If I put a CD in the playback section of CD/DVD & written it says no driver, I tried Microsoft fix it & that's what he says is not readable media in the CD/DVD drive

Similar Questions

• I can not install 2680317. I get the error code 80070641, not 646. I tried Microsoft fixit and still no installation. Any ideas out there?

  I can't install the update to windows KB2680317 update for Microsoft Works 9.  I get the error code 80070641, not 646.  I tried Microsoft fixit and still no installation.  Any ideas out there?

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, and then try to install the updates and check if it works.

  How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

  Method 2:

  Try the steps in the Microsoft article and check below if the problem persists.

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  Try to download updates from the Microsoft Downloads Web site and check.

  http://www.Microsoft.com/download/en/default.aspx

  And also to try the steps in the following Microsoft article.

  http://support.Microsoft.com/kb/818018/en-us

  Hope the information is useful.

• CD/dvd drive is not readable (media)

  I am not able to play audio CDs or burn CDs.  I tried Mr. Fix - IT and it is not fixed, I tried to uninstall the device and reboot, updates and restoring my computer.  It still does not work.  Is there anything else I can do?  Or something needs to be replaced.  I'm quite frustrated.
  Any help or ideas will be appreciated.
  Also, installation of a program of landscaping a month ago, uninstalled.
  Honestly, I don't know how long it has been a problem, tried to burn a CD from itunes (2 days ago), which initially burned, but would not play in 2 other CD players, who brought me to try another CD and discovered that she was not working.
  Thank you!

  If you have done this, check with the system manufacturer and the manufacturer of the device and verified with the Expert Forum
  There is little you can do except ask for technical support. If you have not then you are going to pay for something
  you would have been able to fix it yourself. Of course the drive could fail and none of this will help.

  Looking for a computer store real (not of leeks and glances at a BestBuy or other stores BigBox) or the manufacturer of your system
  Supported.  Rob - bicycle - Mark Twain said it is good.

• After that an update of Windows can not hear noise and can't read the DVD

  I downloaded updates Windows today and now I can't hear any sound and my laptop will not read the DVD. Any ideas?

  There are a couple of Microsoft FixIt automatic that might help with your problem.

  Troubleshooting problems of CD/DVD.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

  Troubleshooting sound problems:
  http://support.Microsoft.com/mats/NO_SOUND/

  Let us know if these help you with your problem.

  Thank you

  Marilyn

• Media in the CD/DVD drive is not readable

  Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device responding drive is empty or the media format is not supported

  WINDOWS VISTA HOME PREMIUM SERVICE PACK 2

  RANGE OF COMPAQ PRESARIO CQ61 NOTEBOOK PC

  • My laptop can read the DVD, but it will not read I try to play any CD. It will be still asking to insert the disc when I.
  • See below the report of Mr. Microsoft Fix

  I appreciate your help with this. Thank you

  Problems found
  Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device The drive is empty or the media format is not supported	Not fixed
  Insert the decipherable by media Failed

  Verified issues
  Class filter drivers are corrupt Class filter drivers are corrupt One or more specific class filter drivers are missing/corrupted	Checked
  Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device) Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device) One or more device-specific filter drivers are missing/corrupted	Checked
  Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device) Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device) This device is faced with a problem that it prevents to function properly	Checked
  Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device) Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device) The CD/DVD drive have been disabled in Device Manager	Checked
  Drive is not assigned a drive letter Drive is not assigned a drive letter The CD/DVD drive is not accessible via a drive letter assigned	Checked

  Problems found	Details of detection
  6 Media in the CD/DVD drive is not readable (Optiarc DVD RW AD-) 7561 ATA Device Not fixed
  The drive is empty or the media format is not supported
  Insert the decipherable by media Failed Insert a CD or a DVD disc play in the selected CD/DVD drive
  Verified issues	Details of detection

  6 Class filter drivers are corrupt Checked

  One or more specific class filter drivers are missing/corrupted

  Fix class filter drivers Not work   Remove references to class filter missing/corrupt driver

  6 Filter of device drivers are corrupt (Optiarc DVD RW AD - 7561 ATA Device)

  Checked

  One or more device-specific filter drivers are missing/corrupted

  Uninstall the device Not work

  Uninstall the device problem

  6

  Device is not working properly (Optiarc DVD RW AD - 7561 ATA Device)

  Checked

  This device is faced with a problem that it prevents to function properly

  Rescan devices Not work

  Look for changes in available devices

  Uninstall the device Not work

  Assign drive letters to all the readers who have no drive letter

  6 Drive is disabled (Optiarc DVD RW AD - 7561 ATA Device) Checked

  The CD/DVD drive have been disabled in Device Manager

  Turn on the device Not work   The device must be activated before it can be used

  6 Drive is not assigned a drive letter Checked

  The CD/DVD drive is not accessible via a drive letter assigned

  Drive letter Not work   Assign drive letters to all the readers who have no drive letter

  Hello

  Well you have studied the issues pretty well. Could be material.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  A CD/DVD cleaner might help.

  CD have a tolerance + - and your must read on the edge outside these tolerances of discs.
  They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ============================================

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media in the CD/DVD drive is not readable (hp DVDRAM GT30L)

  Hello guys. This is my first post in this forum.

  I already ran the Microsoft fixit CD/DVD drive and the problem is the media in the CD/DVD drive is not readable (hp DVDRAM GT30L). I also tried the DVD in my desktop DVD player and stands so the problem is in the CD-ROM of the laptop.

  Hello Blue_Cloud213,

  Welcome to the HP Forums!

