Similar Questions

• Stop the connection timeouts occur - want the page wait

  I run several tab that monitor various tools. These pages will refresh. Pages must wait each other finish before you can start.

  In version 28 it was beautiful. The page just wait indefinitely and kicked in a previous page after doing its thing.

  Now in version 29 he comes back with a message "connection timed out" after a few minutes.

  I adjusted

  Network.http.connection - timeout
  Network.http.pipelining.Read - timeout

  for values but the problem still occurs. Any thoughts on how I can find the FF28 behavior?

  Try setting the http.response.timeout parameter. In the version 28, it had not been established. Version 29, it is located at 300 (5 minutes). Should help to move on to something much larger.

  See this blog entry:

  http://morgb.blogspot.com/2014/05/Firefox-29-and-HTTP-response-timeout.html

• Connecting to a server 10 Linux window and window 7 causes a connection timeout

  I have configured a certain configuration of Linux server in network.

  10 and the window 7 window causes a connection timeout when connecting to these servers.

  I tried to connect these servers with Windows not as Android and Mac but also Windows XP system and I connect to these server just fine so I don't think it's a firewall issue.

  I have also connected to these servers very well in the past with window 10 and Windows 7 so I think that the issue is a recent update of security Windows.

  Then I tried these problems myself but have no chance to find a solution

  I can also give you site to see the problem www.ozanet.com

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• ORA-12170: TNS: Connect timeout occurred Description: an unhandled exception occurred during the execution of the current web request. P

  Hello

  I deployed a simple asp.net application in a sharepoint wfe Server

  Client 32-bit installed oracle 12

  32-bit Oracle Data Access Components (ODAC)
  with Oracle Developer Tools for Visual Studio

  bit alias 32 and 54 sql set up in all the sharepoit servers to connect to sql server

  SharePoint farm works very well

  ASP.net application to connect to sql server and oracle dbs to get and display the data

  in iis, asp.net application compatible 32-bit and executed under asp.net version 4.0

  When I connect to sql server and a data base of data it displays error below

  ORA-12170: TNS: Connect timeout occurred

  Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and its origin in the code.

  Exception details: System.Data.OleDb.OleDbException: ORA-12170: TNS: Connect timeout occurred

  Source error:

  Line 4142: Dim da2 as new OleDbDataAdapter (sqlStr2, conStr2)
  Line 4143: Dim ds2 As New DataSet
  Line 4144: da2. Fill (DS2)
  Line 4145:
  4146 line: DropDownList38.DataSource = ds2

  Source file: C:\inetpub\wwwroot\wss\VirtualDirectories\lxxxx\xxx.ascx.vb line: 4144

  Stack trace:

  a common cause of Timeout is a firewall on or between customer & dbserver

  What was the last time it worked without error?

  What has changed since then?

• ORA-12170: TNS: Connect timeout occurred on the same host as DB

  Hello

  I just installed Oracle on mu Ubuntu 12.4 following the instructions here:

  http://www.Makina-corpus.org/blog/HOWTO-install-Oracle-11g-Ubuntu-Linux-1204-precise-pangolin-64bits

  and here:

  Install Oracle 11 GR 2 on Ubuntu 12.04 of the databases

  However, when I try to log on to the database, I created during installation using sqlplus, it hangs for a minute or two until it-error:

  ORA-12170: TNS: Connect timeout occurred.

  My tnsnames.ora:

  MYSIS =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = my_host) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = mysids)
  )
  )

  I checked that the listener is running and listening to the post 1521:

  s$ sudo netstat - tulpn | grep 1521

  tcp6 0 0: 1521: * LISTEN 16732/tnslsnr

  $ ps - ef | grep 16732

  Oracle 16732 1 0 06:58?        00:00:00 /opt/oracle/product/11.2.0/dbhome_1/bin/tnslsnr EARPHONE-inherit

  Thoughts?

  Finally managed to do run. The problem was that I have not read rights to tnsnames.ora.

