Cannot install the update of BIOS for my Qosmio F750
Hello
I downloaded QF750B200_EC120_WIN.exe bios update for my F750 and when I tried to run the update, it fails & I received the message:
"The AC adapter is not connected, or battery power is not enough.
Please connect the power adapter and charge the battery. »
However, the power adapter is connected and the battery is fully charged. Does anyone have ideas to make this work?
Thank you
Thanks for this interesting solution.
Tags: Toshiba
Similar Questions
-
I can't install the update of security for the Microsoft Visual C++ 2010 Redistributable Package (KB2467173).
According to Microsoft Update, the error code is 0 x 643.
I tried to install the update during a clean boot without result.
Here is the log: https://skydrive.live.com/redir?resid=DDC6388AB2460543! 117
Hello
Method 1
I suggest you to run the fixit from the following link:The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2
I would say you can do clean boot and install the update.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353Note: Make sure that you reset the computer back to normal once the diagnosis is complete.
Method 3
I suggest you to download and install the update from the Download Center.RTM of Microsoft Visual C++ 2010 redistributable MFC security update
http://www.Microsoft.com/en-US/Download/details.aspx?ID=21576Method 4
I suggest you try the steps from the following link:Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://support.microsoft.com/kb/322756
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. -
Cannot install the update of security for Windows XP (KB982665)
Original title: security update/install failures
Siena is a re-post using the appropriate format: when I check for Microsoft updates I hit the express tab and most of the time I get the message 'install (s)' didn't like in whne I tried to download and install the 'a security update for Windows XP (KB982665)." It is the rule, not the exception. What should I do, please? Thank you!
Hi ubancosr,
Try to download and install the update manually and check.
Update security for Windows XP (KB982665)
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Cannot install the update of security for XP (973768 KB)
I have problems to install the KB 973768 for Windows XP security update. Does anyone have a solution to this problem?
Hello
1. What is the exact error that you receive when you try to install the security update?
2 are all the other updates installed successfully?
3. who is the antivirus program installed on your computer?
Follow the steps mentioned below.
Method 1: This problem occurs especially if there are conflicts between the Windows security update and the application program on your computer, mainly the antivirus program.
Temporarily disable the antivirus program or the security on your computer and try to install the update.
Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2:
Step 1: If this does not help, put the computer in a clean boot state, and then run the update. Follow the steps mentioned in the article mentioned below.How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Please note: after troubleshooting, be sure to start your computer in normal mode.Step 2: Try to install the update to windows manually in the clean boot state.
Update security for Windows XP (KB973768)
http://www.Microsoft.com/en-US/Download/details.aspx?ID=74 -
My OS is Windows Server 2008 R2 x 64, since I can't found for the Windows Server 2008 Forum, so I post here. Sorry for that.
I get the error code is code 646 Windows Update has encountered an unknown error.
I tried to download the update locally and tried to install, but the attempt also fails.
Anyone faced this problem? Please kindly give me some advice. Thank you.
Best regards
cchitsiang
Hi Cchitsiang,
The question you have posted is related to the installation of the updates in Windows Server 2008 and would be better suited to the Microsoft TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en/category/WindowsServerI hope this helps.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I get the guests to install this important update, but it will not be installed. I followed the instructions of troubleshooting for error 737D, but it does not work.
Any suggestions?Error code when you use Windows Update or Microsoft Update to install updates on a computer on which SQL Server 2005 installed: "0x737D."
http://support.Microsoft.com/kb/978597Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
While were are at it, I have not been able to install this update, guard saying failed, and have also tried manual installation just in case you ask
A security update for Jscript 5.8 for Windows XP (KB971961)
See the section "How to get help" of http://support.microsoft.com/kb/971961
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Security customer includes home links page free security update support, too
https://consumersecuritysupport.Microsoft.com/For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot install the update of security for Windows XP (KB2686509)
original title: why my XP pro does not accept the following security update? Update security for Windows XP (KB2686509)
Hello
I'm not really very good which is why I chose to use automatic updates. I recently got 'updates are ready for your computer' and when I start to download it stops pretty quickly and said:
The following updates have not been installed.
