HP color laserjet 4500n post installation problem. not print!

Similar Questions

• installed hp Color LaserJet CM1312 nfi MFP does not print

  Our print has been installed several times and uninstalled but no impression goes out. Printing is preparing, and Microsoft Word gets stuck while printing. Our software is Vista.

  Please let us know what can do with her w

  Download the latest drivers, software and firmware (make sure you get everything) for your printer and your version of Vista on the HP site (do not use the didk supplied with the printer and do NOT use anythinng of Windows Updates.

  Here' year HP article on how to add printers to Vista. http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=115&prodSeriesId=3558902&prodTypeId=18972&prodSeriesId=3558902&ObjectID=c00784183 Did you follow the instructions as written in order to present th?  Otherwise, reinstall the printer (actually, reinstall iin anyway just to make sure it's done).  I suggest that you do so with technical Suport HP on the phone with you http://h50203.www5.hp.com/hpisweb/customer/HPInstantsupport.aspx?&cc=us&lang=en.

  Here's a page on the HP site dedicated to your printer. http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3558902&submit.y=6&submit.x=12&lang=en&cc=us, you will find a useful part it.

  They also have a forum like this for their products at: http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 where you can ask these questions and get responses from people who know the printer.  I'd give it a try - they can offer a solution person considered otherwise.

  I hope this helps.  Keep me in the loop.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can I solve the problems of alignment is to have my Color LaserJet CP1518ni? Red will not line up.

  Can I solve the problems of alignment is to have my Color LaserJet CP1518ni?  Red do not line up, I installed the latest updates, etc.  Calibration does not help.  The printer is only a few years old.  What gives?

  Hi threre, I just work on HP CP1518ni a client with this same alignment problem as most of you are describing. I went through some process and I think I found one that works... If all goes well it will work for

  You too.

  Things I tried before hand... also this machine has all the toners brand HP 90 + life on each of them.

  -Calibrate - has not fixed the problem (tried once)

  -reset the NVRAM - did not problem

  -removed and inspected print cartrides (no problem found), re-installed - fixed no problem

  The 'fix '...

  First, go to the HP website and download the firmware, make sure you only select the right operating system

  you are using. (for me it was Windows XP) Also the requirements of course read, I think you have to

  have with XP SP2 if it perhaps questions, always read the instructions before doing the firmware.

  Here is a quick link to the CP1518ni...

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3422472 & LC = on & CC = US & DLC = in & lang = to & CC = US

  Then, assuming you have the appropriate printer driver installed, double-click the utility you just downloaded and select the CP1518ni from the drop-down list. Now, press the button 'send the firmware '. It will be

  Take a few minutes so just let it do its thing. After that she did try to print something, for me it was NOT fixed.

  Now you want to calibrate the device, maybe 2 or 3 times, on the control panel scroll to the right until

  you see "systemsetup" press ok and scroll to the right again until you see 'print quality' and press ok.

  the first item in this menu is press "calibrate color" ok, now he's going to say 'calibrate now' and press ok one

  last time. It will start the calibration process. Then he did print something new to see how he does.

  for me I had to do the calibration process twice before the quality was normal again.

  Good luck, hope this helps some, I read that some printers still presist even after this process.

• HP LaserJet MFP M127fw Pro do not print

  Just bought a M127fw of MFP HP LaserJet Pro and is about to return it for a refund.

  While it will print a diagnostics page and the copier seems to work, it will not display a wireless information page, and I can't seem to print a document from my PC, phone, ePrint or any other method.

  I tried to print the information page of the front panel of the printer as well as the web server.  In both cases, clicking the button simply does nothing.  The printer displays no message indicating a problem.

  I have connected the printer to my Ubuntu PC (tried JetDirect/AppSocket and IPP), but the print job hangs just with "treatment" or "stopped".

  I have connected the printer to my Android phone, but just printing crashes.

  I have connected the printer to service of HP ePrint (using the email address listed by my printer).  Here it shows 'Problem with printer', which is my only indication that something is wrong.  The site directs me to check the front panel of the printer for more information, but there is nothing there.

  I don't know what else to try here.

  Resolved in this post: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/HP-LaserJet-Pro-MFP-M127fw-will-not-print-anything-except/m-p/3836740/highlight/false#M52766

• Color Laserjet PRO MFPF 377dw: problem with Color Laserjet PRO MFPF 377dw and HP network scanner

  After removing the package of printer drivers HP, all attempts of resettlement via WLAN regularly fail before the end, which indicates that the device is not found. I physically connect the printer to the computer by USB cable to install the software successfully. When I go to WLAN Wireless thereafter, the printer works perfectly within the network. If I remove the USB cable, the following error message appears when I try to start scanning HP: HP CLJM377 Scan found . In other words, HP Scan cannot be used with a PC not connected by USB cable. All other remote features function normally printer in wireless, including HP Scan & Capture. Is there a possibility to correct this, via the Windows registry from my PC?

