Series 5300 MCUS are supported by the flexible port configuration?

Hi all

I could not find a guide to the administrator or something for the MCU5300 series. I want to learn if the ports are flexible or not. You know that it supports up to ports 20HD or 40SD. Is it possible to make this support 10HD and 20 ports SD at the same time as Polycom RMXes? Or do I have to choose a mode (HD or SD) and to use them only in this mode?

Best regards

Chambers oumar

From what I understand, it is the characteristics of the MSE8510 in a standalone MCU.

On the MSE8510 is not possible, then I say:

No, it is not possible to have a flexible port configuration.

So yes, it is a fixed parameter.

Here, some more old, posting on the MSE8510:

https://supportforums.Cisco.com/thread/2132414

Tags: Cisco Support

Similar Questions

Which 3D glasses are supported for the Toshiba 40TL838 TV

Hello

I'm looking for a support in the 3D glasses choose for my Toshiba TV 40TL838.
The TV this 2 models of sunglasses product page (FPTAG01G / / FPTAG02G) but there are more models now available in stores (i.e.FPT - AG03).

Can you please advise if all Toshiba active 3D glasses works perfectly with my TV or should I stick to these 2 models from the product page?

Hello

Active Shutter of Toshiba FPT-AG02G 3D glasses are compatible and taken in charge.
I guess the FPT-AG02G is a successive generation of model FPTAG01G

Cryptographic cards are allowed on the Ethernet ports

I want to set up encryption between E0 on RouterA and E0 on RouterB. Is this possible?

RouterA and RouterB are related through the ports series (T1) or dial-up connections (ISDN, POTS) and are never on the same ethernet connection.

Intermediate links between RouterA and RouterB change regularly and frequently in my portable environment.

When I apply a cryptographic card to an ethernet port, it seems to crash the router, part of the traffic goes thru, but I lose telnet.

I use 2520 s and 4500's

Any ideas?

Thank you

Mark Matthias CCNA, CNA, CNE, MCP

The card encryption should be applied to the port outgoing (port facing the other peer router). You apply the encryption card to T1 and ISDN/POTS interfaces and define your ACL crypto to encrypt traffic between subnets ethernet.

The KVM Port configuration series B

Hello team,

Is it possible to change the KVM Port for servers UCS B-Series?

I used WireShark to check that access KVM for B-Series use the same default port as UCS C-Series (2068). I found the instructions for changing port KVM for C-series. However, I have found no documentation on the change of this value for B-Series.

The CLI of the UCS, I tried searching orders local-mgmt thus brought to the system, fabric interconnects and individual blades, but I still could not find something.

Thank you

Trevor

Trevor,

Given that the KVM is NAT would be through the management interface of the FIs, we do not allow the port to change on the B series.

Kind regards

Robert

Data NMEA which are received on the serial port, when the system starts causes windows 7 to interpret these data as a serial ballpoint mouse and moves the cursor jumping around.

I know this question was asked several times before, but the solutions proposed, such as changin the registry does not help. It changes by itself. In the configuration that I have in my boat, the stream of NMEA data is directly injected into the COM port so no driver is necessary. It's a problem easily solved in windows XP, why is it so difficult in W7? There must be a way to permanently disable the plug-and-play driver load. I found this program that works only for Vista, if I understand correctly: http://www.stentec.com/en/download-freeware COM port plug & play blocker. If something similar could be provided by MS for W7, it would be very good...

It turns out that the program at the port of Stentec COM (freeware) http://www.stentec.com/en/download-freeware care & play blocker, also works in W7. I don't know how it works, but it does, and it's good for me! It also works for the virtual serial ports.

DataGuard problems, bad to the log_archive_dest_2 port configuration
Hello! Thank you all in advance for your help and sorry for my English, I will try to explain as best as possible.

We have a dataguard.

It has two headphones, the ports are 1534 and 1544, but... someone changed their 1535 once there is and now I had to re-set up everything again.

The thing is log_archive_dest_2 at the elementary level is wrong, because it points to instead of 1534-1535. I tried to edit init.ora and restart the instance but it always points to 1535 again.

