Configuration of the L3 Switch to send the traffic to Palo Alto

Similar Questions

• Update the Configuration of the switch switch 2.1 Executive to 3.5

  Hello world

  I tried the switch 2.1 update Executive to 3.5 and have known, that my configurations have stoppped working. To me, it looks like 3.5 dislikes my IVI configuration for switching modules.

  The function check in MAX tells me that the PXI cards are not available. The first page of the configuration of the switch shows no configuration / terminal blocks.

  Because the configuration consists of nine matrix with lots of report cards, I would really appreciate a way to properly import the old configurations (xml files are available)

  Any ideas?

  See you soon

  Oli

  Hi Oli,

  Yes, there was a major change in the Switch Executive 3.5 - it now uses for switching NI DAQmx calls material. There is a KB document the upgrade process a simulated configuration from an earlier version, but of course, you can try the steps that make sense, too:

  Import of NI Switch Executive 3.0 and previous virtual devices in OR Switch Executive 3.5 and later versions

  http://digital.NI.com/public.nsf/allkb/1D1099A85B156FA68625778500787444

  However, I have noticed that the KB Editor uses a configuration file to .txt instead of the .xml you have. I see two options here: first of all, if you have even an operating system with Switch Executive 2.1, you could probably export settings in the form of text or you can try to modify the .xml file manually to resemble the layout of the text (probably a lot of work, you would have to learn the structure of the text by trial and error using newly created Switch E.g. 3.5 configurations...)

  Best regards

  Sebastian

• How to use 3750 in any configuration of the battery

  We have just received a 3750 that has been configured as a member of the stack.  They just turned off the switches and send a us, and I would like to use it as a stand alone with no configuration of the battery.  I have tried everything I know, and he still regards as his share of a pile.  Do I need to use a different IOS?  Is it possible to use 3750 without stacking it?  No idea how to get it to function as a stand-alone switch completely?

  Thank you

  Hi Isala,

  I understand the configuration you need, but as we think we can see that you will definitely use 3750 2 switches and they won't have to connect through a cable of the battery.

  If they do not have to connect through a cable of the battery then they will certainly not going to be in the same stack thsu they can work as master of the battery and that will not affect them.

  And as we know that HSRP is standard Cisco allowing the high network availability by provide redundancy to first jump to the hosts IP on an IEEE 802 LAN configured with a default gateway IP address. If switch 2 will work individuallly so they are not stacked.

  If you want you can even chat with me on 408-916-9070 Ext 3076

• Several Airport Apple ID devices disappear shared devices and Software Configuration of the airport

  We have three Airport extreme and two Airport Express devices in two offices in the city.  Some time in the last two days, they all stopped appearing in the sidebar of Finder 'Shared' category (if they had attached disk storage) and they stopped from appearing in the Configuration software of the airport on any of the Mac on these networks. (They always seem to be correct, routing traffic, however).

  For a while, we left a desktop completely alone as a control group and did all our testing and troubleshooting in the other office.

  We-hard reset (to the factory configuration) all devices from the airport to an office. They began to appear again. Then we started to re - configure them again.  At the time wherever we had updated the devices they had disappeared again.

  So, another factory discount based configutations for each device to this facility. Then we added slowly in pieces of their configuration.  When airports have received Apple ID and associated passwords for associating with iCloud/BackToMyMac/WideAreaBonjour (depending on what you want to call it), the airport devices disappeared from the airport Setup.

  If we tried to configure another device from the airport to extend a network of 'invisible' airports, the new airports were "unable to find" one of these networks to expand.

  If we reset all devices without providing them with Apple ID and passwords, they worked mainly as you would expect. The main difference being now do not appear as having been recorded as BackToMyMac/WideAreaBonjour devices.

  One side for people dealing with this note: If your router are invisible, but they are configured to be configured from the EXTENSIVE worldwide network, you can use "File-> configure the other" and specify the address WAN of the missing aircraft and get this screen access as one would generally. From here, remove all the Apple ID associated with these devices, press "Refresh" to save the settings and they seem to reappear magically in the Configuration of the airport software.

  In that State, storage seems to be available, but only for devices in Domain Local (direct connection). Airports without AppleIDs will not appear in the field to iCloud/BackToMyMac/WideAreaBonjour, and it's as expected, given that these IDS is the means for the identification of their field.

