separate emails in the email component

Similar Questions

• I can rearrange the email component and seen to be side by side rather than stacked?

  I can rearrange the email component and seen to be side by side rather than stacked?

  What does that mean?

• Could not find the ColdFusion component or interface

  I get an error 'Could not find the ColdFusion component or interface' when I try to call CF feed or http methods, for example:

  localtest.httpService = new http();

  Results in the error, 'Cold not find the ColdFusion component or interface http'

  I have two CF 9 instances that are running on the same machine (Windows Server 2008), both running the latest patch (patch 2). The two cases raise the same error. I have another separate server running CF 9 (does not have the hotfix 2 installed) and it can run code very well. I guess feed() and http() are defined in an Adobe ColdFusion cfc in the CFIDE directory somewhere, but I don't know which because they are encrypted.

  When you say "mapped" do you mean "with a CF mapping? If Yes, what is the mapping and where?

  On my install CF9, I've got a custom tag path defined, that points to the cfusion/customTags directory, which in turn contains the com/adobe/coldfusion dir, which is where the CFC is. It's the out-of-the-box config.

  Due to the track being defined custom tag, all files within this subdirectory structure can be treated without any other path, such as:

  new http()

  A mapping to CFIDE won't help you, because the files are not in the dir of CFIDE. And even then, say you had a map to cfusion/customtags called "/ foo", you would need the path access to the CFCS in your code:

  new foo.com.adobe.coldfusion.http)

  (or have an import statement that precedes the new statement)

  --

  Adam

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• Write in separate cells on the worksheet

  Hi people.

  I write in the attached VI time and amplitude of the signal to a worksheet. The problem is that they are in the same cell. I used a tab delimiter, but that will not separate them. The lines are fine but I two colomns time and amplitude. As you can see below, they are in the same cell. How can you separate them?

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  0.000000 0.068000

  0.068000 0,002000

  0.072000 0,004000

  0.068000 0,006000

  0.068000 0,008000

  Thank you

  Select this option.

  I think that works, maybe it's just how you open the file. If you open in Excel, because it includes a CSV extension, it will be considered as having the comma separators and so you can see everything in a single cell. If you give him a TXT extension and then open that in Excel, it will treat it as tab delimited and opens properly.

• How can I measure the continuous component of the tension a SMU-4496 with LabView

  Hello

  I use an SMU-1073 NI with an SMU-4496 for several applications. In one of them, I would need the blood, maintain the continuous component (this is an accelemeter of MEMS). It's standing vertical, it gives, for example, + 2V and I need to keep reading this almost constant value.

  However, with the DAQ Assistant in LabView, it seems that it only reads the component changing signal, as is it doesn´t to move, it reads almost 0. If it moves, the, the DAQ system takes the change but then returns to zero.

  Is this normal? Read the constant part of the signal?

  (I'm a mechanical engineer and I'm not at all an expert in acquisition of signals or data, so probably just something basic is missing me)

  I have attached an example in which, after a change, it goes back to zero and the configuration in the DAQ assistant

  Thank you

  AC coupling is the culprit-it allows to block all components of steady state DC.

  -AK2DM

• Can I run two separate versions of the LabVIEW Run - Time Engine on a PC?

  Hello, I am curious to know if anyone knew if it is possible to install and use the two separate versions of the LabVIEW Run-Time Engine on a PC?  I have currently 2009 runtime engine installed on a machine, and I wanted to install the runtime for 2011 as well. I know that you can run two separate versions of the LabVIEW program on the same machine, but what about the Run-Time Engine?

  Thank you!

  No problem at all. I currently have the engines of execution for 8.2, 8.6, 2009, 2010 and 2011 on my computer. Multiples are no problem at all. Go ahead and load.

  Rob

• Take the real component of the logarithms of negative numbers

  I'm taking the log of a number, and I need the real component. For example: log(-5) = 0.698970004 + 1.36437635 i

  I have to be able to take the 0.698970004 and use it, while just Labview says his NAN.

  I just figured as a CPD, I can throw the entries, but then I still don't know how to convert with only the real component.

  Ideas?

  Thank you

  The trick is to define the representation of the data type of the lap number in the primitive logarithm. After that, it is easy to divide the complex number in real and imaginary components:

  

• How to get the ActiveX component value change event?

  Hi all

  LV 8.6.1

  I try to get the ActiveX component value change event. I covered forum and through examples, but I can't get an idea of how "Recalling vi. For example, in the example 'ActiveX event Callback for IE.vi' it is used "recall vi". I've added an example where the change event of value with the mouse to the bottom of the event are scheduled to the structure of the event. Mouse down event OK work but change the value no. Can anyone describe what I need to add to my example vi who value the change event works fine?

  BR, Jim

  Here is the solution! "Value changed event" is not performed in the structure of the event, but in "Reminder VI".

• How can Windows Vista - windows mail - I separate list of the messages in the preview pane. When I open windows mail I just want to see the list of messages.

  Hello:

  How can Windows Vista - windows mail - I separate list of the messages in the preview pane. When I open windows mail I just want to see the list of messages.

  now I'm seening messages and preview list in the same window w / a separator between list pane and preview of the message.

  Ty

  View | Layout and uncheck the preview pane. You can also set the preview pane button in the toolbar if you wish.

• Windows Installer cannot find the Destination component

  After wash starts the Windows Installer window if poster once finished top of desktop. The process takes about a minute. Windows Installer message is, "Preparation for installation." Then, the Destination component appears with message "Please wait while Windows configures the destination component", and shows the progress bar. Then, the Destination component window appears with the message, "an installation package to the Destination of the product component is not found. Try the installation again using a valid copy of the installation package, "Destination. msi´."