I don't know if this setting depends on the other, or there is a hidden configuration, I don't see

**********
Primary
**********
-----------------------------------------------------------------------------------------------------------------------------------------
tnsnames.ora

LICITARP =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1544))(HOST = server01g))
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server01))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = LICITARP)
)
)

LICITARR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = server02g. XXXXXX.es) (PORT = 1544))
(ADDRESS = (PROTOCOL = TCP) (HOST = server02. XXXXXX.es) (PORT = 1534))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = LICITARR. XXXXXX.es)
)
)

LICITARP. XXXXXX.es =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01. XXXXXX.es) (PORT = 1534))
)
(CONNECT_DATA =
(SID = LICITARP)
(SERVER = DEDICATED)
)
)

LICITARPG. XXXXXX.es =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01g. XXXXXX.es) (PORT = 1544))
)
(CONNECT_DATA =
(SID = LICITARP)
(SERVER = DEDICATED)
)
)

LICITARR. XXXXXX.es =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP) (HOST = server02. XXXXXX.es) (PORT = 1534))
)
(CONNECT_DATA =
(SID = LICITARR)
(SERVER = DEDICATED)
)
)

L_LICITARPG =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01g. XXXXXX.es) (PORT = 1544))

L_LICITARP =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01. XXXXXX.es) (PORT = 1534))

-----------------------------------------------------------------------------------------------------------------------------------------
Listener.ora

SID_LIST_L_LICITARPG =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
)

L_LICITARP =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01. XXXXXX.es) (PORT = 1534))
)
)
L_LICITARPG =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = server01g. XXXXXX.es) (PORT = 1544))
)
)

SID_LIST_L_LICITARP =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARP. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)

-----------------------------------------------------------------------------------------------------------------------------------------
parameters

My ora init settings:

LICITARP.log_archive_dest_1 ='location = "USE_DB_RECOVERY_FILE_DEST" ',' valid_for = (ALL_LOGFILES, ALL_ROLES)'"
LICITARP.log_archive_dest_2 ='service = "LICITARR.xxxxxx.es ', delay LGWR SYNC AFFIRM = OPTIONAL compression 0 = DISABLE max_failure = 0 max_connections = 1 reopen = 300 db_unique_name ="LICITARR"net_timeout = 30 valid_for = (online_logfile, primary_role)'" "

I start the database and when I show the parameters, log_dest_2 points to 1535, a bad port.

SQL > show settings dest

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
audit_file_dest string/opt/oracle/admin/LICITARP/adu
MP
/ opt/oracle/diag/rdbms/licitar string background_dump_dest
p/LICITARP/trace
core_dump_dest string/opt/oracle/diag/rdbms/licitar
p/LICITARP/cdump
db_create_file_dest chain
db_create_online_log_dest_1 string
db_create_online_log_dest_2 string
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_create_online_log_dest_5 string
db_recovery_file_dest string/opt/oracle/oradata/flash_reco
very_area
whole large db_recovery_file_dest_size 100G
diagnostic_dest string/opt/oracle
Log_archive_dest chain
location of string Log_archive_dest_1 = 'USE_DB_RECOVERY_FILE. '
Dest", valid_for is (ALL_LOGFIL
ES, ALL_ROLES)
LOG_ARCHIVE_DEST_10 string
service of string LOG_ARCHIVE_DEST_2 = "(DESCRIPTION = (ADDRESS

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
_LIST = (ADDRESS = (PROTOCOL = tcp
() (HOST = server02)(¡¡¡PORT=1535!!!)))
(CONNECT_DATA = (SERVICE_NAME = LI
CITARR. XXXXXX.es)(SERVER=DE)
DIQUE))) ', LGWR SYNC DISPLAY.
Delay of RM = 0 OPTIONAL compressio
n = DISABLE max_failure = 0 max_co
nnections = 1 reopen = 300 db_un
ique_name = "LICITARR" net_timeo
UT = 30 valid_for = (online_logfi
the, primary_role)

