sensitivity to uneven pressure on different areas of the screen
Just upgraded my win8 x230t. After much trial and error, I finally got the pen to have very low pressure sensitivity by increasing the hardness of the tip of the stylus in full within the parameters of the stylus (Panel). But I don't know if it's pressure sensitivity. The problem now is that I get thin bright lines in the middle of the screen but dark and hard lines after the central region of the screen when you draw with the same pressure. And it's the same regions, even if I move the canvas. I have attatched a screenshot too. Would it be my screen or my scanner? I'm confused... Please help.
The lines on the attached picture is drawn with equal pressure.
It was the pen from the digitizer. I replaced it with a new pen and its good now. Thanks for your help...
Tags: ThinkPad Notebooks
Similar Questions
-
Original title:
warning by email
Got this e-mail with the subject attention!
Is - is this legitimate?
He wants me to press any key to continue
Thank you
Microsoft account Microsoft Security info We discovered the series of illegal attempts on your e-mail account of different areas of the intellectual property.It's for your own safety to continue to use your account, click on the button below.Continue Note: Please do not ignore this email to avoid your closed account Thank you The team Microsoft account Hello
Phishing scam.
Ignore!FYI
Microsoft usually has a green shield on the name of the sender.
This indicates that the e-mail coming from Microsoft / play the sender.
If, in case of doubt, please check your email to see if the Green Shield is there. ***
Phishing: Frequently asked questions
How can I Report Spam, Phishing or abusive messages in Outlook.com? -
I'm 7 days in LR to the trial. After creation and 'use' to develop to edit 6 catalogues, I find without changing this or that all catalogs when opening, now have a bright red nail in different areas of the photos in the catalog. Some of the catalogues have been created several days ago and were considered OK, but now this 'red' hue appeared in all the catalogues without any intervention by me.
I don't know why you create several different catalogs. Lightroom is managed much more efficiently using a single catalog. But regardless of this issue, it seems that if you have enabled clipping indicators. Pressing the J button makes the point high and indicators on shadow clipping or out of service. Or you can click on the small square in the upper corners of the histogram. Clicking the square to the left turns clipping shadow power. Clicking the square to the right will turn point highlight clipping power. I leave switched indicators so that I can identify areas that need to be adjusted so that I can eliminate all clipping.
-
The Firefox window is in full screen mode, the buttons are off the screen. I want to get out of
Full screen mode so I can resize the window myself. I am running Linux Mint cinnamonWhen you are in full screen view, move the mouse to the top of the screen to facilitate the bar bar appear Navigation and tab.
You can use one of them to exit full screen:- Click the expand (in the top right Navigation bar) button to exit full screen
- Click full screen in the '3-bar' button dropdown menu
- Right click on an empty space on a toolbar and select "exit full screen".
- Press the F11 key
Try to rename (or delete) the file xulstore.json in the Firefox profile folder.
You can use this button to go to the current Firefox profile folder:- Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
- http://KB.mozillazine.org/Profile_folder_-_Firefox
If you are currently using a version from the repositories of your distribution of Linux, try the official Mozilla Server version.
-
I am developing photos in lightroom. My photos are below the screen but the screen is lit in blue. I double click on an image to display and nothing happens. I can look in library mode, but not in the mode to develop. Can someone help me?
Hi pennym,
Please follow the steps below.
Open Lightroom
Go to Lightroom preferences in the Edit menu
Click the performance tab
Deselect the graphics processor
Restart Lightroom and try to use it
Let us know if that helps.
Kind regards
~ Mohit
-
Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.
Hello
Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.
Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.
Thank you
-
How to display multiple images when I hover over different areas with the function of mouse?
I worked on a flash Simulator to show what our product would look like twin rangefinder Expert. The idea is to fly over an area, or image and show the range or extent to which the object is to you.
I managed in the implementation with the following code below. However, I can't add several images "range" (or symbols) when I hover over a certain area. Can someone help me with the code? I looked for hours on the internet and I can't make it work. I'm new to Flash, but begins to learn as much as I can. Any help is appreciated! Thank you!