  If someone else has noted these behaviors and if so, have an idea about specifically when they first appeared? Is there by any chance someone who knows of any change in registration or the MWAC of multiplication?

  Did you approach the problem exactly as I did in the past, and having encountered problems of the CCMM literally every version of OS X. They were all distinct problems with individual characteristics, and in some cases the solutions exist. Having said that the CCMM has been completely reliable recently - which means running the most recent El Capitan release on all my Macs. The initial versions (i.e. OS X 10.11 to 10.11.3 maybe) didn't work at all. I don't know which version fixed whatever the problem was, I am sure he has not worked for someone else.

  The same real place with Yosemite and previous versions as well. CCMM did not reliable until the exit "point three or four."

  Through these experiments, I believe it should be a pretty fast connection. If the connection between a Mac and all the others does not meet this requirement (whatever that is) all you will be able to determine, it's that the CCMM fails.

  Apple is characteristically silent about the technical aspects of the CCMM, probably because of security concerns. Nobody outside Apple knows how it works. If you're still having problems, I encourage you to contact them. After mentioning predictable you corrective raw materials (the two following links) you will be put in touch with someone who will look to what is false, providing diagnostic assistance and send your information to engineering. If it's something they should fix, you'll know not to the point of an OS X update is published.

  Set up and use Back to My Mac - Apple Support

  Get help using Back to My Mac - Apple Support

  With all the conversations I had with Apple on this topic (which were many, involving a large amount of tests) not once they disclose any causal factors individual, other than to reiterate the need to run the last OS X, versions and the latest versions of firmware for their routers. In your case, that means probably that your Mac update to El Capitan. It is after all the very first recommendation in their document of support above, until you do this you will still not get in step 1.

• Configuration of the BIOS XW8600 for SSD and HDD

  Until recently, my xw8600 has been configured with the emulation of SATA under storage on the separate IDE controller Options.  250 GB hard drives connected to the SATA 1 and SATA ports 0 and readers of DVD RW Drive connected to 2 SATA and SATA 3 ports.

  I wanted to install a GTX240 Neutron Corsair SSD, but discovered when I changed the SATA RAID + DCIS emulation (to activate all 5 ports of SATA controller and optimize the performance of the SSD), the system could not find the boot drive.  I checked the startup command settings and found the slot drive HARD listed title module of memory into the attached USB printer HP Officejet 7500 a first and could not be changed.

  I decided to go back to SATA IDE emulation separate, remove the optical drive on SATA 2 port and attach the SSD it.  This facility is expected to start successfully; but after installing windows 7 x 64 on the SSD (Windows XP, x 64, still on the HARD drive), I found Windows 7 has been very very slow.

  Can anyone offer any suggestions or comments on how I can improve this situation?

  Thanks for any help, you can suggest.

  What is an installation of Windows 7 Pro 64 - bit of a retail installation DVD purchase, or something HP?  If I remember well Vista 64 was the latest HP OS with sold.  In this case you won't have to deal with a set of HP restore disks.  I would never do an "upgrade" of a prior installation of OS in W7.  I only do not clean install W7 on a freshly long-type reformatted hard drive or an SSD.  I buy my "system builder" OEM license W7Pro 64 - bit DVD/COA from newegg.com (you can find that many sources and approximately 140.00 each).

  Plan to do a clean install on this SSD from scratch and when you format before that settle does long formatting version, while it is booted from the W7 DVD.  That will take some time.  Or, if you have a functioning before the OS install on a hard drive, you can restore the xw8600 you can connect the SSD in the second or third SATA port and reformat (long version) management of records like this.

  The boot drive or SSD, Spinner, must always be connected to the primary SATA port, which in these workstations, is usually blue plastic, while the rest are a dark black.

  Make sure that your BIOS is later... There was a version for this and the xw6600 with a few months ago.  It is an important.

  Put the SSD in your favorite mount, hang it in the main SATA port, prepare the W7 DVD in the DVD drive (which should be attached to the second port SATA or IDE cable if it's a DVD ATA drive). Throwing xw8600, go straight into the BIOS and go to which you can change the SATA emulation.  Change that on "RAID + AHCI.  Save on the way out of the BIOS, and the workstation will now reboot usually requiring formal approval of the change F1.

