Separate section on the homepage to drive

Similar Questions

• Example: Pavilion a230n: replace the CD rom drive in Hp Pavilion a230n

  I just saved a Paviliona230n to a sad end. He dumped the parts of the body, but I had an old Millennium that I could upgrade to XP or higher. I put two Cd-rom drives in and may not know how to do it without removing the AMD CPU and fan - something I am unwilling to do without instructions.

  Are they cut down and how I unplug safely so I can insert the CD rom drives.

  I guess I'd the drive readable than plugging in the cable (top) master and the rewritable as the slave.  OR?

  I think I already exaggerated the bit of memory because the machine seems to have an a GB of memory and I put both of them in. Seems to work.

  Then I need to get drivers especially for the ethernet connection.

  More important is the method to remove the block of memory to AMD. Of course, I don't want to mess that up.

  Just for interest: the hard drive with the millennial system OP is flaky. I think it was the program, but when I tried to install XP as an 'upgrade' (to save the programs and files) it has failed twice. Only when I did a full install worked.

  Then I'll have to check the integrity of the player itself and I doubt that my disk wipe dbam (boot and nuke) work on it. He also did a great job on checking the hard drive before installing anything. It was not recognized by Millennium.

  TIA

  If you have questions of factory with that I could repay your answer please visit http://sequimplants.com/

  I also have a blog, google more on plants. The plants were at the beginning of this need to find a computer equipped with a 3.5 inch diskettes. Years ago I had an excellent program of Gardenware (plus 250.00) to create labels. I made a library of 600 point of my plants with descriptions.

  Win 3.1 now. I can't even install it again because it is the innovative and he needs a key to unlocking that the company no longer for older versions. Nothing else can read or open the backup disk library... so I downloaded a Viewer freefile and hope that it will work on this subject. I hope on the XP version. If this isn't the case, I'll have to install a floppy drive on one of my computers in Win 7.

  I found this to be beyond comprehension. If you're selling a car, you have to keep the parts for it. I don't see that the developer of this program may not have kept the unlock codes for all older versions. Certainly don't makes me want to buy their NEW release for 199.00.

  If this Viewer freefile unfold all I can do is get a mobile 3.5 floppy drive with a USB port and plug it into another computer of Nurserymans to see if the new version can read.

  Herb, welcome to the forum.

  Here are the sections adding/replacing hardware on the computer.  You should be able to use the replacement of a section of the CD/DVD drive for you help with your problem.  In this section, there is a guide for the replacement of each component.  Also, here is the page of the mother card .  It shows that the maximum memory is 2 GB.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• If I put a CD in the playback section of CD/DVD & written it says no driver, I tried Microsoft fix it & that's what he says is not readable media in the CD/DVD drive

  Original title: my PC can't find driver when I try

  My PC is windows media player update and since then he said I have no drivers, but only says that if I put a CD in the playback of CD/DVD & written section it says no driver. I tried Microsoft fix it & that's what he said...

  media in the CD/DVD drive is not readable (sony DVD - ROM DDU1613)

  I can't copy discs either, but the section DVD plays ok

  To install codecs for Windows XP, click here to download.

  Click on the KB article number to bring up the article and automatic FixIt.

  Article ID: 291818 -how to Download Codecs automatically in the Windows Media Player for Windows XP

  I hope this helps.

  Marilyn

• Separate into sections for the validation form

  I have a form that is really two forms in one. Section of the Internet and a lower part. Each section has a send by email button that sends the PDF form to the Department and the next. I want the top half of the form and make sure all required them areas are met when is clicked on send by email button in the upper part. So I want the bottom section send by email button to check only the lower part before sending the form. Is it possible to break it down into two parts like that?

  Hello

  If each part of the form is in its own subform, you by targeting the subform that you want to validate. For example, e-mail insertsactuellement button would in the click event:

  if (topSection.execValidate() == true) {
       // send email script
  }
  else {
       // warn user script
  }
  

  Hope that helps,

  Niall

• Is it possible to work on projects iMovie on external hard drives in order to save disk space on my macbook (the internal hard drive has little space)?

