the ruuber in my canon 7 d clings to the wide

Similar Questions

• Back to the widi r7-571

  Ok. The r7 is advertised as being capable of widi. I know that's not the broadcom adapter. So I happened to have a processor intel advanced n6235 or two sitting and jumped in. The wireless works fine. Bluetooth does not even appear in the Device Manager. And without ability of widi. Although the check utility intel widi does no upgrade needed. But it says the same thing with the installed broadcom. I can't find anything showing a difference at the level of the pci-e material between the cards. Just talking about bios of some possible oem on a whitelist for some manufacturers. But in this case the intel should not work at all. Any ideas? Even if there was a difference in the interface, I would buy another card. But the 6235 is a solid card I have used quite awhile now, everything's supposed half work in this laptop. And I don't know what other card works better anyway. Thank you.

  Ok. Ive heard stories of people lose widi connectability after upgrade to windows 8.1. So I reinstalled back to windows 8, put my intel advanced n-6235 back, updated drivers and installed the widi windows application 8. Run this application, I know to connect to my netgear ptv3000 widi, and my screen is finally connected wireless on my 42 inch TV. For once for all certainly is possible on an r7-571 acer with windows 8.

• Show only in the middle of the wide screen monitor webites

  I have a 25 inch wide HP - LCD HD monitor, since installation, Firefox AND Google Chrome only display the page in the center of the screen all scrunched up, there is nothing on both sides of the screen but the white color of the Web page I'm on (including this page), this only happens in Firefox and Google Chrome, Internet Explorer (which I can't stand) shown in the image on the screen in the same way it would on one normal monitor 19 inches

  I tried full screen and it does not fix the problem at all, it is remove the address bar and menu and the image is still in the middle of the screen just crumpled, the attached image shows what look like most all web pages (the image displayed is the page I am currently able to post my question as I just took a screenshot) , on the only page that seems normal is each page in Internet Explorer, the pages I visit in Firefox and Google Chrome, like eBay, Craigslist and any forum I'm going, looks like the attached image, once, this happens only in Firefox and Google Chrome, I just (yesterday) was installing a reformat full and fresh, Windows 7 Professional 64 bit and SP1 , it's the same problem that I had before the reformatting and the new facility, it's the 36.0.1 Firefox Version and he said its updated, I tried all settings, including zoom and text zoom, with he does nothing to broadcast the image on the screen as it is MUST

  Any help would be appreciated... Thank you... Jim

  Well for some reason, I just reinstalled the video drivers after reformat, I did a few days ago, the pages seem to be more normal looking, when I click on images that they are not distorted, so I have no idea as to why pilots have nothing before, but this time worked

  In any case, so far it seems to work as it should, and I have a more or less complete vision

• The pages are at the wide. eBay, PayPal use Internet Explorer only.

  eBay and PayPal (both companies eBay) State they only use Internet Explorer as their official browser. When you view sites like the PayPal home page and some ads from sellers on eBay, the page is not formatted to display the entire page without having to scroll the width of the page to see the entire page.

  Also as a seller I've had trouble with my pictures not showing in Firefox. I've done some searching about this problem, and others have too. What I come up with is that its eBay only supporting Internet Explorer. I'm wondering if Firefox has a fix for this issue???
  

  I was at both sites without problem. The whole page is too big?
  Printing / photos? Have you tried to adjust the zoom settings?
  
  < control > and (+) = greater / smaller = (-) / (0) = default restore.

  ================================

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Adjust the URL boxes &amp; search on the Navigation bar for different widths and the wider area of URL provider.

  Years my URL address in the Navigation bar has stretched far enough to allow most of the display URL. An icon and then reload, the box of search engines (Bing, dictionary, etc.) would be about one-third of the width the area URL. After that, the rest of the bar is used for House/bookmarks/history/etc
  Now, without knowing when it emerged, the URL box is too narrow to see but a few letters of the URL that is registered and its menu drop-down is the same. I can find no way to expand it. Everything works fine, but I would like to have the views appearing as before. I kept all the most recent updates and version 20 now. I don't think that has happened because of the update - at least not immediately. As this happened, my Bookmarks Toolbar disappeared. I made sure that the bar has been verified and manually put all the bookmarks that I had. It's OK now. I thought that the way back that could replace the cursor to a point on the side of the boxes in the Navigation bar and get an arrow icon that would expand or restrict the boxes. I'm not sure about that, but I know that it doesn't work like that now. Any help would be certainly appreciated! Thank you.