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
log_archive_dest_3 string
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
log_archive_dest_state_1 string ENABLE
allow the chain of log_archive_dest_state_10
LOG_ARCHIVE_DEST_STATE_2 string ENABLE
log_archive_dest_state_3 string ENABLE

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
allow the chain of log_archive_dest_state_4
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
log_archive_duplex_dest string
log_archive_min_succeed_dest integer 1
standby_archive_dest channel? / dbs/arch
user_dump_dest string/opt/oracle/diag/rdbms/licitar
p/LICITARP/trace
SQL > show fal settings

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
string fal_client (DESCRIPTION = (ADDRESS_LIST =)
Address = (Protocol = TCP) (Host = FL
o5ora01) (port = 1534))) (CONNECT_
DATA = (SERVICE_NAME = LICITARP. XX
XXXXXX.es) SERVER = DEDICATED))
string fal_server (DESCRIPTION = (ADDRESS_LIST =)
Address = (Protocol = TCP) (Host = f
lo5ora02) (port = 1534))) (CONNECT
DATA = (SERVICENAME = LICITARR.) X
XXXXX.es) (SERVER = DEDICATED)
)

**********
Standby
**********
-----------------------------------------------------------------------------------------------------------------------------------------
tnsnames.ora

LICITARR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SID = LICITARR)
)
)

LICITARR
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
(CONNECT_DATA =
(SID = LICITARR)
(SERVER = DEDICATED)
)
)

L_LICITARR =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))

LICITARR. XXXXXX.ES =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
(CONNECT_DATA =
(SID = LICITARR)
(SERVER = DEDICATED)
)
)

-----------------------------------------------------------------------------------------------------------------------------------------
Listener.ora

SID_LIST_L_LICITARRG =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARPG. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARRG. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARPG_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARPG_DGB. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARRG_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARRG_DGB. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)

SID_LIST_L_LICITARR =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARPG. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR_dgmgrl. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARRG. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARP_DGB. XXXXXX.es)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR_dgb. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SERVICE_NAME = LICITARR_DGB. XXXXXX.es)
(SID_NAME = LICITARR)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARP. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARP)
)
(SID_DESC =
(GLOBAL_DBNAME = LICITARR. XXXXXX.es)
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)

L_LICITARR =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)
)

L_LICITARRG =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1544))(HOST = server02g.intranet.XXXXXX.es))
)
)

LISTENER_LICITARR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP (PORT = 1534))(HOST = server02.intranet.XXXXXX.es))
)

SID_LIST_LISTENER_LICITARR =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = / opt/oracle/product/db111)
(SID_NAME = LICITARR)
)
)

-----------------------------------------------------------------------------------------------------------------------------------------
parameters

SQL > show settings dest

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
audit_file_dest string/opt/oracle/admin/LICITARR/adu
MP.
/ opt/oracle/diag/rdbms/licitar string background_dump_dest
r/LICITARR/trace
core_dump_dest string/opt/oracle/diag/rdbms/licitar
r/LICITARR/cdump
db_create_file_dest chain
db_create_online_log_dest_1 string
db_create_online_log_dest_2 string
db_create_online_log_dest_3 string
db_create_online_log_dest_4 string

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
db_create_online_log_dest_5 string
db_recovery_file_dest string/opt/oracle/oradata/flash_reco
very_area
whole large db_recovery_file_dest_size 100G
diagnostic_dest string/opt/oracle
Log_archive_dest chain
Log_archive_dest_1 string LOCATION = USE_DB_RECOVERY_FILE_
DEST OPTION REOPEN = 300
LOG_ARCHIVE_DEST_10 string
service of string LOG_ARCHIVE_DEST_2 = "(DESCRIPTION = (ADDRESS
_LIST = (ADDRESS = (PROTOCOL = tcp

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
() (HOST = server02)(PORT=1534)))
(CONNECT_DATA = (SERVICE_NAME = LI
CITARR. XXXXXX.es)(SERVER=DE)
DIQUE))) ', LGWR SYNC DISPLAY.
Delay of RM = 0 OPTIONAL compressio
n = DISABLE max_failure = 0 max_co
nnections = 1 reopen = 300 db_un
ique_name = "LICITARR" net_timeo
UT = 30 valid_for = (online_logfi
the, primary_role)
log_archive_dest_3 string

