Series Xperia Z5 + 6 Android: no connection to SDXC mass storage?

Similar Questions

• Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection

  Why doesn't my computer series sony vaio y cannot detect / connects to a wireless connection. only through connection cable/usb... Please help me... Thank you...

  Hi JaqD,
  to go with that said Brian, more in detail the best options, we can give you.
  In the meantime, here are some generic troubleshooting steps:
  http://support.Microsoft.com/kb/313242

• Rooting Xperia Pro with Android 4.0.4

  My dear a post please process for rooting Xperia Pro with Android 4.0.4 (official Sony firmware)

  Thanks in advance.

• QX100 supports Android 4.3? I have a Note 3 with Android cannot connect to QX100 4.3?

  QX100 supports Android 4.3? I have a Note 3 with Android cannot connect to QX100 4.3. I continue to connect and their time.

  Here is the solution to stop the QX100 unplug with your smartphone android 4.3:

  1. go to settings

  2. select Wi - Fi

  3. press and hold the DIRECT-XXXXSC-QX100

  4. select Modify network config

  5 click on show advanced options

  6 make the following changes:

  Proxy settings: None

  IP settings: static

  IP address: 10.0.1.2

  Gateway: 10.0.0.1

  Network prefix length: 24

  DNS 1:                               10.0.0.0

• How to configure the bluetooth with Kyocera android phone connection to share photos, music & video files

  Original title: Windows 8 Configuration bluetooth with Kyocera android phone?

  Configuration of bluetooth of Windows 8 with Kyocera android phone?  I got a laptop with bluetooth Tech. How can I set up a connection and share photos, music & video files?

  Hey GQ - Jon'Jon,.

  Make sure that Bluetooth is enabled on the computer as well as your Kyocera android phone.

  Make sure that the phone is paired with your computer.

  For information about how to configure the Bluetooth with Kyocera android phone connection to share photos, music & video files, it would be better if get you in touch with Kyocera phone support for assistance. Please see the support link:

  http://www.Kyocera-Wireless.com/support/phone/

  Please feel free to respond if you face problems with Windows in the future.

• "This USB mass storage device can transfer information faster if you connect it to a USB 3.0 port Superspeed ' when the device is already connected to a USB 3.0 port.

  I just bought and installed a USB 3.0 card. It is the Startech PEXUSB3S2 PCIe card. I installed the card in a PCIe 2.0 X 1 slot. The manual says it's exactly the slot, that it supports.

  The Manager device displays NEC Electronics USB 3.0 Host Controller and NEC Electronics USB 3.0 Root Hub are installed and are working correctly. I have a Thermaltake BLACX5G 5 G USB 3.0 hard drive caddy. The transfer rate is only 35 MB/s using the HDTune benchmark. It is a USB 2.0 speed.

  When the player is turned on, windows displays the message "this USB mass storage device can transfer information faster if you connect it to a Super speed USB 3.0 port»

  For some reason, the system doesn't see the caddy to drive USB 3.0 as being plugged into a USB 3.0 port, when it actually is.

  I remember having this same problem with Windows XP, when I bought a USB 2.0 card. The only thing that fixed it at the time was upgraded to XP SP2.

  This should not be a problem because I know that Windows 7 pro 64-bit supports USB 3.0.

  My motherboard is an ASUS P5QL-EM support an Intel Core 2 Quad and 4 GB of DDR2 memory. According to the manual owner the PCIe x 1 slots support architecture 1.0 and 2.0.

  Edit: I just tested the external hard drive and expansion card USB 3.0 on my motherboard Gigabyte of friends running Windows XP. Everything worked perfectly, no problems at all.

  Here, there is a problem with Windows 7 or the motherboard. Still unresolved, currently installs a floppy drive so I can update the firmware of my motherboard.

  I checked the implementation of the card several times, removed and installed in another motherboard to test, then removed and reinstalled again in my motherboard ASUS check several times for a fit course.  It still does not work. I have just completed update the firmware of the motherboard with the latest version, and I also did a new install of Windows 7, install the drivers USB 3.0 immediately after installing Windows over. None of this solves the problem.

  I'm running out of ideas on how to fix this without doing something drastic as a replacement for my motherboard. I don't want the speed of USB 3.0, but I don't think I'm ready for an another two or three hundred dollars to get it.

  I've been all over the ' net trying to find a solution and read tons about USB USB 3.0 specifically and in general. I can find no reason why the drivers would install and report that they are working correctly, but fail to connect to 3.0 speeds. I think that this would generate a certain type of error instead of such a strange symptom.

  EDIT:

  Here go us. I knew that is was a bad idea to buy one main (ASUS P5QL-EM) card that had to be overclocked to 1066 MHz for DRAM memory. I did all this work, and every time I reset my BIOS or updated it would always be the frequency DRAM back to where it should be (1066). After a reset of the computer was the starter and I just let it start instead of setting the DRAM frequency and, suddenly, USB 3.0 card worked perfectly. I confirmed this by setting the frequency to 1066 and looking at the USB 3.0 card fail again. I guess it must have something to do with the clock being sent to the PCIe bus.

  In any case, the USB 3.0 card works perfectly and gives me a transfer rate HD Tune to 99 MB/s on a drive from WD SATA 7200 RPM and 86.1 Mbps on a Samsung drive hard 5400 RPM / MIN 3,5 "SATA. These are the same reference points I get when these drives are connected to my internal SATA connectors. I'd say USB 3.o works perfectly now and maxing out the hard drives performance.

  Thanks for any help.

• Any old Android can connect Bluetooth to my imac, why my iPhone 6 cannot? !!

  I am SUPER frustrated and annoyed by this question. My iPhone 6 unable to connect bluetooth to anything. Why Apple did not find that. Any old cheap android phone can connect to what whether bluetooth but my dear super high-tech iPhone 6 can't, why? Since 2013 and perhaps earlier, I had this problem with iPhones, something so simple, so helpful, and Apple may not understand it. Come on!! I am really annoyed on this issue! PLEASE DO SOMETHING QUICK! SOLVE THIS PROBLEM! WE NEED BLUETOOTH AT WORK! Apple has simplified many things in life, but it has bluetooth connectivity completely SCREWED UP.

  And the iPhone is not intended to be connected to a computer via Bluetooth.

• WNDR4500v1 runs slow for all devices Android wifi connected within 24 hours

  Firmware # V1.0.1.40_1.0.68

  Wireless security: WPA2-PSK AES]

  Channel mode: Auto

  Affects: all Android smartphones and tablets connected to standard wifi router. Computers laptops connected wifi or any cable/hard-connected computer not affected.

  Symptoms: Any Android device after a period of 12 to 24 hours when trying to access the Internet via wifi of this router will be very slow. Its only when I restart or turn on the router power switch it restore then this speed until a permanent 12-24 h all Android devices will return to its slowness.

  Anybody with an explanation, because it makes no sense. What started without reason during the few months but the router had no update firmware of a year +.

  Why don't reboot the router thus made all Inet speed to all Android devices, but then after X number of hours become so slow brutually until the router must restart another?

  Nice... guess I should understand this beast almost 5 year, gave up the ghost and his time comes essentially to choose between Asus or Netgear based out of sites like smallnetbuilder.com I want a router v.powerful of AC3xxx or AC5xxxx. Wanted to wait the next Wifi standard replace AC but that takes too much time.

• Tipo de Xperia Will get android 4.1 jelly bean

  I use Sony Xperia type it. Type users can get android 4.1 jelly bean

  Hi Agnes,.

  Sony mobile phones have their own separate community and are therefore better qualified to deal with problems or questions, you can have on Sony mobile phones. You can visit the community Mobile Sony here:

  http://talk.sonymobile.com/community/support

• Internet sharing for android device connection

  Follow the instructions in microsoft to allow an android device to connect via USB to a windows 7 Home premium machine.  On the network & sharing page I don't manage the network wireless but no physical connection.  How can we do from here?

  Hello

  I suggest you for the link and check if that helps:

  Using ICS (Internet Connection Sharing)

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing

  Change the settings for ICS (Internet Connection Sharing) Internet

  http://Windows.Microsoft.com/en-us/Windows7/change-Internet-settings-for-ICS-Internet-connection-sharing

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• Series Deskjet 1510: 1510 Deskjet Wireless connection

  My old computer has moved house from behind.    Cannot configure a wireless connection with 1512, connecting to the new computer

  No 1510 is connected as wireless on my new computer.    Thought it would work wireless.    Had two computers on USB.

  Manual of HP is THREE pages of small.

  I'm a "Rookie" 67 year old

  Thank you

• PhotoSmart 6510 E: all-in-one Photosmart 6510 series is no longer able to connect

  I have recently inherited this printer and eventually got it working a few days ago. Now, I'm more able to print wireless from my computer.  My computer recognizes the printer and I have the ability to print with it, but for some reason any, he says: my printer does not respond when you try to print wireless from my computer. I can print by sending documents to the e-mail address of my printer, however. WiFi is configured and works according to the configuration page I printed.

  Any thoughts?

  Hey @reyn5013,

  Welcome to the Forum from HP Support.

  I understand that you are unable to print from Mac with your HP 6510 Photosmart e-all-in-one printer. I would like to help.

  I recommend you try the following steps:

  • Uninstall your printer - click here for instructions.
  • Fix permissions of the disc on your Mac - click here for instructions.
  • Once you have finished running the utility above, restart your computer.
  • Finally, click here to reinstall your printer.

  Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by clicking to accept this solution.

  Thanks for posting in the Forum from HP Support. Have a great day!

• Connection to a mass flow of the FVL-2612 of Omega controller

  Hello

  I have an Omega FVL 2616 (0-500 SLM) mass flow control. I'm putting in place through LabView for most flow record. The manual for the unit account documentation to use HyperTerminal, that works.

  I tried using the wizard Instument IO, but in vain. I have the connection established a RS232 connected to COM1 on the back of the PC. When I select this devicea and indicate the Wizard "read and analyse" it just times out.

  I'm not the most savvy with LabView, but get a grip on the basics.

  I'm looking to retrieve a scroll bar to control levels of flow and a feed for actual throughput that can be stored in a document.

  Baud: 19200

  parity: no

  Bit: 8

  stop: 1

  Any help would be greatly appreciated.

  Concerning

  Edwards_NSG,

  I suggest using the basic read and Write.vi series.  This can be found in the finder of the example.

  If you want to use the wizard of I/O (I think that the example will be really easy) you don't have to send some sort of command to the device?  If so you have a writing stage in the wizard of e/s?

• Connect as a massive storage

  I would like to know how can I connect my K1 to my laptop as storage massive o something like that if I can just drag photos, movies, applications, etc. and download the videos, photos and all I want without the tools of lenovo, which I think helps not so much. is more limiting than helping the manipulation of the K1.

  -J' have win XP BTW.

  So, what can I do to download the photos from the K1 to my laptop? I can also connect via WiFi as it says in the tutorial to connect via USB and WiFi.

  Win XP SP3 is the minimum required.