  MrRobot wrote:
  

  Hello! @Chirsistei, your description of the HP product is classified as a commercial product (business). Our sales support team provides support via the channel of entry here. If you need immediate assistance, you will need to open a session one business with our sales support team. Click on this link http://ow.ly/I3gw30140F8 for more details.
  Let me know if you want more information and/or assistance.

  Have a great day!

  See you soon!

  Hello Chetan,

  I think I'm in the wrong forum here because I live in Switzerland and here the Laserjet Pro M377dw color is sold to private users. I have no access to a support plan and use the printer in my home office network. Your proposed solution therefore does not help me, during this time, I have posted this problem in the forum on language German you need not to pursue this new. Thanks anyway

• HP Color LaserJet MFP M277 Pro: Problem in black with print on the right side of the paper on a HP Color LaserJet Pro M277dw MFP

  When I print a page of text or an image to be in color or black and white about 1.5 inches on the right side of the page, the black part is dimmed.  I tried to shake the black toner, but nothing has changed...  Should I replace the black toner?

  Hey @candreas,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing faded on the side of your impressions of your printer Laserjet M277dw range. I can help you with that.

  To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once completed, this document describes How to solve print quality problems with your printer.

  If after following the above, are you always see fainted to prints, either the cartridge or the printer needs to be replaced. You can contact the HP Support by clicking here and filling out the form below.

  Please let me know the results after following the above. If you are able to improve the print quality or to reach a resolution with the support, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Color LaserJet MFP M177 Pro: Problems of analysis between iMac and HP Color LaserJet Pro M177fw MFP

  Hello

  I had no wifi problems between my Imac and HP Color LaserJet M177fw MFP Pro to scan until recently - it can be related to operating system update to OSX 10.11.4 which was done yesterday however.

  I can scan is no longer docyuments from the top of the charger page - scan starts but just hangs and then I can not re - activate the scan function until I have to force it to quit.

  Can you suggest appropriate corrective measures to try please?

  Thank you very much.

  Hello

  Make sure you have the latest drivers installed:

  In the Apple menu, click about this Mac, and then software update.

  Click on the main menu store reload the Page, and then select allow for the update check completed and install any publicly traded Apple / HP update.

  Then install problems with the products HP LaserJet on OS X El Capitan of scanning HP Software Update to address documents (ADF) automatic feeder:

  http://FTP.HP.com/pub/softlib/software12/OSX/HP_Easy_Start/Essentials/S/HP-printer-Essentials-S-4_5_0.pkg

  Kind regards

  Shlomi

• HP Color LaserJet 4500N streaks questions...

  Thanks in advance for any help that you could provide.

  Recently, I took a HP 4500N and have problems with the color of the stripes.  I replaced all the toner and also installed a new transfer kit (C4196A) and a new fuser unit (C4197A) kit for the machine.  It is also replace the feed roller.  In addition to all this, I also opened the machine and cleaned (wipe with a damp towel) all internal areas.  When printing after all this, it seems still relatively the same (see pictures attached).

  For me, it seems that I need to clean one of the other rolls but do not know where in the machine, I need to look at the next.

  Thank you
  Greg

  Looking at the drum, which seems to be exactly the problem. I'll order a new. Thank you.

• M177fw MFP: Color Laserjet MFP M177fw Pro do not leave the page logo star HP & energy and go to the home page

  I have a HP Color Laserjet Pro M177fw MFP multifunction printer.  When I power on, I get the HP & Energy Star logos on the touch screen of the printer, but then it crashes and the screen lights up.  My MacBook Pro will see the printer (I'm wired to it via a USB cable) and it will start to print, but crashes at halfway trhrough sending data from the computer to the printer.  Is there a way to reset the printer to its default settings (first anniversary)?

  Hi Audiomic,

  I can provide some measures that could help solve the problem.

  1. try to reset the printer. Powered on, unplug the power cord from the back of the printer, then wait 60 seconds. Reconnect the power cord to the printer and turn it back on the power. Wait for the printer to initialize.

  2. If the problem persists, try to download and install the latest version of the software package. The most recent update is 20160525.  You can find the update here. Click Download and follow the instructions to install the update via the USB port.

  3. If the update does not work, I recommend this HP forum thread going and asking that the support agent send you instructions to perform a NVRAM reset.

  This last step is the only way I know to do a factory reset if the screen is frozen.

• Color LaserJet MFP Pro 277dw: MFP will print but not scan since update Mac OS 10.10.5

  I had used my LaserJet MFP Pro wireless without problem for several years, with the Mavericks and Yosemite.  A few weeks ago a "update" the printer system is invisible.  After several hours of troubleshooting and to try five or six corrections, I finally got the printer online by using the IP address.

  My computers, however (a performer of the Mavericks and a Yosemite running), do not see the scanner.  It's not a question of adding - they do not to add it.  By HP support, I have reset the system print and tried to start over.  I downloaded HP Easy Print (or Easy Start or whatever), which is the entire site of support in the way of software for the 277dw of the ACM.  The software through me the entire upward and congratulated himself for a job well done, but my printer was not, in fact, related.  He appeared in the printers Control Panel, but would not print.  Just "connecting to printer" in the queue for ten minutes about until what I called off work.  And the scanner does not yet show in the Image Capture, preview or HP Easy Scan.