ActionScript 3:
img_nv. Mask = mask2_mc;
mask2_mc.buttonMode = true;
mask2_mc.addEventListener (MouseEvent.MOUSE_DOWN, onDown);
mask2_mc.addEventListener (MouseEvent.MOUSE_UP, onUp);
function onDown(e:MouseEvent):void {}
mask2_mc.StartDrag ();
}
function onUp(e:MouseEvent):void {}
mask2_mc.stopDrag ();
}
You can't have different functions with the same name. Back to my previous answer (4) where I talk about using the tables of information/data and event.currentTarget.name.
-
Selection tool sensitive to color in a limited area of the image
Hi all
For my work, I am interested in the measure of the area of pixel of the dark (black) in the sub picture, even the smallest. For less complex images, I used the magic wand and the selection tools to select my black areas and have Photoshop CC 2015 do measures on my selection. The problem with the image below that I have is that there are so many blackheads and they are scattered all over the image. Non-continuous the magic wand option unfortunately does not work for me in this case, because some of the dark spots have the same color as the other dark areas in the picture. So far, I only managed to make a good choice by selecting each point individually, which is a very tedious and somewhat subjective work. What I would like is a sort of quick selection tool with a tolerance as the magic wand option, so I can just fly over areas with small black to select tasks that these. I don't think that this is available in Photoshop, I'm looking for alternatives. That would also work for me, it is to have a way to limit the area that the magic wand tool selects objects of. For example, set a small area (as one of the white ice blocks) and then use the selection option discontinuous of the wand in this ice blocks so it will only select the dark stains on the ice block. If I can do this several times and combine the selections, I should be defined as well. Is it possible to achieve such a thing in Photoshop? In other words, what I would basically is the type of features in the background removal tool, but then make a selection in the foreground based on a color. All other ideas, suggestions, tips and tricks are also welcome! I hope my question is clear and that there is a solution for my problem. I'm very new to photoshop, so please be very clear in your answer, so I can understand every step .
Edit: I noticed that I posted this maybe in the wrong part of the forum (?), I was a bit in a hurry at work. My apologies. If there is no matter what mod around to place them in the right sub-forum, please do!
It works for you?
To see it in full screen, double click on the image.
1 use the curves to increase the contrast
2. place an empty layer below the image and fill it white
3. return to the top layer, click on the layer to bring up the layer Style
4. in the section mixture if move the top left right slider until the black dots you want are isolated.
Also, consider using this technique after the first change the mode to grayscale
-
Key challenges of chroma with areas of the screen no green images
Hi all
I have a small studio space, so when I have green screen, I always try to do shots I can't answer very well. The most recent example are these shots of my subject by behind. I move the camera more near the end of shooting.
As you can see in these images, I captured content beyond the borders of the green screen.
And I'm zooming, so before the end of shooting, it is looking like this:
No matter what I try (rotation of the pen, mask, Matt track tool) I can not understand how to deal with this photo. Roto pen doesn't let me keep green all about my topic. What I'm trying to expand the selection (roto border isn't clean - it is the cut in the edges all around):
.. .unhelpfully expands my selection completely to the edge of the screen. If I just disregard his right shoulder by millimeters, I get this:
This sequence is of course far from ideal, but I can't understand this. I spent hours trying different things without success.
All I'm trying to do is capture my subject with a bit of the green screen still around it, so I can remove that in a later step and have the images of the intact object with a transparent background.
If I'm following Matt up, the selected area becomes my background, instead of being always about me. It is a task in the form of subject from my background, lol.
Can anyone here feel sorry for this newb and guide me through what an expert can perform to process these images and crop the area of non-green screen images?
Thank you
Bill
Approach quite wrong. Before composing the images and inside the demo clip away anything outside the green screen using a mask base. Then try to extract a specific string based on the green (effects of use layers or the old base, Keylight not masking effects!) and refine the result using other effects, then apply it as a cache.