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
log_archive_dest_4 string
log_archive_dest_5 string
log_archive_dest_6 string
log_archive_dest_7 string
log_archive_dest_8 string
log_archive_dest_9 string
allow the chain of log_archive_dest_state_1
allow the chain of log_archive_dest_state_10
LOG_ARCHIVE_DEST_STATE_2 string ENABLE
log_archive_dest_state_3 string ENABLE
allow the chain of log_archive_dest_state_4

VALUE OF TYPE NAME
------------------------------------ ----------- ------------------------------
allow the chain of log_archive_dest_state_5
allow the chain of log_archive_dest_state_6
allow the chain of log_archive_dest_state_7
allow the chain of log_archive_dest_state_8
allow the chain of log_archive_dest_state_9
log_archive_duplex_dest string
log_archive_min_succeed_dest integer 1
standby_archive_dest channel? / dbs/arch
user_dump_dest string/opt/oracle/diag/rdbms/licitar
r/LICITARR/trace

------------------------------------------------------------------------------------------------

If I tried that I managed to enter sqlplus in both nodes

[oracle@server01 admin] $ sqlplus "sys/YYYYYYY @(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = server02)(PORT=1534)) (CONNECT_DATA = (SERVICE_NAME = LICITARR.» "((XXXXX.es)(SERVER=DEDICATED) (CID = (PROGRAM = oracle) (HOST = server02)(USER=oracle))) as sysdba.

SQL > select status from v$ instance;

STATUS
------------
MOUNTED

[oracle@server01 admin] $ sqlplus "sys/YYYYYYY @(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp) (HOST = server01)(PORT=1534)) (CONNECT_DATA = (SERVICE_NAME = LICITARP.» "((XXXXX.es)(SERVER=DEDICATED) (CID = (PROGRAM = oracle) (HOST = server01)(USER=oracle))) as sysdba.

SQL > select status from v$ instance;

STATUS
------------
OPEN

I always get this message, where PORT = 1535 is incorrect, and the correct port is 1534:

Message
--------------------------------------------------------------------------------
R.XXXXX.es) (SERVER = DEDICATED)))'

LGWR: Impossible to archive log 2 thread 1 sequence 162530 (12514)
ARCH: Starting to check in thread 1 sequence 162529 (13127536-13127548)
ARCH: Completed check-in thread 1 sequence 162529 (13127536-13127548)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'

LGWR: Impossible to archive log 3 thread 1 sequence 162531 (12514)

Message
--------------------------------------------------------------------------------
ARCH: Starting to check in thread 1 sequence 162530 (13127548-13127555)
ARCH: Completed check-in thread 1 sequence 162530 (13127548-13127555)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'

LGWR: Failure to archive journal 1-wire 1 sequence 162532 (12514)
ARCH: Starting to check in thread 1 sequence 162531 (13127555-13127565)
ARCH: Completed check-in thread 1 sequence 162531 (13127555-13127565)
Logging of 12514 errors received on the eve

Message
--------------------------------------------------------------------------------
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'

LGWR: Impossible to archive log 2 thread 1 sequence 162533 (12514)
ARCH: Starting to check in thread 1 sequence 162532 (13127565-13127570)
ARCH: Completed check-in thread 1 sequence 162532 (13127565-13127570)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'

Message
--------------------------------------------------------------------------------

LGWR: Impossible to archive log 3 thread 1 sequence 162534 (12514)
ARCH: Starting to check in thread 1 sequence 162533 (13127570-13127575)
ARCH: Completed check-in thread 1 sequence 162533 (13127570-13127575)
Logging of 12514 errors received on the eve
"LGWR: 12514 error creating file archivelog ' (DESCRIPTION = (ADDRESS_LIST = (ADDRESS
(S = (Protocol = TCP)(Host=Server02) (port = 1535))) (CONNECT_DATA = (SERVICE_NAME = LICITAR
R.XXXXX.es) (SERVER = DEDICATED)))'

LGWR: Failure to archive journal 1-wire 1 sequence 162535 (12514)
ARCH: Starting to check in thread 1 sequence 162534 (13127575-13127582)

Message
--------------------------------------------------------------------------------
ARCH: Completed check-in thread 1 sequence 162534 (13127575-13127582)
Logging of 12514 errors received on the eve

256 selected lines.

