Send UDP traffic for bandwidth test

Similar Questions

• I send read receipts for my test email accounts, but I don't get all the answers, I have the global on setting

  What I would really like to do is use the mailing, send later and read receipts, I do not know if these extensions will work together or not. I fixed some things in the configuration editor and define global settings to "always send" but up to now I have not anything to come back at all. My test email addresses are to GMail and yahoo.

  Hey, we all get Moody... My turn. My pet hate is the double issues. Mainly because I don't really no notice of WHO. It's not relevant to me. So I find it actually to answer me the same thing for the same person. And not always the way to wsame that the two items contain a sufficient difference that what is right for one is not good for the other. Not a problem, then I must explain why I disagree with me basically the exception.

  Curiously, people tend to think of E-mail as a thing of delivery signed type when it is really formed free that the sender can never guarantee what happened to their mail, and still less that it was delivered.

  The RFC allow delivery status notifications. Most of the servers were turned off to control spam see http://en.wikipedia.org/wiki/Backscatter_%28email%29. Read even notification are controlled by the client of the recipient (except in the case of Enterprise Server). Thunderbird default is to ask if you want to send a. My experience is most people go how to turn off after they get the first request. The actual result is that they are subject useless as the only people who return them do not need to.

  Configuration of your test in Thunderbird addresses should get the query to return a read receipt, as it is a part of the header as such, e-mail client know he asked. If this isn't maybe there is a bug in the software.

• How can I have a graphical report for another test instead of only for the connection test

  Currently in our environment, we have enabled trends report function so that the connectivity for all test machines, we use the 4.3 BBFE and I noticed that in the CGI - BIN directory, we installed the bb - amcharts.sh and bb - doamcharts.sh of Quest software scripts. My problem is that I can't find any file configuration of this feature, and trying the Script BBserver troubleshooting I found no nothing related to this function.

  Can someone help me please?

  I hope to be clear enough.

  Best regards

  Community in the morning,

  I read the post from Paul O'Brien on the activation of trendig of performance data. At the present time, the solution seems to work only on my RHEL hosts, but for all our Solaris hosts, I don't see any performance data sent to my BBSERVER, expecially, the $BBVAR/perf/$HOSTNAME dir is empty and the newspaper of our BBSERVER and BBclient, I don't see any warning about, here's a bbdef - client.sh which does not , could someone help me solve this problem?

  P.S. the Server/client version is the PE bb4.3.

  bash-3. $00 cat bbc4.30-bbpe/etc/bbdef-client.sh

  #! / bin/sh

  #

  # bbdef.sh

  #

  # BIG BROTHER ZONE DEFINITIONS

  #

  # (c) Copyright Quest Software, Inc. 1997 - 2009 - all rights reserved.

  #

  #

  # LOCAL CUSTOMER CONTROL CONFIGURATION for bb - local.sh

  #

  # WARNING LEVELS AND PANIC TO LOCAL INFOMRAION SYSTEM

  # YOU CAN SET THE VALUES ON A SPECIFIC HELP FILE SYSTEM OF

  # THE etc/bb-dftab FILE

  #

  DFWARN = % DISK # 90 (YELLOW) TO WARN THE

  DFPANIC = % DISK # 95 (RED) TO PANIC

  export DFWARN DFPANIC

  #

  # CPU LEVELS ARE THE MINUTE LOAD AVERAGE x 100 5

  #

  CPUWARN = 150 # (YELLOW) WARN LOAD AVG OF 1.5

  CPUPANIC = # 300 (RED) PANIC TO LOAD AVERAGE OF 3

  DISPREALLOADAVG = "FALSE" # DISPLAY THE LOAD AVERAGE AS FOUND IN AVAILABILITY

  # BB REMOVES THE '.' DEFAULT

  export CPUPANIC CPUWARN DISPREALLOADAVG

  #

  # PROCESS MONITORING

  # THESE VALUES ARE SUBSTITUTED BY THE etc/bb-proctab FILE

  #

  PROCS = 'bbrun' # (YELLOW) WARN IF NOT RUNNING

  PAGEPROC = "cron" # (RED) PAGE IF NOT RUNNING

  export the PROCS PAGEPROC

  #

  MESSAGE # TRACE FILE (/ var/adm/messages or similar)

