Serial numbers of the ESX host

Similar Questions

• Get the serial numbers for the HP monitor?

  Hello

  I need to get the serial number & s 100 HP monitor model numbers to estimate the warranty end dates. Of course, also for our future inventory internal

  I think that's not possibe with HPDM as a device of Numebers series TC traction.  Is it possible/script to get the serial number of the monitor. ???

  Thank you

  DIN

  Finally, I have a script to get the serial numbers of the monitor.  Rename the attachment to info.vbs
  
  OUTPUT
  
  C:\ > cscript/nologo monitor_info.vbs
  Computer name not found, using the local system.
  Serial number: MXL9040HWP
  Maximum capacity: 4194304
  Maximum capacity: 4096
  Reference number:
  Serial number: MXL9040HWP
  Inventory number: MXL9040HWP
  
  Monitor has)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor B)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 264 b
  .......... Manufacturing date = 9/2006
  .......... Serial number = CNK6380R6C
  .......... Name of the model = HP L1755
  .......... EDID Version = 1.3
  Monitor C)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor D)
  .......... Manufacturer ID = HWP VESA
  .......... Device ID = 26FB
  .......... Manufacturing date = 4/2009
  .......... Serial number = CNK9170083
  .......... Name of the model = HP L2245w
  .......... EDID Version = 1.3
  Monitor E)
  .......... Manufacturer ID = NEC VESA
  .......... Device ID = 61BE
  .......... Manufacturing date = 7/2001
  .......... Serial number = serial number not found in the EDID data
  .......... Model name model = not found of the EDID data descriptor
  .......... EDID Version = 1.3

• Serial numbers of the device on iCloud

  My House was robbed and stolen apple products, can you get the serial numbers for the devices I had on iCloud?

  If you connect to iTunes via your computer, you can locate the numbers to find the serial number of your Apple - Apple Support product -series

• How to report the current time on the ESX host in to a csv file with the following

  Hello guys

  I have the script next where I make the required details except the current time on the ESX host. Anyone can guide me please.

  		{foreach ($esx to $vmhosts)
  			$hostVC = $vcenter
  			$hostCluster = $esx. Parent.Name
  			$hostHost = $esx. Name
  			$ntp = $esx | Get-VMHostNtpServer
  			$hostNTP = "$ntp".

  			}

  I want to integrate the following for loop of the above for loop and ge the output in a single table.

  foreach ($esxcli in get-vmhost | get-esxcli) {"" |} {Select @{n = "Time"; e = {$esxcli.system.time.get ()}}, @{n = "hostname"; e = {$esxcli.system.hostname.get (.hostname)}}}

  Add-Content - Path '$hostVC, $hostCluster, $hostHost, $hostNTP, $hostTime' $hostInvFile - $ hostTime is where I want to get my host right now.

  I'm vcenter, esx name, name of the cluster, host of the ntp server address, but I need the host thus present.

  Thanks in advance.

  Thank you

  vKar

  Try changing the line where the script retrieves the VMHost to this

  $vmhosts = get-VMHost-State connected. Name sort

  This way the script will be only to ESXi nodes that are "connected".

  Pick up time for those defective does not much sense in all cases

• Adding data to the ESX host store

  Hi all

  We are automating the process of adding data to the esx host store. We have all the necessary inputs as a host, Cluster, data center, data store name, store (VMFS) Pat data.

  Do we have the cmdlets to get the result? What is the data store should be added after the configuration of the network?

  We need confirm that the data store must be there in vcenter/Cluster?

  Please help explain the process.

  Thanks and greetings

  Riyas Hussain has

  If the LUNS on which these data warehouses are defined are zoned and correctly configured as a shared, they become automatically visible on the ESXi node.

  Do you see the LUN on different nodes of ESXi under storage adapters?

• Reboot the ESX host as possible while on VM snapshots exist?

  Can you safely do a reboot of a host ESX VM there was on this host which are off (of course), but have a snapshot exists at this time?

  Because we restart some ESX host but you also have to install some Windows updates on the virtual machine on these hosts. Normally, we take a snapshot of the WM, install updates, restart, check if everything is working fine, and then remove the snapshot. But after a reboot the ESX host we also check if the VM have started and are working very well. In this case, it would cost me 2 restart and check for WM

  When I could do the snapshots, installation of updates, power off the virtual machine, reboot the ESX host, turn on the virtual machine, all check and then delete the snapshots, it saves me time. Only thing I don't know and can't find is so it record to make a snapshot is by restarting the EX host and if the snapshot can be deleted after reboot normally.

  Welcome to the community,

  don't worry, a restart of the host is quite VMs, regardless of whether they are active or not snapshots.

  André

• Question ESXi 5.5 with turn a virtual computer: "an error was received from the ESX host turning on VM" '22 (Invalid argument)"'DiskEarly on a power Module failed.'