Those for alert and new PORT = 1535 when he is wrong, since the correct port is 1534:

***********************************************************************

Fatal OR connect 12514 error, connect to:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=server02) (PORT = 1535)) (CONNECT_DATA = (SERVICE_NAME = LICITARR_DGB. XXXXX.es)(INSTANCE_NAME=LICITARR) (SERVER = DEDICATED) (CID = (PROGRAM = oracle) (HOST = server01)(USER=oracle)))

VERSION INFORMATION:
AMT for Linux: Version 11.1.0.7.0 - Production
Protocol TCP/IP NT to Linux adapter: 11.1.0.7.0 - Production Version
Time: November 10, 2011 18:56:42
Tracing not lit.
AMT error struct:
NS main err in code: 12564

AMT-12564: TNS:connection refused
NS secondary err code: 0
NT main err in code: 0
NT secondary err code: 0
NT OS err code: 0

***********************************************************************

Fatal OR connect 12514 error, connect to:
(DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=server02) (PORT = 1535)) (CONNECT_DATA = (SERVICE_NAME = LICITARR_DGB. XXXXX.es)(INSTANCE_NAME=LICITARR) (SERVER = DEDICATED) (CID = (PROGRAM = oracle) (HOST = server01)(USER=oracle)))

VERSION INFORMATION:
AMT for Linux: Version 11.1.0.7.0 - Production
Protocol TCP/IP NT to Linux adapter: 11.1.0.7.0 - Production Version
Time: November 10, 2011 18:56:42
Tracing not lit.
AMT error struct:
NS main err in code: 12564

AMT-12564: TNS:connection refused
NS secondary err code: 0
NT main err in code: 0
NT secondary err code: 0
NT OS err code: 0

I have recreated the password file in the primary and copy it to the secondary, after that I restarted both cases, but nothing
No sense to me. Do you have a rebuild on my system and was not able to reproduce.

At this point, I would like to grep for the problem (change of wider path if necessary)
```
grep 1535 -R /opt/oracle/*
```
I hate when it makes no sense. There must be somewhere.

Best regards

mseberg

Subsequently

I was thinking about it more. If you have a data broker, they can change the database settings. Any change of this?

I see this in your settings file that supports this theory
```
*.dg_broker_start=TRUE
```
Any set of values in Data Guard Broker wins the spfile parameter. So no matter what you the SPFILE and PFILE broker file overwrites.

How to remove safely a Data Guard Broker Configuration [261336.1 ID]

Or modify the 'StaticConnectIdentifier' proposal the data broker. See doc Oracle E17023-04

"6 scenarios using the DGMGRL command-line Interface"

Example of
```
DGMGRL> edit instance dg112i2 on database dg112i_prm set PROPERTY StaticConnectIdentifier = '(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.11.225)(PORT=1555))(CONNECT_DATA=(SERVICE_NAME=DG112I_PRM_DGMGRL.au.oracle.com)(INSTANCE_NAME=dg112i1)(SERVER=DEDICATED)))';
```
Published by: mseberg on November 11, 2011 13:53

See data physical custody shall 11.2 primary RAC RAC standby using a second network [1349977.1 ID]

This replacement of hard drives are supported by the Satellite P30?

Hello
My P30 came with a HARD disk that rotates at 4500 rpm of 80 GB. I really need a floppy that can write and access data fast enough for video editing (rendered) and multi track audio recording.

Are there alternative products that can improve the performance of my computer? I have already ordered 2 GB of RAM.
Would a Hitachi Travelstar 7K 100 works with my device?