  #

  # SMM: WHAT'S NEW IN BB 1.4

  # CHKMSGLEN IS SET TO TRUE BY DEFAULT. HE'LL SCREAM IF IT FINDS

  # YEAR EMPTY MESSAGES FILE. BETTER SAFE THAN SORRY.

  #

  # NOTE: Since VERSION 1.8, YOU CAN USE etc/bb-msgstab to

  # CONFIGURE THE VALUES OF PAGEMSG, GSM AND IGNMSGS

  # NOTE THAT THE KEYWORDS ARE SEPARATED HERE SPACE OPPOSITES

  # À « ; » SEPERTATED IN etc/bb-msgstab

  #

  CHKMSGLEN = "TRUE" # MAKE SURE THE FILE MSG IS NON-NULLE LEN

  PAGEMSG = "NOTICE" # PAGE (RED) IF WE SEE THIS MESSAGE

  MSG = "$PAGEMSG" # (YELLOW) WARNINGS ON THE LOOKOUT FOR

  # NOTE: THE WORDS IN PAGEMSG * ALSO *.

  # DEFINE IN MSGS

  IGNMSGS = "" # list of messages to ignore if the string matches the line "

  # define each message

  MSGEXPIRE = "30:60" # EXPIRE WARNINGS IN 30 MIN, PANIC IN 60

  YELLOWMSGSLINES = 10 # return of the XX more recent warning messages

  REDMSGSLINES = # 20 return messages of most recent PANIC XX

  OLDSTYLEBBMSGS = 'FALSE' # don't expire messages found

  # just like the old days (they must be deleted manually)

  export MSGS PAGEMSG IGNMSGS CHKMSGLEN MSGEXPIRE YELLOWMSGSLINES REDMSGSLINES OLDSTYLEBBMSGS

  #

  # Control the color of the dot of cpu when a host reboots

  # Note that the minute definable maximum is 60, anything over will be reset to 60

  #

  WARNMINSONREBOOT = 60

  WARNCOLORONREBOOT = yellow

  export WARNMINSONREBOOT WARNCOLORONREBOOT

  #

  # THIS DEFINES A VALUE FOR IF YOU THINK THAT THE MACHINES MUST BE RESTARTED EVERY X DAYS

  #

  BBTOOMANYDAYSUP = 9999

  export BBTOOMANYDAYSUP

  #

  configuration variables # associated with performance data

  # define as below for processor and disk

  # BBPERFTESTS = 'cpu disk.

  #

  BBPERFTESTS = 'cpu disk.

  export BBPERFTESTS

  #

  # Variables to determine whether the local test should be performed

  # and if so, would you send a msg still

  #

  DOCPU = 'TRUE '.

  DOMSGS = 'TRUE '.

  DOPROCS = 'TRUE '.

  DODISK = 'TRUE '.

  NOCPUCOLOR = 'clear' XX set to "" If you do not want a sent message

  NOMSGSCOLOR = 'clear' # anything else will send a message to BBDISPLAY

  NODISKCOLOR = 'clear '.

  NOPROCSCOLOR = 'clear '.

  export DOMSGS DOPROCS DODISK DOCPU

  export NOCPUCOLOR NOMSGSCOLOR NODISKCOLOR NOPROCSCOLOR

  Thank you for your replies,

  Best regards

• Configuration of the L3 Switch to send the traffic to Palo Alto

  

  Please forgive my ignorance when it comes to Palo Alto. This is the first time that I do business with them. We need to ensure one VLAN located behind the Palo Alto. I am including a diagram to show a simulation of what we seek to do. We have by default VLAN1 which is our default data VLAN. We have 19 VLAN is VLAN we want it secure. The VLAN1 SVI IP is 10.1.1.1 and VLAN19 SVI IP is 10.1.2.1. On the Palo Alto, we have an IP interface was like 10.1.1.2 for default data VLAN and 10.1.2.2 for the VLAN secure. There are also a pair of HA with IPS 10.1.1.3 and 10.1.2.3 respectively. We have EIGRP that announces the network default VLAN1. Here's what we want to do. Anything from the 10.1.1.x network, go to the 10.1.2.x network, must pass through the Palo Alto. Whatever either from the 10.1.2.x network, must go through the Palo Alto as well. Nothing to any other network 10.1.1.x, takes the route by default (and), and anything from 10.1.2.x to anything else on 10.1.2.x should stay local to the LAN (not pass through Palo Alto. Need just for the MAC address arp). My question is, how do I tell my L3 switch to send all traffic created in the 10.1.2.x, through the Palestinian Authority? I can't do an IP route because from the local network VIRTUAL lives on these L3 switches and is a directly connected route. Really, I can't do the ACB on the switch, because that is really meant to routers. I can put a long match, for everything on the 10.1.2.x network (i.e. the route ip 10.1.2.7 255.255.255.255 10.1.1.2), but for some reason when do whatsoever of 10.1.2.x another thing goes on 10.1.2.x through the palo alto so. Anyone have any suggestions on what would be the best practice, from a network perspective, on how to do this? Thanks for any help!