  Demarrer start on the DVD, select clean install and things will be fine.  I usually set my boot order to start hard drive/SSD first and second optical drive.  Then, when I load an OS I just use the F9 key during the early start to switch to the DVD player for this single event.

  It's the key information: If you have correctly set to "RAID + AHCI" SATA emulation for the W7 installation process, then the appropriate drivers will not be loaded from the DVD on the startup disk, and you won't receive anywhere near your expected speed.  I helped a friend who had done exactly what you did, and when we corrected things literally double SSD performance scores.  I recommend that the reformatting/clean reinstall from zero here, because you want to really perfect the basics and the way he was treated initially can leave you with a few important questions.

  After you have things working with the SSD and the DVD player you can add in your other material sequentially.  I would like to make a reboot between each addition, just be very careful.  Some old HP DVD drives have a problem with W764 loading during the emulation of the SATA BIOS is set correctly and there is a solution for this, but you don't want from now this info.

  All the advice I have written in this forum about the xw6400 installs apply to the xw6600 and xw8600, including information on the upgrades of the processor.

  Let us know how things are, so that others can enjoy...

• HL-DT-ST DVDRAM GSA - T10N ATA Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Hello

  My DVD/RW drive stopped responding on my Acer Aspire laptop computer 4510Z I checked the Device Manager which is gives the following error message:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I solve this error so far achieved the following without success:

  -Checked for solutions using the button below the error message
  -Scanned for hardware changes
  -Used Microsoft Automated Troubleshooting Service (SMAT)
  -Created the cdfix.reg file, it has added to the registry and restarted the computer

  I would be so gratefull for any help anyone can offer.

  Darylandgoats

  Hello

  I oddly found the solution to my problem while browsing through the suggestions of SpritX at the following link: http://forums.techarena.in/vista-help/771598.htm

  Here is the solution I implemented and now my drive works perfectly:

  RESOLUTION
  Warning serious problems might occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  To resolve this problem, remove the affected filter drivers. To do this, follow these steps: 1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. Locate and then click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  Be careful it can be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.
  3. in the right pane, click UpperFilters, and then click on remove.
  4. click on Yes to confirm the deletion of the UpperFilters registry entry.
  5. in the right pane, click LowerFilters, and then click on remove.
  6. click on Yes to confirm the deletion of the LowerFilters registry entry.
  7. exit the registry editor and then restart the computer.
  Note When you delete the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

  For information about how to contact computer software vendors, click the number in the following list to view the article in the Microsoft Knowledge Base:
  65416 (http://support.microsoft.com/kb/65416/) hardware and software contact information, A - K

  60781 (http://support.microsoft.com/kb/60781/) hardware and software details, L.-P.

  60782 (http://support.microsoft.com/kb/60782/) hardware and software contact information, Q - Z

  Thank you!

• Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  My DVD RW drive, Optiarc AD7530B has stopped working. I get this error message in Device Manager:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Verification of the solution does not anywhere - thanks Microsoft!

  Anyone know if there is a resolution to this?  The car was working fine so it must be one of these "Windows Updates" which does its magic.

  Hello

  Check these for the good info on CD/DVD - maybe someone with the same unit can give you all the
  correct the registry settings to try. And the drive could be bad.

  CD/DVD units
  http://www.myce.com/storage/

  Forums - a lot of expert real help
  http://Club.myce.com/
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• How to check the system configuration of the SX20 if the touch screen and the remote control does not work

  Hello friends, would like to know how can we access/check the system configuration of the SX20 if we not touch and remote control or they are not in working condition.

  I think that we can check this Switch interface, but unfortunately, I don't have access to the local switch right now.

  Hello

  option is to have access to the local switch and run "show cdp neighbors detail."

  or

  Connect the mobile to PC/computer LAN, run tftpd32 with affected DHCP pool. Then you can login to get the config.

  regds,

  Aman

• Configuration of the channel of port on nexus 1000V

  Hello

  I'm new on nexus 1000V, the configuration is as follows, UCS chassis with 4 blades full-width connected to 2 FI 6248UP.

  each FI's uplink to a n5k (no mail ORDER).

  is there any configuration model the nexus 1000v? How to configure port-channel?

  Thank you.