  Here's what happens when you try to turn it on one of my virtual machines (see also accessories):

  Error stack:

  An error was received from the ESX host turning on VM vzilla-ws2012r2e.

  Unable to start the virtual machine.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_3.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  Power DiskEarly module has failed.

  Cannot open disk ' / vmfs/volumes/51286ca4-ef967828-664d-001b2129ad71/vzilla-ws2012r2e/vzilla-ws2012r2e_4.vmdk ' or one of the snapshot disks it depends on.

  22 (invalid argument)

  This circumstance may be linked to a sata cable issue, with the possibility of temporary loss of connectivity, which could result in data loss/corruption, I realize.  It is a laboratory box.  Especially say that the 2 VMDK he complains (trying to light) is both on the grounds of a single physical disk. Data, read and written to the speaker, since the problem are very good (which indicates the wiring problem was resolved, and the VMFS5 file system seems to be in good health).

  No photos.  No related clones.  Just a 2012 Windows Server based VM, with several drive letters in, with those underlying files VMDK residing on different stores of data VMFS5.  Implemented end (these drives aren't really so huge), but far from running out of physical space for the data either. Everything is working great for months, until today, trying to it turns on again.

  You are looking for:

  "Failure error disk beginning module lit" results in this article:

  error disk on start module failed

  which indicates the .lck files may be present.  It does not exist.

  Then upwards, of a variety of other items:

  Re: Unable to start the virtual machine: invalid argument on *-flat.vmdk

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1004232

  https://communities.VMware.com/message/search.jspa?peopleEnabled=true & userid = & ContainerType = & Container = & q = module + DiskEar...

  error disk on start module failed

  but alas, none of them seem to relate directly, or exactly.  My vmware.log file is attached below, as well as some screenshots of to show the structure of the unity of this virtual machine.  Hoping that this post proves fruitful, if anyone has had a similar situation.  The data at stake here are (mostly) redundant, but I would rather understand my way of it, in the case where it happens to me again, or can help others.  Many preferred rather than give up, reformat the VMFS and start again.

  Thank you!

  Good news, the best result I could hope. No data is lost. No corruption of the VMFS or NTFS don't drive in the virtual machine. Nice!  Saved me a few terabytes of data restoration and learned a little more on file system of troubleshooting along the way.

  It took a technician of VMware Service excellent, attentive, methodical remote 2 hours in a WebEx previously to resolve problems with these 2 files vmdk manually, because he found that there is a lock on them. I opened a request of Service (SR) # with VMware by following the instructions here:

  VMware KB: Cannot access certain files on a VMFS datastore

  To resolve this problem, apply for support from VMware Support and note this ID (1012036) Knowledge Base article in the description of the problem. For more information on the filing of a request for support, see How to submit a support request.

  I'll cover this saga and the exact process for collecting and downloading of newspapers, through to my TinkerTry.com, including the ride video.  I even captured much of the technical work that has been done. That said, it is true that little of the magic that was made to resurrect the metadata will remain a mystery, given that this piece is VMware.

  I'm ok with a bit of black box, considering how I'm happy that I got all my data, and time savings that the quick recovery represented.

  By clicking on the button "answer".

• I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.

  I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.

  I was able to ping before the update. Test management system also fails to ping the default gateway.

  I sent a private message you, could answer you on this one here? Got iso's, he's now testing in my lab, but I don't have that kind of network cards, you will need to do the real test for me.

• None of the serial numbers on the product box build fields to enter in the window? Am I missing something?

  None of the serial numbers on the product box build fields to enter in the window? Am I missing something?

  Yes.

  Quickly find your serial number

  Redemption code help

• Check if the esx host is in maintenance mode

  
  Hello

  I need to know if there is a api in java vi which can let us know if any of the esx host is currently in maintenance mode?

  I know there is a way to discover this through the same monitoring using event Manager, I need to know is an api live which can let us know if the esx host is in maintaince at that precise moment?

  Thank you and best regards,

  Rachid chollet.

  Hi rachid,.

  I guess that the following property is what you are looking for: HostSystem.runtime.inMaintenanceMode

  But watch out for the docs for the property when it reads it: it is not set during the entry phase of maintenance mode.

  --

  Thomas G.

• How to view the ESX host name as well as the information on the material (see text)

  I would like to see the ESX host name in the first column.

  Is there a better way to do it?