• Cannot download Web site at businesscatalyst host of muse, it shows the connection timeout.

  Cannot download Web site at businesscatalyst host of muse, it shows the connection timeout.

  Hello

  Please see the link below that has the same discussion.

  https://forums.Adobe.com/thread/1934384

  Kind regards

  Vivek

• connect-timeout not honored when custom provider address is used

  My configuration file contains this excerpt:

  <>tcp-initiator

  <>remote addresses

  <-addresses provider >

  < class name - > * name redacted .NET class * < / class name >

  < / provider >

  < / remote-address >

  < connect-timeout > s 5 < / connect-timeout >

  < / tcp-initiator >

  The .NET (application Tangosol.Net.IAddressProvider) class currently resolves to a single address - 127.0.0.1:9101.  This address is not valid, and there is nothing on it to listen.  However, it tries to connect to the remote cache and will sit and wait forever since the timeout period (5 seconds above) is not honored.

  I discovered that by specifying addresses explicitly instead of using a provider:

  <>tcp-initiator

  <>remote addresses

  > the socket address <

  < address > 127.0.0.1 < / address >

  < port > 9101 < / port >

  < / socket-address >

  < / remote-address >

  < connect-timeout > s 5 < / connect-timeout >

  < / tcp-initiator >

  has resulted in a delay of 5 seconds, then a Tangosol.Net.Messaging.ConnectionException is thrown.  It's a good thing, and you like.  The details of the exception are (additional information: could not establish a connection to one of the following addresses: [127.0.0.1:9101]; ensure that the configuration of addresses item "remote control" contains an address and a port of a TcpAcceptor running)

  Why not using my custom .NET class that implements IAddressProvider respect the timeout, I put in the config file?

  (I can post the code for the .NET class that implements IAddressProvider, but I don't think it's relevant)

  Hello

  Your code may be relevant.

  According to the IAddressProvider, you must first return "127.0.0.1:9101", on first convocation NextAddress(), but null during subsequent calls.

  If you come without return "127.0.0.1:9101" of NextAddress(), consistency will loop infinitely try to reconnect to this address.

  Suppliers of custom addresses are quite delicate in their responsibility to manage black lists of rejected addresses and without her infinite reconnect loop is possible.

  Kind regards

  Alexey

• ORA-12170 TNS: Connect timeout occurred

  Hi Experts,

  While trying to connect via TOAD, sqldevloper to my database, I get the following error: -.

  ORA-12170 TNS: Connect timeout occurred

  The listener.ora file content: -.

  [oracle@gdlogidb1 admin] $ cat listener.ora

  listener.ora # Network Configuration file: /mnt/PRDdata/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  LOGDEV =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1525))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1525))(HOST = gdlogidb1.tireco.com))

  )

  LOGDEV =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1525))

  (ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.2.18)(PORT = 1525))

  )

  ADR_BASE_LOGDEV = / mnt/PRDdata/oracle

  The listener status: -.

  [oracle@gdlogidb1 admin] $ lsnrctl status LOGDEV

  LSNRCTL for Linux: Version 11.2.0.2.0 - Production on August 29, 2013 03:13:15

  Copyright (c) 1991, 2010, Oracle.  All rights reserved.

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC) (KEY = EXTPROC1525)))

  STATUS of the LISTENER

  ------------------------

  Alias LOGDEV

  Version TNSLSNR for Linux: Version 11.2.0.2.0 - Production

  Start date August 29, 2013 03:05:32

  Uptime 0 days 0 h 7 min 43 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /mnt/PRDdata/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /mnt/PRDdata/Oracle/diag/tnslsnr/gdlogidb1/logdev/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = EXTPROC1525)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp (PORT = 1525))(HOST=192.168.2.18)))

  Summary of services...

  Service 'logdev.tireco.com' has 1 instance (s).

  "Logdev" instance, State LOAN, has 1 operation for this service...