I guess you mean the Hitachi Travelstar 7K 100 100 GB drive HARD 7200 RPM 8 MB cache 2, drive HARD 5Zoll.
I think you can use the HARD disk with the following properties:

hard drive 9.5 mm with capacity 30 GB/40 GB/60 GB / 80 / 100GB / 120GB
Bus Master IDE
Support 100 synchronous DMA Ultra

Disk HARD 7200prm will produce more heat but perhaps the laptop could handle this. Otherwise you will get some overheating shutdown downs.

Not ReiserFS are supported on the Toshiba NB100

Hello world

I recently had a new Toshiba NB100 (netbook) with Ubuntu installed Remix (hardy, uname - r = 2.6.24 - 19-lpia).

The problem I have is that it does not support reiserfs volume (disk usb in my case) and I couldn't find the way to solve. The only available with the string 'reiserfs' package is 'reiserfsprogs' (already installed).

I realized that resierfs module has not yet built on architecture 'lpia '.

Is this correct? Any solution?

Thanks in advance
Stone

http://UbuntuForums.org/ can provide a response

Routers are supported by the Time Machine feature?

Hello!

I am looking for a router that supports the feature Time Machine for someone else. Now, I know that the Nighthawk R7000 router doing since I was able to find a tutorial on the Internet. The X 6 as R8000 is apparently too much. Is there a list that shows all routers compatible with Time Machine or do I really get random routers and check their manuals to determine if they support Time Machine? No doubt the right of the latter?

Thank you very much!

Benjamin

Hi @Chosenusername

Welcome to the community!

Most of the newer model will support this feature, but it is also best to check their precision manuals.

Thank you!

What features are supported on the OS 4.0 browser?

I'm just starting development of web pages on the Blackberry platform. Our target more common denominator is OS 4.0.0.160. Can someone point me to a resource documenting the features of the browser of this platform? Supported version support, CSS, DOM scripting/AJAX JS, etc.. I did a search and no success for it.

Thank you!

Matt Perkins

Able to find it here. Looks like has participated in a section of archive and goes backward to 3.2!

http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe?func=LL&objid=8563&objAction=browse&sor...

now, to get the Simulator to work.

Tecra S1 and drive external hard usb 2.0 are supported in the BACK

I use Norton Ghost 2003 and Maxtor 200 GB USB 2.0 external drive to store my image.

I need boot BACK to start from floppy or cd and recognize my external drive before restoring my image with ghost.

My Tecra S1 use bios 2.40 and my external drive is not recognized under dos.

Other mobile third-party, everything works fine.

In this forum, someone else has the same problem.

Anyone can help us?

Thanks in advance

Gaetan

Hello

Maybe this helps you, the Tecra S1 has an Intel 855 PM chipset.

If you google around you can find a BACK based USB driver and storage of mass for your chipset.

Bye Bob

Are the XQuery functions that are supported in the path of a function XMLTable clause?
Hello

Oracle 11.2, can I use XQuery functions in the path of a function XMLTable clause? I tried, but does not fit any result. Here is an example with and without the function fn:lower-case():

SQL >
SELECT EVENT_ID, ACTION
OF EVENTSCHEMA.event x,.
XMLTABLE ('/ *' from EVENTXMLTEXT)
COLUMNS
PATH varchar (10) ACTION ' / * / action'
);

EVENT_ID ACTION
------------- -----------
1000 OBSERVE
1001 OBSERVE

SQL >
SELECT EVENT_ID, ACTION
OF EVENTSCHEMA.event x,.
XMLTABLE ('/ *' from EVENTXMLTEXT)
COLUMNS
ACTION varchar (10) PATH "fn:lower - case(/*/action)".
);

EVENT_ID ACTION
------------- -----------
1000
1001

At the end of the day, I will generate lines such as

PATH of char (1) INFERRED ' if (fn:upper - case(/*/cah:extension/cah:inferred) = 'TRUE') then if "t" ElseIf (fn:upper - case(/*/cah:extension/cah:inferred) = 'FALSE') then 'f' not null'.
PATH of TIMESTAMP BIZTRANSACTIONDATE "fn:adjust - dateTime-to-timezone(/*/cah:extension/cah:bizTransactionDate).

but they also return null. If I remove the XQuery functions in them, they work.