  Any help is very appreciated.  Thank you

  The section of my script for the hardware looks like this:

  #######################
  # VMware ESX hardware #.
  #######################
  Get-VMHost | Get-View | ForEach-Object {$_.} Summary.Hardware} | Select-object name vendor, model, MemorySize, CpuModel, CpuMhz, NumCpuPkgs, NumCpuCores, NumCpuThreads, NumNics, NumHBAs | ConvertTo-Html-title "Configuration of VMware ESX server Hardware" - body "< H2 > VMware ESX server Hardware configuration." "< / H2 > ' | Out-file - add $filelocation

  And My on put currently looks like this:

  (I want to see the name of the ESX host as the first column)

  Hardware configuration of VMware ESX server.

  Name of the vendor	Model	MemorySize	CpuModel	CpuMhz	NumCpuPkgs	NumCpuCores	NumCpuThreads	NumNics	NumHBAs
  HP	ProLiant DL360 G7	34348974080	Intel Xeon E5640 CPU @ 2.67GHz	2666	2	8	16	4	3
  HP	ProLiant DL360 G7	34348974080	Intel Xeon E5640 CPU @ 2.67GHz	2666	2	8	16	4	3
  HP	ProLiant BL460c G6	25758969856	Intel Xeon E5540 2.53 GHz CPU	2533	1	4	8	8	3
  HP	ProLiant BL460c G6	25758969856	Xeon of Intel (r) CPU X 5570 @ 2.93 GHz	2933	1	4	8	8	3
  HP	ProLiant BL490c G7	137428156416	Xeon of Intel (r) CPU X 5675 3.07 GHz	3066	2	12	24	4	2
  HP	ProLiant BL490c G7	137428156416	Xeon of Intel (r) CPU X 5675 3.07 GHz	3066	2	12	24	4	2
  HP	ProLiant BL490c G7	137428156416	Xeon of Intel (r) CPU X 5675 3.07 GHz	3066	2	12	24	4	2

  Not a more elegant solution, but it should produce the desired result

  &{foreach ($esx in Get-VMHost){
    ForEach-Object { $esx.ExtensionData.Summary.Hardware } |
    Select-object @{N="ESX Name";E={$esx.Name}},Vendor, Model, MemorySize, CpuModel, CpuMhz, NumCpuPkgs, NumCpuCores, NumCpuThreads, NumNics, NumHBAs}} |ConvertTo-Html -title "VMware ESX server Hardware configuration" -body "
  VMware ESX server Hardware configuration.
  " |
  Out-File -Append $filelocation
  

• get the mac address of the ESX host through powershell commands

  How to get the mac address of the ESX host through powershell commands?

  Is there a particular reason that you are on this rather old version of PowerCLI?

  The current version is 5.1 R2

• Downloaded Windows, need the serial numbers on the Mac, first download also.

  Accidentally, I bought the items/first Windows version. I need the Mac Version. I have already made contact with the customer and did not respond for an hour. I downloaded the trial version and tried to put in the serial numbers in the email, but they do not work. I couldn't download a first btw test, it downloaded only the part of the elements. I need the serial numbers appropriate... Or Adobe customer service email?

  Thank you. -Stephanie

  I finally got someone who speaks to me. He said I had 2 options: he could disable my Windows serial numbers and send me serial numbers Mac. The other option was to return and get a refund for the version of Windows and then buy the Mac version.

• to install Indesign on my new computer, but can't. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for the two and was able to use it on my last computer. Where should I start?

  to install Indesign on my new computer, but can't. First bought CS2 in 2009 and upgraded to 7.5 in 2011. I have the serial numbers for the two and was able to use it on my last computer. I use Indesign that often but there are some projects that it is good for. Where should I start?

  Lchrichton123 what version of InDesign are specifically keen to install?  You can find links to the installation files for the majority of Adobe Creative software titles of other downloads

• Get the LUN of the ESX host Info

  Hello:

  Is there a way to extract the info from the ESX host LUN?  I need (s) Lun sees number/ID to match the storage admin ID...

  Thank you very much!

  Of course, the easiest way is this

  $report = foreach($esx in Get-VMHost){
      foreach($hbaKey in ($esx.Extensiondata.Config.StorageDevice.ScsiTopology.Adapter | where {$_.Adapter -like "*FibreChannelHba*"})){
          if($hbaKey.Target){
              foreach($tgtKey in $hbaKey.Target){
                  foreach($lunKey in $tgtKey.Lun){
                      $hba = $esx.Extensiondata.Config.StorageDevice.HostBusAdapter | where {$_.Key -eq $hbaKey.Adapter}
                      $lun = $esx.Extensiondata.Config.StorageDevice.ScsiLun | where {$_.Key -eq $lunKey.ScsiLun}
                      Select-Object -InputObject $lun -Property @{N="Host";E={$esx.Name}},
                          @{N="HBA";E={$hba.Device}},
                          CanonicalName,DisplayName,@{N="LUN";E={$lunKey.Lun}}
                  }
              }
          }
      }
  }
  $report | Export-Csv "C:\lun-report.csv" -NoTypeInformation -UseCulture