  Looks like you want all traffic to and from the secure virtual local network to pass through the firewall of your description?

  I'm not familiar with Palo Alto firewall is so I don't know how they work in HA, IE. with other devices do you want to simply talk to a VIP which is responsible for two firewalls?

  In your example the two firewalls have an IP address per vlan, but always just use you one IP addresses for the end-end connectivity. I'll assume that you do, you may need to change, but when I say that I mean the one that reminds you of the devices for routing etc..

  So for all the traffic to and from the network 10.1.2.0/24 to go through the firewall, you must-

  (1) remove the battery switch the IVR for vlan 19. You need the firewall to be routing vlan not secure the 3750 s. You leave vlan 19 in the database for vlan.

  (2) point them vlan 19 customers as default gateway

  (3) addition of a route on the stack of 3750 for the network 10.1.2.0/24-

  IP route 10.1.2.0 255.255.255.0

  (4) if the 10.1.2.0/24 network needs to talk to other that 10.1.1.0/24 remote subnets, then for each of these networks the firewall should be a route. The syntax will not be IOS, but this should give you an idea-

  IP 10.1.1.1 road

  etc... for each remote network

  That means foregoing is all the traffic going and coming from 10.1.2.x customers to other subnets must go through the firewall. The customer traffic in the vlan secured to other clients in the vlan safe doesn't have to go the firewalls.

  Jon

• ASA Site to not tunnel no transmission of traffic for some subnets after awhile

  Hello

  We have a question really strange tunnel from site to site on several ASAs.

  We organize VPN tunnels between a small site and three largest.

  The den has an ASA 5505, the other three principles are ASA 5510.

  One of the tunnels working for months without problems.

  Each tunnel has several class C network.

  example Site:

  -192.168.50.0/24 (named A1)

  -192.168.51.0/24 (called A2)

  Site b:

  -192.168.60.0/24 (named B1)

  -192.168.61.0/24 (called B2)

  On two faulty tunnels, all is well at the beginning. After a few days (1-14) some networks to cease to work. So I can ping both A1 and A2 B1 network networks, but only from A2 B2 network. Pings from A1 to B2 doesn't expire. The ASA site showed tx = 0 traffic for <=>A1, B2, but progressive count rx traffic. ASA b it shows rx = 0 to B2<=>A1 and tx counties upward.

  This happens unexpected after different periods. Sometimes he hits ASA on site B, where tx = 0, it is sometimes ASA on A site.

  I tried to fix it as a result of orders:

  ISAKMP crypto claire his
  clear crypto ipsec his
  clear xlate

  but nothing has worked. The only solution for now is to restart the ASA where tx County indicates 0. After restarting, everything goes well for a while.

  On one of the affected sites, we have a failover configuration - ASA. A failover of the active device also solves the problem. But if you change your prior back restart the old principal question will return immediately.

  I think that there is no configuration because:

  -All tunnels are configured in the same way, and one of them is running for moths without any problem

  -Tunnels work for all combinations of subnet after a reboot

  -The problem occurs after different and long periods of time. So I think that the period between failures is long to be caused by tunnel a.s.o. timeouts.

  All ASA are running 9.1. (5) 21.

  I updated the firmware of several releases these past few months and had the same problem with any version I tested.

  So I hope that someone else has also had this problem and found a solution.

  Christian Hey!

  Hopefully, solve or find the root cause?

  Thank you

• How to send all traffic through the VPN, RV082 material v3

  Hello

  I found this guide to send all traffic to RV042 branch to the RV082 of central office:

  https://supportforums.Cisco.com/servlet/JiveServlet/downloadBody/10261-102-1-22927/Small_Business_router_tunnel_Branch_to_Main.doc

  But this guide is for the material of v2. I tried and did not work, so I wonder if there are new modules for hardware v3 (firmware v4.2)

  I have a RV042 brach office connected through the VPN Tunnel work to a central office RV082. I want to route all traffic

  Office of brach in the RV082 from the central office.

