
  
  I have a scenario like below;
  
  I have a report and it returns 1000 details that is not necessary @ all.
  what I want to do is, place a calendar at the top of the report, and then select the range of dates (probably 2 Calenders)
  and query the data accordingly by clicking on a button or something.
  
  I know that I can do this using the default filter... but at first, I have to go select * from table; query for it. she returns unnecessary data.
  
  -the scenario in short-
  
  connection of the user to the page
  nothing comes up to enter the data range
  Once he choose the date range... after clicking on the button
  then returns data according to the date range...
  ---------------------------------------------------
  
  I think you my question.
  can someone give me a hand to solve this problem.
  It will be a great help...
  
  
  
  Thanks in advance
  Max
  
  
  ------------------------------

  Max,

  The tutorials, it should be very clear how and why my demo works.

  Again, if you need more help, reply to this thread or post a new and someone you'll go forward once more.

  Jeff

• the ipad to tiscali mail

  Hello

  I have a first generation IPAD on iOS 9.1 Air. My ISP is TalkTalk and my email address is @tiscali.co.uk.

  Recently, I tried to set up email on the IPAD. It was not easy. However, now I can receive emails, but I can't find any way to send them. The error message is "unable to send mail. The username or password 'my e-mail address' is incorrect".

  I checked and returned these details several times but it makes no difference. The username and password are the same for the incoming and outgoing mail server. The other details are:-

  Entrants

  Pop.tiscali.co.UK host name

  Outgoing

  Server main smtp.tiscali.co.uk

  SMTP.tiscali.co.UK host name

  Use SSL disabled

  Password of selected authentication option

  Server port 587

  I read that this issue has been raised in the past, but none of the solutions seem to work for me.

  It must surely be a problem now? Any idea?

  Thank you

  GK29

  Under the ougoing - primary server smtp. Tiscali.co.uk - click on it and enter your password

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer keeps restarting once I downloaded the updates?

  After you download windows /microsoft update my computer starts up on its own. No one knows who the updates is causing this problem and how can it be solved?

  Hi ShielmorTwomey,

  ·         Have updates you installed?

  ·         Do you have an error message when the computer restarts?

  Follow these methods.

  Method 1: Check the event viewer to find out the cause of the issue and after return with details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• my computer doesn't turn off the first time.

  my computer doesn't turn off the first time I try to turn it off. This will turn off the second time I select "turn the computer off.

  Hi Guillermo_932,
   
  -You receive an error message or error code while trying to turn off your computer for the first time?
  -Have you been able to shut down your computer without any problem before?
  -If so, remember you have changed your computer before this problem started to happen?
   
  Follow the steps in the article, and check if it helps in fixing the issue:
  Computer does not close properly if selective suspension is enabled
  If it does not, check the event viewer to see if there is no error message related to this issue.
   

  See the following articles for more information on the event viewer display:

  Using the event viewer

  Procedure to view and manage event logs in Event Viewer in Windows XP

  After return with details that are of event viewer to help us help you better.

• How can I uninstall or repair and I HID Non-User Input data filter?

  (He was installed by windows update & failed because the "fatal error", it continualy attempts to install start-up & fails.) There NOW in some SORT NOW picked UP MY wireless keyboard Microsoft THAT DO WORK MORE, AS THE PROGRAM CACHE IS DEFECTIVE!  When I stop & reboot, the KEYBOARD is NON-OPERATIONAL & I can't GET THE PIN TO LOGON! In desperation I dug an old logitech keyboard and eventually be able to log on to come here for HELP, someone please. Sorry for the cries of joy, (capitals), but I had a full head of hair when I started but I'm now almost bald!
  Brian McGDR

  Hi BrianMcGDR,

  1. When you are unable to install the Microsoft HID Non-User Input update data filter?

  2. What is the full error message you received during the installation of this update?

  3. do you have security software installed on the computer?

  4. What is the model number of the keyboard? What happens when you try to connect the keyboard to the computer?

  The update of the Microsoft HID Non-User Input data filter must be installed if you experience the problem that is mentioned in the Microsoft article below.

  The screen saver does not start after the installation of a wireless pointing device

  http://support.Microsoft.com/kb/913405

  I suggest that you download and install the latest drivers for keyboard, check if it helps.

  http://www.Microsoft.com/hardware/en-us/downloads

  See the update history for the exact error for failure put up-to-date and after return with details.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

• AOL restart my computer when I log off the coast. It started to happen after I downloaded 16 updates from Microsoft about 3 days ago.

  When I connect to AOL my Windows XP automatically restarts. The strange thing is that this isn't it every time, but most of the time.

  Hi bill1106,

  1. not the problem only occurs when signing off the coast of AOL?

  2. you receive an error message?

  3. when all the updates is correctly installed on the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to see the cause of the issue and after return with details.

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427