  I did not send photo since the default restore and put back old icons worked this time. I had tried with attention before, but the spinner was still missing then. Thank you for your help. CFB-

• MacBook screen is not unique to the wide

  Hi, my macbook pro screen is not clean, I used a lot of products, but those cleaning silver stuff won't disappear from the screen, I have no idea what to do, help please

  "I used a lot of cleaning products.

  Cleaning products may be causing the problem.

  • Use only a soft, lint cloth. Avoid abrasive cloths, towels, paper towels and other similar objects that may cause damage. "

  Above in this article to support information > cleaning of your products Apple - Apple supported

• Satellite A100-570 slow downs the wide connection band

  I have a laptop Satellite A100-570. I bought this in July antiques.

  Just open the laptop, not even connect to the internet it manages reduce my speed on broadband.
  I know this because I'm doing a test of speed before and after the opening of the laptop using my PC.

  Computer laptop & PC are not yet in the same room!
  The wireless network connection is disabled, disabled 1394 connection and only LAN OK.
  (I use a BT Homehub, connected to my PC).

  My question is: how a laptop computer that is not on the internet brings to BB speeds.
  the laptop is o.k. otherwise.

  Any help appreciated.

  To be honest, the whole story is a little understandable and strange for me.
  Your laptop is connected to the router with a LAN cable or what?

  Sorry but I don't quite understand you. What is the speed with and without a cell phone?

  By the way: did you clean install of the OS before you start using this laptop?

• HP Pavilion 15-ak085na: could not find the WiDi WiDi/Pro Intel® for Windows software

  Hello

  When I install the "Intel® WiDi/Pro WiDi Software for Windows" software downloaded from https://downloadcenter.intel.com/download/25153/Intel-WiDi-Pro-WiDi-Software-for-Windows , he said:

  

  While they inspected the processor competebility intel I can see that it supports the wireless display.

  Can you please help me to be confirming that my dosent computer laptop 'HP Pavilion 15-ak085na' have support for wireless display or point me in the right direction to download the software.

  Thank you very much

  Youssouf

  Hello:

  You need a PC with an Intel HD graphics card that meets the specifications of widi

  You need a PC with an Intel processor that meets the specifications of widi

  You need an Intel wireless network adapter that meets the specifications of widi.

  Your PC should have all 3 of these items to run Intel Widi.

• Qosmio G40 - 10F: how conenct to the wide band of sky LAN

  I don't know anything about computers.
  I buy the G40 - 10F and get sky to wide band and they say that you need a spare ethernet on the computer.

  All I can find is RJ11 and RJ45 is the ethernet in a differnent name.
  If I can't do a link to broadband this portable ill save my money.

  Hello

  Don't worry man.
  Qosmio G40 supports all ports that are important in establishing the sky broadband.
  The RJ45 is the Ethernet port; known as port Lan ;)

  You can connect the modem to broadband from sky to this port using the LAN cable just ;)

  Hoe I could specify what ;)

• Urgent: iPhone 5s boots up the white Apple logo screen, then finally turned his back on the wide...

  So, my 5s has problems with a few apps, so as I normally do, I turned the phone off and tried to turn it back on. (Phone is recharged btw, so not to die because of this)

  When I tried to turn it back on, the phone went to the start screen normal white with the logo of apple in this regard. He stayed there for 10 seconds, then the screen turns off. I continued to try to make it, but with the same result. Then I tried turning on the phone, press and hold the power and the "home" button to reset, but after resetting, it just does the same thing and turned off after having been on the screen of white boot for a few seconds.

  I followed some advice online to hold down home button after trying the reset, or press and hold the volume up button after resetting. Nothing works.

  I tried to do a variation of all the things mentioned above, when you are connected to a power outlet, did nothing.

  I tried to connect the phone to my computer with iTunes open. the phone turns on the start screen, as if acknowledging a power source, but the computer does not recognize the phone and so I can't do anything to reset the phone or do any recovery options mode... because the computer does not even recognize the phone.

  Any ideas? Apple chat will not work for some reason any. I need serious help. I have a week huge lead and need a phone. Impossible to find ideas on the internet, as mine connects to the computer and will not even appear a glimpse of life other than 10 seconds on the start screen.

  My phone got very buggy lately, by habit when you're updating to the latest version of iOS, and I think that's probably the culprit.

  NEVER interrupted or damaged my phone at all, perfectly working physically.