  Hello!

  I have a problem working with iMovie on my MacBook Air... Drive HARD internal of the MacBook is unfortunately to small for the biggest projects iMovie... Is there a way to work on external hard drives or perhaps TimeCapsule?

  Thank you very much in advance!

  Yes, put your iMovie library/ies on a fast (7200 RPM) external hard drive to the Apple format is a good way of working.  Details of the setting up of libraries are covered in the help files to:

  http://help.Apple.com/iMovie/Mac/10.1/#/mov3fa25bae7

  Note that you may need to consolidate the media in an existing library before you travel to avoid breaking links to media located in the libraries from other Apple applications.  See:

  http://help.Apple.com/iMovie/Mac/10.1/#/mov882dee351

  I would not recommend using Time Capsule - you would need a separate partition above the used by time machine, and you could put some data on the same drive as backup.  Connection speed can also be a problem.

  Geoff.

• Cannot transfer pictures to the external hard drive (refused)

  Hey!

  I can't transfer jpg on my computer to my external hard drive all of a sudden. He's worked a lot of years and now when I try to drag the photos on it gives me a stop sign, that white circle with the diagonal line through it. What gives? Any help would be great appreciated! I have a lot of work there.

  Additional information:

  -J' have permission to read and write on the jpg photos, but the disk that he said that I can read only, and there is no way to change this, when I click on the little triangle down.

  -I can drag photos that already exist ON the disk hard ON my desk, but not vice versa

  -All files are jpg files, and they are in a separate folder on my desktop, not from my iphoto library or whatever it is

  -J' also tried to delete the "com.apple.recentitems.plist" of the finder, and nothing has changed

  -The disc model is a "Slim Seagate laptop drive"

  -Here is a photo of the hardrive info:

  

  Thank you

  The external HARD drive is formatted NTFS, which allows you to write on it unless you have a third party app like Paragon or Tuxera.

  You had these software installed by Seafgate in the drive, but it is now obsolete and should be updated.

  Ciao.

• Where is the SATA AHCI driver for the NB200 notebook?

  I searched the forum and I know that I should integrate the drivers under XP with Nlite, but I Don t find the NB200 AHCI driver in the driver download section!

  I don't know much about your model, but if you publish the chipset model, I'll try to find it for you:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=38

• Can I partition my drive Time Machine to back up the other 2 drives?

  Is it possible to partition a hard drive and use it with Time Machine to back up the other 2 drives?

  Example: I want to save internal drive of my iMac and my external storage drive, and I wonder if I can partition a hard drive for use with Time Machine, in order to safeguard my internal drive on one partition and the external drive to another partition. Hope that makes sense.

  Yes, if it's not a time Capsule, but I wouldn't recommend it. I would use readers separated for each device you want to back up. If you put all one hard drive and this player goes down, then you have lost all your backups. With separate if backup fails a drive you will always have backups remaining intact.

• Satellite M45 - does not start after restoration on the new HARD drive

  I installed a new PATA 250 GB HDD on my pc. The BIOS is configured to boot from CD/DVD. Toshiba Recovery disk started cold, start follow-up statement to load a new system on the HARD drive. He made a (quick) format on the HARD drive, spent 50 minutes, copy the files from the CD to the new HARD drive. Followed the instructions to remove the CD and reboot the pc. Did. I get the Toshiba homepage for 2-3 seconds, and then I get a white screen with a white block cursor in the upper corner of the LH of the screen. Looks like it does not find the block on the HARD disk?
  The procedure of collection 3 times with the same results. Checked the BIOS to check that it is configured to boot from the HARD disk after installation.

  The recovery CD is blank. Never used because I bought the PC (3.5 years). Put the new HARD drive in a USB enclosure and formatted with Windows, tried again with the same result? Put the old HDD, PC starts and works very well. Put the live CD Knoppix and boot from that, works very well. See the new HARD drive.