  So, I went back to my previous fix for the printer, use the IP address.  Any ideas on how to get the scanner appears?

  Hello

  Restart your router by unplugging its power for 30 seconds.

  Once it is fully up and you have internet access on your Mac reboot both the HP printer and the Mac.

  From system preferences, select Printers and scanners and click on the plus sign to add the printer again.

  Can you now ee he listed as Hello type or not?

• Color LaserJet Pro M177fw MFP: HP Color LaserJet Pro M177fw MFP is not not color copy

  Hello, I have a HP Color LaserJet Pro MFP M177fw, when I try to copy in color mode, the printer gives me the newspaper (on the LCD screen), color copy is limited. I did not have a password for the printer. and this error is seen when you use both scanner feeder and flat bed.

  I appreciate your comments and thank you in advance for your help

  Best,

  The gesture would be to try to restore the default settings of the control panel of the printer.  Conflicting configurations on disabling color copies would be destroyed and normal again.  Resets are normally under the admin menu or the control panel service.

• HP COLOR LASERJET PRO M252DW: HP COLOR LASERJET PRO M252DW never able to print without problem

  M252DW running on WiFi with three computers Win10.  Regardless of the computer that I use, the printer doesn't print.  Message to print screen says not 'online' when it is by the LCD.  Can I reset or power cycle, no help.  The only thing that seems to help is going to the printer and print a test page. This step seems to help sometimes, and I get a test page and can't seem to print for a period of time.  It is happening since new (July 1015) and I'm about to returned.  FYI, I have no problem to print wireless an inkjet Canon, sitting next to the ch, from any computer.

  Any suggestions other than buying a laser gun?

  Thank you

  Mark

  Hi @Henk57,

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• LaserJet CP1025nw: My CP1025nw does not print envelope #10: gives an error "on paper" OS10.11.4 running

  I can not print envelope #10: gives an error "on paper" OS10.11.4 running

  Using a document separate from the Pages to the envelope size, tried several envelopes loading.

  Hi @RonD3,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a color printer HP LaserJet Pro CP1025nw with a Mac OS X 10.11.4 El Capitan computer and you can not print on envelopes #10 because you get an "Out of Paper" error message I would like to help with that.

  You want to make sure that you're using the envelopes recommended for laser printers only and that the envelopes are loaded correctly. The printer may not recognize the media which are not intended to be used with it. Here is a support document covering guidelines for loading and printing on envelopes - loading paper and envelopes for the HP LaserJet Pro CP1025nw color printer.

  Here is the document of support for seeing the message "Out of Paper" when there is paper or envelopes in tray - "on paper" Error Message is displayed and the printer is not Pick Up or paper source.

  Then I would like to reinstall the driver of HP with Apple Software Update. Here is a support document which can serve as a reference if necessary - install a printer Mac driver by using Apple Software Update.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Why my printer HP Officejet 6600 uses color ink even if I'm not printing in color?

  I've had this printer about a year now. I replaced the full range of ink at least 3 times now, working on 4. I don't post much at all. A couple of leaves a day or two. I always thought she was using color ink very quickly so I thought I'd put it to the test. I changed the default settings in black ink only. I have replaced all the ink cartiridges, color and black. I decided this time I would not print anything in color just to see what happened. Well, the same thing is happening as if I were with color ink. The color ink is empty much faster than black ink. This seems weird to me. Now, we are at the point where it will not be printed unless I have replace the magentia. It seems unfair that they do not mention this clearly when you buy the item. Something like "Oh, by the way, we are not making enough money doing business as it should, then we will make replace you your ink supply, even if it is really not necessary and must take over." I paid for a new printer already with ink costs. Is there a way around this problem or am I stuck with it. Thank you.

  When you set the printer to print grayscale has also selected "black ink"? only

  HP and other printer manufacturers have technology another printer for different needs.

  • Some have integrated into the ink cartridges print heads.  These printers can print generally with one or more of the colors completely empty, or even with color or black cartridges (but not both) removed. The Deskjet 6980 series is an example.
  • Other printers have separate replaceable printheads and inks.  An example would be the printer Officejet 8600.  In these printers print head can be replaced if they are damaged by running the printhead with colors off.  Some of these printers allow printing with a color, the other will not.  If the printer is run without ink in one or several colours, the printer may be damaged, but the user may be able to recover without having to send to the printer for the service.
  • Other printers have permanent print heads.  To run only those without little ink in all colours would risk causing damage to the printhead due to clogs, air ingested in the grilled printheadvor printhead resistances of shooting. The Photosmart 6600 series is an example of this type of printer. For printers with fixed print heads that could require the service to get the printer to print properly again when the ink is finally replaced.

  The document described here how the ink is used.  The document is written for inkjet printers HP the same principles apply to printers inkjet from other manufacturers.