  Thank you very much

  Oliver

  Hi Oliver, this is called esp wildcard forwarding (full tunnel).

  Here are a few useful topics

  https://supportforums.Cisco.com/message/3766661

  https://supportforums.Cisco.com/message/3816181

  -Tom
  Please mark replied messages useful

• Try to send all traffic over VPN

  Hello

  I have a Cisco 871 router on my home cable modem connection. I am trying to set up a VPN, and I want to send all traffic over the VPN from connected clients (no split tunnel).

  I can connect to the VPN and I can ping/access resources on my home LAN when I'm remote but access to the internet channels.

  If its possible I would have 2 Configuration of profiles according to connection 1 connection sends all traffic to the vpn and the connection on the other split tunneling but for now, I'd be happy with everything just all traffic go via the VPN.

  Here is my config.

  10.10.10.xxx is my home network inside LAN

  10.10.20.xxx is the IP range assigned when connecting to the VPN

  FastEthernet4 is my WAN interface.

  Kernel #show run
  Building configuration...

  Current configuration: 4981 bytes
  !
  version 12.4
  service configuration
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime localtime show-timezone msec
  Log service timestamps datetime localtime show-timezone msec
  encryption password service
  sequence numbers service
  !
  hostname-Core
  !
  boot-start-marker
  boot-end-marker
  !
  Security of authentication failure rate 3 log
  Passwords security min-length 6
  forest-meter operation of syslog messages
  no set record in buffered memory
  enable secret 5 XXXXX
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login ciscocp_vpn_xauth_ml_1 local
  AAA authorization exec default local
  AAA authorization ciscocp_vpn_group_ml_1 LAN
  !
  !
  AAA - the id of the joint session
  !
  Crypto pki trustpoint Core_Certificate
  enrollment selfsigned
  Serial number no
  IP address no
  crl revocation checking
  rsakeypair 512 Core_Certificate_RSAKey
  !
  !
  string Core_Certificate crypto pki certificates
  certificate self-signed 01
  XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
  quit smoking
  dot11 syslog
  no ip source route
  !
  !
  !
  !
  IP cef
  no ip bootp Server
  name of the IP-server 75.75.75.75
  name of the IP-server 75.75.76.76
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  password username privilege 15 7 XXXXXXXXXXXXX XXXXXXXX
  username secret privilege 15 XXXXXXXX XXXXXXXXXXXXX 5
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP client configuration main group
  key to XXXXXXX
  DNS 75.75.75.75 75.75.76.76
  pool SDM_POOL_3
  Max-users 5
  netmask 255.255.255.0
  ISAKMP crypto ciscocp-ike-profile-1 profile
  main group identity match
  client authentication list ciscocp_vpn_xauth_ml_1
  ISAKMP authorization list ciscocp_vpn_group_ml_1
  client configuration address respond
  virtual-model 1
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  !
  Profile of crypto ipsec CiscoCP_Profile1
  game of transformation-ESP-3DES-SHA
  set of isakmp - profile ciscocp-ike-profile-1
  !
  !
  Crypto ctcp port 64444
  Archives
  The config log
  hidekeys
  !
  !
  synwait-time of tcp IP 10
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh version 1
  !
  !
  !
  Null0 interface
  no ip unreachable
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface FastEthernet4
  Description $ETH - WAN$ $FW_OUTSIDE$
  address IP dhcp client id FastEthernet4
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  type of interface virtual-Template1 tunnel
  Description $FW_INSIDE$
  IP unnumbered FastEthernet4
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  ipv4 ipsec tunnel mode
  Tunnel CiscoCP_Profile1 ipsec protection profile
  !
  interface Vlan1
  Description $FW_INSIDE$
  IP 10.10.10.1 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  IP nat inside
  IP virtual-reassembly
  !
  local IP SDM_POOL_1 10.10.30.10 pool 10.10.30.15
  local IP SDM_POOL_2 10.10.10.80 pool 10.10.10.85
  local IP SDM_POOL_3 10.10.20.10 pool 10.10.20.15
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 permanent FastEthernet4
  IP http server
  access-class 2 IP http
  local IP http authentication
  no ip http secure server
  !
  !
  the IP nat inside source 1 list the interface FastEthernet4 overload
  !
  Note category of access list 1 = 2 CCP_ACL
  access-list 1 permit 10.10.5.0 0.0.0.255
  access-list 1 permit 10.10.10.0 0.0.0.255
  access-list 2 Note HTTP access class
  Note access-list category 2 CCP_ACL = 1
  access-list 2 allow 10.10.10.0 0.0.0.255
  access-list 2 refuse any
  not run cdp