  Hello

  We recommend using mac pinning ("channel-group auto mode on mac - pinning") when N1KV is used on the blades of the UCS.

  Next doc provides good overview on best practices.

  Best practices in deploying Cisco Nexus 1000V switches in the Cisco UCS B and C series series Cisco UCS Manager servers

  http://www.Cisco.com/en/us/prod/collateral/switches/ps9441/ps9902/white_paper_c11-558242.html

  HTH

  Padma

• Configuration of the Interface under... Required main line?

  ASA5520: I'm trying to implement a subinterface for my 2 apart from the IPs (we have 2 pipes entering the data center). I just added a configuration with 2 secondary Interfaces because I didn't have enough ports with the help of g0/3 of our Interface failover (active / standby config). I was just wondering if I need to set up a trunk as to allow the communication? I have attached all ports on a switch and tried ping the secondary Interfaces of a server on the same subnet, but I can't ping interfaces. I have not implemented a main line and I was wondering if this would be the reason? I use a Dell 2724 switch so maybe that's the reason why it won't work? I could * really * use to help with this problem because I am at a loss... I added my current config to post so I hope this helps to clarify my situation and the installation program.

  See the ICM-asa01 (config) # executes

  : Saved

  :

  ASA Version 7.0 (4)

  !

  icm-xxxxx host name

  xxxxxxxx.com domain name

  !

  interface GigabitEthernet0/0

  No nameif

  security-level 0

  no ip address

  !

  interface GigabitEthernet0/0.1

  VLAN 10

  nameif Outside1

  security-level 0

  IP address 66.38.x.x 255.255.x.x Eve 66.38.x.x

  !

  interface GigabitEthernet0/0.2

  VLAN 20

  nameif Outside2

  security-level 0

  IP address 64.187.x.x 255.255.x.x Eve 64.187.x.x

  !

  interface GigabitEthernet0/1

  nameif DMZ

  security-level 100

  IP address 255.255.x.x 10.10.x.x ensures 10.10.x.x

  !

  interface GigabitEthernet0/2

  nameif private

  security-level 40

  IP address 255.255.x.x 192.168.x.x ensures 192.168.x.x

  !

  interface GigabitEthernet0/3

  STATE/LAN failover Interface Description

  !

  interface Management0/0

  STATE failover Interface Description

  No nameif

  security-level 100

  IP address 192.168.x.x 255.255.x.x

  !

  passive FTP mode

  clock timezone IS - 5

  clock to summer time EDT recurring

  pager lines 24

  Enable logging

  monitor debug logging

  asdm of logging of information

  MTU 1500 Outside1

  MTU 1500 Outside2

  MTU 1500 DMZ

  MTU 1500 private

  failover

  primary failover lan unit

  local failover FoInt GigabitEthernet0/3 network interface

  failover replication http

  link failover FoInt GigabitEthernet0/3

  failover interface ip FoInt 192.168.x.x 255.255.x.x Eve 192.168.x.x

  the interface of the monitor Outside1

  the interface of the monitor Outside2

  Thank you

  Chris

  Hi Chris,

  When you have created a sub-intf, it will automatically set the physical interface to use the trunk with dot1Q encap. No order of trunk/encap is required compared to spend. The rest must be supported by the switch, for example allowing to what vlan borrow and be associated with the respective subinterface.

  For example, if your Outside2 of Outside1 & is associated with the Vlan 10 and Vlan 20 respectively, the trunk of the switch (with dot1Q encap) must allow to these VLANS to pass through. Other than that, the configured IP subnet will determine how the traffic on the side switch vlan reach vlan firewall-side

  Rgds,

  AK

• VLANS can be configured at the vSwitch and Portgroup level?

  Dear friends,

  I hope that all do you good...

  Two statements are true about groups of ports and VLAN defined on a switch vNetwork Standard? (Choose two)

  A. A VLAN can be configured for the entire virtual switch or on groups of individual ports

  B. several groups of ports can specify the same VLAN

  C. VLAN can only be configured on individual port groups

  D. several VLANS can be specified in a port group

  VLANS can be configured at the vSwitch and Portgroup level?

  B. several groups of ports can specify the same VLAN

  C. VLAN can only be configured on individual port groups

• error "could not complete the configuration of the ha agent on the host computer.". bad configuration of the host network.