Do you know what could be the problem here?

Thank you!
-Daniela
Works for me:
```
SQL> with my_sample_table as (
  2    select xmltype('
  3    MONDAY
  4    TUESDAY
  5    WEDNESDAY
  6    TUESDAY
  7    FRIDAY
  8    SATURDAY
  9    SUNDAY
 10  ') xmldoc
 11    from dual
 12  )
 13  select x.*
 14  from my_sample_table t
 15     , xmltable(
 16        '$d/days/day'
 17        passing t.xmldoc as "d"
 18        columns day varchar2(30) path 'if (string-length(.)>6) then lower-case(.) else (.)'
 19       ) x
 20  ;

DAY
------------------------------
MONDAY
tuesday
wednesday
tuesday
FRIDAY
saturday
SUNDAY

7 rows selected
 
```
Do you know what could be the problem here?

Please post an example of XML document.

HP ENVY 17-n107na: resolution taken Maximum supported by the HP Envy 17's HDMI output

Hello

I see in the specifications document of rechnical HDMI laptop HP Envy 17-n107na version is 1.4.

My question is can I use the HDMI port to connect my laptop to a monitor with a resolution of up to 2560 x 1440?

Or the maximum resolution supported by the HDMI port only 1080 p?

Thank you

Hello

No, its maintenance and Service Guide page #3:

HDMI version 1.4 support 1920 × 1200 @ 60 Hz

Source: http://support.hp.com/us-en/product/HP-ENVY-17-Notebook-PC-series/8499288/model/8903915/manuals

Kind regards.

"Another computer on the network has the same IP address as this computer. Contact you network administrator for help resolving this issue. More details are available in the Windows system event log"

Please, anyone can help as I don't know what to do? I am running Vista to the Windows Welcome page
I am the administrator and I have no other computers attached to my laptop?
I use the same USB port to connect to internet, but recently, I had to try another USB port I get the above error message.
I have no idea how to do to correct the situation and would appreciate guidance step by step.
Thank you.

Hi RDCICON,

1. which device you are connected to the USB port?

2. you still get the same message when you connect the usb device or use the device on another computer?

Method 1:

You can try to run the tool built into Vista Network Diagnostics. To do this, click Start, go to network and select network share.

On the left side of the window select the diagnosis and repair.
It should help to find which device is listed with the duplicate IP address.

Method 2: Release and renew the IP address by following these steps.

a. Click Start. Click Run, type cmd, press ENTER.

b. at the command prompt, type the following command and press ENTER

ipconfig/release

ipconfig / renew

Method 3:

Check and confirm the DHCP client service is started and set to automatic.

If the DHCP client service is not running, then set it to autostart. Steps to set the auto service:

a. click the Start button

b. type services.msc in the search box.

c. search for DHCP client and set it to automatic and make sure that it is started.

Method 4:

Reset the router and see if the problem persists.

You can refer to the 3mentioned of general troubleshooting method in the following article to reset the router.

http://support.Microsoft.com/kb/956196#Gm3

You can also see the producers of the router manual or contact support for additional assistance.

Hope this information is useful.

Operations supported by the CMIS connector

I was wondering what all the operations defined by CMIS, are supported by the CMIS connector that comes with Drive esp. 2.1 of Windows Explorer. When I right click in Windows Explorer, the player context menu only gives these options - Check, Check, check out Cancel, Show versions and connect to. But the tech note to CMIS connector says that we can even rename a folder, create a new folder (and some more) by selecting options in the context menu. I believe that those who are certainly no options provided by Windows, but should be in the disc menu.
Some clarification would help greatly.
Thank you.

Hello

For the "Rename", "new folder" you mentioned, Adobe Drive indeed is based on the provided context menus explore in Windows and the Mac OS Finder. In addition to these menus, Adobe Reader also supports 'copy', 'paste', 'delete', the contextual menus etc provided by OS.

Thank you

Zhiqiang

Series 5300 MCUS are supported by the flexible port configuration?

Similar Questions

Maybe you are looking for