  !
  !
  !
  !
  !
  control plan
  !
  connection of the banner ^ CThis is a private router and all access is controlled and connected. ^ C
  !
  Line con 0
  no activation of the modem
  telnet output transport
  line to 0
  telnet output transport
  line vty 0 4
  access-class 2
  entry ssh transport
  !
  max-task-time 5000 Planner
  Scheduler allocate 4000 1000
  Scheduler interval 500
  end

  Kernel #.

  Thanks for your help!

  Hi Joseph,.

  You need a configuration like this:

  customer pool: 10.10.20.0

  local networkbehind router: 10.10.10.0

  R (config) #ip - list extended access 101
  R (config-ext-nacl) 10.10.20.0 ip #deny 0.0.0.255 10.10.10.0 0.0.0.255
  R (config-ext-nacl) 10.10.20.0 ip #permit 0.0.0.255 any

  type of interface virtual-Template1 tunnel
  Description $FW_INSIDE$
  political IP VPN route map

  R (config) #ip - list extended access 103
  R (config-ext-nacl) #permit ip all 10.10.20.0 0.0.0.255

  R (config) #route - map allowed VPN 10
  Ip address of R #match (config-route-map) 101
  R (config-route-map) #set interface loopback1
  R (config) #route - map allowed VPN 20
  Ip address of R #match (config-route-map) 103
  R (config-route-map) #set interface loopback1

  You must now exonerated NAT for VPN traffic:

  ===================================

  R (config) #ip - 102 extended access list
  R #deny (config-ext-nacl) ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
  R (config-ext-nacl) 10.10.10.0 ip #permit 0.0.0.255 any
  R (config-ext-nacl) 10.10.20.0 ip #deny 0.0.0.255 10.10.10.0 0.0.0.255
  R (config-ext-nacl) 10.10.20.0 ip #permit 0.0.0.255 any

  overload of IP nat inside source list 102 interface FastEthernet4

  Let me know if this can help,

  See you soon,.

  Christian V

• Send all traffic through the vpn tunnel

  Does anyone know how to send all traffic through the tunnel vpn on both sides?  I have a server EZVpn on one side and one EZVpn client on the other.  I'm not natting on each side.  I use the value default 'tunnelall' for the attributes of group policy.  On the client side all traffic, even if not intended for the subnet of the side server, seems to pass through the tunnel.  But if I ping the side server, the same rules don't seem to apply.  Traffic destined for rates aside customer through the tunnel, but the traffic that is not pumped on the external interface in the clear.  That's not cool.

  Hello

  Clinet traffic to server through tunnel, that's right, right?

  Traffic from server to client through tunnel, but the rest of the traffic is not, no?

  This works as expected because in ezvpn, politics of "tunnel all ' is for traffic is coming from the client., do not leave the server.

  Side server, customer traffic will pass through tunnel, the rest used.

  Sian

• Automatic Certifcate sending cease &amp; CertviewCertHist for 4 countries

  To the moderator of the Forum of Certification or similar authority.
  
  Page: https://education.oracle.com/pls/eval-eddap-dcd/ocp_interface.certification_history
  
  Under: why the my certification doesn't show up there?
  
  Top of page reason/explanation here is:
  

  Why does my certification not show up here?
  
      You are in India, China, Bangladesh or Mexico
          If you are in one of these countries, you will receive your certificate via email in the form of an eCertificate within 3-4 business days of completing all certification requirements. You can request a hard copy of your certificate. There will be directions for requesting the hard copy in the eCertificate email you receive. When you receive the requested hard copy, you will receive the items mentioned above in your kit.

  I read that:
  For people in India, China, Bangladesh or Mexico
  [1] * they will not get their certification appearing in certview history.
  [2] * him will only get a check e-mail... unless...
  [3] ......... They ask for a paper copy of the attestation that circumstance will be a success kit be sent.
  
  
  Verification by using the Center I note the following:
  
  ==========
  When and how will I receive my certificate of OCP?
  