  Hola y buenos dias

  me esta dando este error cuando a UN con cluster 2 hots the digo el HA assets. There buscado por internet y the mayoria of las hacen referencia a lo mismo responses:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1039108

  The config of VMware high availability (HA) falla con el error: unable to complete the configuration of the HA agent on the host

  Symptoms

  Resignation: this article traduccion of one ' configuration VMware High Availability fails with the error: unable to complete the configuration of the HA agent on the host "(1019200). Los items han sido traducidos en Español multiple in el mejor esfuerzo. Sin embargo el contenido o can meet desactualizado specific location. Para revisar el contenido mas reciente, please consult el article in English.

  • The config of falla of VMware high availability (HA)
    
  • El client vSphere muestra una Cònsola de Servicio, sin embargo al run el comando esxcfg-vswif - l cuando is esta conectado has the console of Servicio de ESX is revelan consolas additional service
    
  • Following messages appears:
    
    
    • Cannot complete the configuration of the HA agent on the host. See the details of the task for more information.
      
    • Misconfiguration of the network host installation
      
      

  Resolution

  Este problema compares cuando no todos los servidores del cluster the same comparten consoled of servicio o the same config administration of red. Some servidores pueden tener consolas service using numbers different o pueden tener mas that consolas otros servidores.
  
  For example, este error can suceder tambien if the config of the puerta of enlace (gateway) of VMkernel none are the same para todos los servidores del cluster. Para Québec the config, haga click derecho in los servidores con este error y select reconfigure for HA.
  
  Revise las differences in the Red between los servidores config if usted goes a usar por Auto (off o Power Off) x responses, porque estas options provocan eventos registro 'VMware HA isolation' and consoled her of servicio o el registro fallas of administration of red.
  
  If using the funcion esta: VM left the lights on in answer of x, the opcion para ignorar estos messages is available VMware VirtualCenter 2.5 update 3.
  
  Para configurar VirtualCenter para ignorar estos messages, configure the option advanced das.bypassNetCompatCheck como 'true '.
  
  Nota: Cuando esta using the option das.bypassNetCompatCheck, El mechanism of pulse used during the solo en VirtualCenter 2.5 relaciona config direcciones IP simétricas subredes dentro a traves of los nodos. For example, en UN back nodos cluster, if a server has "Service Console" 10.10.1.x 255.255.255.0 vSwif0 tiene y vSwif1 "Service 2" 10.10.5.x Console y el servidor tiene vSwif0 "Service Console" 10.10.2.x 255.255.255.0 B y vSwif1 "Service 2" 10.10.5.x, el pulsation solo opera Console sober vSwif1.»» Desde vCenter Server 4.0, can be related through subredes, hacer TR 'Ping' between subredes are allowed. Sin embargo on VMware is replaced by Recomiendan tenerlas Las subredes dentro.

  1. Haga click derecho in el cluster, luego haga click change settings.
     
  2. Quite the selection to turn on VMware HA.
     
  3. Hope a todos los servidores en el quiten HA cluster.
     
  4. Haga click derecho in el cluster, elija y change the settings.
  
  
• Select turn on VMware HA, luego elija VMware HA desde el cuadro of the izquierda.


• Select Advanced options.
  
• Adicione opcion das.bypassNetCompatCheck con el valor 'true '.
  
• Haga click OK in the options advanced, luego haga click en OK again pantalla para aceptar los cambios in el cluster config.
  
• Hope a todos los servidores ESX in el reconfiguren HA cluster.
  

El tema are that he made lo go y sigo don't con el mismo error y no lo tengo claro what me escapa.