Mylenium
-
Why the window headers cannot be put out in the area of the screen?
In windows 8 when you attempt to drag a header of the window outside the upper part of the screen, the header snaps back to the top of the screen.
Can I disable this? Its not really useful and actively prevent the use of the complete workspace.
And how can I disable the function that is causing windows that are moved to the top of the screen to go full screen?
And how can I disable the function that decides that the window should be attributed half of the workspace when its being dragged and the cursor touches the perimeter of the workspace?
Indeed, how can I disable all the behaviors of auto sizing of the windows?
Hello
I suggest you try the following steps for the automatic resizing of the window
a. press the Windows key + C, in the type of easysearch, and then click accessibility.
b. scroll down a bit, then click on make the mouse easier to use.
c. scroll down and check the box last in this window: prevent windows from being automatically arranged when moved to the edge of the screen.
d. click OK and you're done!See the short form for more information.
I hope this helps.
-
Fill area of the screen with the first value in the record group
Hi guys, what the title essentially says. I have a display element that is populated by the by selecting the appropriate option in a LOV. Is there a method that I can put in when a new instance of the form or something else to fill the screen with the first item in the record group used to fill the lov to ensure when the load form display area is not empty. I know I have to hard just in code, but I would have the value come from the record group.
Thank you
Published by: user13390506 on August 25, 2010 05:39This works very well for me:
Created a record group (RG1) with the following order of selection:
select table_name, table_name from user_tables order by 1
Created a button on the Web that are running the following:
PROCEDURE pop IS rg_id RecordGroup; gc_id GroupColumn; col_val VARCHAR2(1000); n number ; BEGIN rg_id := Find_Group( 'rg1' ); IF Id_Null(rg_id) THEN Message('Record Group rg1 does not exist.'); RAISE form_trigger_failure; END IF; n := Populate_Group( rg_id) ; gc_id := Find_Column( 'RG1.TABLE_NAME' ); IF Not Id_Null(gc_id) THEN col_val := GET_GROUP_CHAR_CELL( gc_id, 1 ); message(col_val); End if ; End;
I guess the record_name.column_name at the top of case...
François
-
Rub the different areas of the timeline.
It is a branch of a thread earlier here: http://forums.adobe.com/message/4752554#4752554#4752554 thank you very much for this provision for me to use.
In the thread, a way was created to rub through a chronology of edge. I was wondering, is there a way to rub through five different symbol animations? I have five objects lined up left to right, and when you touch one it scales full screen and begins the animation of the object. You can rub the video back for each separately. I'm just starting to understand what each part of the code. I can make it work with an animation, but I couldn't get it to each of the five again.
Also, some small things. Is it possible to do the brushing machine automatically lower the bar as the symbol plays from the beginning? At present it remains motionless until I touch, I can rub.
Thank you
Jackson
Hey Jacksonean, yep - to make the entire scene of the "scrub area', you can add a touchmove event to the scene and add code to track the position of touch as in the example below and pass this value to a func"onSwipe"on stage.
Code Stage.touchmove:
e.preventDefault ();
If (e.pageX == undefined) {}
touch var = e.originalEvent.touches [0] | e.originalEvent.changedTouches [0];
moving touch position for "onSwipe" func
sym.getComposition () .getStage () .onSwipe (touch.pageX);
}
Code Stage.compositionReady:
sym.animScrubPosition;
sym.scrollThumbXPos;
sym.stageWidth = sym.$('Stage').width ();
sym.animTimelineLength = 4000; / / 4000ms
sym.onSwipe = function (pos)
{
sym.scrollThumbXPos = pos;
scrub with the corresponding framework of anim
sym.getSymbol('container').stop (sym.getScrubPos ());
}
sym.getScrubPos = function()
{
this.scrollThumbXOffsetPos = sym.scrollThumbXPos - this.scrollThumbXPosMin;
sym.animScrubPosition = (sym.scrollThumbXPos/sym.stageWidth) * sym.animTimelineLength;
Return sym.animScrubPosition;
}
Example (this test was another user, but you should be able to take advantage of your use case):
www.timjaramillo.com/code/Edge/swipe_v5/test.html
Source:
www.timjaramillo.com/code/Edge/_source/swipe_example_v5.zip
-
It would be useful to not type the text of your message in the subject line, as it is cut.