  The test centre will send the outcome of your review for the Oracle Certification program. All the results are processed on a daily basis. Once all the certification requirements within the track you are pursuing were complete, including the preparation and approval of the form of presentation of course, you should receive your kit of success certification by mail in 6-8 weeks, if you are not in India, Bangladesh, China, or the Mexico. The success Kit, you will receive by mail will include a certificate personalised as well as instructions on how to get your Certification Oracle logo.
  
  Due to the high rate of problems with delivery in India, Bangladesh, China and Mexico, candidates in these countries will receive the certificate by e-mail within 3-4 business days from the time that all certification requirements are completed.
  
  The email will come from [email protected], with the subject: do NOT delete! Your Oracle Certification eCertificate - download now.
  
  The e-mail will contain instructions to request a paper copy of your certificate. If you are in one of these countries, check the email address in your Pearson VIEW profile for your certificate. If you have not received the cheque, please check CertView as well as your spam and junk mail folders before contacting the Support of Oracle Certification.
  
  About 24-48 hours after completing certification requirements (including fill the form of presentation of courses for securities that need training), your certification file should show in the candidate self-service, CertView tool. You can watch free demos of Certview here.
  
  The link CertView will take you to a screen to authorize your account. You will need your e-mail address of IDand test Oracle. You must enter this information exactly as it is in your VUEprofile of Pearson. Once you have authorized your account, you can connect to CertView at any time by using your Oracle Single Sign On (SSO) (you will be able to create a single sign from the link CertView if you don't have one already) and see if your kit has been processed. Once your certification appears in CertView, you will be able to access your logos through the tool.
  
  If you don't receive your Oracle certification success kit in 4 to 6 weeks from the date of shipment in CertView, please contact the Support of Oracle Certification and provide your name, credentials earned Oracle Certification program, Oracle test ID number, current mailing address, and phone number.
  
  =======
  
  
  Hmmmm...
  ..... I had not appreciated that change, or when he came in... and may have been responding to some wires incorrectly as a result. That said, I'm not sure if some of the statements are quite unambiguous. And perhaps not very useful if Pearson VIEW/Certview continue to go badly.
  
  Welocme comments.

  Thanks for the comment/feedback. We will review this content to see if we can make it clearer. For clarity, here on the forum:

  -Review of results and stories of Certification will appear here in CertView for all tests for all candidates worldwide. The exceptions will be acquisitions, each of them have slightly different guidelines. For any Certification exam Oracle that you took at Pearson, the results of the examinations resulting and certifications will be in CertView regardless of what country you live in.
  -Applicants in India, China, Bangladesh and the Mexico will initially be only a soft copy of their real certificate. They will only receive a paper copy, if they demand through the procedure described in the e-mail they have received and which also contained the certificate.

  Thank you
  Brandye Barrington
  Certification Forum Moderator

• I can't send messages, whatsapp for group discussions and I think that is the update of ios software that is not compatible with my iphone 5 s

  I can't send messages, whatsapp for group discussions and I feel really lost. my friends can't receive my message and I am only able to send individual text messages. I think that its because of the version update of ios which is not compatible with my iphone 5 s. is a solution to this problem?

  I have the same problem, started this morning.

  I'm in iOS 9.1, using the iPhone 6. Don't know what happened, but I have also opened a disturbance with Whatsapp support as well.

  A focus group work, group chat messages cannot be delivered. Individual messages are working properly. I tried to remove and reinstall the application, remove the discussion group and recreate, all has not helped.

  A lack of ideas.

• What is the best approach for a same code used for 16 test stations

  I write code for 16 testbeds that are all the same, except that different circuits CAN are used, i.e. CAN0 through CAN15. The approach that I plan to use is 16 screws, one for each test station executes independently and in parallel, meaning that they can be stopped and started at different times. Each of the 16 screws have about 10 complex subVIs that are all the same. Even if I do not use uninitialized shift registers, I wonder if there is no advantage to using a reentrant approach, or even if it works for my application. Any suggestions are appreciated as I have no experience using the reentrant approach.

  Thank you.

  First of all, you should get used to use projects. They are very useful. If the code is in a project, you can open the VI from there.

• I need to send my laptop for repairs. Is there a way to secure all files in My Documents to prevent them from be read? OS is XP.

  I need to send my laptop for repairs. Is there a way to secure all files in My Documents to prevent them from be read? OS is XP. I don't want to remove them from the laptop - contains any installed programs, etc.