  Service 'logdevXDB.tireco.com' has 1 instance (s).

  "Logdev" instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  TNSping works fine too.

  [oracle@gdlogidb1 admin] $ tnsping LOGDEV

  AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on August 29, 2013 03:35:14

  Copyright (c) 1997, 2010, Oracle.  All rights reserved.

  Use settings files:

  /MNT/PRDdata/Oracle/product/11.2.0/dbhome_1/network/admin/SQLNET.ora

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = gdlogidb1.tireco.com) (PORT = 1525)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = logdev.tireco.com)))

  OK (0 msec)

  I can connect it is, but the problem occurs when I try to connect using TOAD or Sqldevloper.

  [oracle@gdlogidb1 admin] $ sqlplus system@LOGDEV

  SQL * more: Production of liberation 11.2.0.2.0 Thu Aug 29 03:32:15 2013

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  Enter the password:

  Connected to:

  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit Production

  SQL > user sho

  The USER is 'SYSTEM '.

  Content of the sqlnet.ora: -.

  [oracle@gdlogidb1 admin] $ cat sqlnet.ora

  sqlnet.ora # Network Configuration file: /mnt/PRDdata/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora

  # Generated by Oracle configuration tools.

  NAMES. DIRECTORY_PATH = (TNSNAMES, EZCONNECT)

  ADR_BASE = / mnt/PRDdata/oracle

  My Version of operating system is:- 11.2.0.2.0

  Platform: -.

  Gdlogidb1.tireco.com 2.6.39 - 400.109.4.el6uek.x86_64 #1 SMP Linux kill Jul 22 11:44:00 CDT 2013 x86_64 x86_64 x86_64 GNU/Linux

  Hello

  The error was taken neat but thanks for the reply. The quick fix is to disable the firewall.

  First login as a superuser.

  # service iptables save
# service iptables stop
# chkconfig iptables offe

  Thank you

  Ankur

• How the idle connection timeout attributes in weblogic works?

  Lets say if there is a connection leak in my application that runs on the weblogic Server 10.3.4 and I must find the connection is not closed.
  After going through a documentation I found out that the connection timeout inactive parameter to a positive value can solve this problem.
  With the definition of the attribute preceding the server weblogic will close all connection object that remains inactive for the specified number of seconds, or it is only
  These connection objects that has lost all references to it?
  
  which shows the query by example.
  Lets say I have two con1 con2 & connection objects from a data source defined in the weblogic.
  time-out was set to 10 seconds.
  In a given thread to say con1 performs a db operation and then once, con2 is used for another operation db for more than 10 seconds.
  The con1 object will be always available for the operation of the db, or we take a fresh connection to the pool?
  
  Thank you
  Gordon
  
  Published by: user779368 on May 30, 2011 06:29

  If you are waiting for a query/update complete, it is not idle.
  WebLogic knows you're busy. It is only to have a connection and
  really not using which will cause WLS to resume.

• Customer Oracle TNS connect timeout problems

  Hi all.
  
  I tried to connect the free versions of trial and beta to Benchmark Factory by quest software on my laptop to windows 32-bit on my desk running oracle linux.
  
  With the help of people here, I checked my Oracle database allows incoming connections DB set up server with a routable IP #
  
  The application that I use on my laptop constantly gives me an error ORA-12170: TNS connect timeout...
  
  The following steps have been taken during the installation of the client software...
  
  -------------------------
  1. factory reference download and install
  2 tries to connect to the database on the server machine, but regarldess oracle which has been entered I got a windows error saying not found Oci.dll
  3. I downloaded the zip of Oracle Instant client for 32-bit windows
  4 extract the instant client download files in the bin folder of the reference plant. (this fixes the error not found oci.dll)
  5. When you are using a direct connection, I specified the following details:
  
  Username: linux system user name
  Password: my password of linux
  Host: 192.168.1.9
  Port: 1521
  SID: orcl
  connect as: sysdba
  connect using: Instant customer (it was the only option in a drop down)
  -------------------------------------------
  
  When I try to connect I get the AMT connect timeout error.
  