If by effect of brush, you hear the Red areas, it is due for making salient clipping on to the right of the histogram. Click again, and it will turn off. You also have shadow clipping (pure black) WARNING on top left of the histogram that would show blue then disable that, too, unless he's intentionally.
If you mean something else indeed brush then please describe specifically what you mean.
-
Different value for the element on the page on different areas on the same page?
Hi all:
I use APEX 4.0.6 and I have a page with 4 regions and each of the region shows a classic report which SQL is very similar to the other:
for example
For region 1, the SQL looks like select * from history where status = 'A ';
For region 2, the SQL looks like select * from history where status = 'B ';.
For region 3, the SQL looks like select * from history where status = 'C ';
For region 4, SQL looks like select * from history where status = ';
To optimize database performance, I like to create a page element called p_status_value on this page and using the syntax of following link for the SQL statement for all 4 regions:
Select * from history where status =: p_status_value;
However, I need this page element value is dynamically change for each region:
For region 1, p_status_value = "A";
For region 2, p_status_value = 'B ';.
For region 3, p_status_value = 'C ';
For region 4, p_status_value = ';
Also, I need hide this element of the page on this page.
Can someone show me how to do this?
Thanks in advance!
Kevin
Published by: Kevin Zhang on May 10, 2011 13:03Then I would have 4 regions, with each region report, create a box item in each area, called PXX_REGION_VALUE and then your request is:
select * from history where status = :PXX_status_value_X; (XX for page # and X for region #).. The database engine will crunch through the query and your dashboard will work fine.. Thank you, Tony Miller Webster, TX If vegetable oil is made of vegetables, what is baby oil made of? If this question is answered, please mark the thread as closed and assign points where earned..
-
Pass values between different areas on the same page.
Hi guys!
I'm developing a simple application where we have the list of students. I'm displaying information on a separate page for each student. Do you have any idea how and if I can pass parameters between regions, on the same page? I have a view showing, student card name information etc, and I want to create another view on the same page, which will be the student and will return a list of its subscribed courses.
Part of my database is something like this:
-------------
Students
------------
ID (PK)
------------
-----------------------
Student_course
-----------------------
ID (PK)
Student_id (FK)
Course_id (FK)
----------------------
----------------
Course
----------------
ID (PK)
You have no idea how this can be done? I found information how to pass parameters between pages, but not on the same page.
Thanks in advance!
P.S. I am using the Application Express (declarative programming via a web browser), the use of the Application Builder.
I discovered that I really had to. I just had to replace the "1" in my sql query with: P9_STUDENT_ID
Thanks for your help anyway!
Maybe you are looking for
-
I know it's a long question/suggestion, but I wanted to give my use case. I have an iPad 2 Air right now, that I use for personal work content and limited content is mainly. I'm certainly interested to go to the Pro 12.9 inches because it has a lot m
-
How do I close the last tab when restore last session setting is turned on?
There are times, when I have several tabs open at the same time, when I want to turn off the computer and would like to see these tabs next time when I run Firefox.However sometimes also would like to be able to close the last tab and with that 1) cl
-
Hi, I can not add Foxtrick, GT-i9003
Comrades, please help, I can't download (add) for my Samsung GT-i9003 Foxtrick, android 2.2
-
Tecra Z50 is not connecting to WiFi
Hi guys We recently sold a customer a Z50 toshiba ultrabook and major problems with the wireless. We find it scrambling to pick up some wireless access point they main ap we have problems with is a standard B/G wireless ap with wpa2 encryption. The l
-
This coat of arms appears in some not all icons icons