  Hello

  Turn off the iphone

  Make sure that your PC is running itunes 12.3.2

  Connect the USB to your PC wire

  Power button press and hold down on iphone connect to iphone power button pressed

  Until the PC sees iPhone.

  Wait for the restore, you may need to do more than once before it works.

  If you still have problems to make an appointment on apple store.

  See you soon

  Brian

• Windows Server 2012 R2 Remote Desktop Server - user session crashes when you connect to the wide

  From time to time, a user session hangs during registration out of the Windows 2012 RDS.

  This has happened for two different users. Whenever the session hangs with the message "signature" and the user can not log such as they appear with the same message by.

  I connected to the RDS as administrator, checked the Task Manager and found that an office application always work, such as Excel.

  When I complete the process of the office application and disconnect the user through the Task Manager, the user can log in again.

  I reinstalled the desktop software and still happens from time to time...

  Any suggestions?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Media player 11 stops at the wide/close when I try to play streaming audio player or external ripped music.

  Just got a new PC.  XP pro, winplayer 11.  Open the drive, access stored external hardrive bookmarks/libraries, select ANY song, it starts to play (no noise, just the moving bar), and it gives me the dialog box "I am broken, do I have to send a report" immediately and closes.  To do this, with most of my Media Center radio station playlists as well.  Updated media information exchange, restarted (player and PC) with no resolution.

  You have no third-party plug-ins WMP installed? You can check through the tools - Options - plugins (press Ctrl + M, if you don't see the Tools menu). If there are third-party plug-ins, disable or remove it and check if the problem persists.

  If you have installed the codec, such as K-Lite packs, then I suggest that you remove these establishments.

  Tim Baets
  http://www.BM-productions.TK

• computer froze when you connect to the wide

  I had not changed anything on my laptop. For some reason when I tried to stop it but it froze in the registration form. The power button would not turn it off or do alt ctl led work. I had to pop in fact the battery to turn it off. Is that what I should be concerned or a problem somewhere, I need trouble?

  I would certainly run through the usual troubleshooting stop.

  Shutdown problems are usually caused by a program or process that won't come out gracefully. The program or process may be against malware, or may be legitimate (for example a pervasive like Norton or McAfee antivirus). If you use Norton or McAfee product, uninstall it and replace it with a better program like NOD32, Kasperksy or Avast (free). The Windows Firewall is enough for most people. Shutdown problems can also be caused by old/badly written drivers so make sure that all drivers are updated, especially on Windows Vista and Windows 7.

  A.the first step should always ensure that your computer is free of viruses/malware.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  B. If the computer is free of viruses/malware, the drivers are current, and no program Norton or McAfee is installed, then do boot minimum troubleshooting to see what program/process is the culprit:

  How to perform a clean boot in Vista and XP - http://support.microsoft.com/kb/331796
  How to perform a clean boot in Windows Vista or Windows 7 - http://support.microsoft.com/kb/929135

  C. Si you need more information, here's a troubleshooting utility excellent stop - http://www.aumha.org/win5/a/shtdwnxp.htm

  Standard caveat: If the problem is too difficult - and there is absolutely no shame in admitting it isn't your cup of tea - take the machine to a computer repair shop. This will not be your type of BigComputerStore/GeekSquad space of the place. Get recommendations from family, friends and colleagues.

  MS - MVP - Elephant Boy computers - don't panic!

• change the display of the wide screen to normal

  my laptop screen is very wide viewing.  I don't know if I pressed a button, but everything is great, as if it were the safe mode.  How can I change this back to normal?

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• I used to get the Blue error screen when you connect to the wide I did the registry clean, but now, when you connect the computer stops with no error message.

  How can I fix it? or what is wrong now?

  Hi Stelana,

  If I understand correctly, the computer turns off when you want to disconnect.

  This behavior may be caused by this security software on the computer, or the computer might be infected with the virus.

  To refine the question, I suggest you try the following steps:

  Step 1: Disable the security software and test, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once it's all done.

  Because this problem occurs after cleaning registry, critical registry keys may have been changed.

  Some programs available for free on the Internet may contain spyware, adware or virus. Only download and install programs from software publishers that you trust. Even if the website, that you download the program trust, you must also trust the Publisher of the program. For more information, see when to trust a software publisher.

  Please see the link below:

  Registry cleaners are needed?

  http://Windows.Microsoft.com/en-us/Windows-Vista/are-registry-cleaners-necessary

  Step 2: Run a scan online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  You can follow the steps provided by Vincenzo Di Russo MVP to get rid of malware on your computer, please click on here.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.