  Anyone has any ideas what I did wrong or not done?
  
  Any help would be appreciated
  
  Matt
  
  Published by: user9200169 on August 16, 2010 15:53
  
  Published by: user9200169 on August 16, 2010 16:00

  When everything has failed, read the Fine Documentation

  http://www.Oracle.com/technetwork/database/features/OCI/IC-FAQ-094177.html

  "How can I specify the connection in Instant Client mode strings?
  All methods NET naming Oracle does not require the use of ORACLE_HOME or TNS_ADMIN (to locate the configuration such as tnsnames.ora or sqlnet.ora files) work in Instant Client mode. In particular, the connection string can be specified in the following formats:

  A SQL Connect URL string in the form:

  Host: [port] [service name]

  such as:

  dBase-Server - 5:4321 / ORDERS

  As a pair of keyword / value Oracle Net. For example:

  "(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = dlsun242)
  (PORT = 5521))
  (CONNECT_DATA = (SERVICE_NAME = bjava21))) »

  Naming methods that require TNS_ADMIN locate configuration files continue to work if the value of the TNS_ADMIN environment variable.

  If the TNS_ADMIN environment variable is not defined and TNSNAMES entries for example, inst1, are used, the variable ORACLE_HOME must be set, and the configuration files are supposed to be located in the directory of $ORACLE_HOME/network/admin.

  Please note that the ORACLE_HOME variable in this case is only used to locate the Oracle Net configuration files, and any other component of Client Code Library (OCI, NLS and so forth) don't use the value of ORACLE_HOME.

  The adapter unreserved or empty connection strings are not supported. However, another way to use the empty connection string must affect on UNIX TWO_TASK environment variable, or the LOCAL Windows variable, a tnsnames.ora entry or a pair of keyword / value Oracle Net. If LOCAL or TWO_TASK is set to a tnsnames.ora entry, then the tnsnames.ora file must be loaded by setting ORACLE_HOME or TNS_ADMIN.

  "Modified: 8 April 04 Ref #: ID-4428"

• ORA - 12170 - Connection Timeout

  Hello
  
  Problem - I am using TOAD on my computer to connect to my database, but gives the error "Ora-12170, Connection Timeout".
  
  Explanation - I installed Oracle InstantClient 10.2 on the local computer and using this default home home to connect to the target instance.
  Here, the thing is, I can't able to PING to the UNIX machine but cannot able to establish the database connection.
  Made the WAY system LNS_LANG variables...
  Created TNSNAME. ORA in instantClient with appropriate entries.
  
  
  
  Any help is like the wind of heaven... stuck here for a long time...
  Thank you and best regards,
  Madhav
  
  Published by: user13155845 on May 31, 2010 02:48

  oracle client is not installed on your local computer?

  Try this

  Telnet ip_address 1521

  for example

  Telnet 10.200.19.18 1521

• Connection timeout problems

  I have several users using smartview against Essbase, both are V11.1.1.2. They frequently experience connection timeout errors when you try to retrieve reports. WE tried to increase the NetTimeout and the NetDelay on the Essbase server and an increase of agentthreads and a few other parameters configuration of Essbase. SmartView has been configured to allow up to 20000 lines, although these queries return no more than a few hundred lines of data. Session time is set to 60 minutes. This implementation uses Websphere. Can someone suggest setting changes to stop this error from happening? Matt? Mike?

  They can run in a HTTP timeout error.