  I need to send my laptop for repairs. Is there a way to secure all files in My Documents to prevent them from be read? OS is XP. I don't want to remove them from the laptop - contains any installed programs, etc.

  Encrypt files...   http://support.Microsoft.com/kb/308989

  But do it on your own windows login, it is password protected so technicians can not access (let connect them only on a guest account).  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/ua_provide_guest_account_w.mspx?mfr=true

• where should I send my Tablet for warranty repair

  Where should I send my Tablet for warranty repair

  mrnunn1 wrote:

  Where should I send my Tablet for warranty repair

  Hello and welcome to the HP support community!

  HP serves its customers from all countries of the world!  There is no place 'set' for returns.   You will need to arrange with HP yourself.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/contact.html

  WyreNut

• ASA 8.3 VPN site-to-site does not UDP traffic to other peer

  Hello!!!

  Someone turned off the lights :-) I say this because that's 6.2 6.3 I can't get the basic things...

  On a SAA, I created a "site-site" VPN profile to connect to a remote site, on the other side (ASA 8.2) sees no problem, I can pass all IP traffic via VPN without NAT; but on a new ASA5505 with 8.3 (1) version fw and ASDM 6.3 (1) can't do that in any way :-(

  What I get is trivial...

  ... It works perfectly with TCP and ICMP traffic, but does not have UDP traffic: in practice, if I followed the traffic to a remote private IP, TCP and ICMP traffic I see only packets in vlan "inside" with the private IP, but with the UDP traffic on top of that, I see traffic on vlan 'out' with the IP public ASA and source port changed :

  Inside: UDP to 172.16.2.128:6000 to 172.16.0.200:6000
  Outside: UDP to 5.5.5.5:23400 to 172.16.0.200:6000

  Why?

  Of course, the traffic is not encrypted and does not reach the other side of the tunnel!

  Here are the important parts of the configuration:

  interface Vlan1
  nameif inside
  security-level 100
  172.16.2.1 IP address 255.255.255.0

  network obj_any object
  subnet 0.0.0.0 0.0.0.0

  remote network object
  172.16.0.0 subnet 255.255.254.0

  outside_cryptomap to access extended list ip 172.16.2.0 allow 255.255.255.0 network remote control object

  NAT (inside, outside) static source any any destination static remote-remote network

  network obj_any object

  NAT dynamic interface (indoor, outdoor)

  card crypto outside_map0 1 match address outside_cryptomap

  outside_map0 card crypto 1jeu pfs

  card crypto outside_map0 1 set ip.ip.ip.ip counterpart

  outside_map0 card crypto 1jeu nat-t-disable

  outside_map0 interface card crypto outside

  Given that the new business object, I have not yet quite clear (ok, I don't find time to do a deep reading of the documentation), someone is able to direct me to fix this trivial?

  Note: If I remove my drive manual nat and I flag "network translating" on the remote network object thus indicate that they want NAT with ip network remote control then don't work any IP vs. remote site traffic. Why, why have not more than the simple rules of 'nat exception' the old version and why the crypto-plan applies only to TCP traffic? Possible that there is an object any which takes all IP traffic?

  A big thank you to all.

  73,

  Arturo

  Hi Arturo,.

  I know that there is a certain NAT related bugs in 8.3 (1) and although I don't remember a specific which corresponds to your symptoms, I would say you try 8.3 (2) instead, or maybe even the last available version of a temp (currently to 8.3 (2.4):)

  http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=8.3.2+Interim&mdfid=279916854&sftType=Adaptive+Security+Appliance+%28ASA%29+Software&optPlat=&nodecount=9&edesignator=null&modelName=Cisco+ASA+5510+Adaptive+Security+Appliance&treeMdfId=268438162&modifmdfid=&imname=&treeName=Security&hybrid=Y&imst=N

  If you still see the problem, then, check

  entry Packet-trace within the udp 172.16.2.2 1025 172.16.0.1 detail 123

  entry Packet-trace inside tcp 172.16.2.2 1025 172.16.0.1 detail 123

  and check what's different.

  HTH

  Herbert

• How the transmitter unit will indicate whether or not it has finished sending a message for TCP/IP other network protocols?

  How the transmitter unit will indicate whether or not it has finished sending a message for TCP/IP other network protocols?

  Hello

  I suggest you post your query in the TechNet Forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  It will be useful.