  This package is not in my computer. This happens everytime I turn on the computer. The whole process is very long. How can I fix it so that the message?

  Thank you for your help.

  Hi lmcrae,

  Put your computer in a clean boot configuration to determine which product is responsible for this. Clean boot is a way convenient, safer to change the options for startup in the registry; You can turn individual items or disable freely to try various combinations up to that narrow you the problem. Once you find out, post details about the same so that we can take additional measures.

  Please see this article for detailed information on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Ensure that you switch your computer to normal startup mode after completing the troubleshooting steps. Steps are available in the article above.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to specify the JRE (component Pack)

  When I created my project, he asked me what JRE to use and I said 4.6.  Now, I want to change to 4.5 (and change to my taste and so forth).  When I go to "Windows-> preferences-> Java-> Installed JREs", I can see all the components, as I should, and I can choose what I want, which makes it the default for newly created projects.  When I right click on my project and go to 'Properties-> Blackberry project-> View/Edit Application Descriptor', there are all my JREs (and so I guess these are the component packs) under the heading "Preprocessor Directives", which doesn't seem to have anything to do with JRE or component.  In addition, they are all greyed out and I can't select another than one marked 'BlackBerrySDK4.6.0', even if I can see all others grayed.

  I'm in the right place to change the JRE/component Pack I want to build for and, if so, how do the selections not gray?

  Or, if not, is there a file I can edit somewhere that tells what JRE to use Eclipse/Blackberry?

  Thank you

  Allen

  You should see JRE System Library in your project in your package Explorer.

  Right-click it, and then click Properties to change your target OS.

  The preprocessor directives change each time you change the JRE to use preprocessor to strip the code that is not compatible with a certain operating system.

• Director of Windows won't start; How to fix error: "component identity found in manifest does not match the identity of the requested component»

  Whenever I try to start Windows Movie Maker, I get the following error:

  "Sorry, cannot start Windows movie maker. Make sure your satisfied computer minimum system requirements before you try to start the Movie Maker and then try to update the driver for your video card if Movie Maker does not start".

  I know that my computer meets the minimum system requirements because it came with the whole package. I've also updated my video driver correctly several times. I even uninstalled Movie Maker, re-installed. Even uninstalled the complete set of Windows Live and re-installed, but it still does not work. After a lot of searching for answers, I found the event log in which this error:

  «Activation context generation failed for "C:\Program Files (x 86) \Windows Gallery\MovieMaker.Exe".» Manifest error or policy of the folder "C:\Program Files (x 86)" \Windows Live\Photo Gallery\WLMFDS. "." DLL"on line 8. Component identity found in manifest does not match the identity of the requested component. Reference is WLMFDS, processorArchitecture = "AMD64", type = "win32", version = "1.0.0.1". Definition is WLMFDS, processorArchitecture = "x 86", type = "win32", version = "1.0.0.1". Use sxstrace.exe for detailed diagnosis. »

  I don't know, but I think it's causing my movie maker does not start. I looked around even more of an answer to this question on how to resolve this error, and I couldn't find anything so far. Microsoft support said that I have nothing to do and it will solve automatically. Alas, I got this error whenever I tried to open Movie Maker (the time is equal to the time I tried to open it).

  What can I do to fix this?

  Thanks in advance.

  Hello JurrianH,

  You can go ahead and post in the forums alive in dealing with the problem with Live Movie Maker specifically. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• How to replace filtering engine based on the Windows Component?

  HI - how to replace filtering engine based on the Windows Component?

  See the link below.   This fix is well worth trying, but if your system has been damaged by malicious programs such as Sirefef there may be more issues involved.

  blogs.technet.com/b/asiasupp/archive/2011/12/27/error-code-0x80070424-with-Windows-Firewall-and-quot-base-filtering-engine-service-quot-not-available-in-services-database-list.aspx

• Properties of the dynamic component using the EL Expressions

  Hi, first I use JDeveloper 11.1.1.6.

  To better explain my problem, I think the best is to expose my use case.

  So, I have a form with hundreds of components and I have a page before the form to select an option, and depending on the option chosen, different shape components are shown to the user. It's all configured in a DB Table. For example: each record db has the id compoennt and some properties like requires it, people with disabilities, visible, etc. If I want to put a component is not visible, that I just have to call setVisible on component whose value to false. So, so far, no problems, everything works fine.

  But I have another requirement that gives me problems. Some components are dependent on others. Let me give you an example:

  • When I select option A (in the previous menu) the X-component is necessary if the component is set to 1;
  • When I select the option B (in the previous menu) the X-component is necessary if the Z component has a value of 1;

  You are probably thinking, "well, you can do this with EL Expression" and I agree. I can do but so far I couldn't do it directly on the properties of the component. But I want to keep all configs in the comic book (it is easier for the customer keep the components on the form.) Tomorrow, that he might want to change the component that x be required only when W element is set to 1.)

  So my question is, can I ask an EL Expression programatically real estate one component?

  Hi, has solved the problem.

  Leave the solution for future users with the same issue here:

  	String [] partialTriggerComps = r.getRequiredIfComponents () m:System.NET.SocketAddress.ToString (.split(";"));
  	String expression = r.getRequiredIfExpression (m:System.NET.SocketAddress.ToString ());
  	comp.setValueExpression ('compulsory', ADFUtils.getValueExpression (expression, Boolean.class));
  	comp.setPartialTriggers (partialTriggerComps);

• Connect a list to the bridge component

  Hello

  I have a question how can I connect a list element of bridge and the bridge component to select a button.

  Please tell me the solution for this.

  Thank you

  Hello Mohit,

  I think that I undestand what you're trying to do. I wrote a sample for you. You can download it here. This application of the MAF were developed under JDeveloper and MAF 2.1.3.

  It will be useful.