  You can get all the details of how solve it here - http://support.microsoft.com/kb/813827

• Consistency * extend the connection timeout

  I have consistency on Bluemix cluster. I want to add support for consistency * Extend. I add proxy-game on cluster BLuemix (I'm using private IP addresses), then I add while instruction -https://docs.oracle.com/cd/E15357_01/coh.360/e15726/gs_example.htm#COHCG4921 on the client (here I use public Bluemix IP of the cluster consistency). Then, I use query.sh for consistency on a client to test the connection. But on the cluster, I see in the newspapers that coherence listen connections on port 9099, on client - the client tries to connect to this port for cluster consistency. But I 'Timeout' on the client.

  Is it possible to use coherence * extend my goal or I need to use REST services or something else?

  To do this Bluemix should be transfer traffic from the public to the private IP address.  Probably there is a way to configure Bluemix to support that.  I suggest you only start by checking that query.sh can reach the IP address within the same box, allowing to validate that you have properly setup of the proxy and the client.  Once that works, you can work to get Bluemix with the appropriate routing.  Note I've never used bluemix, but I presume that is such a feature of common transmission.  Alternatively, if the the machine proxy shows both the private and public IPs as IPs local to the machine, you could configure the proxy for listening on the public IP (rather then private).  Finally if you are exposing a proxy publicly, you may want to focus on securing the power of Attorney in order to limit what outside customers to the data stored in the cluster.

  Thank you

  Mark

  The Oracle coherence

• Connection timeout error

  MMacBook Pro running Yosemite 10.10.5

  Unable to connect to my wifi, all other devices are connecting without problems. I take the wifi of my owner so I don't have real access to the router. I think I accidentally created a computer-to-computer network that may have taken the same channel as the WiFi back. (I know that the signal is out because she's going to tell me if the password is incorrect).  I have tried everything to reset preferences, System deleted with no luck. Need to know the next step, if someone had the same problem.

  Please take each of the following steps that you have already tried, until the problem is resolved. Some of these steps are only possible if you have a control on the wireless router.

  Step 1

  Disable Wi - Fi and turn it back on.

  Step 2

  Restart the router and the computer. A lot of problems is solved in this way.

  Step 3

  Change the name of the wireless network, as appropriate, to eliminate all characters other than letters and numbers. Do you on your router via its web page, if this isn't an Apple device, or via AirPort Utility, if it is an Apple device.

  Step 4

  Run the Network Diagnostics .

  Step 5

  In OS X 10.8.4 or later, run Wireless Diagnostics and fix the issues contained in the summary, as appropriate.

  Step 6

  Back up all data before proceeding.

  Launch the Keychain Access application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Enter the name of your network wireless in the search box. You should have one or more items password"AirPort network" with this name. Make a note of the name and password, and then delete all the items. Quit Keychain Access. Turn off Wi - Fi and then turn it back on. Reconnect to the network.

  Step 7

  You may need to change other settings of the router. See guidelines below the link:

  Recommended settings for the WiFi routers and access points

  Potential sources of interference

  Step 8

  Take note of all your parameters of the Wi - Fi connection in the network preferences pane, then remove the connection in the connection list and re-create it with the same settings. This by clicking on the icon of the lowest sign from the list of connection, select Wi - Fi as the interface in the form that opens. Select join the other network in the network name menu, then select your network. Enter the password when you are prompted, and then save it in the keychain.

  Step 9

  Reset the controller (SMC) system management.

• Satellite A100 - 003 WLAN (with WPA - PSK) connection timeout

  I have a laptop Satellite A100-003 with preinstalled in Windows Vista.
  When I try to connect to my router with WPA - PSK (TKIP) I have error:
  Wireless authentication failed because of a time-out.
  My laptop and the router configured properly! I installed the new drivers intel 3945ABG chip.
  WPA2-PSK and WEP are working very well.

  Hello

  The same thing happened on my old laptop.
  I was not able to establish the WiFi connection for more than 1 min with WPA encryption.
  I downloaded the latest Atheros driver and updated everything.
  Everything works very well with WEP but not WPA.

  Then I disabled the option to clean Windows configuration and use the Atheros utility. Now everything works fine!
  I recommend using the Intel Proset utility and check all the possible settings!