OS explico mi arquitectura

Cluster development: 2 hots ESXi HA con 4.1U1 en mi red (the same as el vCenter)

* Cluster production: 6 Hots ESX HA con 4.1U1 en mi red (the same as el vCenter)
* Cluster DMZ: 1 Hots ESXi 4.1U1 esta en UN behind del cortafuegos Swicth how, y todo el trafico between el host y el esta allowed vCenter
* NuevaDMZ cluster: 2 Hots ESXi 4.1U1 ante las nuevas needs y ante together por parte del responsible of poner seguridad como DMZ is replaced by vmware Recomiendan to vuelve a poner the same config as the DMZ real osea, estan en UN behind del cortafuegos Swicth how, y todo el trafico between los hosts y el esta allowed vCenter.
El switch DMZ y nueva DMZ of course are the same.
Editor rated UN of fotos explicativas.
01.intro good example of config del cluster ESXi Québec TR cluster is activa el HA
version of 02.VM02 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
version of 03.vm03 y config of Red TO host led (Eliminado porque no puedo mas undergo 5 Fotos)
04.the HA configuration config del cluster as falla
version 05.VM04 y config del SO red host
version 06.vm05 y config del SO red host
07.immolation error pues eso el

• Problem in the configuration of the workflow mailer

  
  Hi all

  I have to configure the sender of the notification, for this, I have an IP address of the smtp server and email user name and password. Using these 3 details I can configure mail in MS Outlook and send/receive emails. When I give the same details in the Notification mailer page, I'm getting relay denied error. Please help me solve this.

  Our environment is R12.1.3 on AIX 6.1

  Kind regards

  Cherkaoui

  See pl MOS 753845.1 Doc - relay must be activated

  HTH
  Srini

• configuration of the integration broker

  could someone please help me understand how to configure integration broker between two peoplesoft applications and how it works?

  If you look at the peoplebooks bound Nicolas I think there it details well enough, but here are some things to consider in my experience and how I could explain it to someone... it's maybe not as technically correct as it should, but is more designed to help you understand the concepts.

  Think of remote nodes like "destination definitions."
  Think bridges as a "gateway to a destination.
  Think as the gateways connectors is the code for 'to connect to the destination.

  Then starting at the top...
  A service operation of East message we want to send from Point A to Point B
  the service operation has a routing... Which destinations it comes, goes and his leadership. for example, these are configured by setting the routing from the node A to node B, out . Node B is a remote node. Without him, how else tell us the system where to send the message. It is remote, because it is an external system.

  Because the methods of connection or connectors are programmed at the level of the Bridge , we associate the node with a gateway and a Connector on the connectors of the node definition page tab. In peoplesoft for peoplesoft, we use the PSFTTARGET connector that can be defined on either a local or a remote Gateway.

  the best way for me to help you differentiate the gateways remote vs local is to think of bridges like this. A local gateway can be a bridge whose local node of this particular PeopleSoft system defined in him and whose configuration of the appropriate connectivity (he knows how to deliver incoming messages directly to our application server processes). A remote gateway is one that does not have the local node specified in its files gateway.properties and therefor can not connect to us directly. It may be behind a firewall to another place, but a local node of the destination set and is the local gateway for this destination system.

  On a side note, changing the type of Connector changes how we configure things.
  Connector PSFTTARGET to ensure that the node is referenced in the gateway.properties file.
  for a HTTPTARGET connector put us nothing in the file gateway.properties, instead, the connector on the node tab will allow us to specify a URL it is recorded in the database on the definition of the node.

  We have the remote nodes to define our destination point
  our node needs a gateway because it is where the connectors
  the connector is programming for managing this type of connection selected (you can write your own connector, there is a developer for him kit)
  and an entry door can be local or remote to a PeopleSoft system based on nodes who knows the bridge itself.

• Configuration of the network on New Installation

  We recently expanded our install ESX and now would like to implement vMotion with our vCenter Server. I'm just trying to wrap my head around a good network configuration. Each server vsphere has 8 shared between the 2 cards network cards. Here's what I thought where a config, I need just comments if this configuration is good or not:

  • 0 - Service Console (on LAN) interface

  • 1 - VM LAN Access (on LAN) interface

  • Interface 2 - iSCSI (on dedicated iSCSI Switch)

  • Interface 3 - VMKernel (on dedicated iSCSI Switch)

  This configuration duplicate the second NIC 4 ports for failover or load balancing. This configuration works, or what I have to do anything? I went through a lot of technical documents and that is the conclusion I came to, but I want to make sure I'm not in the wrong lane before getting everything that the installer.

  vCenter has no access to the iSCSI network unless it has an iSCSI HBA or you will use an initiator of the host of VC software to access its own iSCSI storage - I

  case of the vmotion netwrok that there not to ride on the same network segment iSCSI - it will be enough to find on its own isolated network segment.

  peut

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful