Separate account manager and employees

Similar Questions

• producer iTunes tells me my account is attached to several suppliers of itunes and I have to create separate accounts to log on. What does that mean?

  When I am trying to connect to Itunes producer to present my book on ibooks, it tells me that my account is attached to several suppliers of itunes and I need to create separate accounts to log on. What does that mean? Can anyone help? Thank you!

  In the FAQ:

  

  http://www.Apple.com/iTunes/working-iTunes/sell-content/books/book-FAQ.htm l

• My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  My wife and I have iPhone 5 s, the two rings at the same time while we are at home when one of us Gets a call. They are on the same account, is there a way to stop this without establishing separate accounts?

  settings - phone - call another device - off.

  One of you should get their own apple ID, you just go to have problems later.

• I get a notice that my subscription will expire soon.  I click on "Subscription manager" and go to my account, but I can't find ANYTHING on how to pay renew my subscription.  Where is the membership Manager?

  I get a notice that my subscription will expire soon.  I click on "Subscription manager" and go to my account, but I can't find ANYTHING on how to pay renew my subscription.  Where is the membership Manager?

  Hi Ruth,.

  Please see manage your creative cloud membership

  Hope that helps!

  Kind regards

  Sheena

• Return managers and employees who report to a Manager

  Hi all
  I need your help in what follows by using the query log by:
  
  I have 2 tabels
  Tabel_1
  
  Hierarchy of the Department
  
  department_id parent_department_id has_manager
  1 X NULL
  2 1
  3 1 X
  4 2 X
  5 4
  
  
  tabel_2
  
  emp_id department_id is_manager
  1 1 X
  2 1
  1 of 3
  4 2
  5 2
  6 4 X
  4 of 7
  8 4
  9 3 X
  10 5 X
  now in my business, the concept of direct employees is as follows:
  
  My direct employees are: employees in my Department + only the Manager in the Department, and below me in the hierarchy.
  
  If the Department below me has no managing these employees in this Department reports to me
  Then we check the lower service and so on until we find a manger then this report manager for me but its employees it so they are not my direct employees
  
  for the example above should be as follows
  
  If I want to get direct employees of emp_id = 1
  
  then it results in
  2
  3
  4
  5
  6
  9
  
  
  Best regards
  Ibrahim

  Hello

  Here is another way, which I think is better because it's easier to understand:

  WITH     my_departments     AS
  (
       SELECT     department_id
       ,     LEVEL          AS lvl
       ,     has_manager
       FROM     department
       START WITH     department_id     = (
                                       SELECT  department_id
                                 FROM    emp
                                 WHERE   emp_id       = 1     -- Parameter
                                 AND     is_manager  = 'X'
                             )
       CONNECT BY     parent_department_id     = PRIOR department_id
            AND     (  PRIOR  has_manager          IS NULL
                 OR LEVEL                 <= 2
                 )
  )
  SELECT     e.emp_id
  FROM     my_departments  d
  JOIN     emp          e  ON   d.department_id  = e.department_id
  WHERE     (    d.lvl        = 1
       AND  e.is_manager  IS NULL
       )
  OR     (    lvl        > 1
       AND  (   d.has_manager IS NULL
            OR      e.is_manager  = 'X'
            )
       )
  ;
  

  It will also, probably more effective, though, unless the departments table is really big, it is perhaps hard to notice. CONNECT BY subquery in the previous message always scanned the entire table and then rejected some departments in the WHERE clause. This CONNECT BY in this query gets only the nodes, it needs and no more.

• How to make a new account the standard and standard account manager account is on parental controls.

  first of all Hi there.

  I have windows 7 and I put a parental account for my kids but the big mistake I did there is no administrator account on my laptop.
  Now, every time I do anything it's parental control and I can not even a new account administrator due to parental account.
  so please unraveling me is the way to make a new administrator account by account standard and parental settings on the standard account.

  When you have loaded Windows for the first time, then you have been invited for an account name and a password. This account is an administrator account. You must now use it when creating new accounts.

• Regarding FDMEE 11.1.2.3 mapping to the reconciliation of accounts manager

  Hello Experts,

  I need your help to explain the 11.1.2.3 FDMEE mapping of concepts at the request of ARMS (reconciliation account manager). ARM part of Hyperion Financial close management (FCM).

  I use Windows 2008 R2 as operating system.

  I understand that the data flow source to a staging table in FDMEE, then the staging table for ARM target application.

  But I need to know how to perform the mappings for these 2 steps.

  First of all, my source is GL file containing members of following in the format below:

  Company, account, amount, Code currency

  Now how I will interpret mapping for this under "Import Format" option and going under the "profile"? I have attached the screen shot for the same thing.

  Further, there is no separate dimensions of society and counts in the ARMS and the dimension exists with the name 'Account ID' have company-account concatenated by '-' sign.

  Now for this card, I'm going under "Application" and see that four mappings are pre-defined. Now how I map the staging table with ARMS? I have attached the screen shot for the same thing.

  Further, How to load data using "Workbench load data"?

  Need your help by performing these steps .

  I would appreciate if I can get any document to carry out the necessary procedures.

  Thank you

  Sumit

  Hello

  I have

  I suggest that you take a look at the following supporting documentation

  ID:1574080.1

  ID:1583429.1

  ID:1584133.1

  I hope that helps

  Akafdmee.blogspot.com

• Replace .mac account shared with iCloud separate accounts.

  Hello

  I'm looking for advice on how best to clean up the mess created by our continued use of our ancient .mac account.

  My wife and I have had an account .mac since 2005.  Our e-mail addresses are aliases that are associated with this account.  It's messy.

  My wife and I would like to have separate accounts .icloud but, if possible, do not want to give up e-mail addresses that we had for 11 years.  Is this possible?  We also want to make the transition without complicating our existing .mac account settings. For example, our children now have their own accounts of .icloud that are related to the original address of .mac as part of a family sharing.

  Thank you!

  Ben

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• The pool management and quality Service

  I've had problems with HP for over 2 years now. The first laptop, they have replaced and gave me a 8570p Elitebook that they new was not good and gave to a member of the family of the same model. I have had problems with it, run hot and fingerprints from December 2013 and open a file. Tech was released in January and replaces fan and then the numeric keypad now works sometimes. Tech said needed to order parts most never heard talk about him again. They sent an email saying they have closed the case without being fixed pc. I called and had another one opened and got a case manager very rude who called and chatted with me for two days telling me he would give me a same unit renovated, it take or leave. He told me that nobody will do better than that even though I have the extended warranty and care Pak. I told her no but my family members had problems and did not have all of the warranty and they gave him a new one as a replacement for 8770w. I continued to try to work with tech and they will call him each week saying that they have an appointment and no one does or call. Mind you, this has happened since December 2012 and it is the end of February 2014 and my pc has not yet been set. I work from my pc as a business and may not have that going. Then they tell me that we cannot replace because it was given to you in 2011 and I have documentation I received in 2012 at HP and they don't judge. They say it's still too old. It's not my fault for your product. I was treated very brutally and been put on hold and they are standing by their product. I'm not recommending them or buy from them. They have these foreign people who do not in any ways whatsoever and they call it management and customer service. HP is not going to pay my salary is their pc as a last shutsdown I did. If you can replace it for one person, then you must replace for all.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Your best course of action is to contact the official HP customer support via Contact HP - United States of America to the United States or Contact HP - worldwide in the rest of the world.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I want to do a system restore. Then he tells me to make sure I'm connected an account manager.

  I want to do a system restore. Then he tells me to make sure I'm connected an account manager. So, I check and I am logged on this path. Then I try to start the restore and then told me that system restore is disabled by group policy. To turn on, I need to contact my estate Administator. I have no idea what the * is to group policy or a domain administrator. Can someone help me please?

  "Group Policy" would tend to indicate that you're under XP Pro.

  Given that starts the "Group Policy Editor": (XP Home does not have Group Policy Editor)
  Start-> Run-> "gpedit.msc".

  Navigate to:
  Computer configuration-> administrative templates-> system-> system restore

  Look in the window on the right and make sure that 'disable them system restore' and 'Turn off Configuration' is on "not configured".  If not, double-click on them and their defined this way.

  HTH,
  JW

• Isass.EXE - Security Accounts Manager initialization failed OXC0000001 to start Windows XP

  Original title: Isass. EXE-SYSTEM ERROR MESSAGE IS ON AN ANOTHER COMPUTER & WON "T START.

  This is the error message when I turn on computer ISASS. EXE-system error Security Accounts Manager... Intialzation failed due to the following error: a device attached to the system is not fuctioning - OXC0000001 error status

  Jacqui T Hi,.