Update security for Windows XP (KB2686509)
Is there a wat to fix this problem without needing to know the registrys etc.
Thank you
Mick
See my post on the third page of this topic which contains detailed instructions for anyone with this problem. Go to the bottom of this page and click Next until you get to page three.
Thanks for the update Mick. You should be able to double-click the file to open it in the command prompt. I did not write the script, so I can't tell you why you were unable to launch it by double clicking. Right click and choose to run it in command line will still work.
@ Icom756pro I do not work for Microsoft, then you would be best suited to forward your complaint directly to them. I understand your frustration, however. I can only recommend that you try the script that I've linked to page 1 of this topic. If this does not resolve the problem then simply hide the update. You should not be prompted to install later.
-
Performance of Norton Internet Security
A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>http://snipurl.com/164ypp>
Suggest you download and save the fix it.
Then close all open programs and browsers before running MSFix it 50461.msi.
-
Cannot install the update of security for MS Works 9
I tried to install this update over 90 times and it won't install and I get an "unknown error code. Any ideas?
Give it a try and see if it solves the problem:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c7d16677-808F-43D5-b7e1-e22ab3d75d83> -
Cannot install the update of security for SQL Server SP3 (KB970892)
Whenever I try to install this pack I get the 737D error code
For this type of update, suggest that you post on this forum:
The SQL Server installation & set program at level
http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/ TaurArian [MVP] 2005-2010 - Update Services -
Cannot install the update of security for Vista (kb2479943).
I get the error code 80070643. tried to repair of .net framework windows suggestions. for the two sp1 3.5 and 4. I also uninstalled and reinstalled the .net Framework. I run microsoft 2007 office. any help on what I can do to get this security update to install would be appreciated. Thank you. Michelle
Hi Chelleabelle,
One of the solutions proposed should help to solve the problem and see the answer in the following thread:http://answers.microsoft.com/en-us/protect/forum/protect_updating/windows-update/5b222491-1674-483b-b296-211fc3c3170e. Frankly, I bypass the first step and start with the second stage if this is the only update, you are having issues with that.
I hope this helps.
Good luck!
-
Cannot install the update 5.7 for cs4 raw
RAW 5.7 update for cs4 will not install. Stop in the middle of the installation and ask to close the bridge when it is not open. Vista operating system. Thanks to all who can help.
You have probably the bridge open in the background, open the Task Manager, switch to the processes tab and close Bridge.exe
-
In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem
0X8007000D ERROR_INVALID_DATA
Try to manually download the update and installation
http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basicIt will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services
-
I get the error code 8024002d message when you use Windows Update to install the update of security for Director 2.6 for windows vista. It try to install then a window pops up saying: he cannot locate a file called "MM26_ENU [1] .msi '. I have serached my PC and no such file exisits. Grateful for any help. This is supposed to be an update of important safety for Movie Maker.
Alan McC
Do you have other accounts of users on this PC? If you install this update from the main account?You should get the number of the update of the updated history list and then download the file here: Microsoft downloads.
If sure that nothing else is running, and then install the update manually. Give it a try and let us know the results.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Reference QuickTime Movies on Windows PC?
Now that Quicktime is not a good idea on Windows, how do you manage a sequence of reference created by Quicktime Pro? I created a couple for my site for years but the reference film (which is the type of file. MOV) can be played with Windows Media 1
-
I want to convert windows 7 for xp professional can someone help me?
I want to convert windows 7 for xp professional can someone help me?
-
sorting of the column 'To' of windows live mail is not sort correctly
Windows Live Mail email sort problem I'm trying to sort email in the "To" column, but it does not properly sort by the name of the recipient. In fact, the kind that result is meaningless.
-
This process will modernize my A1to 4.0
I found this on a blog site, the file download and procedure. I wonder if it actually works. I don't want to try it and my A1 brick. http://techno-Pro.blogspot.ca/2012/06/tutorial-install-Android-ice-cream.html
-
The mouse and the keyboard doesn't work do not after Windows 7 update
I have Windows 7 Home Edition. My CPU is the last Windows Update during the night, now the keyboard and the mouse do not work. I rebooted and unplugged both several times. I go back to my login screen, but I can't do anything from there.