  Thus, any suggestions are appreciated. The recovery CD Toshiba is defective? In any case to test?

  Thank you
  -J

  Hello

  Sounds like a problem with the recovery disk or the new HARD disk if your computer starts up fine with the old HARD drive...

  In your case before you start a lengthy discussion, you should try a Microsoft Windows disk to install Windows. If he work it seems that only the recovery disk is defective.

  Otherwise, the HARD disk must be defective. Maybe a bad sector or something else

• Formatting the main HARD drive and do a fresh install of the OS

  Hi guys,.

  I have a Mid 2012 MacBook Pro running Yosemite (10.10.2). I did not care on the data management since the day that I bought and now it's all over the place and a lot of unwanted files. I have backups time machine the main hard drive and I also backed up all important data on a separate hard drive.

  My question is, is it possible that I can erase my entire hard drive and reinstall Yosemite (10.10.2)? The last time I tried to do this, my MacBook connected to the server and installed the latest OS (I guess it was time Cougar 10.8.4).) I don't want to update the OS because my Audio Interface has no drivers for what after 10.10.2.

  I don't like on the data loss that I have multiple backups of all the files of important work, as well as backups time machine of the disk set. Thus, formatting everything is completely fine with me.

  Thank you!

  neilkvyas wrote:

  My question is, is it possible that I can erase my entire hard drive and reinstall Yosemite (10.10.2)? The last time I tried to do this, my MacBook connected to the server and installed the latest OS (I guess it was time Cougar 10.8.4).) I don't want to update the OS because my Audio Interface has no drivers for what after 10.10.2.

  The only ways I know to reinstall 10.10.2 are:

  • You have the initial download of 10.10 after Yosemite went out and created a USB this version thumb drive Installer. If so, you can start Setup from USB, delete your Macintosh HD, install 10.10 and after 10.10 is installed, you can download and run the 10.10.2 Combo Update to bring it up to 10.10.2.
  • You have the 10.10.2 download after this version has been published and have created a USB this version thumb drive Installer. If so, you can start Setup from USB, wipe your hard drive Macintosh and install 10.10.2.

  If you can't do or any of the foregoing, all what you can do then is start Recovery HD and install the latest version of Yosemite, which is 10.10.5. Even if the HD recovery may appear 10.10.2,"limited you will always get the most recent version of Yosemite. Without either of the above, there is no way that I know how to install an earlier version of Yosemite. Maybe you could ask a local Apple Store to see if they have a solution for 10.10.2.

• can not get the new hard drive to work in the Pavilion ze4805us laptop

  have an HP pavilion ze4805us laptop which had a total hard drive failure... recovery disks were lost in a fire... replaced the hard drive with a Western Digital 250 GB drive... computer recognizes the drive, but with only 137 GB... impossible to obtain the Windows Millennium disk to install... I have it get the PXE - E61 error code... have looked for answers and tried a few suggestions to fix the error code, but no luck so far... would like to throw this laptop and runs again, it was so nice all in operation. Can someone help me with this? Thanks to all in advance... rrcar6

  At the level of the BIOS, HARD drive should show the full capacity regardless of the distribution, but it will be limited based on what the current logical block installed the BIOS supports.  For example, the 250 GB HDD Needs LBA 48 bit to be recognized by the BIOS in its entirety.  Western Digital only provides downloads of software and support going back to Windows XP.  Windows Millennium Edition is not able to recognize the full capacity of the drive.  Finding drivers compatible with Windows ME is perhaps another challenge that XP uses a different architecture than Windows ME done.

  It seems that this laptop is the same time that the books mentioned in this thread.  Response from JackShack gives the best explanation as to why he shows quite different in the BIOS.  It has been many years, but I do not remember that the capacity of the HARD disk had exceeded what the BIOS at the time supported resulting in the 137 GB limit displayed in the BIOS.  This section of Western Digital shows that this problem is related to the operating system or BIOS supporting however, this should not prevent Windows to install correctly.