  I understand that the computer is unable to read the CD and DVD. Since you reduced the problem to only one computer, please try all the steps in this document from HP: disk impossible reading disks (Windows 7)

  Please let me know what happens. Thank you!

  Mario

• I put a cd in the drive to install norton. How to operate?

  I put a CD in the CD tray and closed.  He has not started running in itself nor could I know how to start work.

  Beginning--> left click on computer. Who should call a windows like the following picture.

  

  Right-click the DVD RW drive icon and select and click on 'Install or your media enforcement program. " Setup is installing the software. Answer Yes if asked for permission to install or run the program from your operating system.

  The example is Windows 7.  I couldn't give you an example of your OS because you forgot to say what it was.

  Best regards
  ERICO

• How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  * Original title: windows 7 download

  I have a laptop dell M4400 with windows 7 pro OA. HARD drive crashed and I replaced with a new one. How to put Windows 7 on the new hard drive without boot cd? How will I know if 32 or 64 bits? This computer yourself running windows 10?

  It has probably comes with Windows 7 Professional 64 bit.

  You can download a copy of Windows 7 Professional using the following instructions (update of Microsoft recovery software supports downloads with the COA key):

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

  You can also use Windows 10 too as you have the right to it as a free upgrade:

  • How to download official Windows 10 ISO files
  • How to: perform a clean installation of Windows 10
  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• How to fix: media in the CD/DVD drive is not readable (TSSTcorp CDRWDVD TS - H493B SCSI CdRom Device)

  I am trying to connect a wireless printer, however, my PC does not recognize that there is the CD or installer for drivers etc. in the CD slot! It does not recognize anything in the slot! What to do!

  This kind of problem DVD can have several causes.  However, in 99% of cases that I ran into that, the problem is quickly, completely, cheaply and easily treated by simply installing a new drive.

• While the implementation of CS4, I am asked to put a cd in the drive to finish the installetion. I have no cd. I am downloading from Adobe. What to do?

  While the implementation of CS4, I am asked to put a cd in the drive to finish the installetion. I have no cd. I am downloading from Adobe. What to do?

  Hello

  Have you downloaded from the link below?

  Download the CS4 products

  Kind regards

  Sheena

• Want to put my music in the Genre of lists that are on the drive

  Hello.

  This is my first mp3 player.

  I have the 4 GB model.

  I spent a few hours to put my music in the music file and I separated by gender in different folders.

  However, once I started the player shows not the separation of the kind that I made and music is simply indicated in the field of music.

  I discovered the type area in the part of the music from the player and my songs have been placed in different genres within that.

  Many of them are placed wrongly and wish to move them to their correct type positions.  Anyone know how?

  I have never used the cd that came with the player.  I never downloaded Rhapsody songs or all kinds of sites or I want so I didn't see no need to install this cd.

  Also, I don't know what "go list" is.

  The player of love!  The noise level and the volume is really nice!

  The Clip (and all other Sansas) do not "read" records; but by ID3 tags, embedded in the music files themselves. Therefore, no matter what you create to "store" in folders, the Clip shows the information he gets from the ID3 tags.

  You must change the field TYPE of the ID3 tag to change them at your leisure. Otherwise, they will be displayed by any type that they are currently stamped.

  A good (and free) program to do with MP3TAGis. Set it to write tags ID3v2.3 ISO-8859-1 for best results.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Cannot put an end to the programs

  Whenever a program crashes on my computer, and I try to put an end to this program, I can't do it.  It's as if the pane "end of program" also blocks.  So, I have to turn off the machine.  Anyone know what I can do?

  Instead of finding ways to put an end to the program when your computer crashes, I recommend you to understand why your computer is locking up and fix it in place.

  If turn you your machine (I guess than the power button), you will soon have a new post that looks like this:

  My system does not boot and I see a message like this:
  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Then someone will offer to you try to repair your system with KB307545 and which will not help you either.

  XP has a built-in mechanism that is designed only to help diagnose the locking systems, freeze or crash, and it is very useful.

  I suggest to use (that's what it is) after general troubleshooting basic steps are exhausted.

  You know - easy as questions... What is the program that is locked?

  I would also say everyone with blocking XP problems starting their own new topic so they can be worked separately, or this thread is going to be annoying quickly.

  Thankfully, I'm not a moderator (Fortunately, I don't have no control on the operation of this forum).

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  They can be uninstalled later if you wish.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• I use a dvd - r disc, but the movie maker says is not a recordable disc

  I use a dvd - r disc, but the movie maker says is not a recordable disc. also, when I try to publish the dvd is not the choice, her computer, a recordable cd or camer digital video...

  If you're running Vista Home Premium or Ultimate...
  the following article is perhaps worth the drive... If not...
  You'll need to publish (your Movie Maker save project)
  in the. WMV video format and the use of third-party software
  to burn your DVD.

  "Import files into Windows Movie Maker" "publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html
  Scroll down to: "2 to publish and burn a movie to a DVD")

  If you need DVD Authoring software... What follows
  freeware software can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  I tried the clean boot and now the hard drive works simply and screen went black. The mouse still moves around the screen without any outher work keys? That is what it is?

  Hello

  You will need to reverse the clean boot, as it is either incidental compared to
  the real cause of the problem. What, where you try to fix initially using the cleanboot?

  You can access Mode safe? Repeatedly press F8 as you start? If so you can try the configuration - control panel
  The Device Manager - graphics card - Double click on - driver tab - click the driver UPDATE - then
  Right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure) is
  CTRL + ALT + DEL and the processes tab find EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions. You
  will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - enter a bracket )
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.