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  This problem may occur if the file Security Accounts Manager (SAM) is damaged or missing.

  Step 1: You can follow the steps mentioned in the article below

  Error message "Security Accounts Manager initialization failed" when you start Windows XP

  http://support.Microsoft.com/kb/316751

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Than k you

  The user has clicked on Vista, the little lock at the bottom of the START window.

  Somehow, I blocked my user account (login) and I tried to help but can't find any info. How to UNLOCK the user account. Thank you

  Hello

  Click the account icon that was locked and enter the password IF you know and otherwise:

  Try Safe Mode - several times, press F8 that you start. The Admin account there is no default password
  so unless someone has changed, you should have access there. Then Control Panel - accounts - users
  Manage another account - use this down your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  If no joy Mode without failure:

  Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  ---------------------------------------------------------

  If necessary:

  Ophcrack is a free Windows password cracker based on rainbow tables.
  http://Ophcrack.sourceforge.NET/

  How to reset a Windows Vista - Trinity Rescue Kit method - password password reset disc - burn the ISO
  http://www.WikiHow.com/reset-a-Windows-Vista-password
  YouTube video on the use of the Trinity rescue Kit
  http://www.YouTube.com/results?search_query=Trinity+rescue+Kit&search_type=&AQ=f

  Reset your forgotten password the easy way using the Ultimate Boot CD for Windows
  http://www.howtogeek.com/HOWTO/Windows-Vista/reset-your-forgotten-password-the-easy-way-using-the-ultimate-boot-CD-for-Windows/

  Offline NT Password & Reset Editor
  http://home.eunet.no/~pnordahl/ntpasswd/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I have a duplicate of 1 user account name and Public on my 'C' drive If I change a file/folder in either the changes occur in both.

  'Duplicate disks c' Vista

  HI - confuse problem I have a duplicate of 1 user account name and Public on my 'C' drive If I change a file/folder in either the changes occur in both.  Using WIndows Vista (Home Premium) & 4 GB of memory. How can I delete a duplicate account name of the user account and the Public safe?

  Menu of following simplified file structure (and I hope it is displayed properly):

  Thanks a lot for the help coming! John L.

  (My) desktop

  The user account name

  Public

  Computer-

  Floppy (A)

  C Drive (C)

  Users

  Administrator

  The user account name

  Public

  (D) recovery

  Ligthscribe-RW drive (E).

  |

  |

  Network

  Hello

  I suggest you to follow these steps and check if that helps:

  1. Click Start.
  2. Right-click on computer and click on manage.
  3. Click local users and groups, click users.
  4. Right-click on the user account and click on delete.

  It will be useful.

• All .exe files go to the Download Manager and ask if you want to run or save

  Suddenly my pc win 7 cannot run .exe files.  When it starts, I get several windows asking me if I want to run or save each of the boot files.  When I click on an icon for an application, I get the same thing.  If I click on for example a Word document file, Word opens very well, but I can't not all .exe files to run directly.  Even if I go to the Task Manager and click on "new task" and try and invoke Notepad - for example "do you want to run or save.  Even if I go to the control panel and ask search and solve problems - "do you want to run or save rundll32.exe"... Ditto for chkdsk and even for antivirus scanners or malicious software.  All the solutions I can find here seem to imply somehow running a .exe program to diagnose / fix and that's exactly what I can't do.  If you click on "run" in the download dialog there is an attempt to open a window, and then you're right to "do you want to run or save" the same .exe program.  Programs that save files still work all their saved files, it seems a simpler problem rather than a massive corruption.  Yet Labour Office associations, such as the 'open with' for example image files.  Any ideas before you give up and reinstall Windows?  Thank you very much!

  Any ideas before you give up and reinstall Windows?

  -> A a more effective and less painful method would go like this:

  1. keep tapping F8 during the first phase of startup.
  2. select Repair from the menu.
  3. Select an administrator account, and then enter its password.
  4. When you are prompted, select System Restore.
  5. set Windows to a point before this problem occurred.

• Associated account manager SmartNet contract to know

  Hello world

  I'm new to SmartNet contracts, I came to know that each SmartNet contract is associated with an account manager. How can I find the details of the account manager. Who should I contact.

  Kind regards

  ABY Laurance claudon

  This is not the case.  It may or may not have an allocated SAMT.

  I'm just trying to associate with your CCO profile and see what happens.