  I'm sure it's already done, as it was not a new BIOS since 2004, but guarantee the newest BIOS is installed.  Logical block address 48 bits, necessary for the larger disks (larger for the time) was released in 2003.  The 2004 related BIOS earlier than probably took supported LBA.  What is the current version of BIOS?

  What is the exact message that you get when you try to install Windows Millennium Edition?

• The data stored on the external hard drive recovery

  Hello

  Recently, my PC got corrupted and told me to save my data on an external hard drive before doing a reformat on my PC. In fact, all my data was saved when I update. A few months ago, in may 2014, I backed up my data in the drive C under the section 'My Document ' and also registered in my external hard drive as a backup. Thus, in June, July & the first 2 weeks of August 2014, I updated some data and stored in the 'My documents' file in the C drive. My PC got corrupted last week and told me to do a reformat as a last resort. Before that, I saved all my data (especially my Word & Excel) for my external hard drive to the file 'My Document '. After that the reformatting was made, I downloaded all required applications and try to remove my Excel file, which has the external hard drive, but the data were NOT the updated file, but the file that has been saved 3 months ago!

  So, how can I recover my file up to date which was recorded August 12, 2014, supposedly on my external hard drive, or could it be hidden somewhere in the "C drive"?

  Help, please!

  Thank you!

  Kind regards

  Ros

  Moved from Community Centre of Participation

  Original title: Back up my data on external hard drive

  Hello

  You could try to use Easeus Data Recovery Wizard (free)

  http://www.EASEUS.com/DataRecoveryWizard/free-data-recovery-software.htm

  How to analyze a hard drive reformatted to recover files

  http://www.ehow.com/how_6515288_scan-hard-drive-recover-files.html

• small bug in the FLUKE PM668x driver, where the report?

  Hello

  just stumbled upon a minor bug in the FLUKE PM668x driver provided in the section of the driver.

  One ',' too in a format string in a cfg - vi to config: 6681 to a closed totaling.

  Where to report?

  However, I add the vi has changed.

  Hi Henrik,

  Thank you for reporting this issue, we have updated the driver and will soon issue the update.

• cannot play media in the cd/dvd drive (hl-dt-st DVD - RW gwr - 466 b)

  problem with media in the cd/dvd drive cd/dvd drive (hl-dt-st DVD - RW gwr - 466 b) will not read CDs/DVDs

  Hello

  1 how long have you been faced with this problem?
  2 do you have you can all changes on the computer before this problem?
  3. what exactly happens when you try to read any CD/DVD? You get the error message?

  Try to run the fix it tool to the article below and check.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  See also the section below.
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641

• Cannot set the homepage in IE 8

  I was recently infected by the virus 'Internet Security 2010' rogue / problem.  I ran Malwarebytes Anti Malware program and got rid of it and also to launch a program to solve the persistent problem of not being able to launch programs.  I have a problem that I can't fix... The homepage in Internet Explorer 8 is set to Dell4Me.com and I try to remove it, change to a different home page, but it keeps coming back to this one.  Can someone please help me solve this problem... it just happened when I had the problem of «Internet Security 2010»  I am running Windows XP Home Edition.

  MUCHAS gracias!

  Andy

  If the feature is disabled (grayed out), go to Doug Knox website and download this script:
  http://www.dougknox.com/security/scripts_desc/NoSetHomePage.htm
  Usage: Download nosethomepage.vbs and save this file on your hard drive. Navigate to where you saved it, and double-click the file. The VB Script file will check if any value and if it not is not will create the. You will be notified if the option is on or off.

  To manually change the: start/run/Regedit

  HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Control Panel\HomePage

  In the right pane, right-click the value homepage and select Edit. Change the value by: 00 00 00 00

  See also these keys:

  [HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main] "Start page".

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer] - DWORD "NoSetHomePage" = DWORD: 00000001

  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet
  Explorer\Restrictions-] DWORD "NoSetHomePage" = DWORD: 00000001

  Change the values 00 00 00 00. MS - MVP - Elephant Boy computers - don't panic!